#print¶

Keywords by Co - Occurrence¶

#concrete (2007) #cement (610) #property (464) #material (452) #base (450)

1. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
   Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence
2. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
   Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
3. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
   Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
4. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
   Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
5. Liu Xingzi, Buswell Richard, Cavalaro Sergio, Xu Jie et al. (2026-01)
   Influence of Inter-Filament Voids on the Failure Mechanism and Compressive Strength of 3D Printed Concrete
6. Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
   Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders
7. Mu Xiaoshao, Zhang Xiaoling, He Gang, Liew Kim (2026-01)
   Toward Low-Carbon 3D Concrete Printing Through Circular Construction and Waste Valorization
8. Sawicki Bartłomiej, Chen Zhuo, Leusmann Thorsten, Kloft Harald (2026-01)
   Shotcrete 3D Printed Reinforced Concrete Beam:
   Design, Testing, and Comparison Against Conventional Cast Reinforced Concrete Solution
9. Alawadi Fatemah, Murphy Martina, Eadie Robert (2026-01)
   Challenges and Solutions for Scalability of Affordable Housing:
   A Literature Review on 3D Printed Construction in Kuwait
10. Norouzi Yasaman, Dixit Manish (2026-01)
    A Review of Advantages and Challenges of Using Hempcrete for 3D Printing in Construction
11. Alessandro Antonella, Sousa Israel, Ubertini Filippo (2026-01)
    Sensitive Concretes for 3D Printed Structures:
    First Physical and Electromechanical Characterization
12. Kiyani Muhammad, Kamal Muhammad, Hussain Syed, Emaan Rajja et al. (2026-01)
    A Novel Arch Infill for 3D Concrete Printed Beams:
    A Comparative Study of Flexural Performance Against Truss and Solid Designs
13. Driouich Anas, Dalconi Maria, Franchin Giorgia, Bettanini Carlo et al. (2026-01)
    Optimization of Alkali-Activated Regolith Simulants for Lunar Construction by 3D Printing
14. Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
    Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
15. Lin Yilin, Zeng Tao, Wang Yuting, Li Dehui et al. (2026-01)
    Printable and Mechanical Properties of 3D-Printed Nano-Silica Modified Concretes
16. Liao Minmao, Sun Xiao, Chen Zhaohui (2026-01)
    Simultaneous Topology and Path Optimization for 3D Concrete Printing Based on Discrete Frame Structures
17. Kechagia Aikaterini, Tzounis Lazaros, Kechagias John (2026-01)
    3D Printing Concrete:
    A Short Review of Systems and Materials
18. Ding Tao, Lian Hongqian (2026-01)
    Buildability Analysis of 3D Concrete Printing:
    A Finite Element Model Incorporating Segment-by-Segment Activation, Nozzle Constraint, and Extrusion Pressure
19. Zhang Xin, Xu Xinglong, Liu Xianda, Sun Junbo et al. (2026-01)
    Enhancing Electromagnetic Wave Absorption in 3D-Printed Concrete with Superabsorbent Polymers for High Performance
20. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
    Evaluating Glass Powder Substitution for 3D Printed Concrete:
    Effects on Thermal Properties and Embodied Carbon
21. Agegn Adamu, Regassa Yohannes, Angassa Kenatu, Mekonnen Kebede (2026-01)
    Systematic Review on 3D Concrete Printing Technology:
    Breakthroughs and Challenges
22. Zhang Junyi, Zhang Chao, Chen Tiefeng, Li Ruisen et al. (2026-01)
    Biochar as the Rheological Modifier in Three-Dimensional Printed Concrete
23. Zhang Chao, Zhang Junyi, Su Yilin, Zhang Yuying et al. (2026-01)
    Low-Carbon 3D-Printed Concrete by Using Biochar as a Carbon Sequestrator
24. Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
    Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
    Technique Development and Bond Behavior Characterization
25. Tushar Fazlul, Hasan Mehedi, Hasan Kamrul, Mawa Jannatul et al. (2026-01)
    Factors Affecting Flowability and Rheological Behavior of 3D Printed Concrete:
    A Comprehensive Review
26. Costa Gabriel, Maas Pyetra, Doerner Gabriel, Nazário Samara et al. (2026-01)
    Reducing the Cement Content in 3D Concrete Printing Mixtures Through Porcelain Polishing Residue Incorporation
27. Liu Zhenbang, Li Mingyang, Wang Sizhe, Deng North et al. (2026-01)
    Investigation on Bond-Slip Performance of Steel Rebar Embedded in Concrete Confined by 3D Concrete Printing Formwork
28. Dubey Pratik, Maurya Madan (2026-01)
    A Comprehensive Review of 3D Printing in Construction:
    Technology, Materials, and Digital Workflow
29. Nguyen Nhat, Javan Kazem, Jordan Adam, Akbarnezhad Ali et al. (2026-01)
    Techno-Economic Analysis of 3D Printed Modular Housing:
    Productivity, Cost, and Environmental Assessment
30. Sheng Zhaoliang, Ding Shaolong, Zhu Binrong, Cai Jingming et al. (2026-01)
    Bonding Performance of Toothed Interfaces in 3D Printed Alkali-Activated Concrete
31. Gil-Lopez Tomas, Amirfiroozkoohi Alireza, Valiente López María, Verdu-Vazquez Maria (2026-01)
    The Impact of 3D Printing on Mortar Strength and Flexibility:
    A Comparative Analysis of Conventional and Additive Manufacturing Techniques
32. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
    Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
33. Talukdar A., Belek Fialho Teixeira Müge, Fawzia Sabrina, Zahra Tatheer et al. (2026-01)
    Investigation on the Fresh and Mechanical Properties of Low Carbon 3D Printed Concrete Incorporating Sugarcane Bagasse Ash and Microfibers
34. Dao Trang, Chau Vinh, Tran Jonathan, Tran Mien (2026-01)
    Balancing Workability, Buildability, and Carbon Sequestration in 3D Printed Concrete via Direct CO2 Mineralization
35. Ribeiro Elis, Rangel Bárbara, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
    Improving Natural Ventilation Through 3D Concrete Printing
36. Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
    Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements
37. Cojocari Iulia, Martins Mirna, Rangel Bárbara, Cunha Jaime (2026-01)
    Scaling 3D Printing for Large-Scale Production by Optimising Workflow
38. Teixeira João, Jesus Manuel, Rangel Bárbara, Maia Lino et al. (2026-01)
    Expanding 3D Concrete Printing Customization with Biomimetic Textures
39. Cárdenas Valeria, Parmigiani Silvia, Vargas Juan, Restuccia Luciana et al. (2026-01)
    Incorporation of Vitrified Ashes in Lightweight Foamed Concrete for 3D Printing:
    Thermal and Mechanical Assessment
40. Bugarin Juan, Hajjar Ayla, Ssengooba Aloysious, Rangel Bárbara et al. (2026-01)
    Advancing Circular Bioeconomy and Sustainable Construction in the Iberian Peninsula:
    Addressing the Potential of Timber Residues for 3D Printing
41. Gnanaraj Anies, Moreno Leyla, Thabet Reham, Rangel Bárbara et al. (2026-01)
    Comparative Analysis of Onsite Versus Offsite 3D Printing in Construction:
    Benefits, Challenges, and Case Studies
42. Nadais Mariana, Cunha Rui, Pessoa Ana Sofia, Delgado João et al. (2026-01)
    Enhancing Indoor Environmental Quality Through Real-Time Monitoring:
    A Case Study of a 3D-Printed House
43. Melero-Tur Sofía, Jiménez-Guerrero Adriano, Pérez-Fenoy José, Barbero-Barrera María (2026-01)
    Re-Imagining the Production of 3D Printed Ceramics Through the Incorporation of Waste Materials
44. Cunha Jaime, Rangel Bárbara, Vilas-Boas Rodrigo (2026-01)
    Evaluating the Environmental Efficiency of on-Site and Off-Site 3D Construction Printing:
    A Roadmap Towards Sustainable Building Practices
45. Jesus Manuel, Lopes Joana, Teixeira João, Guimarães Ana et al. (2026-01)
    Application of Self-Cleaning Products on 3D-Printed Building Elements:
    An Experimental Study
46. Aden Abdishukri, Nuñez Montoya Alejandra, Ponce Josef, Rangel Bárbara et al. (2026-01)
    FAB-BIO:
    A Review of Bio-Based Materials Applied on 3D-Printed Living Walls
47. Reis Rui, Aroso Francisca, Brandão Filipe, Camões Aires et al. (2026-01)
    A Systematic Review on the Durability of 3D-Printed Cementitious Materials:
    Insights and Research Challenges
48. Lapusan Ciprian, Negrutiu Camelia, Sosa Ioan (2026-01)
    Multi-Criteria Decision Framework for Optimal Robotic System Selection in 3D Concrete Printing
49. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
    Towards Low-Carbon Construction:
    Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
50. Ding Yao, Liu Yifan, Yang Bo, Liu Jiepeng et al. (2026-01)
    Application of Artificial Intelligence Technology in 3D Concrete Printing Quality Inspection and Control:
    A State-of-the-Art Review
51. Pal Biswajit, Chourasia Ajay, Tomar Milan, Pradeep Kumar (2026-01)
    Influence of Interfilament Bond Characteristics on the Load–Deflection Behavior of 3D Printed Beam:
    A Numerical Study
52. Sahai Rajan, Bisht Ravindra, Malik Lavanya, Rahman Mohamed et al. (2026-01)
    Strength Evaluation of 3D Concrete Printed Layers Using in-Situ Parameters Monitoring
53. Bassi Utkarsh, Sahai Rajan, Bisht Ravindra, Verma Yash et al. (2026-01)
    Design Analysis and Development of a Benchtop 3D Concrete Printer
54. Jenny David, Cutajar Sacha, Chan Yen-Fen, Jenny Ercan et al. (2026-01)
    Earth-to-Earth:
    Ultra-Thin 3D-Printed Clay Formwork for in-Situ Earth-Casting
55. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
56. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-01)
    Experimental Investigation on the Mechanical Performance of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
57. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
    Adaptive-Binder-Aggregate Mixing (ABAM):
    Concept for Extrusion-Based Multi-Material 3D Concrete Printing
58. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
    Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
59. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
    Next-Generation Green Construction:
    3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
60. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
    Evaluating Compressive Strength in 3D-Printed Concrete Structures:
    A Comparative Study of ANSYS Simulations and Experimental Data
61. Cong Long-Yu, Zhang Fang, Qian Yong-Jiu (2025-12)
    Flexural Behavior Investigation of RC Beams with FRP-Reinforced 3D-Printed ECC Permanent Formwork
62. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
    Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
63. Cui Xiaoshuang, Pu Xianghao, Zhang Dongyang, Li Weihong et al. (2025-12)
    Study on the Mechanical Properties of 3D-Printed Continuous Jute Yarn-Reinforced Concrete
64. Aabbas Mohamed, Mazian Brahim, Ahachad Mohammed, Zoghlami Aya et al. (2025-12)
    Sustainable 3D Printed Clay Bricks Incorporating Coffee Waste:
    Toward Circular Economy in Construction
65. Kim Seung, Kim Jae (2025-12)
    Vibration-Assisted Rheological Control for 3D Printing of Precast Concrete Modules
66. Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
    Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
67. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
    Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
68. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
69. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
    Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
70. Rodriguez Fabian, Vugteveen Caiden, Fross Xavier, Wei Hui et al. (2025-12)
    3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments
71. Deetman Arjen, Suiker Akke (2025-12)
    Characterization of Early-Age Elastic–Plastic Properties of 3D Printed Materials Using Indentation Testing
72. Muñoz-Sanguinetti Claudia, Vega-Coloma Mabel, Letelier Viviana, Marrero Madelyn et al. (2025-12)
    Environmental Footprint of 3D-Printed Concrete Using Recycled Materials
73. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
    Polymer-Enhanced Composites for 3D Concrete Printing:
    A Review of Materials, Processes, and Performance
74. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
75. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-12)
    3D Printing of Simulated Lunar Soil Geopolymer and Analysis of Its Weak Surface and Anisotropic Performance
76. Wang Xiangyu, Li Baidian, Wu Fei, Gu Kan et al. (2025-12)
    Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings
77. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
    Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
78. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
    Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
79. Cárdenas Valeria, Vargas Juan, Fantucci Stefano (2025-12)
    Topological Optimization and Material Exploration for Improving the Thermal Performance of 3D Printed Prefabricated Wall Components
80. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
    Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
81. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
82. Cimini Jacopo, Meroni Lorenzo, Chiantore Mariachiara, Albicini Paolo et al. (2025-12)
    Addressing Challenges in Marine Algal Restoration:
    Lessons Learned from 3D-Printed Structures on Artificial Reefs
83. Ferrari Lucia, Rizzieri Giacomo, Ferrara Liberato, Franzoni Elisa (2025-12)
    Rheological Control of Cementitious Composites Incorporating Ceramic Wastes for 3D Printing Applications
84. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Inqiad Waleed et al. (2025-12)
    Exploring Knowledge Domains and Future Research Directions in 3D Printed Concrete:
    A Bibliometric and Systematic Review
85. Huang Qunyi, Huang Qingyu, Yang Hong, Zhang Jiahang et al. (2025-12)
    Research on the Workability of 3D Printed Fiber-Reinforced Concrete Materials
86. Liu Mei, Wang Huai, Li Yang, Li Xiulin et al. (2025-12)
    Post-Fire Mechanical Properties of 3D Printed Concrete Under Different Cooling Methods
87. Hurtig Karel, Čítek David, Holý Milan, Koteš Peter et al. (2025-12)
    Experimental Assessment of Durability in 3D Printed Cementitious Materials
88. Shaik Khaja, Perumalla Mallikarjun, Boilla Charan (2025-12)
    Topology Optimization with Experimental-Numerical Investigation of 3D-Printed Concrete Elements
89. Kamhawi Abdallah, Lin Yuxin, Watson Christopher, Barton Kira et al. (2025-12)
    A Framework for Process Anomaly Detection in 3D Concrete Printing
90. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-12)
    Effect of Aggregate-to-Binder Ratio on 3D Printed Concrete:
    Printability, Mechanics, and Shrinkage
91. Slavcheva Galina, Levchenko Artem, Artamonova Olga, Karakchi-Ogli Davut et al. (2025-12)
    Mechanical Behavior and Reinforcement Efficiency of 3D Printed Concrete Under Compression, Tension, and Bending
92. Xiao Wei (2025-12)
    Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
93. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
94. Skoury Lior, Asaf Ofer, Sprecher Aaron, Menges Achim et al. (2025-12)
    Data-Informed Digital Twin for Large-Scale 3D Printing in Construction
95. Okangba Stanley, Ngcobo Ntebo, Mahachi Jeffrey (2025-12)
    Bridging Innovation and Governance:
    A UTAUT-Based Mixed-Method Study of 3D Concrete Printing Technology Acceptance in South Africa
96. Gierlinger David, Hansemann Georg, Schmid Robert, Trummer Andreas et al. (2025-12)
    Design and Construction with 3D Concrete Printing
97. Subramaniam Kolluru, Maganty Sohanth, Kamakshi Tippabhotla, Ghandhi Dhruv et al. (2025-12)
    Design and Deployment of a Functionally Efficient 3D-Printed Concrete Bridge Developed by Form Optimization
98. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2025-12)
    3D Concrete-Printed Geocell for Reinforcing Unbound Granular Pavement Layers
99. Sun Yuhang, Yang Xiaojie, Liu Xiongfei, Ma Guowei et al. (2025-12)
    Coordinated Spray-Based 3D Printing of Reinforced Concrete Structure:
    A Multi-Angle Strategy for Blockage Mitigation
100. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
     Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
101. Baharlou Ehsan, Datta Ipsita, Ozbulut Osman (2025-12)
     Feasibility of 3D Printing Oyster Shell Waste Laden Hydrogel Inks for Developing Mycelium Composite in Architectural Materials
102. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
     A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
103. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
     Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
     A Systematic Review
104. Dörrie Robin, Megnet Manuel, David Martin, Dröder Klaus et al. (2025-12)
     Integration of Discrete Reinforcement Elements for Shotcrete 3D Printing of Complex Structures
105. Jacobi Ando, Zöllner Jan-Phillip, Hack Norman, Mai (née Dressler) Inka (2025-12)
     Encasement of Pre-Placed Reinforcement in Injection 3D Concrete Printing:
     The Effect of Rheology and Process Parameters
106. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Mustafa Ali et al. (2025-12)
     Passive Determination of Anisotropic Compressive Strength of 3D Printed Concrete Using Multiple Neural Networks Enhanced with Explainable Machine Learning (XML)
107. Deetman Arjen, Bos Derk, Lucas Sandra, Salet Theo et al. (2025-12)
     A Database Framework for 3D Concrete Printing
108. Hammoud Ahmad, Mohomad Yosef, Shomar Hasan, Masad Eyad et al. (2025-12)
     Data-Driven Framework for Printability and Geometric Quality Prediction in 3D Concrete Printing
109. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
     Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
110. Iqbal Imtiaz, Inqiad Waleed, Kasim Tala, Besklubova Svetlana et al. (2025-12)
     Strength Characterisation of Fly Ash Blended 3D Printed Concrete Enhanced with Explainable Machine Learning
111. Rojas Jorge, Hasanzadeh Sogand (2025-12)
     A Unified Workflow for Enhanced Efficiency in 3D Concrete Printing Using a 6 DoF Robotic Arm
112. Babajaniniashirvani Vida, Afsari Kereshmeh, McCoy Andrew (2025-12)
     Investigating Key Competencies for 3D Concrete Printing in Affordable Housing
113. Shilar Fatheali, Shilar Mubarakali (2025-12)
     Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
114. Tong Zhongling, Guan Qingtao, Elabbasy Ahmed, Ateah Ali et al. (2025-12)
     Empowering 3D Printed Concrete:
     Discovering the Impact of Steel Fiber Reinforcement on Mechanical Performance
115. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
     Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
     Insights from Acoustic Emission Characterization
116. Xu Fengming, Yu Jie, Teng Fei, Lin Xiaoshan et al. (2025-12)
     Application of Recycled Tile as Internal Curing Material in 3D-Printed Engineered Cementitious Composites
117. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
     Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
118. Sunny Akash, Jayaprakash Jaganathan (2025-12)
     Unveiling the Printing Success of Concrete 3D Printed Models:
     A Simulation Study with Voxel Print and Abaqus Using Design of Experiments
119. Han Seongho, Ahn Eunjong, Shin Myoungsu, Popovics John et al. (2025-12)
     Methodology for Surface Defect Assessment in 3D Concrete Printing Using Computer-Vision and Ultrasonic Testing Considering Structural Build-Up
120. Wang Hailong, Shi Yiqing, Sun Xiaoyan, Lin Xiqiang et al. (2025-12)
     Design, Multi-Scale Structural Analysis, and Construction of Modular Prefabricated 3D-Printed Concrete Residence
121. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
     Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
     Rheology and Mechanical Behavior
122. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
     Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
123. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
     Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
124. Liu Xinhao, Hu Jiajun, Xiong Guiyan, Cundy Andrew et al. (2025-12)
     Long-Term Durability and Degradation Mechanisms of 3D Printed Geopolymers (3DPG) With/Without Healing Agents in Marine Environments
125. Öztürk Ece, Ince Ceren, Borgianni Yuri, Nicolaides Demetris et al. (2025-12)
     Printability, Engineering Properties and Environmental Implications of 3D-Printed Cementitious Mortars Incorporating Hydrated Lime, Tile Powder and Accelerator
126. Cai Xianhuan, Chen Fan, Zhao Zhihui, Xiao Peng et al. (2025-12)
     Impact of Early Particle Characteristics on Rheology and Buildability in 3D-Printed Magnesium Silicon Potassium Phosphate Cement Incorporating Fly Ash
127. Sifan Mohamed, Upasiri Irindu, Poologanathan Keerthan, Popo-Ola Sunday et al. (2025-12)
     Fire Performance and Design of LSF Wall Panels with 3D Printed Concrete and Steel Lipped Channel Sections
128. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
     Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
129. Feng Hu, Yuan Xiang, Yu Zhenyu, Guo Aofei et al. (2025-12)
     Printability and Rheological Properties of 3D Printing Ultra-High Ductility Magnesium Phosphate Cement-Based Composites
130. Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
     Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements
131. Iqbal Imtiaz, Kasim Tala, Inqiad Waleed, Besklubova Svetlana et al. (2025-11)
     Effect of Metakaolin and Biochar Addition on the Performance of 3D Concrete Printing:
     A Meta-Analysis Approach
132. Tenesesku Vladyslav (2025-11)
     Technological Aspects of Fabricating a Reinforced Concrete Shell Using 3D Concrete Printing
133. Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
     3D Printed Concrete with Recycled Coarse Aggregate:
     Freeze-Thaw Resistance Assessment and Damage Mechanisms
134. Tao Jie-Lin, Hu Shengming, Duan Zhenhua, Jiao Dengwu (2025-11)
     Magneto-Responsive Flow Behavior and Early-Age Microstructural Evolution of 3D Printing Lightweight Concrete with Fly Ash Cenospheres
135. Mansouri Abraham, Mourad Bahaa, Birhane Bezawit, Denbel Nuhamin et al. (2025-11)
     Noncontact Measurement of Thermal Resistance in 3D Concrete Printing Building Envelopes Using Infrared Sensing and Arduino
136. Si Wen, Khan Mehran, McNally Ciaran (2025-11)
     Rheological Optimization and Mechanical Performance Assessment of High-Volume GGBS-Silica Fume Mortars for 3D Printing
137. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
     Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
138. Abbas Yassir, Alsaif Abdulaziz (2025-11)
     Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
     Interpreting Nonlinear Synergies Among Binder Components and Proportions
139. Fasihi Ali, Libre Nicolas (2025-11)
     Tip Penetration Test for Rapid in-Line Assessment of Static Yield Stress During 3D Concrete Printing Process
140. Solaiappan Kamesh, Foruzanmehr M. (2025-11)
     A Rheological Test Method for Determining the Printability Zone of Cementitious 3D Printers
141. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
     Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
     Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
142. Anastassiou Richard, Alvarado Rodrigo, Wegertseder Martínez Paulina (2025-11)
     Towards Climatomorphism:
     A Generative Optimization Framework for Climate-Adaptive 3D-Printed Free-Form Housing
143. Ruiz Pedro, Perez Pablo, Alvarado Rodrigo, Valenzuela Sebastián et al. (2025-11)
     3D Printing of Surrealist Dreams:
     Constraints, Failures, and Craftsmanship in 1:1 Digital Fabrication
144. Vargas José, Breseghello Luca, Silfwerbrand Johan (2025-11)
     Circular Hybrid Façades:
     Responsive Design of Thermally Efficient 3D Printed Concrete Skins on Reused Concrete Elements
145. Ruiz Pedro, Moreno Inna, Alvarado Rodrigo (2025-11)
     On the Tectonic Properties of 3D Printed Architecture:
     On the Tectonic Properties of 3D Printed Architecture
146. Özdemir Salih, Alaçam Sema (2025-11)
     Cognitive Ecosystem for Lifecycle-Adaptive and Sustainable 3D Concrete Printing
147. Álvarez Luisa, Fernandez Brian, Saldarriaga Federico, Romero Héctor et al. (2025-11)
     Development and Bioclimatic Evaluation of Parametrically Designed Geometries for 3D-Printed Concrete Walls
148. Yu Hao, Zhang Weiwei, Liew Jia, Yin Binbin et al. (2025-11)
     Simulating Material Flow and Extrusion Dynamics in 3D Concrete Printing
149. Geng Renyu, Jiang Jinming, Du Pengcong, Zhang Huiliang et al. (2025-11)
     Multiscale Thermal Optimization of 3D-Printed Walls:
     Integrating Structure, Material, and Process with Fire-Thermal Synergy
150. Nguyen Trang, Park Jaejun, Kim Dong-Hyun (2025-11)
     Impacts of Infill Patterns and Curve Types in 3D Printed Clay Walls
151. Meier Niklas, Herding Friedrich, Zetzener Harald, Mai (née Dressler) Inka et al. (2025-11)
     Surface Modification of Bulk Material for Particle Bed 3D Concrete Printing:
     Effect on Wettability, Porosity, and Mechanical Properties
152. Davar Saeed, Ma Zhanguo (2025-11)
     Improving the Mechanical Performance of 3D-Printed UHPFRC with Thermally Modified Carbon Fibers
153. Tulliani Jean-Marc (2025-11)
     Latest Developments in 3D-Printed Engineered Cementitious Composites:
     Technologies, Prospects, and Challenges
154. Soshinskiy Olexander, Rashkevich Nina, Shakhov Stanislav, Melnychenko Andrii (2025-11)
     Formulating a Calculation Methodology for Assessing the Strength Characteristics of Building Structures Constructed with a Construction 3D Printer
155. Gümrük Idil, Schröder Torsten, Wolfs Robert, Salet Theo (2025-11)
     3DCP-CI:
     Developing a Circularity Indicator for Assessing 3DConcrete Printed Architectural Designs
156. Sičáková Alena, Verčimák Dominik (2025-11)
     Lightweight Mixtures with a High Proportion of Recycled Fillers in Terms of 3D Printing Parameters
157. Khoury Eliane, Cheikh Khadija, Schutter Geert, Cazacliu Bogdan et al. (2025-11)
     Using Vacuum Mixing for 3D Printing of Mortars Made with Recycled Sand
158. Athira R., Sathyan Dhanya (2025-11)
     Review of 3D Printing Advancements in Geopolymer Concrete:
     Current Challenges and Future Directions
159. Manickavasakam Karnan, Huri Mohammed, Kharma Khaled, Hosan Anwar et al. (2025-11)
     Smart 3D-Printed Concrete:
     Recent Advances in Self-Sensing Mix Design and Functional Reinforcements
160. Bawab Jad, Dieb Amr, Hassan Hilal (2025-11)
     Preliminary Investigation into the Development of Cement-Free Composites Using Emerging Alternatives for 3D Printing
161. Korol Ewelina, Jenta Arkadiusz, Chaudhari Ojas, Wójcik Michal (2025-11)
     Experimental Investigation of Concrete Beams Under Bending, Manufactured with 3D Additive Printing Technology
162. Ebiloma David, Olatunbosun Olajumoke, Isang Inimbom, Aigbavboa Clinton (2025-11)
     Assessing the Effects of 3D-Printed Concrete for Sustainable Construction:
     The Stakeholders' Perspective
163. Ma Jiayue, Samarasinghe Don, Rotimi James, Zuo Kelvin (2025-11)
     Establishing Research Methods for 3D Concrete Printing Supply Chain Studies:
     Insights from Literature and Practice
164. Biswas Rajib, Saito Takahiro, Ito Atsushi (2025-11)
     Experimental Evaluation of a Novel 3D-Printed Permanent Concrete Formwork
165. Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
     Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation
166. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
     Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
167. Zhou Jiehang, Du Longyu, Wu Kai, Lai Jianzhong et al. (2025-11)
     Effective Factors and a Prediction Method on Extrusion Flow of 3D Printed Concrete
168. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
     Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
     Corrigendum
169. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
     3D Printed Concrete with Red Mud Incorporation:
     Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
170. Najm-Eddine Asmae, Abouelmajd Mohamed, Najm-Eddine Youssef, Erritali Ilham et al. (2025-11)
     Topological Optimization in 3D Concrete Printing Structures:
     A Review
171. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
     A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
     Design, Fabrication, and Compressive Properties
172. Banijamali Kasra, Martin Michael, Mascarenas David, Kazemian Ali (2025-11)
     Automated Inspection in Robotic 3D Printing:
     In-Process Geometrical Measurements Using Structured Light Machine Vision
173. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
     Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
174. Hasan Md, Xu Jie, Uddin Md (2025-11)
     A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
     Fresh Properties, Mechanical Performance, and Current Limitations
175. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
     Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites
176. Sun Yan, Du Guoqiang, Mudasir Maryam (2025-11)
     Rheological Investigations of Fresh Fiber-Reinforced Cementitious Composites Using Hydrophobic / Hydrophilic UHMWPE Fibers for 3D Concrete Printing Evaluation
177. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
     Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
     A Data-Driven Approach Based on Prior Experimental Studies
178. Adeel Muhammad (2025-11)
     Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
     A Comprehensive Review
179. Zhu Binrong, Liu Xuhua, Wei Yang, Pan Jinlong (2025-11)
     Predicting the Tensile Performance of 3D-Printed PE Fiber-Reinforced ECC Based on Micromechanics Model
180. Megahed Mai, Abou Zeid Mohamed (2025-11)
     Toward Sustainable 3D Concrete Printing:
     Assessment of SCM-Superplasticizer Interactions on Rheology and Buildability
181. Silva Neesha, Rajapaksha Upendra, Udawattha Chameera (2025-11)
     Tailoring 3D Printing for Personalized Housing:
     Selecting the Right Technology for Custom Home Construction
182. Givkashi Mohammad (2025-11)
     Durability of 3D Printed Concrete Containing Air-Entraining Agent:
     Evaluating the Importance of Carbonation Resistance
183. Lim Sean, Lee Junghyun, Bawarith Nuran, Paul Suvash et al. (2025-11)
     The Efficacy of Self-Curing Agents on Enhanced Internal Curing and Accelerated Carbonation with CO2-Steam Integrated 3D Concrete Printing
184. Bates Rhys, Aslani Farhad (2025-11)
     Performance of 3D-Printed Concrete Columns with GFRP Rebars Under Axial Compression
185. Zeng Jun-Jie, Jiang Yuan, Yan Zitong, Sun Hou-Qi et al. (2025-11)
     3D Printing of Continuous Carbon Fiber-Reinforced Polymer Reinforcement for Concrete Columns
186. Lu Qi, Hua Sudong, Yue Hongfei (2025-11)
     Effect of Spherical Electric Arc Slag on Solid Waste-Based 3D-Printed Concrete
187. Xu Shuhao, Lin Xing-Tao, Chen Xiangsheng (2025-11)
     Numerical Investigation of Anisotropic in 3D Printed Concrete Specimens Considering the Effects of Weak Interfaces and Pore-Induced Defects
188. Song Qiang, Zhou Guangyu, Bao Hailing, Liu Qiong (2025-11)
     Study on the Effects of Nozzle Proximal Carbonation Mixing and Vacuum Dewatering on the Printability and Mechanical Properties of the 3D Printed Construction Mortar
189. Diggs-McGee Brandy, Samouh Hamza, Garg Nishant (2025-11)
     Predicting Cementitious Set Times via Infrared Thermography:
     Potential Implications on Real-Time Quality Control During 3D Concrete Printing
190. Zhu Xiaowei, Zhang Xudong, Zhang Jicheng, Chen Miao et al. (2025-11)
     Study on Anisotropic Thermal and Mechanical Properties of 3D-Printed Scrap-Aerogel-Incorporated Concrete
191. Sun Yuhang, Li Chuang, Liu Xiongfei, Wang Li et al. (2025-11)
     Enhancing Sulfate Resistance of Spray-Based 3D Printed Recycled Tunnel Slag Concrete Through Polypropylene Fiber Optimization
192. Nakase Kota, Zhou Yubao, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2025-11)
     Acoustic Emission Monitoring of Fracture Behaviour of 3D Printed Concrete with Different Printing Paths
193. Pandum Jeero, Hashimoto Katsufumi, Sugiyama Takafumi, Nakase Kota (2025-11)
     AI-Driven Evaluation of 3D-Printed Concrete:
     Analyzing Printed Patterns Using Impact-Echo and Acoustic Emission
194. Liu Xiongfei, Wang Haonan, Chen Jinnan, Sun Yuhang et al. (2025-11)
     Fiber Orientation Control in Spray-Based 3D Printed Steel Fiber Reinforced Concrete
195. Changez Kashif, Aslam Jawad, Bhutta Muhammad, Butt Shahid (2025-11)
     Hybrid Additive Strategies for Sustainable 3D Concrete Printing:
     Balancing Printability, Early-Stage Strength, and Eco-Efficiency
196. Maroszek Marcin, Rudziewicz Magdalena, Shah Syed, Tran Doan et al. (2025-11)
     Development of Eco-Friendly Construction Materials for 3D Printing Using Fly Ash and Demolition Waste
197. Zhang Hui, Wu Jie, Huang Bo-Tao, Yu Rena et al. (2025-11)
     Cross-Scale Mechanisms of Anisotropy in 3D-Printed Ultra-High-Performance Concrete
198. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-11)
     Examining the Multi-Scale Toughening Mechanisms and Mechanical Anisotropic Behavior of 3D Printed Concrete Reinforced with Calcium Sulfate Whiskers and Mixed Fibers
199. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-11)
     Influence of Alternative Supplementary Cementitious Materials and Printing Parameters on the Mechanical Properties of 3D-Printed Mortars
200. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2025-11)
     Data-Driven Design of Sustainable LC³ for 3D Printing with Omani Clays
201. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
     3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
     Fresh, Mechanical, and Microstructural Properties
202. Sakolaree Natthanicha, Taweesint Jutamas, Sungsiri Krisana, Assawamankongcharoen Sirikamol et al. (2025-11)
     Evaluation of Fresh and Mechanical Properties and Shrinkage of Hydrophobic Mortar Containing Microfiber for 3D Printing Technology
203. Janani Parthiban, Ganesh G. (2025-11)
     Synergistic Effects of Polypropylene Fibers on the Strength and Durability Properties of 3D Printed Concrete
204. Tang Jiyu, Wang Zhihang, Gao Danying, Yang Lin et al. (2025-11)
     Research Progress on 3D Printed Geopolymer Concrete
205. Matos Ana, Milheiro-Oliveira Paula, Varum Humberto (2025-11)
     New Technologies for Earth Construction:
     3D Printing, a Reality or a Mirage?
206. Dörrie Robin, Lachmayer Lukas, Baghdadi Abtin, David Martin et al. (2025-11)
     Investigation on Process Guidelines and Geometric Capabilities for Robust Shotcrete 3D Printing
207. Mani Aravindhraj, Sekar Muthu (2025-11)
     Extrudability in 3D Printing:
     A Comprehensive Approach to S/C, W/C Ratios and Superplasticizer Content
208. Hasani Alireza, Dorafshan Sattar (2025-11)
     Evaluation of Fresh, Hardened, and Durability Properties of Three-Dimensional Concrete Printed Pipes
209. Marco Giancarlo, Yau Ho, Lombardi Davide (2025-10)
     Stress-Informed Non-Planar Slicing for 3D Concrete Printing
210. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
     Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
     Printability, Mechanical Strength, and FEM-Based Structural Assessment
211. Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
     Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers
212. Mostert Jean-Pierre, Kruger Jacques (2025-10)
     Numerically Optimised Filament Surface Topology Towards Maximum Bond Strength in 3D Printed Concrete
213. Matos Ana, Milheiro-Oliveira Paula, Pinto Nuno, Pimentel Mário (2025-10)
     Cementitious Mortars for Sustainable 3D Printing
214. Kim Young, Scoppa Martin, Haddad Madhar (2025-10)
     An Investigation into the Role of 3D Printing in Residential Buildings:
     An Emirati Housing Case Study
215. Zhi Yefan, Akbarzadeh Masoud (2025-10)
     Surface-Toolpath Twins of Shell Components in 3D Concrete Printing for Optimized Buildability and Surface Quality
216. Masri Abdullah, Vazquez Elaine, Haddad Assed, Najjar Mohammed (2025-10)
     Life Cycle Costing in 3D Printing:
     A Literature Review
217. Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
     Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation
218. Marco Giancarlo, Cheung Lok (2025-10)
     Real-Time Defect Detection, Analysis and Suggestion in Adaptive 3D Concrete Printing via Multimodal LLM Integration
219. Liu Renlong, Cheng Zhangqi (2025-10)
     Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
     Influencing Factors and Mechanisms
220. Kiński Wojciech, Siwicki Przemysław, Zieliński Jacek, Smater Michał (2025-10)
     Adaptation of a Large-Scale, Modular Printer-Milling Machine for 3D Printing from Concrete
221. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
     Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
222. González-Aviña J., Hosseinpoor Masoud, Yahia Ammar, Kohandelnia Mojtaba et al. (2025-10)
     Anionic Biopolymers to Enhance Concrete Rheological Properties for 3D Printing Applications
223. Öztürk Ece, Borgianni Yuri, Ince Ceren (2025-10)
     3D Printing in the Construction Sector:
     Identification of Key Topics, Technologies, Applications and Relevant Factors Discussed in the Literature
224. Bradshaw James, Balasubramanian Swathi, Si Wen, Khan Mehran et al. (2025-10)
     Towards Greener 3D Printing:
     A Performance Evaluation of Silica Fume-Modified Low-Carbon Concrete
225. Paul Suvash, Lee Junghyun, Tay Yi, Lim Sean et al. (2025-10)
     Unlocking the Sustainable Potential of 3D Concrete Printing with Large Aggregates and Steam–CO2 Curing
226. Haripan Vislavath, Senthilnathan Shanmugaraj, Santhanam Manu, Raphael Benny (2025-10)
     Printability Assessment of Concrete 3D Printed Elements with Recycled Fine Aggregate
227. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
     Durability Assessment of 3D Printed Cement-Based Materials:
     A RILEM TC 304-ADC Interlaboratory Study
228. Valeri Manuela, Sangiorgio Valentino, Cantagallo Christina (2025-10)
     From Traditional Materials to Geopolymers:
     History, Performance, Sustainability and 3D Printing Applications
229. Kul Anil, Kocaer Öznur (2025-10)
     Parametric Analysis of Design and Operational Parameters in 3D Concrete Printing of Wall Elements
230. Gao Shan, Li Tianyu, Yuan Jian, Nishiwaki Tomoya et al. (2025-10)
     Mechanical Properties of 3D-Printed Molybdenum Tailings Mortar
231. Mesoudy Mouad, Foulki Rida, Amegouz Driss (2025-10)
     3D Concrete Printing:
     Optimizing the Design of Interlocking 3D Printed Concrete Blocks for Fast and Sustainable Construction
232. Liu Junli, Zhang Shipeng, Hao Lucen, Wu Bo et al. (2025-10)
     Rapid Rheology Control and Stiffening of 3D-Printed Cement Mortar via CO2 Flash Mixing in a 2K Printing System
233. Ataei Sarah, Jafari Amirhosein (2025-10)
     Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
     A Case Study Analysis
234. Albostami Asad, Mohammad Malek, Ismael Bashar, Hamd Rwayda (2025-10)
     Optimized Strength Predictions for 3D Printed Fiber-Reinforced Concrete:
     Machine Learning-Driven Insights
235. Ding Yong, Kindler Robert, Cen Tianyu, Chen Xiulin et al. (2025-10)
     Valorization of Demolition Waste and Biomass Byproduct into Sustainable Building Materials via Carbon Mineralization and 3D Printing
236. Crook Thomas, Li Matthew, Buswell Richard, Allinson David (2025-10)
     Anisotropic Hygrothermal Properties of 3D Printed Concrete
237. Bakr Somahi, Cruz Marcos, Mayor-Luque Ricardo (2025-10)
     Cura Salad:
     Robotic Heated Spatial 3D Printing of Salt-Clay Composites for Health-Oriented Vernacular Architecture
238. Elselmy Rowan (2025-10)
     AI-Driven Cymatic Architecture:
     Integrating Generative AI and Sound Data for 3D Concrete Printed Façade Design
239. Mohamed Basem, Ahmad Lina, Carbone Carlo (2025-10)
     3D Printing Applications in the GCC Housing Market
240. Ke Zhijiang, Li Zichang, Chen Zhengfei, Xu Yao et al. (2025-10)
     Technological Advancements and Challenges of Robotic Arm-Based 3D Printing for Hydraulic Tunnel Lining
241. Shang Yuqing, Yu Zheming, Ma Wei, Wei Jun et al. (2025-10)
     Research on 3D Printing Materials and Printing Parameters of Basalt Fiber Reinforced Concrete
242. Ye Fan, Ren Xiaodan (2025-10)
     A Eulerian Circuit-Based Reinforcement Learning Path Optimization Method for 3D Concrete Printing
243. Jamjala Siva, Thulasirangan Lakshmidevi Manivannan, Reddy K., Kafle Bidur et al. (2025-10)
     A Critical Review on Synergistic Integration of Nanomaterials in 3D-Printed Concrete:
     Rheology to Microstructure and Eco-Functionality
244. Jamifar Vahid, Eskandari‐Naddaf Hamid, Dehestani Mehdi (2025-10)
     Optimizing Electric Arc Furnace Dust Utilization in 3D Printed Reinforced Cement Paste Using D‐Optimal Design of Experiments and Gray Wolf Optimization
245. Niu Huaxian, Yu Bo, Hao Ji (2025-10)
     CFD-Based Flow Field Analysis of Spiral Nozzles in 3D Concrete Printing
246. Simwanda Lenganji, David Abayomi, Gatheeshgar Perampalam, Olalusi Oladimeji et al. (2025-10)
     Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks
247. Bianco Nicola, Fragnito Andrea, Iasiello Marcello, Mauro Gerardo et al. (2025-10)
     Numerical Analysis of a 3D Printed Concrete Envelope Incorporating PCM Nanoparticles
248. Barry Mamadou, Jacquet Yohan, Perrot Arnaud (2025-10)
     Pocket Vane and Penetrometer as Quality Control Tool for Extrusion 3D Concrete Printing
249. Foulki Rida, Mesoudy Mouad, Cherkaoui Khalid (2025-10)
     Numerical and Theoretical Analysis of Pumping and Extrusion in 3D Concrete Printing
250. Pfleger Marc-Patrick, Radl Elisabeth, Sam Nina, Vill Markus (2025-10)
     3D Concrete Printing of Thin-Walled Load-Bearing Reinforced Structures
251. Couque Pierre, Carneau Paul, Corvez Dominique, Tanant Julien et al. (2025-10)
     3D Printed Concrete - Applications for the Industry:
     Latest Feedback from France
252. Pal Abhipsa, Wan-Wendner Lin (2025-10)
     3D Concrete Printing and Infill Patterns of Energy Efficient Structural Wall Elements
253. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
     Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
254. Das Jyotish, Pratama M., Nematollahi Behzad, Guadagnini Maurizio (2025-10)
     Durability Performance of 3D-Printed Ultra-High Strength Concrete Incorporating Corrosion Inhibitor
255. Drumond Pedro, Milagres Geysiane, Parassen Paloma, Santos Luana et al. (2025-10)
     Assessment of Printing Direction in Flexural Tests of 3D Printed Reinforced Concrete Beams
256. Gajjar Parth, Gajjar T., Tangirala Aniruddha, Shrestha Ajad (2025-10)
     Advancing 3D Printing in Construction:
     Rheological Behaviors of Cementitious Composites with Supplementary Materials
257. Kim Yoon-Chul, Han Tong-Seok (2025-10)
     Buildability Analysis in 3D Concrete Printing Using Computer Vision and Automated Annotation
258. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
     Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites
259. Altehaini Zakiah, Dayili Mohammed, Alrajab Meshari, Harbi Adel et al. (2025-10)
     Deploying 3D Concrete Printing for Large-Scale Building Construction in Saudi Arabia:
     A Case Study
260. Lange David, Shen Chenyue (2025-10)
     Toward Durable 3D Printed Structures
261. Apsari Auliagitta, Tambusay Asdam, Suprobo Priyo, Suryanto Benny (2025-10)
     Influence of Printing Speed and Nozzle Size on Buildability of 3D Printed Concrete Walls:
     A Nonlinear Finite Element Study
262. Raza Ali, Yuan Chengfang (2025-10)
     Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
263. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-10)
     Next-Generation Net-Zero Composite for Underwater 3D Printing Construction:
     Hybrid Machine Learning Optimized LC3 with Recycled Rubber
264. Giulivo Marco, Capozzi Vittorio, Menna Costantino (2025-10)
     Experimental and Analytical Assessment of the in-Plane Behaviour of 3D Printed Concrete Walls Subjected to Cyclic Loads
265. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
     Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
266. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
     Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
     Material Modification and Curing Process Innovation
267. Maierdan Yierfan, Armistead Samuel, Seshadri Akul, Carcassi Olga et al. (2025-10)
     Locust Bean Gum–Stabilized Kaolin-Rich Earthen Composites:
     From On-Land to Underwater 3D Printing
268. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
     Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
269. Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-10)
     3D Concrete Printing:
     Pioneering Innovations and Recent Development
270. Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
     The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
271. Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk, Seepim Sirakan et al. (2025-10)
     Investigation of Out-of-Plane Bending Behaviour of 3D-Printed Reinforced and Unreinforced Walls
272. Tanaka Shunsei, Yoshida Kohei, Yamamoto Yujin, Kinomura Koji (2025-10)
     Numerical Evaluation on Buildability of 3D Printing Mortar Based on Time-Dependent Material Model
273. Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
     Multi-Material 3D Concrete Printing:
     Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
274. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-10)
     Design Optimization and Assessment of Stay-in-Place 3D Printed Concrete Formwork for Slabs
275. Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
     Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
     Experimental Study and Finite Element Analysis
276. Ali Muhammad, Qian Hui, Umar Muhammad, Fenglin Liu et al. (2025-10)
     Rheological, Mechanical, and Self-Recovery Performance of 3D-Printed ECC Reinforced with Shape Memory Alloy Fibers
277. Boldini Alain, Giwa Ilerioluwa, Kamel Ehsan, Kazemian Ali (2025-10)
     Spatiotemporal Temperature Prediction in 3D-Printed Sulfur Concrete for Automated Construction on Earth and Beyond
278. Luo Rui, Sun Bin, Fei Xiangpeng, Du Hongjian (2025-10)
     Interlayer Strength Loss in 3D Printed Concrete Due to Time-Gap-Induced Macroporosity
279. Kim Tae, Oh Sangwoo, Lee Jinsuk, Choi Seongcheol et al. (2025-10)
     Experimental Data-Driven Framework for Quality Control of 3D-Printed Concrete Permanent Formworks
280. Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
     Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
     A Design Method for Printing-Friendly Structure
281. Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
     Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
     A Review
282. Ozturk Onur, Lunsford Caleb, Nair Sriramya (2025-10)
     Advancing Underwater Construction with 3D Printing:
     A Two-Stage Approach
283. Lyu Ping, Wang Kejin, Doyle Shelby, Laflamme Simon et al. (2025-10)
     Green 3D Printing Concrete Containing Biochar and Waste Wind Turbine Blade Powder
284. Han Seongho, Addai-NImoh Alfred, Gu Yucun, Khayat Kamal (2025-10)
     Enhanced Shape Stability of Flowable Mortar Through CO2 Injection for 3D Concrete Printing Application
285. Wei Jingjie, Khayat Kamal (2025-10)
     Effect of Chemical Additives on Performance of Low-Clinker 3D Printing Mortar
286. Santhanam Manu (2025-10)
     Multi-Scale Assessment of the Structural Performance of 3D Printed Concrete
287. Lange David, Shen Chuanyue (2025-10)
     Modeling the Fresh Properties of Cement-Based Materials for 3D Concrete Printing
288. Subramaniam Kolluru, Singh Prashant, Maganty Sohanth, Paritala Spandana (2025-10)
     Form Optimization Applications of 3D Concrete Printing:
     From Bridge to Protective Structures
289. Gu Yucun, Han Seongho, Khayat Kamal (2025-10)
     Effect of Absorption Kinetics of Superabsorbent Polymer on 3D Printing Characteristics
290. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
     Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
291. Rizzieri Giacomo, Lanteri Federico, Ferrara Liberato, Cremonesi Massimiliano (2025-10)
     ShapeGen3DCP:
     A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing
292. Castro-Chincho Ana, Ivorra-Martinez Juan, Perejón Antonio, Sánchez-Jiménez Pedro et al. (2025-10)
     3D-Printed Mineral Limestone Structures for Calcium Looping Thermochemical Energy Storage:
     Reactivity and Performance Across Cycles
293. Mahmood Ali, Nanos Nikos, Begg David, Dhakal Hom (2025-10)
     Recycled Waste Materials Utilised in 3D Concrete Printing for Construction Applications:
     A Scientometric Review
294. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-10)
     Adaptive Velocity Compensation for Optimal 3D Concrete Printing in Uncontrolled Environments
295. Seepim Sirakan, Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk et al. (2025-10)
     Effects of Printing Interval Time on the Structural Performance of 3D-Printed Beams Under Four-Point Bending Loads
296. Ye Htun Thet, Panuwatwanich Kriengsak, Tanapornraweekit Ganchai, Jongvisuttisun Passarin et al. (2025-10)
     Carbon Emission Assessment of 3D Printed Hybrid Modular Concrete Building:
     Work Breakdown Structure
297. Gonsalves Nicolas, Morgan Ashlei, Thiele Heidi, Olarra Andre et al. (2025-10)
     3D Printing of Sustainable Infrastructure Using Rapid-Set Clay Concrete with Biobased Additives
298. Reznik Petro, Volodymyrov Anton, Tenesesku Vladyslav, Firsov Pavlo (2025-10)
     Numerical Analysis of 3D-Printed Permanent Formwork in Multi-Story Building Construction
299. Miri Zahra, Baaj Hassan, Polak Maria (2025-10)
     Exploring Interfaces in 3D-Printed Concrete Through Cohesive Zone Modelling
300. Thajeel Marwah, Chalawi Ameen, Balázs György (2025-09)
     Printability and Strength of 3D-Printed Concrete:
     Role of Mix Design and Printing Parameters
301. Bu Dechao, Zhang Jiawei, Wu Gan, Xia Zixu et al. (2025-09)
     Impact Performance of 3D Printed ECC Inspired by Biological Bouligand Structure
302. Li Zhengrong, Xing Wenjing, Sun Jingting (2025-09)
     Heat Transfer Calculation and Correction for 3D Printed Walls Incorporating Surface Geometry Effects
303. Válek Josef, Romanová Dorota (2025-09)
     3D Concrete Printing Simulating Device in Comparison to Real Printing and Aggregate Substitutes
304. Liu Han, Sousa Israel, Laflamme Simon, Doyle Shelby et al. (2025-09)
     Embedment of 3D Printed Self-Sensing Composites for Smart Cementitious Components
305. Akter Usmi, Rezvi Syed, Ratul Md., Kishor Saad (2025-09)
     Optimization of Data-Driven Ensemble Models Using Firefly Algorithm for Enhanced 3D Printed Concrete Strength Prediction
306. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-09)
     From Qualitative Diagnosis to Adaptive Compensation for Filament Imperfections During On-Site Robotic 3D Printing
307. Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
     Recycled Components in 3D Concrete Printing Mixes:
     A Review
308. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
     Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
309. Philip Nivin, Jędrzejewska Agnieszka, Mathew Ashitta, Uthuppan Susan (2025-09)
     Steel Fiber Reinforcement for Improved Structural Performance and Durability of 3D Printed Mortar in Marine Environments
310. Sun Yan, Mudasir Maryam (2025-09)
     3D Printing Performance of Strain-Hardening Cementitious Composites with Different UHMWPE Fibers in Correlation with Rheology
311. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2025-09)
     Investigating the Impact of Material Rheology on Geometric Accuracy in 3D Concrete Printing Using Real-Time Monitoring
312. Liu Renlong, Tang Jiyu, Feng Hu, Cheng Zhangqi (2025-09)
     Study on the Instability of Early Age 3D Printing Cement-Based Structure:
     Considering the Influence of Interface
313. Yamakawa Soji, Vazquez-Santiago Kyshalee, Xia Yixuan, Ogura Hiroki et al. (2025-09)
     Concrete Spray 3D Printing Simulator for Nozzle Trajectory Planning
314. Xie Xiangyu, Liu Xuemei, Zhang Nan, Zhang Lihai et al. (2025-09)
     Capillary Extrusion Rheometry for Characterising Wall Slip Behaviour in 3D Printed Concrete
315. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
     Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
     Rheology, Strength, and Anisotropy
316. Safdar Gardezi Syed, Tanyildizi Harun, Haroglu Hasan, Coskun Ahmet (2025-09)
     Acid Attack Performance of 3D Printing Nano-ZnO Modified Geopolymer Mortar
317. Mahdy Deena, Sameh Hazem, Fekry Mayar (2025-09)
     Structural Stability of 3D-Printed Earthen Catenary Domes:
     Experimental and Analytical Insights
318. Rabul H., Prem Prabhat, Ravichandran Darssni, Rathan RT Arjun (2025-09)
     Development of Fly Ash and Limestone Calcined Clay-Based Mixtures for Concrete 3D Printing
319. Mansouri Abraham, Alsuwaidi Abdulla, Binali Alreem, Binshaqooi Essa et al. (2025-09)
     Conjugate Heat Transfer and U Value Analysis of 3D Concrete Printed Envelopes with Variable‐Thickness Air Cavities in Hot‐Arid Climates
320. Si Wen, Hopkins Ben, Khan Mehran, McNally Ciaran (2025-09)
     Towards Sustainable Mortar:
     Optimising Sika-Fiber Dosage in Ground Granulated Blast Furnace Slag and Silica Fume Blends for 3D Concrete Printing
321. Lee Chang-Hwan, Gwak Kwan-Woong (2025-09)
     Experimental Validation of a Cable Driven Parallel Robot for 3D Printing Building Construction
322. Anwar Muhammad, Zhu Xingyi, Zhang Yating, Wang Jiakang et al. (2025-09)
     Synergistic Effects of Microwave Curing Regimes on Early, Mid, and Long-Term Strengths and Microstructural Performance of Fly Ash-Slag Based 3D-Printed Geopolymers
323. Singh Amardeep, Yang Song, Wang Dianchao, Xiao Jianzhuang et al. (2025-09)
     Critical Threshold Fiber Content for Freeze-Thaw Resistance in 3D-Printed Concrete
324. Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
     Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
325. Maroszek Marcin, Rudziewicz Magdalena, Rusin-Żurek Karina, Hager Izabela et al. (2025-09)
     Recycled Materials and Lightweight Insulating Additions to Mixtures for 3D Concrete Printing
326. Chen Baixi, Yang Lei, Jiang Sheng (2025-09)
     Stochastic Analysis of 3D Concrete Printing Process with Curvature and Inclination by Explainable Data-Driven Modelling
327. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Chen Weihua (2025-09)
     Integrated Non-Destructive Assessment of 3D Printed UHPC Microstructure Using X-Ray Computed Tomography and Ultrasonic Waves
328. Matos Ana, Emiroğlu Mehmet, Milheiro-Oliveira Paula (2025-09)
     Predicting Stabilized Soil Mixture Proportions for 3D Printing:
     Preliminary Study Using the Design of Experiments Approach
329. Piechówka-Mielnik Magdalena, Bednarz Łukasz, Krupa Michał, Wojciechowska Gabriela et al. (2025-09)
     Sustainable Development in Building Engineering:
     Hempcrete in 3D Printing Technology
330. Yang Rijiao, Xu Chengji, You Xiufei, Li Xinze et al. (2025-09)
     Saddle Stitching-Enabled Interfacial Toughening in 3D Printed Concrete
331. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
     Layer Interface in 3D Printed Cement-Based Materials:
     Heterogeneous Phase Distribution and New Insights into Formation Mechanism
332. Xu Bin, Sun Zhaoyang, Sun Ming, Chen Binmeng (2025-09)
     Realizing Rheological Manipulation by Adjusting Initiator Concentrations for In-Situ Polymerization:
     Towards 3D Concrete Printing Applications
333. Wang Li, Fan Haichen, Wang Qiang, Bai Gang et al. (2025-09)
     Design Method and Force Transmission Mechanism of 3D Printed Concrete Truss Beams Reinforced with 3D Conical Reinforcement
334. Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
     Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites
335. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
     Advances in Sustainable 3D-Printed Geopolymer Concrete:
     Materials, Performance, and Environmental Impact in Next Generation Green Construction
336. Tarhan İsmail, Tarhan Yeşim (2025-09)
     Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
     Experimental Mix Design and Numerical Structural Assessment
337. Mawas Karam, Maboudi Mehdi, Gerke Markus (2025-09)
     A Review on Geometry and Surface Inspection in 3D Concrete Printing
338. Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
     Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
     A Review
339. Kua Harn, Shi A., Kajandran V., Lam T. et al. (2025-09)
     Toward Sustainable Construction 3D Printing:
     Limestone and Non-Calcined Recycled Marine Clay as Partial Cement Replacement
340. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
     Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
341. Liu Ruiqing, Du Hongjian (2025-09)
     Optimizing Thermal Insulation Through Geometric Design:
     Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
342. Alonso-Cañon Sara, Blanco-Fernandez Elena, Cuesta-Astorga Eva, Indacoechea-Vega Irune et al. (2025-09)
     Selection of the Best 3D Printing High-Performance Mortars Using Multi-Criteria Analysis
343. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
     Bauxite Residue-Based 3D Printing Mortar:
     Enhancing Performance and Sustainability Through the Paste Replacement Approach
344. Kim-Tackowiak Hajin, Carstensen Josephine (2025-09)
     Topology Optimization of 3D-Printed Material Architectures:
     Testing Toolpath Consideration in Design
345. Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
     Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
     A Finite Element Modeling Strategy
346. Sabouni Reem, Martini Samer (2025-09)
     Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties
347. Luo Surong, Jin Wenhao, Zhang Zhaorui, Zhang Kaijian (2025-09)
     Constitutive Relationship of 3D Printed Fiber Reinforced Recycled Sand Concrete Under Uniaxial Compression
348. Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
     Industrial Waste in 3D Printed Concrete:
     A Mechanistic Review on Rheological Control and Printability
349. Xing Wenjing, Li Zhengrong (2025-09)
     Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
     A Multiscale Computational Approach
350. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
     Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
     A Case Study in China
351. Leong Wai (2025-09)
     Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
352. Sikora Paweł (2025-09)
     Globally First 3D‐Printed Concrete Drinking Water Tank in Barczewko, Poland
353. Gencel Osman, Nodehi Mehrab, Subaşı Serkan, Ustaoğlu Abid et al. (2025-09)
     Properties of 3D Printed Concrete Containing Microencapsulated Phase Change Material
354. Jiang Youbau, Wen Jun, Gao Pengxiang, Liu Yan et al. (2025-09)
     Effect of Graphene Oxide on Physical and Mechanical Properties of 3D Printed Concrete
355. Arumugam Girirajan, Kusumo Camerlia May Li, Mari Tamil (2025-09)
     Impact of Bioinspired Infill Pattern on the Thermal and Energy Efficiency of 3D Concrete Printed Building Envelope
356. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
     Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
     Small- to Medium-Scale Wall Experiments
357. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
     Development of Sustainable 3D Printing Concrete Materials:
     Impact of Natural Minerals and Wastes at High Replacement Ratios
358. Du Guoqiang, Deng Xiaowei, Qian Ye (2025-09)
     Biomimetic 3D Printed Herringbone-Bouligand Cementitious Composites for Ultra-High Impact Performance
359. Mousavi Moein, Rangaraju Prasad (2025-09)
     Freeze-Thaw Durability of 3D Printed Concrete:
     A Comprehensive Review of Mechanisms, Materials, and Testing Strategies
360. Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
     Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
361. Vollmert Jasper, Peralta Patricia, Alatassi Adel, Chmelnizkij Alexander et al. (2025-09)
     Towards Structural Health Monitoring of Clay-Printed Structures
362. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
     Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
363. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2025-09)
     Influence of Rheology Modifying Admixtures on the Buildability of 3D Printing Cement-Based Mortars
364. Chortis Alexandros, Gkountas Charalampos, Melidis Lazaros, Katakalos Konstantinos (2025-09)
     Seismic Performance Evaluation of 3D-Printed Concrete Walls Through Numerical Methods
365. Sari Mustika, Berawi Mohammed, Taswin William, Saroji Gunawan et al. (2025-09)
     Work Breakdown Structure and Construction Process Framework for a Hybrid 3D-Printed Modular Building
366. Kubjana Lucy, Aigbavboa Clinton, Adekunle Peter (2025-09)
     Advancing Sustainable 3D-Printed Concrete:
     A Bibliometric Study on Financing Housing Options
367. Marco Giancarlo, Cheung Lok (2025-09)
     Multimodal Large Language Models for Adaptive 3D Concrete Printing:
     Real-Time Control of Materials and Settings According to Performance Requirements and Environmental Conditions
368. Marco Giancarlo, Lombardi Davide, Dounas Theodoros, Agkathidis Asterios (2025-09)
     A Theoretical Framework for the Standardisation and Industrialisation of 3D Concrete Printing Through Decentralised Science
369. Safanelli Nicollas, Schackow Adilson, Effting Carmeane, Matos Paulo (2025-09)
     The Effect of Crystalline Nanocellulose on the Rheology, Hydration of Cement Pastes, and Buildability of 3D-Printed Concrete
370. Bhagat Rajesh, Pande Prashant, Madurwar Kamlesh, Raut Jayant et al. (2025-09)
     Life Cycle Assessment of 3D-Printed Building Materials Towards Sustainability-Driven Optimization and Environmental Impact Analysis Using Computational Intelligence Techniques
371. Lian Hongqian, Ding Tao (2025-09)
     Deformation of Inclined Concrete 3D Printing:
     A Computational Fluid Dynamics Analysis
372. Keller Petr, Mendřický Radomír (2025-09)
     Analysis of Object Deformations Printed by Additive Manufacturing from Concrete Mixtures over Time
373. Syed Sajid, Abid Khasim, Khan Majid (2025-09)
     An Interpretable Machine Learning Approach for Predicting Reinforcement Bond Performance in 3D Concrete Printing
374. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
     Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
     A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
375. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
     Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
376. Maurya Shubham, Kumar Vijay, Panda Biranchi, Borsaikia Arun et al. (2025-09)
     Inline Polymer Cable Reinforcement in 3D Concrete Printing with a Special Nozzle
377. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2025-09)
     Behavior of 3D Printed Concrete Walls Exposed to High Temperatures
378. Mararo Ian, Babafemi Adewumi, Aigbavboa Clinton (2025-09)
     Towards Understanding the Perceptions of 3D Construction Printing in Kenya
379. Rahman S., Khair Sanjida, Shaikh Faiz, Sarker Prabir (2025-09)
     Decarbonized 3D Printed Concrete Incorporating Lithium Slag and PVA Fiber:
     Buildability, Mechanical, and Microstructural Insights
380. Barbhuiya Salim, Das Bibhuti, Adak Dibyendu (2025-09)
     Key Variables Influencing the Performance of 3D Printed Concrete:
     A Comprehensive Analysis
381. Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
     Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
     Current Status and Future Prospects
382. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
     A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
383. Alonso-Cañon Sara, Alonso-Estebanez Alejandro, Yoris-Nobile Adrian, Brunčič Ana et al. (2025-08)
     Rheological Parameter Ranges for 3D Printing Sustainable Mortars Using a New Low-Cost Rotational Rheometer
384. Liu Tong, Du Song, Teng Fei, Weng Yiwei (2025-08)
     Energy Consumption Modeling for a Robot Arm in 3D Concrete Printing
385. Yarlagadda Tejeswar, Zhang Zixin, Jiang Liming, Usmani Asif (2025-08)
     A Conceptual Model for Building Artistic and Geometrically Complex Building Envelopes Using Concrete 3D Printing
386. Quah Tan, Liu Zhixin, Tay Yi, Li Mingyang et al. (2025-08)
     In-Process Filament Repair in 3D Concrete Printing with Instance Segmentation
387. Liao Minmao, Gerong Wangdui, Wang Pengfei, Chen Zhaohui (2025-08)
     Determination of Elastic Engineering Constants in an Orthotropic Constitutive Model for Hardened 3D-Printed Concrete
388. Lyu Libo, Li Weihong, Deng Yongjie, Yu Qiuchun et al. (2025-08)
     Engineering Properties of Magnesium Phosphate Cement Lunar Soil Concrete Under Vacuum Conditions and Its 3D Printing Application for Lunar Dome Model
389. Ozturk Onur, Lunsford Caleb, Strait James, Nair Sriramya (2025-08)
     Breaking Barriers in Underwater Construction:
     A Two-Stage 3D Printing System with On-Demand Material Adaptation
390. Mak Bunleang, Kim Tae, Dong Won-Jun, Shim Chang (2025-08)
     Crack Width Investigation of Reinforced Concrete Beam with 3D Concrete Printed Formwork Using Modified Parameters
391. Baritakis Mario, Traine Phillip, Granzow Jan, Döbert Christine (2025-08)
     3D-Printed Clay Formwork for Topology:
     Optimized Concrete Elements
392. Zhang Yifan, Aslani Farhad (2025-08)
     Mechanical and Ultrasonic Pulse Velocity Performance of 3D Printed Rubberised Cementitious Composites Reinforced with PVA Fibers
393. Yang Shuai, Li Fei, Lu Ya, Xu Xiaoming et al. (2025-08)
     Study of the Printing Characteristics of a 3D Printing Solution for the Purpose of Process Optimization
394. Lin Manfang, Ding Yao, Yu Fan, Li Lingzhi et al. (2025-08)
     Synergistic Strengthening of 3D‑printed ECC Beams Through Steel-Wire Mesh and Interfaces Treatments
395. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
     Revolutionizing Architecture:
     3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
396. Lin Yini, Yan Jiachuan, Sun Ming, Tang Boyang et al. (2025-08)
     Effects of Waste Glass Powder on Printability, Hydration and Microstructure of 3D Printing Concrete
397. Zhou Yuecheng, Xiao Sai, Li Haonian, Wang Chong et al. (2025-08)
     Study on the Rheological Properties and Printability of Multi-Scale Material Modified Mortar for 3D Printing
398. Banihashemi Saeed, Akbarnezhad Ali, Sheikhkhoshkar Moslem, Haouzi Hind et al. (2025-08)
     3D Printing in Construction:
     Sustainable Technology for Building Industry
399. Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
     Influence of Process Parameters on 3D Concrete Printing:
     A Step Towards Standardized Approaches
400. Wang Cheinfei, Lian Junyin, Fang Yunhui, Fan Guangming et al. (2025-08)
     Rheological Optimization of 3D-Printed Cementitious Materials Using Response Surface Methodology
401. Berman Ofer, Zavadsky Andrey, Drimer Nitai, Shashar Nadav et al. (2025-08)
     A Pure Ceramic 3D Printed Artificial Reef:
     Stability and Response
402. Yu Qian, Zhang Yamei, Pan Jinlong (2025-08)
     Multi-Scale Orthotropic Damage Constitutive Model for 3D Printed Concrete Informed by Pore Structure
403. Wang Chaofan, Chen Bing, Wang Yong, Vo Thanh et al. (2025-08)
     Influencing Mechanism of Magnesium-to-Phosphate Ratio on the Rheology and Microstructure Development of 3D-Printed Magnesium Phosphate Cement at Early Hydration
404. Zhang Nan, Sanjayan Jay (2025-08)
     Concrete 3D Printing and Digital Fabrication Technologies for Bridge Construction
405. Bradford Katy, Gentry Russell, Alon Lola, Kurtis Kimberly (2025-08)
     Construction 3D Printing Material Selection:
     Minimizing Cost and Carbon Footprint of Residential Wall Assemblies
406. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
     Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
407. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
     Transformative Low-Carbon 3D-Printed Infrastructure:
     Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
408. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
     Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
     Effect of Cold Joint, Axial Load and Load Type
409. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2025-08)
     Experimental Study on Buildability of 3D-Printed Cement-Based Structures Using Aluminium Sulphate
410. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
     Anisotropy of Mechanical Properties of 3D-Printed Materials:
     Influence of Application Time of Subsequent Layers
411. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
     Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
412. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
     Innovative Reinforcement Techniques for 3D-Printed Concrete:
     The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
413. Abid Khasim, Syed Sajid, Khan Majid (2025-08)
     Explainable Machine Learning-Based Model for Predicting Interlayer Bond Strength in 3D Printed Concrete
414. Yao Weijing, Gao Yangyunzhi, Huang Xin, Du Hongjian (2025-08)
     Influence of Printing Speed and Extrusion Speed on the Performance and Pore Structures of 3D Printed Mortar
415. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
     Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
416. Dietrich Sebastian, Schneider Philip, Richter Christiane, Najian Asl Reza et al. (2025-08)
     Multi-Fidelity Structural Design for 3D Concrete Printing with Selective Paste Intrusion
417. Kumar Rohan, Das Nabodyuti, Nanthagopalan Prakash (2025-08)
     Novel Interlocking Nozzle Geometry for Enhanced Interlayer Strengthening in 3D Concrete Printing
418. Boddepalli Uday, Kandagaddala Revanth, Nanthagopalan Prakash (2025-08)
     Evaluation of Alkali-Activated Limestone Calcined Clay Mortars for 3D Concrete Printing Applications
419. Sapata Alise, Pluminss Ernests, Šlosbergs Pēteris, Šinka Māris (2025-08)
     Utilizing Construction Demolition Waste Aggregates in Cement- Free Concrete for 3D Printing
420. Lu Qianyang, Mei Song, Ateah Ali, Alsubeai Ali et al. (2025-08)
     Investigating the Strength Performance of 3D Printed Fiber-Reinforced Concrete Using Applicable Predictive Models
421. Aydin Tolga, Sandalci Ilgin, Aydin Eylül, Kara Burhan et al. (2025-08)
     Investigation of Bacterial Cells and Clays as Rheology Modifiers in 3D Concrete Printing
422. Xiao Yinan, Vandenberg Aileen, Lowke Dirk, Mai (née Dressler) Inka et al. (2025-08)
     Automated Robotic Assembly Planning of Space Trusses for Injection 3D Concrete Printing
423. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
     Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
424. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
     Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
425. Limlunjakorn Torpong (2025-08)
     The Designing of 3D-Printed Modular Artificial Reefs Through Design Thinking Framework:
     A Case Study in Koh Khai, Chumphon Province, Thailand
426. Geng Shao-bo, Zhang Chen, Zhang Hui, Hai Lu et al. (2025-08)
     Upcycling Coal Gangue Coarse Aggregates into 3D Printed Concrete:
     Multi-Scale Mechanisms of Fracture Behaviour
427. Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
     Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
     Design, Mechanical Properties and Microstructural Analysis
428. Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
     Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures
429. Kantaros Antreas, Ganetsos Theodore, Kanetaki Zoe, Stergiou Constantinos et al. (2025-08)
     Design and Fabrication of Customizable Urban Furniture Through 3D Printing Processes
430. Syed Mohammad, Sharma Sumedh, Koliou Maria, Sideris Petros (2025-08)
     Economic Analysis of 3D-Printed Hempcrete Buildings
431. Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
     Interface Bonding in 3D-Printed Concrete:
     Experimental Evaluation and Numerical Modeling
432. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
     From Waste to Strength:
     Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
433. Li Nan, Deng Yongjie, Li Weihong, Li Lingyu et al. (2025-08)
     Performance of Active-Magnesia-Based Magnesium Phosphate Cement and Application of Rapid-Solidification 3D Printing Technology
434. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
     The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
     Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
435. Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
     Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete
436. Eid Zainab, Almurbati Nehal (2025-07)
     Applications of 3D Printing Buildings Using Construction and Demolition Waste:
     Techniques and Considerations
437. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha, Rihani Nadir (2025-07)
     Clay and Alginate-Based Mixtures 3D Printing:
     A Numerical Procedure for Shape Stability and Buildability Assessment
438. Raza Muhammad, Besklubova Svetlana, Kravchenko Ekaterina, Zhong Ray (2025-07)
     Economic Viability of 3D Concrete Printing:
     A Comparative Study with Traditional Construction Method
439. Peralta Patricia, Al-Zuriqat Thamer, Noufal Mahmoud, Smarsly Kay (2025-07)
     Automated Defect Detection in Clay Printing
440. Patel Abhishek, Raphael Benny (2025-07)
     Reducing Carbon Emissions in 3D Printed RCC Slabs
441. Iqbal Imtiaz, Besklubova Svetlana, Kasim Tala (2025-07)
     Assessment Framework for 3D Concrete Printing Technology in Alignment with Construction 5.0 Criteria
442. Kravchenko Ekaterina, Raza Muhammad, Besklubova Svetlana, Lazorenko Georgy (2025-07)
     Transforming Construction Waste into Resources for 3D Printed Concrete
443. Vico Lujano Raúl, Pérez Villarejo Luis, Novais Rui, Hidalgo-Torrano Pilar et al. (2025-07)
     Optimized Mortar Formulations for 3D Printing:
     A Rheological Study of Cementitious Pastes Incorporating Potassium-Rich Biomass Fly Ash Wastes
444. Abdelaziz Mohamed, Vukorep Ilija, Mahdy Deena (2025-07)
     Exploring Extreme 3D Printed Clay Overhangs with Integrated Active Hot Air Drying System on Robotic Arm
445. Santhosh S., Raphael Benny, Santhanam Manu (2025-07)
     Exploration of Sustainable Beam Design Using Voronoi Patterns in Concrete 3D Printing
446. Chen Baixi, Qian Xiaoping (2025-07)
     Explainable Data-Driven Analysis of Uncertainty Propagation in 3D Concrete Printing via Adaptive Polynomial Chaos Expansion
447. Mesoudy Mouad, Rida Foulki, Driss Amegouz (2025-07)
     Addressing Geometrical and Dimensional Accuracy Challenges in 3D Concrete Printing
448. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
     Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
449. Singh Amardeep, Anand Kamal, Liu Qiong, Tam Vivian et al. (2025-07)
     Enhancing Interlayer Bonding in 3D Printed Concrete Using Bacteria-Based Biomineralization
450. Wang Jiakang, Anwar Muhammad, Zhu Xingyi, Zhang Yating et al. (2025-07)
     Robust Optimization of Formulation Ratios for the Mechanical, Microstructural and Printing Performance of Cost-Effective 3D Printing Geopolymer
451. Panchal Priyanka, Choi Myoungsung (2025-07)
     A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete
452. Yerikania Utami, Du Hongjian, Poh Leong (2025-07)
     A Comprehensive Experimental Investigation of Anisotropy Behavior on Highly Carbon-Minimized 3D Printed Concrete
453. Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
     A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete
454. Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
     Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
     Unleashing the Potential of Additive Manufacturing for Protective Structures
455. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-07)
     Ultrasonic Pulse Velocity for Real-Time Filament Quality Monitoring in 3D Concrete Printing Construction
456. Ishikawa Shinichi, Yamada Ryo, Tasaki Ryosuke (2025-07)
     High-Sensitivity Interlayer Force Measurement and Multi-Layer Smoothing Control for 3D Printing on Uneven Surfaces
457. Ingle Vaibhav, Prem Prabhat (2025-07)
     Acoustic Emission Examination of 3D Printed Ultra-High Performance Concrete with and Without Coarse Aggregate Under Fresh and Hardened States
458. Sahebi Soleyman, Aslani Farhad (2025-07)
     Mechanical Strength and Heat Tolerance of 3D Printed Rubberised Concrete at Elevated Temperatures
459. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
     Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
     Rheological Properties and Practical Applications
460. Ding Shengxuan, Li Jiren, Wang Mingqiang (2025-07)
     Study on Mechanical Properties of Composite Basalt Fiber 3D-Printed Concrete Based on 3D Meso-Structure
461. Pemas Sotirios, Baliakas Dimitrios, Pechlivani Eleftheria, Stefanidou Maria (2025-07)
     Mechanical Properties of Bio-Printed Mortars with Bio-Additives for Green and Sustainable Construction
462. Joshi Arpan, Gaspar Florindo, Archbold Paul, Silvestre José (2025-07)
     Study on the Composition of Mortars Based on Forest Biomass Fly Ash for Sustainable 3D Printing
463. Jin Yuan, Jiang Chengzhi, Gan Xingyu, Sun Zhaoyang et al. (2025-07)
     Enhancing the Printability of 3D Printed White Cementitious Materials with Accelerators:
     Evolution of Early-Age Hydration and Rheology
464. Goel Devansh, Kore Sudarshan (2025-07)
     Mapping the Bibliometric Progression of 3D Concrete Printing:
     A Concise Review
465. Lu Chenyu, Sun Dongpu, Shen Qiang, Zhang Zhigang et al. (2025-07)
     Buildability of 3D Printing Engineered Cementitious Composites (ECC):
     A Comprehensive Assessment Framework Under Laboratory Conditions
466. Dong Liang, Wu Chengqing, Liu Zhongxian, Wu Pengtao et al. (2025-07)
     Chloride Transport Anisotropy and Interfacial Degradation in 3D-Printed Ultra-High-Performance Concrete:
     Multi-Scale Evaluation and Engineering Implications
467. Cui Weijiu, Guo Ruyi, Liu Wenliang, Da Wan et al. (2025-07)
     Quality Assessment of 3D‐Printed Concrete Through Quantitative Visual Inspection
468. Yang Rijiao, Xu Chengji, Fang Sen, Li Xinze et al. (2025-07)
     Mechanistic Insights into Microstructural Changes Caused by Stapling in Extrusion-Based 3D Printed Concrete (3DPC)
469. Balina Karina, Gailitis Rihards, Šinka Māris, Argalis Pauls et al. (2025-07)
     Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives
470. Shiotani Tomoki, Asaue Hisafumi, Ogura Hiroki, Okude Nobuhiro et al. (2025-07)
     Evaluation of Permanent 3D Printed Formwork of a Bridge Pier Using Non-Destructive Testing Methods
471. Ding Tao, Dong Haining, Sikora Paweł, Lin Guan (2025-07)
     3D Printed Concrete Reinforced with Flexible Fiber Reinforced Polymer Strips or Grids:
     Concept and Bond Tests
472. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
     Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
473. Liang Jingwen, Zeng Zuo, Wang Penglin, Wang Zhongxu et al. (2025-07)
     Emergency Response Mobile 3D Printing System:
     A Case Study in Rapid Manufacturing of Polyurethane Foam Bridges
474. Dragomir Mihai, Salem Tareq, Dragomir Diana, Hedjazi Lofti et al. (2025-07)
     Design Validation in Construction Project Management Using 3D Printing
475. Chhabra Gulshan, Gupta Anjali, Bali Rajan, Tanwar Lovesh (2025-07)
     Advancing Sustainability in Construction:
     A Comprehensive Study on 3D-Printed Concrete Technologies
476. Zafar Muhammad, Javadnejad Farid, Hojati Maryam (2025-07)
     Optimizing Rheological Properties of 3D Printed Cementitious Materials via Ensemble Machine Learning
477. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
     Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
478. Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
     Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate
479. Kellnerová Vendula, David Tomáš, Reiterman Pavel (2025-07)
     Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar
480. Khare Karan, Khan Subim, Lal Dhirajkumar, Sonawane Pavankumar et al. (2025-07)
     Design and Development of a Nozzle Assembly for 3D Concrete Printing Applications
481. Rojas Jorge, Hasanzadeh Sognad (2025-07)
     Human Factor in 3D Concrete Printing for Construction
482. Pessoa Ana Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2025-07)
     Heat Transfer in a 3D-Printed Multilayer Wall System:
     An Experimental and Numerical Analysis
483. Mostert Jean-Pierre, Kruger Jacques (2025-07)
     Reducing Anisotropic Behaviour of 3D Printed Concrete Through Interlocked Filaments
484. Bradshaw James, Si Wen, Khan Mehran, McNally Ciaran (2025-07)
     Emerging Insights into the Durability of 3D-Printed Concrete:
     Recent Advances in Mix Design Parameters and Testing
485. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
     Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
486. Raza Muhammad, Kravchenko Ekaterina, Besklubova Svetlana, Lazorenko Georgy et al. (2025-07)
     3D Printing of Recycled Materials for Sustainable Construction:
     A Comprehensive Economic and Life Cycle Assessment
487. Kachalov A., Sánchez P., Mollah Md., Ezquerro J. et al. (2025-07)
     Numerical Analysis of Coaxially 3D Printed Lunar Habitats:
     Integrating Regolith and PCM for Passive Temperature Control
488. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
     A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
489. Šána Vladimír, Litoš Jiří (2025-07)
     Load-Bearing Capacity of the 3D Printed Concrete Structure Based on a Static Assessment and Load Test in Scale 1:1
490. Liu Qiang, Zhang Xinwei, Jiang Quan, Xia Yong et al. (2025-07)
     Effects of Nano-Al2O3, Nano-MgO and Nano-Fe2O3 on the Properties of Cement-Based 3D Printing:
     A Comparative Study
491. Cao Yifang, Shen Luming, Mukherjee Abhijit, Abbas Ali et al. (2025-07)
     Improvement of the Interlayer Bonding Strength in a 3D-Printed Mortar with Biocement Sprayed into Interlayer Surfaces
492. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
     Recent Advances in CDW-Based Geopolymers:
     A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
493. Dong Wei, Zhang Changmin, Wang Junfeng, Zhang Xinjie et al. (2025-07)
     Optimal Design of Mix Proportions for 3D Printed Concrete with Ferrochrome Slag and Aeolian Sand
494. Shi Ye, You Ge, Wu Pengtao, Liu Zhongxian et al. (2025-07)
     Effect of Water Film and Paste Film Thicknesses on Printability of 3D Printed Low Cement UHPC
495. Bajwa Asad, Flemmer Claire, Samarasinghe Don, Bao Ding et al. (2025-07)
     Sustainability of 3D Printing Technology:
     A Review on Research Trends and Developments
496. Liu Nana, Wang Jie (2025-07)
     Experimental Study on the Effect of Water-Binder Ratio on 3D Printing Form of Concrete Mortar
497. Ali Syed, Haq Mohd, Khan Rizwan, Hashmi Ahmad (2025-07)
     A Comprehensive Review on 3D Printing of Concrete:
     Materials, Methods and Mechanical Properties
498. Yang Jie, Xu Ke, He Haijie (2025-07)
     Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete
499. Popli Siddharth, Valikhah Fatemeh, Zandi Lak Erfan, Das Sreekanta (2025-07)
     Mechanical and Durability Performance of 3D-Printed Concrete with Coarse Aggregates and Cold Joints
500. Du Shizhao, Kang Chunxia, Du Xiuli (2025-06)
     Fatigue Performance of 3D Printed Reusable Concrete Slabs for Temporary Pavements
501. Zuo Zibo, Huang Yulin, Corte Wouter (2025-06)
     Real-Time Monitoring of Printed Concrete Weight During 3D Concrete Printing to Inversely Assess Process Stability:
     Indicators and Experiments
502. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
     Multiphysics Modelling of 3D Concrete Printing:
     From Material Model to Process Simulation and Optimisation
503. Nandurkar Bhupesh, Raut Jayant, Hinge Pawan, Bahoria Boskey et al. (2025-06)
     Multi-Scale Deep Learning Framework for Three Dimensional Printed Self-Sensing Cementitious Composites with Hybrid Nano-Carbon Fillers
504. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
     Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
     Material, Geometry, and Loading Perspectives
505. Guan Jingyuan, Wang Li, Bai Gang, Ma Guowei (2025-06)
     Enhancing 3D Printed Formwork Columns via FRP Hoop Shear Connection Reinforcement
506. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Alhassan Mohammad et al. (2025-06)
     The Flexural Behavior of Engineered Cementitious Composites (ECC) One-Way 3D Printed Slabs Made of Solid and Hollow Sections
507. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
     Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process
508. Alkhawaldeh Ayah, Alhassan Mohammad, Sawalha Ansam, Betoush Nour et al. (2025-06)
     Integration of 3D Printing and Machine Learning in Sustainable Construction:
     Feasibility and Challenges
509. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
     Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
     Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
510. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
     Flexural and Tensile Strength:
     Mechanical Properties of 3D Printed Concrete
511. Liu Shun, Yang Xiaobin, Wu Jianing (2025-06)
     Damage Evolution Analysis of Cement-Based 3D Printing Similar Materials Under Different Cyclic Loading-Unloading Conditions
512. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
     Compressive Strength and Modulus of Elasticity:
     Mechanical Properties of 3D Printed Concrete
513. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
     Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
     Mechanical Properties of 3D Printed Concrete
514. Gasmi Abrar, Guessasma Mohamed, Davidovits Ralph, Pélegris Christine (2025-06)
     Unveiling Additive Effects in 3D Printed Geopolymer Composites:
     A Multi-Scale Analysis Coupling Rheological Insights and CFD-Optimized Deposition
515. Mishra Sanjeet, Upadhyay Bikash, Das Bibhuti (2025-06)
     3D Printing Aspects of Fly Ash and GGBS Admixed Binary and Ternary Blended Cementitious Mortar
516. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
     Approach and Main Results:
     Mechanical Properties of 3D Printed Concrete
517. Huang Shuyi, Anton Ana-Maria, Dillenburger Benjamin, Xu Weiguo (2025-06)
     Lamella-Inspired 3D Concrete Printed Column-Slab System:
     Balancing Act for Productivity and Sustainability
518. Sakhare Vishakha, Khairnar Neha, Dahatonde Ulka, Mashalkar Shilpa (2025-06)
     Review on Sustainability in 3D Concrete Printing:
     Focus on Waste Utilization and Life Cycle Assessment
519. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
     Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
520. Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2025-06)
     Winding Fiber Thread for 3D Concrete Robotic Printing
521. Saad E., Correa David (2025-06)
     Thermal Performance Improvement of Brick Design via 3D Printing
522. Marco Giancarlo, Asta J. (2025-06)
     Neobrutalism:
     The Digital and Cultural Micro-Landscape of 3D-Printed Concrete
523. Haar Bjorn, Kruger Jacques, Zijl Gideon (2025-06)
     3D Printed Concrete Pinned Beam-Column Connection Development
524. Hanifa Mohamad, Mendonça Paulo, Figueiredo Bruno, Mahdy Deena (2025-06)
     Experimental Study on the Thermal Performance of 3D-Printed Earthen Wall Segment with Optimized Infill Pattern
525. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
     Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
526. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Awawdeh Najemaldeen et al. (2025-06)
     Mitigation of Energy Crisis Worldwide Using 3D-Printed Concrete with Phase Change Materials
527. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
     Advancing the Field of 3D Concrete Printing by Exploring the Use of Eco-Friendly Mortars
528. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
     Significance of Nozzle Parameters for 3D Printing of Concrete
529. Najm Omar, Alhassan Mohammad (2025-06)
     Implementation of Brucite in Alkali-Activated Materials Intended for 3D Printed Structures:
     A Fractional Factorial Design Approach
530. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
     Enhancing 3D Printed Concrete Through Waste Fly Ash:
     A Comprehensive Approach to Sustainable and Efficient Mix Design
531. Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
     3D Printing of Conventional and Geopolymer Concretes:
     Advancements, Challenges, Future Directions, and Cost Analysis
532. Wijethunge Anjalee, Samarasinghe Don, Le An, Gajanayake Akvan et al. (2025-06)
     A Systematic Review on Sustainable 3D Concrete Printing:
     Opportunities and Challenges
533. Sagyntay Mukhagali, Storch Florian, Mustafa Azamat, Plaschnick Paul et al. (2025-06)
     Automated Production of 3D Printed Сoncrete Structures with Integrated Reinforcement Mesh Based on Standard Reinforcement Bars
534. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-06)
     Exploring Policy Influences on the Adoption of 3D Concrete Printing Technology:
     A Hypothetical Model
535. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
     A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
536. Oseji Samuel, Chukwuemeka Prince, Imoni Okes (2025-06)
     Artificial Intelligence in 3D Printed Concrete:
     Sustainability Assessment and Implementation Challenges
537. Ma Jiayue, Samarasinghe Don, Rotimi James, Zou Kelvin (2025-06)
     A Review of Supply Chain Dynamics of 3D Concrete Printing Construction Practice
538. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
     Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
539. Wang Xiaoqi, Zuo Tianyi, Xu Yanling, Liu Xing et al. (2025-06)
     Reinforcement Learning-Based Continuous Path Planning and Automated Concrete 3D Printing of Complex Hollow Components
540. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2025-06)
     Concrete Printing Through Lace Pressing:
     Head, Shoulders, Knees and Toes
541. Els Heinrich, Zijl Gideon, Villiers Wibke (2025-06)
     A Review of Shrinkage and Restrained Shrinkage Cracking in 3D Concrete Printing
542. Ding Shengxuan, Li Jiren, Liu Yiming (2025-06)
     Study on Mechanical Properties and Environmental Benefits of 3D Printed Lean Magnesium Ore Concrete Filled Columns Based on Three-Dimensional Meso-Structure
543. Ye Chengjie, Xu Jie, Lacidogna Giuseppe (2025-06)
     Fracture Behavior of 3D Printed Geopolymer Concrete Containing Waste Ceramic
544. Sun Hou-Qi, Zeng Jun-Jie, Zhuge Yan, Liu Yue (2025-06)
     3D Printed Functionally Graded Concrete Plates:
     Concept and Bending Tests
545. Shi Anqi, Lee Kah, Bo Sun, Koh Weng et al. (2025-06)
     Dimensional Effects on Shear Behaviour of 3D-Printed Concrete Shear Keys
546. Placzek Gerrit, Dahlberg Maike, Thormählen Jan, Schwerdtner Patrick (2025-06)
     How Productive Is 3D Concrete Printing?:
     A Systematic Review
547. Mansour Ali, Abou Khalil Amine, Khoury Hiam (2025-06)
     Toward Spatial and Cognitive Human-Robot Interaction:
     A Game-Based Simulation for Concrete 3D Printing in Construction
548. Hermida José, Saavedra Ruth, Hidalgo-Astudillo Samantha, Tošić Nikola et al. (2025-06)
     Influence of Fine Recycled Aggregates on the Properties of 3D Printing Concrete
549. Jendele Libor, Rymeš Jiří, Červenka Jan, Herzfeldt Michaela (2025-06)
     Time Dependent Modelling of Concrete for the Simulation of 3D Printing
550. Rajeev Pathmanathan, Nissanka Nilusha, Sanjayan Jay (2025-06)
     Experimental Study on Time-Dependent Pumping Behaviour of 3D Concrete Printing
551. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-06)
     Assessment of Post-Tension Capacity in Novel 3D-Printed Topology:
     Optimized Formwork via Load Transfer Testing
552. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
     Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
553. Gomez Jaramillo Laura, Luković Mladena, Šavija Branko, Zhou Wen (2025-06)
     Recycled Sand for 3D-Printed Strain Hardening Cementitious Composite:
     A Review of Recent Developments
554. Ewerz Johannes, Pfleger Marc-Patrick, Radl Elisabeth, Huber Patrick (2025-06)
     Concrete 3D Printing and Reinforcement:
     Determination of Bond Strength Through Pull-Out Tests
555. Galeote Eduardo, Claramunt Josep, Hermida José, Fuente Albert (2025-06)
     Influence of Fibers and Iron Dust on the Electrical Conductivity of 3D-Printed Concrete Mixes
556. Zuo Zibo, Huang Yulin, Tao Yaxin, Yong Yuan et al. (2025-06)
     Analysis of Factors Influencing the Maximum Continuous Printing Height of 3D Printed Concrete
557. Rajeev Pathmanathan, Kopitha Kirushnapillai, Sanjayan Jay (2025-06)
     Carbonated Water and MgO for Improved Performance of 3D Concrete Printing.
558. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
     Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
559. Divya M., Riza S., Shariff Najeeb (2025-06)
     Characterization of Cold Joint Formation in Digitally Printed Mortar During the Dormant Phase:
     A Time-Dependent Study
560. Garcés Gonzalo, García-Alvarado Rodrigo, Bunster Victor, Muñoz-Sanguinetti Claudia (2025-06)
     Additive Construction 4.0:
     A Systematic Review of 3D Concrete Printing for Construction 4.0
561. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
     Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
562. Girskas Giedrius, Kligys Modestas (2025-06)
     3D Concrete Printing Review:
     Equipment, Materials, Mix Design, and Properties
563. Karamara Merve, Bogdanski Moritz-Ole, Zöller Raphael, Albrecht Sophie et al. (2025-06)
     Increasing Efficiency and Sustainability:
     A Comparative Analysis of Concrete 3D Printing and Traditional Methods Based on Case Studies
564. Lamb Bannon, Sabih Gauhar (2025-06)
     Advancements in 3D Concrete Printing Materials
565. Jalil Siti Nur Natasha Abdul, Rizal Alias Ahmad, Alias Aizat (2025-06)
     Challenges and Strategies in Implementing 3D Concrete Printing (3DCP) Technology in Malaysia:
     Materials and Design Codes
566. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2025-06)
     Enhanced Environmental Sustainability of 3D-Printed Concrete Mixtures Based on Calcium Sulfoaluminate (CSA) and Blast Furnace Cement (CEM III/B)
567. Musathik A., Ashfak M., Arif M., Samaraweera B. et al. (2025-06)
     Towards Smart Construction:
     Development of an Automated Small Scale 3D Concrete Printer
568. Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
     Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
     A 3D Printed On-Site Load-Bearing Structure
569. Li Long, Ji Weiyi, Xiao Jianzhuang, Xiao Jie et al. (2025-06)
     Strategy for Improving Buildability of 3D Printing Concrete Using CO2 Mixing and Chemical Admixtures
570. Mostert Jean-Pierre, Kruger Jacques (2025-06)
     Improving Shear and Flexural Performance of Macroscale 3D Printed Concrete Beams Through Filament Interlocking
571. Yao Jiaxu, Luo Jie, Qiu Minghong, Nagai Kohei (2025-06)
     Mesoscale Modeling of Anisotropic Compressive Behavior and Pull-Out Performance of 3D Printed Concrete with Steel Bars Using 3D RBSM
572. Duan Yuhang, Wang Chuan, Yin Binbin, Liew Kim (2025-06)
     Modeling Interfacial Failure in 3D-Printed Concrete via Peridynamics
573. Alizamir Meysam, Kim Sungwon, Ikram Rana, Ahmed Kaywan et al. (2025-06)
     A Reliable Hybrid Extreme Learning Machine-Metaheuristic Framework for Enhanced Strength Prediction of 3D-Printed Fiber-Reinforced Concrete
574. Si Wen, Khan Mehran, McNally Ciaran (2025-06)
     A Comprehensive Review of Rheological Dynamics and Process Parameters in 3D Concrete Printing
575. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
     Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
576. Mahdy Deena, Dara Seni, Abdelrahim Marwa (2025-06)
     Evaluating Structure Stability of Self-Supporting 3D Printed Earth-Based Cantilevers Using Robotic ARM
577. Surehali Sahil, Venkatachalam Akshay, Divigalpitiya Ranjith, Kumar Aditya et al. (2025-06)
     Ultra-Low Dosages of Novel Graphene Types Enhance the Rheological Properties and Buildability of 3D Printed Binders
578. Cisowski Adam, Kowalik Michał (2025-06)
     The Influence of the Cross-Sectional Geometry on Stress Concentration in 3D Printed Concrete Elements:
     A Preliminary Study
579. Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
     Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
580. Guillen Ruth, Naldoni Lapo, Quka Katerina, Gioia Flavio et al. (2025-06)
     Water Resistance of 3D Printed Clay with Bio-Stabilizers
581. Tinoco Matheus, Toledo Filho Romildo, Mendoza Reales Oscar (2025-06)
     Rice Husk Bio-Aggregates for 3D Printing in Construction:
     Balancing Fresh and Hardened Properties
582. Sonebi Mohammed, Kaushik Sandipan, Amziane Sofiane, Hamill Gerard (2025-06)
     Optimization of Rheological and Hardened Properties of 3D Concrete Printing
583. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2025-06)
     Fresh and Hardened Properties of Cellulose Fiber-Reinforced Mortars for 3D Printing in Construction
584. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
     Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
     Utilizing Fibers and Recycled Aggregates as Gradient Components
585. Chen Qinbin, Barbat Gabriel, Cervera Miguel (2025-06)
     Finite Element Buildability Analysis of 3D Printed Concrete Including Failure by Elastic Buckling and Plastic Flow
586. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng, Huang Zhongkai (2025-06)
     3D Printed Concrete Tunnel Lining:
     Comparative Study on Mechanical Properties of Curved and Straight Printed Specimens
587. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
     Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
     Insights from Damage Mechanics and Cohesive Zone Approaches
588. Zhang Ruo-Chen, Li Jiaxing, Liu Yiran, Huang Yimiao et al. (2025-06)
     Self-Healing Approach for Micro-Defects in 3D Printed Concrete:
     Microbial Community
589. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
     Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
     Analytical Investigation and Numerical Modelling
590. Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
     Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures
591. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
     Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
     Insights into Mix Ratios, Testing Procedures, and Material Behaviour
592. Makul Natt (2025-06)
     3D Concrete Printing
593. Su Yanli, Wu Chang, Shang Jiaqi, Zhang Pu (2025-06)
     Mechanical Properties of 3D-Printed High-Ductility Cementitious Composite with Sulphoaluminate Cement and Modified Crumb Rubber
594. Kumar Sandeep, Kumar Abhishek, Pundir Aakanksha, Dwivedi Ashutosh et al. (2025-06)
     Low-Clay Soil as Fine Aggregate in 3D Printed Concrete:
     Insights into Fresh and Hardened Properties
595. Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
     Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
596. Pereira Carolina, Vieira Henrique, Gonçalves Nuno, Ascensão Guilherme et al. (2025-05)
     Innovative Waste-Containing 3D-Printed Geopolymer Structures for Enhanced Acoustic Comfort in Built Environments
597. Rojas Jorge, Hasanzadeh Sognad (2025-05)
     An Integrated BIM Planning Workflow for 3D Concrete Printing Projects
598. Trung Hieu Nguyen, Minh Trieu Nguyen, Dang Tri, Thinh Nguyen (2025-05)
     Advanced Sliding Mode Control Strategy for High-Performance 3D Concrete Printing
599. Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
     Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
     Experimental and Analytical Investigations
600. Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
     Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
601. Wang Junsong, Ye Haoran, Sun Yating, Zhang Zixin et al. (2025-05)
     Integration of 3D Printed Fiber Concrete and OpenSeesTO for Enhanced Structural Design
602. Song Xinlei, Xu Quanbiao, Wang Hailong, Sun Xiaoyan et al. (2025-05)
     Flowability-Dependent Anisotropic Mechanical Properties of 3D Printing Concrete:
     Experimental and Theoretical Study
603. Fasihi Ali, Libre Nicolas (2025-05)
     Towards Accurate In-Situ Static Yield Stress Measurement for 3D Concrete Printing:
     A Study on Novel Fast Penetration Test
604. Rückrich Stefanie, Austern Guy, Denay Ofer, Seiwert Paul et al. (2025-05)
     3D-Printed Earth-Fiber Envelopes:
     Optimization of Thermal Performance and Industrial Applicability
605. Geng Songyuan, Cheng Boyuan, Long Wujian, Luo Qiling et al. (2025-05)
     Co-Driven Physics and Machine Learning for Intelligent Control in High-Precision 3D Concrete Printing
606. Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
     An Overview of 3D Printed Concrete for Building Structures:
     Material Properties, Sustainability, Future Opportunities, and Challenges
607. Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
     A Comprehensive Analysis on Material Properties and Specialized Applications in 3D Concrete Printing
608. Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
     Recent Innovations and Implementations of 3D Printing in the Building and Construction Sector
609. Nayaka Ramesh, Kumar H., Sharif Ahamed, Zhang Y. (2025-05)
     Exploring Key Aspects and Sustainable Benefits of 3D Concrete Printing (3DCP):
     A Selective Review
610. Qi Pengfei, Wang Ziyuan, Yu Ruifang, Pei Qiang et al. (2025-05)
     Optimization Design and Regression Model Analysis of Mechanical Properties of 3D Printed Concrete
611. Yu Kun-Hao, Teng Teng, Nah So, Chai Hua et al. (2025-05)
     3D Concrete Printing of Triply Periodic Minimum Surfaces for Enhanced Carbon Capture and Storage
612. Nieświec Martyna, Chajec Adrian, Šavija Branko (2025-05)
     Effect of Ground Copper Slag on the Fresh Properties of 3d Printed Cementitious Composites
613. Sun Yuhang, Wang Haonan, Zhang Yi, Liu Xiongfei et al. (2025-05)
     Spray-Based 3D Printed Foam Concrete:
     Stress Concentration Relieve Utilization
614. Sun Junbo, Aslani Farhad, Mann Dhruv, Huang Bo et al. (2025-05)
     Mechanical and Piezoresistive Behaviour of 3D Printed Self-Sensing One-Way Concrete Slab
615. Ding Tao, Peng Zechen, Dong Haining (2025-05)
     Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures
616. Raza Ali, Junjie Zhang, Fan Jiahui, Umar Muhammad et al. (2025-05)
     Comprehensive Study on the Microstructural and Mechanical Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Integration
617. Raza Saim, Sakha Mahsa, Hassan Zohaib, Manshadi Behzad et al. (2025-05)
     Flexural Behavior of Stay-in-Place Load-Bearing 3D-Printed Concrete Formwork for Ribbed Slabs
618. Cai Lixiong, Chen Feida, Xie Dingkun, Ye Keming (2025-05)
     Time-Varying Work Performance of Cementitious 3D Printing Mortar:
     Effect of SAC, H-PC and HPMC
619. Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
     Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
620. Asaue Hisafumi, Shiotani Tomoki, Okude Nobuhiro, Ogura Hiroki et al. (2025-05)
     Clarification of Fracture Behaviour of RC Pillar with 3D Concrete Printing Buried Formwork Based on Elastic Wave Technique
621. Čítek David, Melter Oto, Hvizdal Ales, Auska Zuzana et al. (2025-05)
     Experimental 3D Printed Concrete Footbridge
622. Yamamoto Yujin, Kinomura Koji, Murata Satoshi, Asaue Hisafumi et al. (2025-05)
     Seismic Performance of RC Column Surrounded by 3D Printed Concrete Permanent Formwork with Short Fiber
623. Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2025-05)
     Mechanical Properties of Extrusion-Based 3D-Printed Concrete Considering the Thickness of the Printed Layer and Printing Time Interval
624. Mukhtar Faisal (2025-05)
     3D-Printed Concrete Fracture:
     Effects of Cohesive Laws, Mixes, and Print Parameters in 3D EXtended FEM
625. Mei Shiming, Li Zheng-Wei, He Ben, Song Jiaqi et al. (2025-05)
     A Novel Large-Scale 3D Printing Apparatus for Complex Geological Models and Its Application
626. Bettermann Luca, Slepicka Martin, Esser Sebastian, Borrmann André (2025-05)
     Data-Driven Parameter Calibration in Additive Manufacturing for Construction:
     An Introduction to Learning by Printing
627. Ahadi Bahram, Valiente López María (2025-05)
     Zigzag Reinforcement Method for 3D Concrete Printing
628. Sarıkaya M., Benam Shaghayegh, Yılmaz Taner, Erkmen Bülent et al. (2025-05)
     Seismic Performance Assessment of 3D-Printed Concrete Structures
629. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2025-05)
     Flexural Performance of Glass Fiber Textile Reinforced 3D Printed Concrete
630. Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
     From Waste to Strength:
     Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
631. Avşar Yunus, Uysal Mücteba, Akca Abdullah (2025-05)
     Improvement of 3D Printing Properties of MgO Derived Binders by CO2 Curing in Hardened State
632. Chippagiri Ravijanya, Lanjewar Bhagyashri, Kamath Muralidhar, Ralegaonkar Rahul (2025-05)
     Prediction of Construction Materials for Conventional and Alkali-Activated 3D Concrete Printing
633. Salifu N., Bassuoni Mohamed, Guven Gursans (2025-05)
     Performance Evaluation of Limestone-Blended Cement and Cellulose Nanomaterials in 3D Concrete Printing
634. Liu Qiong, Singh Amardeep, Wang Qiming, Qifeng Lyu (2025-05)
     3D-Printed Application in Concretes
635. Asif Usama (2025-05)
     Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
636. Niroumand Hamed, Bałachowski Lech (2025-05)
     Green Building with 3D Printed Earth Materials:
     Current Issues and Future Prospects of 3D Printed Green Houses for the Construction Sector
637. Jin Chenxi, Xu Chenhan, Xu Weishun (2025-05)
     Integrating 3D-Printed Clay Formwork into Thin-Vaulted Green Roof
638. Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
     Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns
639. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
     Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
640. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
     Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
641. Zhang Bo, Tao Yaxin, Zhang Yi, Shields Yasmina et al. (2025-05)
     Mechanical Properties of 3D Printed Concrete with 2D Infill Patterns Including Print Path Crossings
642. Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
     Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
643. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
     Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
     A Review of Advances in Laboratory and Real-Scale Construction Projects
644. Görtzen Tom, Neef Tobias, Scheffler Philipp, Macek Domen et al. (2025-05)
     3D Concrete Printing of Topological Interlocking Blocks
645. Gribonval Alice, Pierre Maxime, Ducoulombier Nicolas, Sab Karam et al. (2025-05)
     Multi-Physics Modelling of 3D-Printed Concrete Evolution in Environmental Conditions
646. Chen Zhaohui, Yue Ziyi, Gerong Wangdui, Wang Zhenyue et al. (2025-05)
     Effect of Orthotropy and Printing Patterns on the Bending Performance of 3D Printed Concrete Grid Components
647. Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
     Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
648. Safal K., Liu Han, Lopes Sousa Israel, Laflamme Simon et al. (2025-05)
     Investigation of 3D Printed Concrete for Real-Time Monitoring of Additive Manufacturing Process
649. Lopes Sousa Israel, Liu Han, Alessandro Antonella, Laflamme Simon et al. (2025-05)
     Piezoresistive Performance of 3D Printed Cementitious Composites Doped with Carbon Microfibers
650. Aminpour Nima, Memari Ali (2025-05)
     Development of EPS Light‐weight Concrete for 3D Printing
651. Luo Xiaoyu, Zhao Yuqi, Yao Xiaofei, Zou Cunjun et al. (2025-05)
     3D Printing Concrete Interface Treatment Based on Physical and Chemical Methods:
     A Review
652. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
     Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
     Recovery of Mechanical Performance and Self-Sealing Capability
653. Jia Yanhong, Chen Yao, Li Yanchen, Le Huirong (2025-05)
     Impacts of the Rheological Performance on Dynamic Printing of Metakaolin-Based Geopolymer
654. Kuang Hao, Deng Yang, Wang Dong, Jian Shouwei et al. (2025-05)
     Strengthening Effect of In-Situ Sprayed UV-Curable Polyurethane-Acrylate Resin Coating on Slag-Based 3D Printing Concrete
655. Liang Yingming, He Jincheng, Niu Like, Chen Junwei et al. (2025-05)
     Experimental Study on Printability of Solid Waste Concrete Based on 3D Printing Technology
656. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
     Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
657. Liu Xingzi, Xu Jie, Dobrzanski James, Kolawole John et al. (2025-05)
     Factors Affecting the Flexural Performance of Reinforced 3D Printed Concrete Beams
658. Khanverdi Mohsen, Das Sreekanta (2025-05)
     Performance of Full-Scale 3D-Printed Concrete Walls:
     Effects of Vertical Reinforcements and Window Opening
659. Lori Ali, Novais Rui, Ascensão Guilherme, Fernandes Fábio et al. (2025-05)
     Chemically Foamed Geopolymers for 3D Printing Applications
660. Das B., Prathap Y., Sandeep Ankit, Vaghamshi Keval et al. (2025-05)
     Reviewing the Materials Selection, Rheology, Durability, and Microstructural Characteristics of 3D Printed Concrete
661. Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
     Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
662. Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
     From Printing to Performance:
     A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment
663. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi et al. (2025-05)
     Modelling of 3D Concrete Printing Based on SPH Method with the Herschel-Bulkley-Papanastasiou Rheology Model
664. Zhang Bo, Corte Wouter, Ooms Ticho, Wan-Wendner Roman (2025-05)
     Mechanical Properties of Particle-Bed 3D Printed Concrete Infill Patterns
665. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
     3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
     Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
666. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
     Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
     Experimental Study and Smooth Particle Hydrodynamics Modelling
667. Becher Anton, Gądek Szymon, Korniejenko Kinga (2025-05)
     3D Printing with Geopolymers and Its Applications
668. Hashimoto Katsufumi, Nakase Kota, Yoshihara Rei, Honda Yoshiki et al. (2025-04)
     Evaluation and Investigation of Material and Mechanical Property of 3D Printed Concrete by Means of Non-Destructive Testing Methods
669. Deng Yongjie, Li Nan, Zhong Jianjun, Liang Yun et al. (2025-04)
     Ultrafast-Setting Magnesium Phosphate Cement Prepared from Low-Burned Magnesium Oxide for Mixed Stirring Extrusion Function Integrated 3D Printing Applications
670. Mishra Jyotirmoy, Babafemi Adewumi, Combrinck Riaan (2025-04)
     Limitations and Research Priorities in 3D-Printed Geopolymer Concrete:
     A Perspective Contribution
671. Zuo Zibo, Tao Yaxin, Huang Yulin, Zhang Longlong et al. (2025-04)
     Real-Time Temperature Monitoring to Evaluate the Strength Evolution of 3D Printed Concrete:
     From Lab to In-Situ Printing
672. Dabbaghisouraki Farshad, Tanhadoust Amin, Nehdi Moncef (2025-04)
     Fiber Reinforcement Strategies in 3D Concrete Printing:
     Addressing Challenges and Identifying Research Gaps
673. Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
     The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
     A Review
674. Wu Changzhong, Zhu Xingyu, Wu Liang, An Haibo et al. (2025-04)
     Design and Simulation Analysis of the Extrusion Device of Concrete 3D Printing Device
675. Sun Yifan, Ma Siqi, Chen Qingze, Chen Guoliang et al. (2025-04)
     Lunar Regolith Simulant-Derived 3D-Printed Geopolymers with Optimized Mechanical and Thermal Management Properties
676. Thajeel Marwah, Kopecskó Katalin, Balázs György (2025-04)
     Enhancing Printability of 3D Printed Concrete by Using Metakaolin and Silica Fume
677. Xia Kailun, Chen Yuning, Chen Yu, Jia Lutao et al. (2025-04)
     Programmable Toughening for 3D Printed Concrete and Architected Cementitious Materials
678. An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
     Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens
679. Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
     Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
680. Dörrie Robin, Gantner Stefan, Amiri Fatemeh, Lachmayer Lukas et al. (2025-04)
     From Digital to Real:
     Optimised and Functionally Integrated Shotcrete 3D Printing Elements for Multi-Storey Structures
681. Hua Hao, Liu Yizhuo, Hovestadt Ludger, He Siyuan et al. (2025-04)
     Digital Nervi:
     Performance‐based Design of Lightweight Isostatic Ribbed Slab with 3D Printed Concrete Formwork
682. Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
     Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete
683. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
     Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
684. Huang Jianxiang, Wang Caifeng, Jian Shouwei, Tan Hongbo et al. (2025-04)
     Feasibility of Applying Attapulgite, Sodium Bentonite and Nano-Silica as a Viscosity Modifier Admixture for 3D Printing of Gypsum-Based Materials
685. Zhao Herui, Jiang Quan, Xia Yong, Hou Dongqi et al. (2025-04)
     Microbial-Induced Calcareous Precipitation Effect on Tensile Strength and Early Age Shrinkage of 3D Printed Concrete
686. Gao Jianhao, Niu Yujun, Wang Chaofeng (2025-04)
     Linear Helical Printing:
     A Novel Approach to 3D Printing Concrete Structures with Enhanced Integrity
687. Campos Guilherme, Lunelli Pietro, Moraes Elisângela, Souza Marcelo et al. (2025-04)
     Optimization of Clay-Based Ceramic Mixtures with Sugarcane Bagasse Fiber for 3D Printing
688. Zhang Qiuju, Li Yujia, Huang Yuefan, Li Yangbo et al. (2025-04)
     Utilizing 3D Printing and Distributed Optic Fiber to Achieve Temperature-Sensitive Concrete
689. Cao Xiangpeng, Cui Hongzhi (2025-04)
     Simple Floor Nail Placement Technique to Reinforce 3D-Printed Concrete:
     An Experimental Investigation
690. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
     Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
     A Study of Utilizing Excavated Clay
691. Berawi Mohammed, Sari Mustika, Bakri Helty, Miraj Perdana et al. (2025-04)
     3D Printing Technology for Precast Concrete:
     A Business Process Perspective from Indonesian Construction Sector
692. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-04)
     Examining Global Policy Influences on the Adoption of 3D Concrete Printing Technology:
     A Roadmap for New Zealand
693. Wang Chaofan, Li Bin, Chen Bing (2025-04)
     Enhancing Printability and Mechanical Performance of 3D Printed Magnesium Phosphate Cement Through Silica Fume Modification:
     Rheological, Microstructural, and Numerical Insights
694. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
     Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
695. Dobrzanski James, Xu Jie, Bartek Rasti, Becker Daniel et al. (2025-04)
     From Digital Crafting to Digital Manufacturing:
     Automated Production Using Hybrid 3D Concrete Printing
696. Rudziewicz Magdalena, Hutyra Adam, Maroszek Marcin, Korniejenko Kinga et al. (2025-04)
     3D-Printed Lightweight Foamed Concrete with Dispersed Reinforcement
697. Jesus Manuel, Teixeira João, Guimarães Ana, Rangel Bárbara et al. (2025-04)
     From 3D Survey Data of Cultural Heritage Artifacts to 3D Printed Prototypes Based on Cement and Lime-Based Mortars
698. Zhou Biao, Zhou Hongru, Yoshioka Hideki, Noguchi Takafumi et al. (2025-04)
     Mechanical and Microstructure Evolution of 3D Printed Concrete Interlayer at Elevated Temperatures
699. Ghodke Swapnil, Chowdhury Shubhankar, Singh Bhupinder (2025-04)
     Characterising Flexural Behaviour of Coarse Aggregate-Based 3D Printed Concrete Beams Using Acoustic Emission Technique
700. Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
     Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests
701. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
     Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
702. Kunieda Minoru, To Shunya, Kato Tatsuyoshi, Miyajima Akira (2025-04)
     Failure Behavior of RC Beams by Means of 3D Concrete Printing
703. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-04)
     Multiphysics Modelling for 3D Concrete Printing:
     From Printability to Hardened Properties
704. Sørensen Jesper, Stang Henrik (2025-04)
     Experimental Investigation of the Fatigue Behavior of 3D Printed Steel Fiber Reinforced Concrete
705. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
     Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
706. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
     Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
707. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
     Synergistic Potential of Topology Optimization and Lattice Structures in Concrete 3D Printed Beams
708. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
     Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
     Insights from Water Transport and Structural Evolution
709. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2025-04)
     Rheological and Environmental Implications of Recycled Concrete Powder as Filler in Concrete 3D Printing
710. Liu Junli, Hai Hoang, Tran Mien, Tran Jonathan (2025-04)
     Advancing Microstructural Insights in 3D-Printed Cementitious Materials via X-Ray Micro-Computed Tomography
711. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
     Effect of Nozzle Stand-Off Distance, Printing Interval, and Inclusion of Glass Fiber Mesh Reinforcement in 3D Printed Concrete
712. Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
     Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
713. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
     Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
714. Liu Qiong, Wang Qiming, Sun Chang, Singh Amardeep et al. (2025-04)
     Compressive Performance and Damage Evolution of Concrete Short Columns with Shell-Filling Structure Confined by Continuous Fiber Reinforced 3D Printed Mortar
715. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
     Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing
716. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
     Optimizing 3D Geopolymer Concrete for Sustainable Construction:
     A Review of Material Selection, Printing Methods, and Properties
717. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2025-04)
     Peridynamic Anisotropic Behavior Analysis of 3D-Printed Concrete Structures
718. Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
     Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
     Mechanical Properties, Interlayer Interface and Durability
719. Lin Yuxin, Bayramvand Alireza, Meibodi Mania (2025-04)
     Towards Lightweight Structure:
     Coupling Topology Optimization with Non-Planar 3D Concrete Printing
720. Benros Deborah, Hashemi Arman, Yunsheng Su, Callaghan Carl (2025-04)
     Robotic Micro-House:
     Experience with 3D Concrete Printing for Housing Construction
721. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
     Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
722. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
     Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
723. Kurniati Eka, Kim Heejeong (2025-04)
     Enhancing the Printability of 3D Printing Limestone Calcined Clay Cement Using Hydroxyethyl Cellulose Admixture and Silica Fume
724. Cho Eunsan, Gwon Seongwoo, Cha Soowon, Shin Myoungsu (2025-04)
     Impact of Accelerator on Rheological Properties of Cement Composites with Cellulose Microfibers:
     3D Printing Perspective
725. Zhang Ziqi, Pan Tinghong, Guoa Rongxin, Lin Runsheng et al. (2025-04)
     Simulation and Analysis of Material Stacking and Migration Induced by Extrusion Behavior in 3D Printed Concrete
726. Aman Abdulkerim, Yang Zhe, Xin Yubo, Zhang Xiaoman et al. (2025-04)
     Introducing Magnesium Oxide into 3D Printed Concrete to Mitigate Dry-Shrinkage
727. Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
     3D Printing Technology in Concrete Construction
728. Ravichandran Darssni, Prem Prabhat, Giridhar Greeshma, Bhaskara Gollapalli et al. (2025-04)
     Time-Dependent Properties of 3D-Printed UHPC with Silica Sand, Copper Slag, and Fibers
729. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
     Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
     Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
730. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
     Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete
731. Jiang Yu, Zhang Qingxin, Tabbaa Abir, Daly Ronan (2025-03)
     The Critical Role of Time-Dependent Rheology for Improved Quality Control of 3D Printed Cementitious Structures
732. Xiao Yinan, Hack Norman, Kloft Harald, Lowke Dirk et al. (2025-03)
     Constraint-Based Form-Finding of Space Trusses for Injection 3D Concrete Printing Through Vector-Based Graphic Statics
733. Latifiilkhechi Leva, Aminbakhsh Saman, Akcay Emre (2025-03)
     Investigating the Barriers to the Adoption of 3D Printing Technology in the Turkish Construction Industry
734. Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2025-03)
     Multi-Objective Optimization of a Sustainable LC3 Mortar for 3D Printing
735. Tran Mien, Le Thanh, Cao Nguyen, Nguyen Thi (2025-03)
     Sustainable Prospect for Entire Replacement of River Sand with Recycled Glass Aggregate in 3D Printing Concrete:
     Rheological Properties, Printability, and Alkali-Silica Reaction
736. Liu Chao, Li Xin, Wu Yiwen, Liu Huawei et al. (2025-03)
     Impact of External Loading on the Time-Dependent Evolution of 3D Printed Concrete with Recycled Sand in the Green State
737. Mim Nusrat, Shaikh Faiz, Sarker Prabir (2025-03)
     Sustainable 3D Printed Concrete Incorporating Alternative Fine Aggregates:
     A Review
738. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-03)
     Possibilities for Reducing the Environmental Impact in the Construction Industry Using the Example of a 3D Printed Staircase
739. Nieświec Martyna, Chajec Adrian (2025-03)
     Effect of Materials on the Properties of Fresh Cementitious Composites for 3D Printing:
     Short Review
740. Mansouri Abraham, Wolde Japi, Joda Akram (2025-03)
     The Potential of Sand as a Sustainable Infill for 3D Concrete Printed Building Walls
741. Rajczakowska Magdalena (2025-03)
     Trends in Bio-Based 3D Concrete Printing:
     An NLP-Driven Analysis
742. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
     Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
743. Nassrullah Ghaith, Ali Mohd, Rub Rashid, Cho Cung-Suk et al. (2025-03)
     Optimizing Cement-Based Material Formulation for 3D Printing:
     Integrating Carbon Nanotubes and Silica Fume
744. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
     Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
745. Mesnil Romain, Rosa Pedro, Demont Léo (2025-03)
     Thickness Optimisation in 3D Printed Concrete Structures
746. Li Yuhan, Rian Iasef, Chen Hanmei, Tang Shu (2025-03)
     Application of Fractal Curves for 3D Concrete Printing of Porous Prefab Panels
747. Vargas José, Westerlind Helena, Breseghello Luca, Silfwerbrand Johan (2025-03)
     Design of Porous Structures in 3D Concrete Printing Using Procedural Print Patterns
748. Calmanovici Miran, Livne Achiya, Barath Shany (2025-03)
     From Waste to Resource:
     A Design to Fabrication Approach Integrating Recycled Wood-Mycelium Mixtures for 3D Printing in Architecture
749. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
     Seismic Performance of 3D Printed Reinforced Concrete Walls:
     Experimental Study and Numerical Simulation
750. Li Shunuo, Xu Haoyi, Xia Xinyue, Fan Haojie et al. (2025-03)
     Bio-Envelop:
     Robotic 3D Printed Facade Using Cow Dung and Laterite Soil
751. Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
     In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
752. Li Hualong, Shi Ye, Rong Hui, Dai Kaichao (2025-03)
     Effect of Additives on the Performance of 3D-Printing Ultra-High Performance Concrete
753. Hlobil Michal, Michel Luca, Pundir Mohit, Kammer David (2025-03)
     A Thermo-Hygro Model to Determine the Factors Dictating Cold Joint Formation in 3D Printed Concrete
754. Chen Wei, Pan Jinlong, Zhu Binrong, Han Jinsheng et al. (2025-03)
     Nonlinear Predictive Modeling of Building Rates Incorporating Filament Compression Deformations in 3D Printed Geopolymer Concrete
755. Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
     Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
756. Zhou Wen, Xu Yading, Meng Zhaozheng, Xie Jinbao et al. (2025-03)
     Filament Stitching:
     An Architected Printing Strategy to Mitigate Anisotropy in 3D-Printed Engineered Cementitious Composites
757. Khanverdi Mohsen, Das Sreekanta (2025-03)
     Testing Prisms as a Method for Assessing Compressive Properties of 3D-Printed Structural Members:
     Experimental and Numerical Studies
758. Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
     A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
759. Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
     Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
760. Liu Han, Laflamme Simon, Cardinali Amelia, Lyu Ping et al. (2025-03)
     Enhancing 3D-Printed Cementitious Composites with Recycled Carbon Fibers from Wind Turbine Blades
761. Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
     Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
     A Case Study of a Full-Size Two-Story Building
762. Rajendran Naveenkumar, Runge Troy, Bergman Richard, Nepal Prakash et al. (2025-03)
     Economic and Environmental Impact Analysis of Cellulose Nanocrystal-Reinforced Cementitious Mixture in 3D Printing
763. Minde Pravin, Patil Jagruti (2025-03)
     A Comprehensive Review of Factors Affecting 3D Printing Technology Adaptation in the Indian Construction Sector
764. Miri Zahra, Baaj Hassan, Polak Maria (2025-03)
     3D-Printed Concrete Bridges:
     Material, Design, Construction, and Reinforcement
765. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
     The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
766. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-03)
     Investigating Shrinkage and Mechanical Properties of 3D Printed Concretes Under Different Curing Conditions
767. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
     Fire Performance Evaluation of 3D-Printed Concrete Walls:
     A Combined Full-Scale and Numerical Modeling Approach
768. Özalp Abdulkadir, Aldemir Alper (2025-03)
     Artificial Intelligence-Based Displacement Capacity Prediction Tool for Three-Dimensional Printed Concrete Walls
769. Li Yuhan, Rian Iasef, Chen Hanmei, Tang Shu (2025-03)
     Application of Fractal Curves for 3D Concrete Printing of Porous Prefab Panels
770. Vargas José, Westerlind Helena, Breseghello Luca, Silfwerbrand Johan (2025-03)
     Design of Porous Structures in 3D Concrete Printing Using Procedural Print Patterns
771. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
     Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
772. Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
     Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
773. Kuang Weifeng, Pavlenko Petro, Guo Haoyu, Tian Kuo et al. (2025-03)
     Utilization of Machine-Made Sand Waste in 3D-Printed Ecological Concrete for Artificial Reefs
774. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wu Fei et al. (2025-03)
     Automated Analysis System for Micro-Defects in 3D Printed Concrete
775. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-03)
     Experimental Study on Rheological Properties and 3D Printing of Simulated Lunar Soil Polymers
776. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Feys Dimitri et al. (2025-03)
     Evaluation of Fresh Properties of High Calcium Content Fly Ash-Based Alkali-Activated 3D-Printed Mortar
777. Jiang Youbau, Liu Yan, Zhang Zupan, Gao Pengxiang et al. (2025-03)
     Tensile Performance of Interlayer Interface of Interlocking 3D Printed Concrete with Single Toothlike Nozzle
778. Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
     Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
     Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
779. Khanverdi Mohsen, Das Sreekanta (2025-03)
     Experimental Study on Water Penetration and Thermal Resistance of Large-Scale 3D-Printed Cementitious Walls
780. Skripkiūnas Gintautas, Tolegenova Aigerim, Rishko Lyudmyla, Akmalaiuly Kenzhebek et al. (2025-03)
     Durability and Cracking Defects in 3D-Printed Concrete
781. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Nunes Ueslei et al. (2025-03)
     Effect of Lightweight Expanded Clay Aggregate (LECA) On the Printability of Cementitious Compositions for 3D Printing
782. Silveira Júnior Jairon, Sakata Rafael, Onghero Lucas, Matos Paulo et al. (2025-03)
     Al-Anodizing Waste as a Supplementary Cementitious Material for 3D-Printed Portland Cement
783. Liu Xiongfei, Guo Pei, Wang Haonan, Zhang Yi (2025-03)
     Spray-Based 3D Printed Cementitious Electromagnetic Wave Absorption Materials:
     Optimization with Structures Design
784. Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
     Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
785. Akhrif Iatimad, Oulkhir Fatima, Jai Mostapha, Rihani Nadir et al. (2025-03)
     Earth-Based Materials 3D Printing, Extrudability and Buildability Numerical Investigations
786. Shahzad Qamar, Li Fangyuan (2025-03)
     Influence of Concrete Interfaces on the Damage and Pull-Out Behavior of 3D-Printed Concrete Structures
787. Sharma Shivam, Tahlawi M., Delavar Mohammad, Sideris Petros (2025-03)
     Structural Design Methodology for Low-Rise 3D Printed Concrete (3DPC) Buildings Subjected to Non-Seismic Loading:
     Description, Application and Validation
788. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-02)
     Effect of Air-Entraining Agent on Hardened Properties of 3D Printed Concrete with Emphasis on Permeability and Air Void Structure
789. Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
     Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
790. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
     Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
     An Experimental Approach
791. Duan Zhenhua, Tao Jie-Lin, Lin Can, Jiao Dengwu et al. (2025-02)
     3D Printing-Driven Dynamic Migration of Lightweight Microspheres in the Printable Mortars:
     Experiment and Modelling
792. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
     Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
793. Ramirez Rodriguez Fatima, Pancho Paolo, Sanchez Daniela, Poudel Suman et al. (2025-02)
     Design and Development of a Lean Robotic Cell for Concrete 3D Printing
794. Salaimanimagudam M., Jayaprakash Jaganathan, Anwar Mohammed (2025-02)
     Selection of Reinforcement Incorporation Method for 3D Printed Concrete Using MCDM
795. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-02)
     Permeability and Electrical Resistivity of 3D-Printed Mortars Using Local Materials (Zeolite, Calcined Clay, and Mussel Shell Powder):
     Aotearoa, New Zealand
796. Vasilić Ksenija (2025-02)
     Standardization Aspects of Concrete 3D Printing
797. Liu Chao, Liu Huawei, Wu Yiwen, Wu Jian et al. (2025-02)
     Effect of X-Ray CT Characterized Pore Structure on the Freeze-Thaw Resistance of 3D Printed Concrete with Recycled Coarse Aggregate
798. Banijamali Kasra, Dempsey Mary, Chen Jianhua, Kazemian Ali (2025-02)
     Machine Learning Approach to Predict the Early-Age Flexural Strength of Sensor-Embedded 3D-Printed Structures
799. Kolawole John, Buswell Richard, Mahmood Sultan, Isa Muhammed et al. (2025-02)
     On the Origins of Anisotropy of Extrusion-Based 3D Printed Concrete:
     The Roles of Filament Skin and Agglomeration
800. Bayat Hamid, Kashani Alireza (2025-02)
     Reducing Material and Energy Consumption in Single-Story Buildings Through 3D-Printed Wall Designs
801. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
     Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
802. Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
     Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
803. Mengistu Girum, Nemes Rita (2025-02)
     Evaluating the Performance of Recycled Aggregate Concrete Incorporating 3D-Printed Concrete Waste as Aggregate Using the Rebound Hammer Test
804. Liu Xiongfei, Li Chuang, Guo Pei, Wang Li et al. (2025-02)
     Spray-Based 3D Printed Tunnel Slag Concrete:
     Evaluation for Printability and Mechanical Performance
805. Palazzo Andrea (2025-02)
     How 3D Printers for Houses Can Reduce CO2 Emissions
806. Cui Weijiu, Liu Wenliang, Guo Ruyi, Da Wan et al. (2025-02)
     Geometrical Quality Inspection in 3D Concrete Printing Using AI-Assisted Computer Vision
807. Sangiorgio Valentino, Rossetti Pietro, Polidoro Anthony, Rossi Emilio (2025-02)
     Sustainable Raw-Earth Blocks Achieved with 3D-Printed Formworks:
     Parametric Modeling, Prototyping, and Laboratory Testing
808. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-02)
     Strategies for Minimizing Environmental Impact in Construction:
     A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase
809. Zavaleta Diana, Quispe Axcel, Rojas Omar, Silva Guido et al. (2025-02)
     3D-Printing of a Basic Housing Unit Prototype Using Earthen-Based Matrices Stabilized with Rice Husk Fibers
810. Liu Qiang, Jiang Quan, Zhao Herui, Yu Yang et al. (2025-02)
     Porous Diatomite Promotes Lightweight and Low-Carbon Concrete 3D Printing:
     An Exploratory Study
811. Park Ji-seul, Jeong Seung-Su, Hong Seungkee, Lee Seohyung et al. (2025-02)
     Mechanical Modeling for Prediction of Structural Stability of Cylindrical Structures During 3D Concrete Printing
812. Akkoyun Furkan, Günal Ayse (2025-02)
     The State of 3D Concrete Printing:
     Current Applications and Future Opportunities
813. Sangiorgio Valentino, Bianchi Iacopo, Forcellese Archimede (2025-02)
     Advancing Decarbonization Through 3D Printed Concrete Formworks:
     LIFE Cycle Analysis of Technologies, Materials, and Processes
814. Zeng Jun-Jie, Sun Hou-Qi, Deng Run-Bin, Yan Zitong et al. (2025-02)
     Bond Performance Between FRP-Bars and 3D-Printed High-Performance Concrete
815. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
     Establishing Benchmark Properties for 3D-Printed Concrete:
     A Study of Printability, Strength, and Durability
816. Zhao Hongyu, Wang Xiangyu, Chen Zhaohui, Liu Xianda et al. (2025-02)
     Microcrack Investigations of 3D Printing Concrete Using Multiple Transformer Networks
817. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
     Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
818. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
     Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
819. Senthilnathan Shanmugaraj, Raphael Benny (2025-02)
     Predicting Buildability Using the Surface Texture of 3D Printed Concrete Elements
820. Manny Agemar, Dehn Frank (2025-02)
     Basics of 3D Printing in Concrete Construction:
     Recommendations for Practice
821. Rudziewicz Magdalena, Maroszek Marcin, Hutyra Adam, Góra Michał et al. (2025-02)
     Influence of Foaming Agents and Stabilizers on Porosity in 3D Printed Foamed Concrete
822. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
     A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
823. Fediuk Roman, Amran Mugahed, Pavlík Zbyšek (2025-02)
     Editorial:
     Special Issues for “Emerging Materials for 3D Printing in Construction”
824. Zhi Yefan, Chai Hua, Teng Teng, Akbarzadeh Masoud (2025-02)
     Automated Toolpath Design of 3D Concrete Printing Structural Components
825. Arash Motalebi, Mohammad Aba, Golam Kabir (2025-01)
     Assessing the Environmental Impact of Building Houses in Remote Areas:
     3D Printing vs. Traditional Construction Techniques
826. Alós Shepherd David, Dehn Frank, Kuhn Alexander, Degen Robin et al. (2025-01)
     3D Concrete Printing of Solid Wall Cross-Sections with Truckmounted Concrete Pump:
     A Report on the First Printed Structure in Germany
827. Wu Changzhong, Lu Yuanyuan, Tian Jiaxin, Zhu Xingyu et al. (2025-01)
     Research on 3D Printed Section of Concrete Based on Robot Arm and Structural Design of Sprinkler Head
828. Sangiorgio Valentino, Floris Ignazio, Duran Dayan (2025-01)
     Unified Integration Approach for Bridging BIM Model to 3D Construction Printing and Scale Prototyping
829. Du Guoqiang, Qian Ye (2025-01)
     Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
830. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
     Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
     Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
831. Kumar Soni Ashish, Anil Sangwai Keyur, Panda Biranchi (2025-01)
     In-Process Monitoring and Quality-Assessment of 3D Concrete Printing Process
832. Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
     Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
833. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
     Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
834. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
     Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
     Properties, Mechanism, and Environmental Impacts
835. Tanyildizi Harun, Coskun Ahmet, Seloglu Maksut, Durmaz Taner (2025-01)
     Examination of Mechanical Properties of 3D Printed Geopolymer-Mortar Using the Taguchi -Method
836. Zhong Jianjun, Lyu Libo, Deng Yongjie, Ma Haiyan et al. (2025-01)
     An Evaluation-Method for the Printability of Magnesium-Phosphate-Cement Concrete for Integrated Mixing-Stirring-Extrusion Rapid 3D Printing
837. Khan Shoukat, Koç Muammer (2025-01)
     Advancements in Additively Manufactured Safety Materials:
     Energy-Efficient 3D Printing Solutions for Critical Infrastructure
838. Chen Meng, Yu Kanghao, Zhang Tong, Wang Yuting (2025-01)
     Characterizing and Modelling the Bond-Slip-Behavior of Steel-Bars in 3D Printed Engineered Cementitious Composites
839. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
     Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
     Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
840. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
     Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
     Experiment, Microstructure, and Mechanism Analysis
841. Wang Yibo, Yan Ming, Yang Kun, Ao Chenyang et al. (2025-01)
     Effect of Wall-Slip on the Extrusion-Characteristics of 3D Printing of Cementitious Materials
842. Ahn Eunjong, Han Seongho, Shin Myoungsu, Khayat Kamal et al. (2025-01)
     Novel Method to Evaluate 3D Printed Concrete Quality Using Ultrasonic Scatter-Energy-Techniques
843. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
     Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
844. Zhang Tianjie, Wang Donglei, Lu Yang (2025-01)
     A Navier-Stokes-Informed Neural Network for Simulating the Flow-Behavior of Flowable Cement-Paste in 3D Concrete Printing
845. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
     Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
846. Çapunaman Özgüç, Farrokhsiar Paniz, Bilén Sven, Duarte José et al. (2025-01)
     Vision-Based Sensing and Digital Twin-Technologies in Conformal 3D Concrete Printing:
     Exploring Operational Accuracy, Adaptability, and Scalability, and Investigating Monitoring-Capabilities in Large-Scale Applications
847. Pierre Alexandre, Perrot Arnaud (2025-01)
     Alternative Printing-Methods for Cementitious Materials
848. Do Duc, Diab Zeinab, Rémond Sébastien, Hoxha Dashnor (2025-01)
     Numerical Simulation-Tools for 3D Printing
849. Caron Jean-François, Ducoulombier Nicolas, Demont Léo (2025-01)
     Reinforcement of Printed Structures
850. Kuzmenko Kateryna, Roux Charlotte, Féraille Adélaïde (2025-01)
     Environmental Impact of 3D Concrete Printing
851. Mesnil Romain, Duballet Romain, Baverel Olivier (2025-01)
     Structural Applications of 3D Printing
852. Perrot Arnaud, Jacquet Yohan (2025-01)
     3D Concrete Printing by Extrusion and Filament-Deposition
853. Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
     Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies
854. Perrot Arnaud, Jacquet Yohan, Amziane Sofiane (2025-01)
     3D Concrete Printing
855. Oulkhir Fatima, Rihani Nadir, Akhrif Iatimad, Jai Mostapha (2025-01)
     Integration of Earth-Based Materials in 3D Concrete Printing:
     Physico-Chemical and Technological Characterization
856. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
     Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
     From Material-Design to Structural Bearing-Capacity-Assessment
857. Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
     Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
     Mechanical Properties and Environmental Impact Analysis
858. Shazad Qamar, Li Fangyuan (2025-01)
     Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
     A Combined Experimental and Numerical Study
859. Zhang Yonghong, Cui Suping, Yang Bohao, Wang Xinxin et al. (2025-01)
     Research on 3D Printing Concrete Mechanical Properties-Prediction-Model Based on Machine-Learning
860. Baş Sercan, Aydın Ozan, Bundur Zeynep, Guven Gursans (2025-01)
     Building Information Modeling (BIM)-Based On-Site 3D Printer Position-Optimization and Path-Planning for Digital Fabrication
861. Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
     Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites
862. Hanžič Lucija, Štefančič Mateja, Šter Katarina, Zalar Serjun Vesna et al. (2025-01)
     Collision Milling of Oil Shale Ash as Constituent Pretreatment in Concrete 3D Printing
863. Li Leo, Zhang Guang-Hu, Kwan Albert (2025-01)
     Exploring Submarine 3D Printing:
     Enhancing Washout-Resistance and Strength of 3D Printable Mortar
864. Licciardello Lucia, Soto Alejandro, Kaufmann Walter, Metelli Giovanni (2025-01)
     Determining the Strength of 3D Printed Concrete with the Modified Slant-Shear-Test
865. Elango K., Saravanakumar R., Vivek D., Yuvaraj S. et al. (2025-01)
     A Critical Review of Fresh, Hardened and Durability Properties of 3D Printing Concrete
866. Posani Magda, Voney Vera, Odaglia Pietro, Du Yi et al. (2025-01)
     Low-Carbon Indoor Humidity Regulation via 3D Printed Superhygroscopic Building Components
867. Vysochinskiy Dmitry, Madsen Gunnar, Lande Ingrid (2025-01)
     An Experimental Study of Consistency and Strength Variation of 3D Printed Concrete Mixes
868. Alam Shaurav, Gordon Stephen, Bassett Blake, Cobb Kevin et al. (2025-01)
     Three-Dimensional Printing of Fly-Ash-Based Geopolymer Materials
869. Zhang Yonghong, Cui Suping, Wang Xinxin, Yang Bohao et al. (2025-01)
     Microstructure and Performance of Recycled Wind Turbine Blade-Based 3D Printed Concrete
870. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
     Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
871. Shahzad Qamar, Li Fangyuan (2025-01)
     Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures
872. Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
     Case Study of 3D Printed Concrete as Compared to Conventional Construction:
     Structural Comparison and Life Cycle Carbon Assessment
873. Aydoğan Olcay, Kelek Bedirhan, Dittel Gözdem, Bhat Shantanu et al. (2025-01)
     Performance of 3D Printed Mortar with Varying Textile Reinforcement Properties
874. Obermeier Nico, Richter Christiane, Wiese Felix, Stengel Thorsten (2025-01)
     Low Global-Warming-Potential and Resource-Efficient 3D Printing Cement-Based Concrete
875. Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
     Advancing Structural Reinforcement in 3D Printed Concrete:
     Current Methods, Challenges, and Innovations
876. Brunner Kim, Stengel Thorsten, Kustermann Andrea (2025-01)
     3D Particle-Bed Printing Using Different Cementitious Binders and Recycled Sand
877. Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
     3D Printed Concrete for Sustainable Construction:
     A Review of Mechanical Properties and Environmental Impact
878. Souza Eduarda, Rodrigues e Silva Rafaela, Ribeiro Borges Paulo (2025-01)
     Overburden Materials from the Iron Mining as Raw Materials for AAM:
     Preliminary Assessment of Mixes for 3D Concrete Printing
879. Liu Qiong, Wang Qiming, Sun Chang, Li Jiawang et al. (2025-01)
     Inter-Layer Shear Strength and Bonding Strength of Sinuous 3D Printed Mortar
880. Schossler Rodrigo, Ullah Shafi, Alajlan Zaid, Yu Xiong (2025-01)
     Data-Driven Analysis in 3D Concrete Printing:
     Predicting and Optimizing Construction Mixtures
881. Sun Hou-Qi, Zeng Jun-Jie, Hong Guang-Yao, Zhuge Yan et al. (2025-01)
     3D Printed Functionally Graded Concrete Plates:
     Concept and Bending Behavior
882. Kandy Sharu, Remke Sebastian, Ranganathan Thiyagarajan, Wani Shubham et al. (2025-01)
     Design and Function of Thermoresponsive-Ultrafast Stiffening Suspension Formulations for 3D Printing
883. Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
     The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
884. Jiang Youbau, Gao Pengxiang, Adhikari Sondipon, Yao Xiaofei et al. (2024-12)
     Studies on the Mechanical Properties of Inter-Layer Interlocking 3D Printed Concrete Based on a Novel Nozzle
885. Fahfouhi Karim, Varum Humberto, Almeida Henrique, Craveiro Flávio et al. (2024-12)
     Reshaping Africa’s Sustainable Future Through 3D Printing
886. Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
     Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
     A Review
887. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
     From Local Earth to Modern Structures:
     A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
888. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-12)
     An Eco-Friendly Ultra-High-Performance Geopolymer Concrete with Quaternary Binders for 3D Printing
889. Raqeb Hanan, Ghaffar Seyed (2024-12)
     3D Concrete Printing in Kuwait:
     Stakeholder Insights for Sustainable Waste Management Solutions
890. Shafei Hazwani, Arpa Ar, Rahman Rahimi, Algahtany Mohammed et al. (2024-12)
     Difficulties and Benefits of Implementing 3D Printing in Housing Development
891. Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
     Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork
892. Tarhan Yeşim, Tarhan İsmail, Şahin Remzi (2024-12)
     Comprehensive Review of Binder Matrices in 3D Printing Construction:
     Rheological Perspectives
893. Yabanigül Meryem, Özer Derya (2024-12)
     Exploring Architectural Units Through Robotic 3D Concrete Printing of Space-Filling Geometries
894. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
     Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
895. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2024-12)
     CO2 Sequestration and Low-Carbon-Strategies in 3D Printed Concrete
896. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
     Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
897. Zhao Zhihui, Cai Xianhuan, Chen Fan, Gong Yongfan et al. (2024-12)
     Effect of Wollastonite-Content on Rheology and Mechanical Properties of 3D Printed Magnesium-Potassium-Phosphate-Cement-Based Material of MgO-SiO2-K2HPO4
898. Huang Junxiang, Peng Zeqin, Tan Xianzhong, Gong Guofang et al. (2024-12)
     Mechanism Analysis of the Magnetic Field-Assisted 3D Printed Steel-Fiber-Reinforced Concrete
899. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
     High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
     Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
900. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
     Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
     Experiment and Finite Element Study
901. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
     Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
902. Aminpour Nima, Memari Ali (2024-12)
     Analysis of Anisotropic Behavior in 3D Concrete Printing for Mechanical Property Evaluation
903. Tarhan Yeşim, Şahin Remzi (2024-12)
     The Impact of Air-Entraining on Frost-Endurance in 3D Printed Concrete:
     The Function of Printing Orientation and Curing Process
904. Latha P., Shanmugavelu V., Tamilmani A., Thayalnayaki D. et al. (2024-12)
     Evaluating 3D Concrete Printing Effectiveness Through a Comparative Study Using SVM, Decision Trees, and Random Forest Techniques
905. Shilton Robert, Wang Shen, Banthia Nemkumar (2024-12)
     Use of Polysaccharides as a Rheology-Modifying-Admixture for Alkali-Activated Materials for 3D Printing
906. Glotz Theresa, Rasehorn Inken, Petryna Yuri (2024-12)
     Mechanical Behavior of Hardened Printed Concrete and the Effect of Cold Joints:
     An Experimental Investigation
907. Bahoria Boskey, Bhagat Rajesh, Pande Prashant, Raut Jayant et al. (2024-12)
     Design-Optimization of 3D Printed Concrete Elements Considering Life Cycle Assessment and Life Cycle Costing
908. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
     Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
909. Pham Thi, Huang Jie (2024-12)
     3D Printed Artificial Coral Reefs:
     Design and Manufacture
910. Maroszek Marcin, Rudziewicz Magdalena, Hutyra Adam, Dziura Paweł et al. (2024-12)
     Evaluation of 3D Concrete Printing Extrusion-Efficiency
911. Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
     Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures
912. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
     Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
     Corrigendum
913. Ali Md., Abilgaziyev Anuar, Temirzakuly Bakbergen, Kurokawa Syuhei (2024-12)
     Development of a Novel 3D Construction Printer for Consistent Buildability of Novel Geopolymer Mortar and Its Challenges
914. Cao Xiangpeng, Wu Shuoli, Cui Hongzhi (2024-12)
     Experimental Study on In-Situ Mesh Fabrication for Reinforcing 3D Printed Concrete
915. Du Longyu, Zhou Jiehang, Lai Jianzhong, Yin Xuexiang et al. (2024-12)
     Dynamic Damage Behavior and Anisotropic Mechanism of 3D Printed Reinforced Concrete Subjected to Penetration
916. Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
     Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks
917. Zuo Zibo, Tao Yaxin, Corte Wouter (2024-12)
     Experimental Research of Concrete Temperature-Distribution During Large-Scale On-Site 3D Printing Based on Infrared-Thermal-Imaging
918. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
     Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
919. Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
     Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
920. Mohammed Arafat, Tamimi Adil, Abdwais Ahmed (2024-12)
     Structural Performance of 3D Concrete Printed Load-Bearing Walls
921. Li Fangyuan, Hu Xiangcheng, Shahzad Qamar (2024-12)
     Anisotropic Behavior in 3D Printed Concrete:
     Finite Element Simulation Approach
922. Zhao Shuai, Zhou Ran, Luo Mingming, Liu Jianfei et al. (2024-12)
     Distributed Fiber Optic Sensing System for Vibration Monitoring of 3D Printed Bridges
923. Wang Qingwei, Han Song, Liu Qi, Yang Junhao et al. (2024-12)
     Research on the 3D Printing Process and Filament Shape of Cementitious Materials in Low Gravity
924. Forcael Eric, Alucema Contreras Elena, Burkart Medina Adolfo, García-Alvarado Rodrigo et al. (2024-12)
     Comparative Study of Visual Programming Procedures for 3D Concrete Printing of Different Geometric Shapes
925. Hass Lauri, Bos Freek, Salet Theo (2024-12)
     Bond Governed Interactions Between Helical Reinforcement and 3D Printed Concrete
926. Zhou Longfei, Gou Mifeng, Zhang Haibo, Hama Yukio (2024-12)
     Investigation of Activated Bauxite-Tailings for Application in 3D Printed Concrete via a Modified Anderson and Anderson-Model
927. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
     3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
     Design, Manufacturing, and Performance
928. Zhao Hongyu, Jassmi Hamad, Liu Xianda, Wang Yufei et al. (2024-12)
     Artificial Intelligence-Based Microcracks Research in 3D Printing Concrete
929. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
     Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
930. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
     Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
     Materials, Engineered Properties and Techniques for Additive Manufacturing
931. Yaqub Walid, Aslani Farhad (2024-12)
     Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
932. Santos da Mata Gomes Daniela, Rocutan Melina, Pereira Lucas, Motezuki Fabio et al. (2024-12)
     Simulation of 3D Concrete Printing Using an Implicit Formulation of the Moving Particle Semi-Implicit Method
933. Andrade Rodrigo, Mendoza Reales Oscar, Carvalho Gonzaga e Silva Ana, Fairbairn Eduardo et al. (2024-12)
     Thermal Behavior of Air-Fluid in Triangular Cavities of 3D Printed Concrete Walls
934. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2024-12)
     Assessing 3D Printed Concrete Process Parameters Through Discrete Element Modeling
935. Nunes Lavynia, Miranda Freitas Juan Oliveira, Abud Vilanova João, Rubin Ariane (2024-12)
     Comparative Analysis of the Construction Feasibility of Special Works of Art Using 3D Concrete Printing, Prefabricated Concrete, and Cast In-Situ
936. Navarrete Iván, Tošić Nikola, Hermida José, Saavedra Ruth et al. (2024-12)
     3D Printed Concrete as a Source of Recycled Aggregates:
     Potential for Multi-Recycling and CO2 Sequestration
937. Silvestro Laura, Ribeiro Rodrigo, Navarrete Iván (2024-12)
     Advancements in Low Carbon-Emission Cements for 3D Printing:
     A State-of-the-Art Review
938. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
     Design of 3D Printed Concrete Masonry for Wall Structures:
     Mechanical Behavior and Strength Calculation Methods Under Various Loads
939. Liu Han, Laflamme Simon, Cai Bin, Lyu Ping et al. (2024-11)
     Investigation of 3D Printed Self-Sensing UHPC Composites Using Graphite and Hybrid Carbon Microfibers
940. Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
     Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
     An Eco-Friendly Substitute to Conventional Fine Aggregates
941. Rasel Risul, Hossain Md, Zubayer Md, Zhang Chaoqun (2024-11)
     Exploring the Fresh and Rheology Properties of 3D Printed Concrete with Fiber-Reinforced Composites:
     A Novel Approach Using Machine Learning Techniques
942. Ge Yali, Yao Jie (2024-11)
     Influence of FA and HPMC on the Fresh Properties and Anisotropy of 3D Printing Engineered Cementitious Composites
943. Medvedev Vyacheslav, Pustovgar Andrey, Adamtsevich Aleksey, Adamtsevich Liubov et al. (2024-11)
     Improving Inter-Layer Adhesion of Cementitious Materials for 3D Construction Printing
944. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-11)
     Comparative Environmental Value-Stream-Assessment of Off-Site and On-Site 3D Construction Printing Processes
945. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
     Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
946. Jin Willy, Caron Jean-François, Ouellet-Plamondon Claudiane (2024-11)
     Minimizing the Carbon Footprint of 3D Printing Concrete:
     Leveraging Parametric LCA and Neural Networks Through Multi-Objective-Optimization
947. Lu Haoyu, Zhang Lizhi, Wang Junkai, Shi Zhaoxin et al. (2024-11)
     Penetration-Test of Sheet-Like Indenter for Yield-Stress-Assessment of 3D Printed Concrete
948. Sikora Paweł, Rathnarajan Sundar, Federowicz Karol, Techman Mateusz et al. (2024-11)
     Use of Seawater as an Accelerator in 3D Printed Concrete
949. Dai Xiaodi, Kandy Sharu, Neithalath Narayanan, Kumar Aditya et al. (2024-11)
     Thermally Stimulated Stiffening and Fly-Ash’s Alkaline-Activation by Ca(OH)2 Addition Facilitates 3D Printing
950. Sahoo Pitabash, Gupta Souradeep (2024-11)
     3D Printing with Geopolymer-Stabilized Excavated Earth:
     Enhancement of Printability and Engineering-Performance Through Controlled Retardation
951. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
     Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
952. Wang Qingwei, Han Song, Yang Junhao, Li Ziang et al. (2024-11)
     Optimizing Printing and Rheological Parameters for 3D Printing with Cementitious Materials
953. Kosson Michael, Brown Lesa, Thorne Garret, Sanchez Florence (2024-11)
     Influence of Internal Architecture and Ink Formulation on the Thermal Behavior of 3D Printed Cementitious Materials
954. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
     Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
955. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
     Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
956. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
     3D Printing with Wood Waste:
     Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
957. Costalonga Vanessa, Dahy Hanaa (2024-11)
     From Filament to Structure:
     3D Printing of Natural Fiber Filaments for Architecture
958. Vasey Lauren, Chadha Kunaljit, Kango Ananya, Leung Victor et al. (2024-11)
     Impact Printing:
     A Novel Robotic Additive Manufacturing Method for Circular, High-Volume Construction
959. Qian Sen, Li Changqi, Zhao Zeyap, Zi Bin (2024-11)
     Modeling and Experimental Validation of a Cable-Driven Robot for Three-Dimensional Printing Construction
960. Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
     Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
     A Systematic Review
961. Sun Zhaoyang, Zhao Yuyang, Hou Dongshuai, Li Zongjin et al. (2024-11)
     Rheology-Control of Cement-Paste by In-Situ Polymerization for 3D Printing Applications
962. Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
     3D Printing of Ultra-High-Performance Concrete:
     Shape Stability for Various Printing Systems
963. Han Xiaoyu, Yan Jiachuan, Huo Yanlin, Chen Tiefeng (2024-11)
     Effect of Carbonation-Curing-Regime on 3D Printed Concrete:
     Compressive Strength, CO2 Uptake, and Characterization
964. Günzel F., Moelich Gerrit, Kanyenze Simba, Kruger Jacques et al. (2024-11)
     Investigating Inherent Cement Setting Mechanisms to Improve the Constructability Performance of Extrusion-Based 3D Concrete Printing
965. Jørgensen Henrik, Hansen Steen, Jespersen Esra, Florenzano Daniele et al. (2024-11)
     Experimental Investigation of Key Structural Parameters for Structural Design of 3D Printed Concrete
966. Taleb Maria, Bulteel David, Montagne Alex, Roudet Francine et al. (2024-11)
     Influence of Thermo-Hygrometric Conditions on the Interface Bond in 3D Printed Concrete
967. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
     3D Printing of a Multi-Performative Facade:
     Assessment of Air Permeability, Water Tightness, Wind Loads, and Impact Resistance
968. Tish Daniel, Gan Amelia, Cabral Sophia, Bechthold Martin (2024-11)
     Toward a Digital Vernacular:
     Framework for Localized Biocomposite 3D-Printing with Natural Fibers
969. Teng Teng, Zhi Yefan, Akbarzadeh Masoud (2024-11)
     Gradient Multimaterial Printing:
     Integrated and Tailored Thermal Insulation Through Gradient Multimaterial Additive Manufacturing for Masonry Architectural Components
970. Lin Yuxin, Meibodi Mania (2024-11)
     Integrated Sensing Printhead:
     In-line Data Collection for Non-Planar 3D Concrete Printing
971. Ding Yahong, Tong Jiaqi, Zhang Meixiang, Guo Shuqi et al. (2024-11)
     Effect of Aggregate Gradation on the Properties of 3D Printed Recycled Coarse Aggregate Concrete
972. Kozub Barbara, Sitarz Mateusz, Gądek Szymon, Ziejewska Celina et al. (2024-11)
     Upscaling of Copper Slag-Based Geopolymer to 3D Printing Technology
973. Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
     Sustainability Principles in 3D Concrete Printing:
     Analysing Trends, Classifying Strategies, and Future Directions
974. Cabay Edouard, Ayoub Sara (2024-11)
     Earth Architecture:
     Integtrating Tradition for 3D Printing Solutions
975. Kleibel-McGee Kilian, Gosch Lukas, Jauk Julian, Ristoski Kristijan et al. (2024-11)
     Integration of Weaving- and Sewing-Motions into the 3D Printing of Clay for Lightweight Ceramic-Structures
976. Bartaky Markus, Gosch Lukas, Stavric Milena (2024-11)
     Sustainable Temporary Housing:
     An Evaluation-Framework for Large-Scale 3D Printer for Adobe Construction in Challenging Environments
977. Lori Ali, Mehrali Mehdi (2024-11)
     Mechanical Properties and Crack-Deflection Mechanisms in 3D Printed Porous Geopolymers with Cellular Structures
978. Sabra Tarek, Ohno Motohiro, Kurihara Ryota, Kinomura Koji et al. (2024-11)
     Analytical Investigation on the Structural Performance of RC Column with 3D Printed Concrete Permanent Formwork
979. Rajeev Pathmanathan, Sanjayan Jay (2024-11)
     Current Developments in the Application of Extrusion-Based 3D Concrete Printing
980. Vaishali Panneer, Varunkumar P. (2024-11)
     Experimental Study on Behavior of Cement Concrete in 3d Printing
981. Swelim Wafaey (2024-11)
     Is 3D Printed Concrete a Game Changer?!
982. Kruger Jacques, Zijl Gideon (2024-11)
     A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
     From Green to Solid State
983. You Dengyu, Kashani Alireza (2024-11)
     Effect of Environmental Conditions on Shrinkage-Induced Cracking of 3D Printed Mortar
984. Lin Manfang, Yu Kequan (2024-11)
     A Rapid Reinforcement-Technique Using FRP and Steel-Wire Mesh in 3D Printed ECC Beams
985. Menna Costantino (2024-11)
     Seismic Performance of Large-Scale 3D Printed Concrete Panels:
     An Experimental and Analytical Study
986. Loporcaro Giuseppe, Scott Allan, Clucas Don, Palermo Alessandro et al. (2024-11)
     Sustainable Resilience for 3D Concrete Printed Homes in New Zealand:
     A Three Years Research Government Funding Overview
987. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-11)
     The Contribution of 3D Printed Lost Formworks to the Compressive Capacity of Structural Columns
988. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
     Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
989. Reddy Swami, Shariff Najeeb, Nanthagopalan Prakash (2024-11)
     Topology-Optimization of 3D Concrete Printed Columns Considering Material-Anisotropy
990. Prasittisopin Lapyote (2024-11)
     How 3D Printing Technology Makes Cities Smarter:
     A Review, Thematic Analysis, and Perspectives
991. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
     Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
992. Takva Çağatay, Top Semahat, Gökgöz Berru, Gebel Şeyma et al. (2024-11)
     Applicability of 3D Concrete Printing Technology in Building Construction with Different Architectural Design Decisions in Housing
993. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
     Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
994. Najvani Mohammad, Murcia Daniel, Taha Mahmoud (2024-11)
     Evolution of Early-Age Mechanical and Failure Behavior of 3D Printed Polymer Concrete
995. Kaszyńska Maria, Skibicki Szymon (2024-11)
     Sustainable Development Approach for 3D Concrete Printing
996. Lucas Sandra (2024-11)
     From 3D to 5D Printing:
     Additive Manufacturing of Functional Construction Materials
997. Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
     Additive Energy:
     3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
998. Jesus Manuel, Ribeiro Elis, Teixeira João, Rangel Bárbara et al. (2024-11)
     3D Printed Mortars with Marble-Powder Towards Sustainable Construction
999. Mousavi Seyed, Ahmadi Khatereh, Dehestani Mehdi (2024-11)
     Fire Response of 3D Printed Concrete
1000. Hassan Zohaib, Raza Saim, Shafei Behrouz, Mahoutian Mehrdad et al. (2024-11)
      Innovations to Improve 3D Concrete Printing of Portland Cement-Steel-Slag Blended Mortars
1001. Raza Saim, Sakha Mahsa, Manshadi Behzad, Fan Haifeng et al. (2024-11)
      Digital Fabrication of Ribbed Slabs with Post-Tensioned 3D Printed Concrete Formwork
1002. Loaiza Sebastián, Ortiz Albert, Gómez Daniel, García Alvarez José et al. (2024-11)
      3D Printing Applied to Building Development Around the World:
      A Systematic Literature Review
1003. Murali Gunasekaran, Leong Sing (2024-11)
      Waste-Driven Construction:
      A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development
1004. Wu Xikai, Shi Qingxuan, Huo Jian, Zhao Yu et al. (2024-11)
      Experimental Study on Buildability and Mechanical Properties of 3D Printing Cob
1005. Li L., Fang Z., Chu S., Kwan Albert (2024-11)
      Improving Mechanical Properties of 3D Printed Mortar by Exploiting Synergistic Effects of Fly-Ash-Microsphere and Nano-Silica
1006. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
      3D Printing of a Multi-Performative Building Envelope:
      Assessment of Air-Permeability, Water-Tightness, Wind-Loads, and Impact-Resistance
1007. Motamedi Mahan, Mesnil Romain, Tang Anh-Minh, Pereira Jean-Michel et al. (2024-11)
      Structural Build-Up of 3D Printed Earth by Drying
1008. Vlieger Jentel, Cizer Özlem, Lesage Karel, Desplentere Frederik et al. (2024-11)
      Rheological- and Pumpability-Analysis of Sustainable 3D Printing Mortars Incorporating Recycled Sand
1009. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
      Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate
1010. Sreenivas Gagan, Rizzieri Giacomo, Bhattacherjee Shantanu, Jain Smrati et al. (2024-11)
      Experimental and Numerical Assessment of Layer Deformation in a 3D Printed Concrete Element
1011. Arif Muhammad, Jan Faizullah, Rezzoug Aïssa, Afridi Muhammad et al. (2024-11)
      Data-Driven Models for Predicting Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Interpretable Machine Learning Algorithms
1012. Nathansohn Nof, Gillis Elisheva, Linker Gitit, Zermati Noa et al. (2024-11)
      To Grow a Building:
      Soil and Seeds 3D Printing
1013. Csótár Hanna, Baranyai Gusztáv, Szalai Szabolcs, Fischer Szabolcs (2024-11)
      Sustainable Uses of 3D Printing Applied to Concrete Structures
1014. Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
      Towards Adaptive Additive Manufacturing:
      Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
1015. Khan Muhammad, Varadharajan Tharanesh, Keller Zachary, Meibodi Mania (2024-11)
      BioMatters:
      The Robotic 3D-Printed Biodegradable Wood-Based Formwork for Cast-in-Place Concrete Structures
1016. Anton Ana-Maria, Skevaki Eleni, Bischof Patrick, Reiter Lex et al. (2024-11)
      Column-Slab Interfaces for 3D Concrete Printing:
      Design, Fabrication and Assembly Strategies
1017. Liu Bing, Guo Yazhao, Wang Yang, Liu Qizhou et al. (2024-11)
      Study on the Compression Performance of 3D Printing Concrete Permanent Formwork Composite Columns
1018. Zhi Zhenzhen, Guo Yanfei, Qi Huahui, Tan Hongbo et al. (2024-11)
      Effect of Alkali-Metal-Sulfates on Hydration Properties of Alpha-Calcium-Sulfate-Hemihydrate for 3D Printing
1019. Shahzad Qamar, Li Fangyuan (2024-11)
      Assessing the Load-Bearing Capacity of 3D Printed Concrete at Early-Ages:
      An Innovative Approach
1020. Skibicki Szymon, Dvořák Richard, Pazdera Luboš, Topolář Libor et al. (2024-11)
      Anisotropic Mechanical Properties of 3D Printed Mortar Determined by Standard Flexural and Compression-Test and Acoustic Emission
1021. Lin Manfang, Li Lingzhi, Jiang Fangming, Ding Yao et al. (2024-11)
      Automated Reinforcement of 3D Printed Engineered Cementitious Composite Beams
1022. Nienaber Linda, Kanyenze Simba, Combrinck Riaan (2024-11)
      Water Absorption Reduction of 3D Printed Concrete Using Silicones
1023. Nashed Kabalan Ola, Ciblac Thierry, Marceau Sandrine, Roy Robert (2024-11)
      Advancing Raw Earth Reinforcement for 3D Printed Architecture:
      Durability-Assessment
1024. Zhao Herui, Jiang Quan, Xia Yong, Liu Jian et al. (2024-11)
      Microbial-Induced Carbonate Reinforcement for 3D Printed Concrete:
      Testing in Printable and Mechanical Strength
1025. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
      Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder
1026. Sousa Israel, Alessandro Antonella, Mesquita Esequiel, Laflamme Simon et al. (2024-11)
      Comprehensive Review of 3D Printed Cementitious Composites with Carbon Inclusions:
      Current Status and Perspective for Self-Sensing Capabilities
1027. Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
      Multi-Model-Based Additive Manufacturing:
      A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots
1028. Zeng Jun-Jie, Hu Xianwen, Sun Hou-Qi, Liu Yue et al. (2024-10)
      Triaxial Compressive Behavior of 3D Printed PE-Fiber-Reinforced Ultra-High-Performance Concrete
1029. Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
      Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis
1030. Liu Bing, Cheng Xiao-Ming, Wang Lian-Gang, Qian Kai (2024-10)
      Compressive Performance of PVA Fiber-Reinforced 3D Concrete Printing Permanent Formwork Composite Columns Reinforced with BFRP-Bars
1031. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2024-10)
      Sustainable Structures Unveiled:
      Navigating the Environmental Landscape of 3D Printing in Construction
1032. Eid Zainab, Almerbati Nehal (2024-10)
      Methodologies to Assess the Environmental Impact of 3D Printed Buildings Using Construction Waste
1033. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-10)
      Geopolymer Composites for 3D Printing Applications:
      A Statistical Analysis Approach
1034. Placzek Gerrit, Schwerdtner Patrick (2024-10)
      A Global Snapshot of 3D Printed Buildings:
      Uncovering Robotic-Oriented Fabrication-Strategies
1035. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
      Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
1036. Adamtsevich Liubov, Pustovgar Andrey, Adamtsevich Aleksey (2024-10)
      Assessing the Prospects and Risks of Delivering Sustainable Urban Development Through 3D Concrete Printing Implementation
1037. Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
      Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
      Implications for Standardization in Additive Construction
1038. Bang Jin, Yim Hong (2024-10)
      Unbonded Inter-Layer Evaluation in Freshly 3D Printed Concrete Using Electrical Resistivity Measurements
1039. Li Zhengrong, Xing Wenjing, Wang Heyu, Sun Jingting (2024-10)
      The Effect of Heterogeneous Geometry on Steady-State Heat Transfer in Extrusion-Based 3D Printed Structures
1040. Nakanishi Reina, Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki et al. (2024-10)
      Design and Development of a Shape Measurement System for 3D Construction Printing with a Manipulator
1041. Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-10)
      Material-Saving Concrete Ceiling Made from 3D-Printed Interlocking Blocks
1042. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
      Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
      Shear Properties and Enhancement Methods
1043. Yu Ke-Ke, Zhao Tai-Qi, Lou Qi-Ling, Ping Yang (2024-10)
      Recycled PET Fibers with Dopamine Surface Modification for Enhanced Inter-Layer Adhesion in 3D Printed Concrete
1044. Raza Saim, Manshadi Behzad, Sakha Mahsa, Widmann Robert et al. (2024-10)
      Load Transfer Behavior of 3D Printed Concrete Formwork for Ribbed Slabs Under Eccentric Axial Loads
1045. Lin Yini, Yan Jiachuan, Sun Ming, Han Xiaoyu et al. (2024-10)
      Inter-Layer Cohesion in 3D Printed Concrete:
      The Role of Width-to-Height-Ratio in Modulating Transport Properties and Pore-Structure
1046. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
      Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
      Rheological Regulation and Fiber Hybridization
1047. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
      Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
1048. Peng Chengming, Yang Zhenjun, Li Hui (2024-10)
      A Predictive Model for Interlayer-Water-Evolution and Experimental Validation of 3D Printed Cementitious Materials
1049. Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
      Micro/Nano Additives in 3D Printing Concrete:
      Opportunities, Challenges, and Potential Outlook in Construction Applications
1050. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
      Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
1051. Cai Jianguo, Wang Jingsong, Zhang Qian, Du Caixia et al. (2024-10)
      State of the Art of Mechanical Properties of 3D Printed Concrete
1052. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
      Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
      Hydration, Shrinkage and Early-Age Performance
1053. Rodriguez Fabian, Moini Mohamadreza, Agrawal Shubham, Williams Christopher et al. (2024-10)
      Mechanical Response of Small-Scale 3D Printed Steel-Mortar Composite Beams
1054. Bao Ta, Yeakleang Muy, Abdelouhab Sandra, Courard Luc (2024-10)
      Testing Mortars for 3D Printing:
      Correlation with Rheological Behavior
1055. An Ning, Wang Huai, Le Liu, Li Shuo et al. (2024-10)
      Real-Time Monitoring of Extrudability and Buildability in 3D Concrete Printing Based on Target Detection Method
1056. Hoang Pham, Moon Hyosoo, Ahn Yonghan (2024-10)
      Optimizing 3D Printed Concrete Mixtures for Extraterrestrial Habitats:
      A Machine Learning Framework
1057. Gholami Shayan, Kim Yong-Rak, Salehi Faezeh (2024-10)
      Strengthening and 3D Printing of Magnesium-Silicate-Hydrate Binder for Martian Construction
1058. Tabassum Nusrat, Duarte José (2024-10)
      Exploring Multi-Directional 3D Printing for Enclosures on Earth and Beyond:
      Sensitivity-Analysis of Buildability
1059. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
      Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
1060. Oliveira Francisco, Picelli Sanches Renato, Nelli Silva Emílio, Barari Ahmad et al. (2024-10)
      Topology-Optimization in 3D Concrete Printing to Reduce Greenhouse Gas Emissions
1061. Du Guoqiang, Qian Ye (2024-10)
      Bio-Inspired Innovations in 3D Concrete Printing:
      Structures, Materials and Applications
1062. Placzek Gerrit, Schwerdtner Patrick (2024-10)
      Comparison of Machine- and Performance Specifications of Concrete 3D Printers
1063. Du Guoqiang, Qian Ye (2024-10)
      Bio-Inspired 3D Printing of Strain-Hardening Cementitious Composites Reticulated Shell-Roofs
1064. Sahai Rajan, Bisht Ravindra, Kumar Shivam, Singh Siddharth et al. (2024-10)
      Modeling and Simulation of 3D Printed Concrete Layers and Validation Using Gantry Robotic Printer
1065. Li Shuai, Lan Tian, Nguyen Hung-Xuan, Tran Jonathan (2024-10)
      Frontiers in Construction 3D Printing:
      Self-Monitoring, Multi-Robot, Drone-Assisted Processes
1066. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
      Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
      Sorption and Microstructural Perspective
1067. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
      Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
1068. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
      Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
1069. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
      3D Printed Concrete Incorporating Waste-Rubber:
      Anisotropic Properties and Environmental Impact-Analysis
1070. Gyawali Biva, Haghnazar Ramtin, Akula Pavan, Alba Kamran et al. (2024-10)
      A Review on 3D Printing with Clay and Sawdust/Natural Fibers:
      Printability, Rheology, Properties, and Applications
1071. Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
      Preparation of 3D Printed Concrete from Solid Waste:
      Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
1072. Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
      An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers
1073. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
      Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
1074. Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
      3D Constructing:
      Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation
1075. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-10)
      Influence of Printing-Parameters on the Durability of 3D Printed Limestone-Calcined-Clay-Cement Mortar:
      Overlap Between Filaments and Nozzle-Offset
1076. Chen Yuning, Xia Kailun, Dong Enlai, Cao Ruilin et al. (2024-10)
      A Mechanical Characteristic Capture-Method Considering Printing-Configurations for Buildability-Modeling in Concrete 3D Printing
1077. Markin Slava, Cordova Julian, Combrinck Riaan, Mechtcherine Viktor (2024-09)
      Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage
1078. Carcassi Olga, Akemah Tashania, Alon Lola (2024-09)
      3D Printed Lightweight Earth Fiber:
      From Tiles to Tessellations
1079. Shen Kaige, Ding Tao, Cai Chen, Xiao Jianzhuang et al. (2024-09)
      Feasibility-Analysis of 3D Printed Concrete with Sludge-Incineration-Slag:
      Mechanical Properties and Environmental Impacts
1080. Subramaniam Kolluru, Paritala Spandana, Kulkarni Omkar, Thakur Manideep (2024-09)
      Fracture in 3D Printed Concrete Beams:
      Deflection and Penetration of Impinging Cracks at Layer Interfaces
1081. Chen Baixi, Qian Xiaoping (2024-09)
      Data-Driven Reliability-Oriented Buildability-Analysis of 3D Concrete Printed Curved Wall
1082. Ma Wei, Wang Guosheng, Zhou Yaya, Xu Qinghu et al. (2024-09)
      Polyacrylonitrile-Fiber-Reinforced 3D Printed Concrete:
      Effects of Fiber Length and Content
1083. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
      Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
1084. Tang Hong, Xiong Shiqi (2024-09)
      Comparative Analysis of Carbon-Emission Accounting and Carbon-Reduction-Effect of 3D Printed Concrete Structures at the Stage of Architecturalization
1085. Liu Xuelin, Sheng Haitao, Feng Binqing, Wang Liang et al. (2024-09)
      Development of Novel Alkaline-Electrolyzed-Water on the Properties of 3D Printed Calcium-Sulphoaluminate-Cement Composites
1086. Schweizer Katie, Bhandari Sunil, Lopez-Anido Roberto, Korey Matthew et al. (2024-09)
      Recycling Large-Format 3D Printed Polymer Composite Formworks Used for Casting Pre-Cast Concrete:
      Technical Feasibility and Challenges
1087. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2024-09)
      Data-Driven Design-Process and Production of Stress-Optimized Concrete Girders with Integrated Tendons Using 3D Printing
1088. Shahib Al Bari M., Ekaputri Januarti (2024-09)
      The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete
1089. Liu Chao, Banthia Nemkumar, Shi Yifan, Jia Zijian et al. (2024-09)
      Early-Age Shrinkage Mitigation and Quantitative Study on Water Loss Kinetics of 3D Printed Foam-Concrete Modified with Superabsorbent Polymers
1090. Maury-Ramírez Aníbal, Rinke Mario, Blom Johan (2024-09)
      Low-Carbon Embodied, Self-Cleaning, and Air-Purifying Building Envelope Components Using TiO2 Photocatalysis, 3D Printing, and Recycling
1091. Shivendra Bandoorvaragerahalli, Sharath Chandra Sathvik, Singh Atul, Kumar Rakesh et al. (2024-09)
      A Path Towards SDGs:
      Investigation of the Challenges in Adopting 3D Concrete Printing in India
1092. Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
      A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam
1093. Tran Nhi, Tran Mien, Tran Jonathan, Nguyen Anh et al. (2024-09)
      Eco-Friendly 3D Printed Concrete Using Steel-Slag-Aggregate:
      Buildability, Printability and Mechanical Properties
1094. Aldabergenova Gaziza, Jexembayeva Assel, Konkanov Marat, Kirgizbayev Akpan et al. (2024-09)
      The Efficient Waste-Based Fine-Grained Fiber Concretes for 3D Printing
1095. Jin Willy, Roux Charlotte, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
      Life Cycle Assessment of Limestone-Calcined-Clay-Concrete:
      Potential for Low-Carbon 3D Printing
1096. Curth Alexander, Pearl Natalie, Wissemann Emily, Cousin Tim et al. (2024-09)
      EarthWorks:
      Zero-Waste 3D Printed Earthen Formwork for Shape-Optimized, Reinforced Concrete Construction
1097. Chen Baixi, Zhao Xueqi, Qian Xiaoping (2024-09)
      Voxel-Based Path-Driven 3D Concrete Printing Process Simulation Framework Embedding Inter-Layer Behavior
1098. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
      Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
      Experimental and Numerical Analysis
1099. Kamhawi Abdallah, Meibodi Mania (2024-09)
      Techniques and Strategies in Extrusion-Based 3D Concrete Printing of Complex Components to Prevent Premature Failure
1100. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Valenzuela-Astudillo Eduardo, Martuffi-Lazo Daniela et al. (2024-09)
      Development of a Generative Design System for 3D Printed Houses in Chile
1101. Edmund Dineth, Zahra Tatheer, Asad Mohammad, Thamboo Julian (2024-09)
      Experimental Investigation on Tensile-Characteristics of 3D Printed Auxetic-Embedded Cementitious Composites and Shear-Bonding Behavior to Masonry
1102. Lim Sean, Tay Yi, Paul Suvash, Lee Junghyun et al. (2024-09)
      Carbon Capture and Sequestration with In-Situ CO2 and Steam Integrated 3D Concrete Printing
1103. Dulaj Albanela, Peeters Sef, Poorsolhjouy Payam, Salet Theo et al. (2024-09)
      Combined Analytical and Numerical Modelling of the Electrical Conductivity of 3D Printed Carbon-Nano-Tube-Cementitious-Nano-Composites
1104. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2024-09)
      Evaluation of Basalt-Fibers and Nano-Clays to Enhance Extrudability and Buildability of 3D Printing Mortars
1105. Chajec Adrian, Šavija Branko (2024-09)
      The Effect of Using Surface Functionalized Granite-Powder-Waste on Fresh Properties of 3D Printed Cementitious Composites
1106. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
      Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
1107. Dörfler Kathrin, Dielemans Gido, Leutenegger Stefan, Jenny Ercan et al. (2024-09)
      Advancing Construction in Existing Contexts:
      Prospects and Barriers of 3D Printing with Mobile Robots for Building Maintenance and Repair
1108. Han Kang, Gu Fei, Yang Huashan, Tian Xinchen et al. (2024-09)
      PVA-Fiber-Reinforced Red Mud-Based Geopolymer for 3D Printing:
      Printability, Mechanical Properties and Microanalysis
1109. Andreou Vasilis, Kontovourkis Odysseas (2024-09)
      Formwork-Optimization for Complex 3D Concrete Printing:
      A Unified Theoretical, Digital, and Experimental Framework
1110. Brodmann Anton, Damtsas Efstathios, Schult Christoph, Spaeth Benjamin et al. (2024-09)
      DesignBuild Project of a 3D Printed Concrete Shell with a Segmented and Stereotomic Construction Concept
1111. Licen Jurij, Chen Taole (2024-09)
      Use of Genetic Optimization-Algorithms in the Design of 3D Concrete Printed Shell-Structures
1112. Dounas Theodoros, Berdos Yorgos, Vele Jiří (2024-09)
      Towards a Decentralized Physical Infrastructure for Additive Manufacturing in Architecture:
      A Proof of Concept for a Tamper Proof, Secure Connection Between Designs, Blockchains and 3D Printers
1113. Vele Jiří, Melter Oto, Hvizdal Ales, Achten Henri et al. (2024-09)
      Enhancing 3D Concrete Printing Buildability with Non-Planar Layering:
      A Case Study
1114. Vele Jiří, Prokop Simon, Ciganik Ondrej, Kurilla Lukáš et al. (2024-09)
      Non-Planar 3D Printing of Clay Columns:
      A Method for Improving Stability and Performance
1115. Srinivas Dodda, Boddepalli Uday, Dey Dhrutiman, Choaudhary Bhavesh et al. (2024-09)
      Development of Outdoor Furniture Using 3D Concrete Printing
1116. Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
      A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces
1117. Wolfs Robert (2024-09)
      The Status Quo of 3D Concrete Printing:
      Are We There Yet?
1118. Walzer Alexander, Kozlova Mariia, Yeomans Julian (2024-09)
      Printing Homes:
      Unit Cost Estimation for Additive Manufacturing in Construction
1119. Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
      Additive Manufacturing by the Selective Paste-Intrusion:
      Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
1120. He Lewei, Pan Jiahui, Hee Yu, Chen Hao et al. (2024-09)
      Development of Novel Concave and Convex Trowels for Higher Inter-Layer Strength of 3D Printed Cement-Paste
1121. Neef Tobias, Mechtcherine Viktor (2024-09)
      Continuous Fiber-Reinforcement for Extrusion-Based 3D Concrete Printing
1122. Ivaniuk Egor, Mechtcherine Viktor (2024-09)
      A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites
1123. Ogura Hiroki, Hara Koichiro, Yamamoto Shinya, Abe Hiroyuki (2024-09)
      Flexural Performance of Fiber-Reinforced 3D Printed Concrete Beams with Axial Rebar
1124. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
      Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
1125. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
      Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
1126. Tarhan Yeşim, Tarhan İsmail, Jacquet Yohan, Perrot Arnaud (2024-09)
      Mechanical Behavior of 3D Printed and Textile-Reinforced Eco-Friendly Composites
1127. Nikravan Ata, Aydin Tolga, Özyurt Nilüfer, Bundur Zeynep (2024-09)
      Enhancing the Performance of 3D Printed Fiber-Reinforced Mortar:
      Synergistic Effects of Clays and Bacterial Cells as Viscosity-Modifying-Agents
1128. Ma Xin-Rui, Wang Xian-Lin, Chen Shi-Zi (2024-09)
      Trustworthy Machine Learning-Enhanced 3D Concrete Printing:
      Predicting Bond Strength and Designing Reinforcement Embedment Length
1129. Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
      3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
      Mechanical and Acoustic Insulation Properties
1130. Liu Xiaoshuang, Li Shiming, Duan Yanjun, Du Zhiqin et al. (2024-09)
      Influence of Printing Interval on the Imbibition Behavior of 3D Printed Foam-Concrete for Sustainable and Green Building Applications
1131. Lee Jae, Park Boo (2024-09)
      A Study on Eco-Friendly Materials for 3D Printing:
      Focused on Korean Hwangto(Loess)
1132. Gürsoy Benay (2024-09)
      From Control to Uncertainty in 3D Printing with Clay
1133. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
      Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
1134. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
      Flexural Strength of 3D Printed Concrete Beams:
      Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
1135. Harbouz Ilhame, Alam Syed, Loukili Ahmed (2024-09)
      Influence of Printing Parameters on Early-Age Shrinkage in 3D Printed Mortar
1136. Kamhawi Abdallah, Brown Jacob, Fahmy Ali, Meibodi Mania (2024-09)
      Waste-Free Production of Ultra-Thin Concrete Panels via Robotic 3D Printing and CNC Dynamic Bed Device
1137. Padilla-Encinas Pilar, Fernández Raúl, Cuevas Jaime, Marieta Cristina et al. (2024-09)
      Low-Carbon Footprint Magnesium-Phosphate-Cement for 3D Concrete Printing
1138. Yang Min, Yao Xiaofei, Zhao Liguo, Zhang Yamei et al. (2024-09)
      Bridging Ancient Artistry and Modern Engineering:
      A 3D Printed Concrete Arch Bridge Inspired by Millennium-Old Bronze Patterns Using an Integrated Concrete 3D Printing System
1139. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2024-09)
      Zone-Based Analysis of Layer Deformation in 3D Concrete Printing:
      Shoulder, Steady-State, and Foot Zones
1140. Tanaka Shunsei, Usui Tatsuya, Koga Yoshitaka, Miyamoto Shingo et al. (2024-09)
      Experimental Study of Tunnel Invert Construction Using 3D Concrete Printing
1141. Rider Bo, Kurtis K., Stewart L. (2024-09)
      Quantification of Porosity and Sorptivity in Fiber-Reinforced 3D Printed Mortar:
      Connecting Material-Composition and Structural Performance
1142. Mahdy Deena, Abdelrahim Marwa, Alatassi Adel (2024-09)
      Assessment of Air-Flow Performance Through Openings in 3D Printed Earthen Structure Using CFD Analysis
1143. Yoshihara Rei, Hashimoto Katsufumi, Sugiyama Takafumi, Nakase Kota (2024-09)
      Development and Validation of Finite-Element-Constitutive-Model for Meso-Scale Compressive Fracture Behavior of 3D Printed Mortar
1144. Jongvisuttisun Passarin, Chaiyapoom Phattarakamon, Jiramarootapong Patiphat, Meemuk Kornravee et al. (2024-09)
      The Second 3D Printed Prefabricated Prefinished Volumetric Construction Building in Thailand:
      A New Sustainable and Efficient Approach for a Low-Rise Prefab Modular Building
1145. Nana W., Baz Bilal, Blachier Christian, Peraud Mickaël et al. (2024-09)
      Mechanical Performance of 3D Printed Fiber-Reinforced Concrete
1146. Denis L., Omikrine-Metalssi O., Karam-Cabrerizo R., Barnes-Davin L. et al. (2024-09)
      Impact of Very Early-Age Drying on Printed Concrete Microstructures
1147. Zhang Yi, Tittelboom Kim, Tao Yaxin, Zhang Yiyuan et al. (2024-09)
      Understanding Carbonation in 3D Printed Cement-Based Materials with Exposed Bottom Surface
1148. Marchment Taylor (2024-09)
      Concrete 3D Printed Marine Wind, Solar and Energy Storage Support Structures
1149. Farra Ramzi, Mazanec Oliver, Ducoulombier Nicolas, Mallet Alban (2024-09)
      Toward the Optimal Use of Local Cementitious Materials Through Novel Admixture-Technology and a Dedicated 2K-Printing-System
1150. Osta Mohammad, Mukhtar Faisal (2024-09)
      Buildability-Analysis of 3D Concrete Printing Using Finite-Element-Method
1151. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2024-09)
      Multi-Physics Modelling for Extrusion-Based 3D Printing:
      Material, Process and Applications
1152. Remke Sebastian, Kandy Sharu, Sant Gaurav, Gädt Torben (2024-09)
      A Hybrid Binder Concept for a Swift Liquid-to-Solid Transition in 3D Printing of Suspensions
1153. Sikora Paweł, Federowicz Karol, Techman Mateusz, Skibicki Szymon (2024-09)
      Fine Recycled Concrete Aggregates in 3D Printed Concrete
1154. Ivaniuk Egor, Reißig Silvia, Mechtcherine Viktor (2024-09)
      Automating Penetration Tests for Fresh 3D Printed Cementitious Materials
1155. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Butler Marko et al. (2024-09)
      Integration of Steel Reinforcement into Extrusion-Based 3D Concrete Printing of Monolithic Concrete Elements
1156. Song Xinlei, Sun Xiaoyan, Wang Hailong (2024-09)
      Determination of Optimal Flowability of 3D Printing Concrete Based on Multi-Objective Optimization Method
1157. Jipa Mihail-Andrei, Anton Ana-Maria, Gebhard Lukas, Dillenburger Benjamin (2024-09)
      The Nubian Slab:
      3D Concrete Printed Stay-in-Place Formwork for Vaulted Slabs
1158. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-09)
      Active Rheology-Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing
1159. Corfe Ian (2024-09)
      A Digital Library for Using Mine-Tailings in Low-Carbon Concrete Replacements for Mine Back-Filling & 3D Printing
1160. Farhan Abdul, Xu Jie, Dobrzanski James, Kolawole John et al. (2024-09)
      Quantifying 3D Concrete Printing Production Waste
1161. Asensio Eloy, Fenàndez F., Cabello Z., Álvarez O. et al. (2024-09)
      Low-Clinker ECC Materials Using Biomass Ash for 3D Printing
1162. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
      Durability of 3D Printed Concrete:
      Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
1163. Šahmenko Genādijs, Šinka Māris, Bumanis Girts, Sapata Alise et al. (2024-09)
      Ternary Gypsum-Cement-Pozzolan Composites for 3D Printing with Reduced Environmental Impact
1164. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2024-09)
      Real-Time Monitoring and Feedback Operation System for 3D Printed Concrete Based on Computer-Vision
1165. Haripan Vislavath, Senthilnathan Shanmugaraj, Gettu Ravindra, Santhanam Manu et al. (2024-09)
      Open-Time and Extrudability-Performance-Analysis of 3D Printed Concrete with Recycled Concrete Fine Aggregates Using Rheological- and Computer-Vision-Techniques
1166. Giulivo Marco, Menna Costantino, Capozzi Vittorio, Asprone Domenico (2024-09)
      Experimental Behavior of a 3D Printed Concrete Wall with Fixed Base Anchorage Subjected to In-Plane Cyclic Loads
1167. Ahmed Ahmed, Rosa Raul, Gomaa Shady, Irizarry Elmer et al. (2024-09)
      Rheological Characterization of Nano-Modified Ultra-High-Performance Concrete for 3D Printing
1168. Monkman Sean, Hernandez Margarita, Moreno Daniel (2024-09)
      A Case Study in Industrialized 3D Printing:
      A One Hundred Home Community Near Austin, Texas
1169. Dias José, Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2024-09)
      The Potential of Natural Fiber-Reinforcement in 3D Printed Concrete:
      A Review
1170. Dey Dhrutiman, Panda Biranchi (2024-09)
      Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
1171. Valera Hugo, Pimentel Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-09)
      Rheological and 3D Printing-Assessment of Sisal-Fiber Mortar for Architectural Applications
1172. Wolf Christoph, Robens-Radermacher Annika, Unger Jörg (2024-09)
      Optimization Framework for Large-Scale Powder-Bed 3D Printed Concrete Structures Under Various Constraints
1173. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
      Advancements in Sustainability of 3D Concrete Printing:
      Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
1174. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-09)
      Experimental Setup for Shear and Inter-Layer Bonding in a 3D Printed Concrete Framework
1175. Sovetova Meruyert, Calautit John (2024-09)
      Effect of the Printing Process on Thermal Performance of 3D Printed Structures
1176. Noaimat Yazeed, Ghaffar Seyed (2024-09)
      Exploring Low-Carbon Cementitious Materials for 3D Printing Applications:
      A Comparison Between Limestone-Calcined-Clay-Cement and One-Part Alkai-Activated Material
1177. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
      Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
      A Numerical Study
1178. Gill Connor, Justham Laura, Lohse Niels, Haynes Adam et al. (2024-09)
      Measurement and Control of Serial Manipulator Robots for 3D Concrete Printing
1179. Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
      Determination of Print Speed Based on the Fresh Mechanical Strength over Time of Additively Constructed Concrete by Unconfined Compression
1180. Walzer Alexander, Kozlova Mariia, Mohite Ashish, Yeomans Julian (2024-09)
      Improving a 3D Concrete Printing Factory Using Stochastic Modelling for Decision-Support
1181. Meibodi Mania, Lin Yuxin, Chen Hao (2024-09)
      Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures
1182. Zhang Sisi, Claßen Martin, Olesch Mirco, Mäde Konrad et al. (2024-09)
      Prototypical Realization of Fully Automated 3D Printing of Reinforced Concrete Using AMoRC Method
1183. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
      Nozzle-Integrated Slump-Scanner-Test:
      Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
1184. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
      Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
      Strategies for Rheology Adjustment and Mechanical Performance Estimation
1185. Auer Daniel, Bos Freek, Fischer Oliver (2024-09)
      3DCP.fyi:
      A Comprehensive Citation Network Graph on the State of the Art in 3D Concrete Printing
1186. Lehr Leonard, Pfeiffer Sven, Rasanani Mahdieh, Stephan Dietmar et al. (2024-09)
      3D Light on Site:
      Bringing Concrete Print to the Construction Site
1187. Szögi Tamás, Kapitány Kristóf, Sólyom Sándor (2024-09)
      Characterization of 3D Concrete Printed Horizontal Structures Through Early-Age Deformation-Analysis
1188. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
      Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
1189. Lin Xiqiang, Huo Liang, Li Guoyou, Wang Hailong et al. (2024-09)
      On-Site Deployment of 3D Construction Printing for the Building a Two-Story Building in China
1190. Hüsken Götz, Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph (2024-09)
      An Assessment of the Repeatability of 3D Printed Concrete Structures
1191. Dörrie Robin, Kloft Harald, Sawicki Bartłomiej, Freund Niklas et al. (2024-09)
      Automated Reinforcement Integration in Shotcrete 3D Printing Through Green State Milling
1192. Aouichat Belkis, Hosseinpoor Masoud, Yahia Ammar, Dupuis Mario (2024-09)
      How Can Nanocellulose Contribute to Enhance the Performance of Concrete 3D Printing?
1193. Schmid Robert, Gierlinger David, Hansemann Georg, Trummer Andreas et al. (2024-09)
      Filigree Façade Panels Fabricated by 3D Concrete Printing
1194. Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
      Instrumentation of the Extruder Nozzle Using Load Cells:
      Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials
1195. Rudolph Jennifer, Lowke Dirk (2024-09)
      Design and Characterisation of a Two-Component Mortar-System for Shotcrete 3D Printing:
      An Approach to the Targeted Control of Material-Properties
1196. Tomolt Laura, Meggers Forrest, Moini Mohamadreza (2024-09)
      3D Printing Channel Networks with Cement-Paste
1197. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-09)
      Exploring the Impact of the Pumping Process on the Structural Build-Up in the Context of 3D Concrete Printing
1198. Hlaváček Petr, Wolf Christoph, Robens-Radermacher Annika, Kühne Hans-Carsten (2024-09)
      Powder-Bed 3D Printing of Cementitious Materials for Lightweight Construction Elements
1199. Keita Emmanuel, Zuo Wenqiang, Caneda-Martínez Laura, Aimedieu Patrick et al. (2024-09)
      X-Ray Tomography Insights into Early Drying Effects in 3D Concrete Printing
1200. Nakase Kota, Hashimoto Katsufumi, Sugiyama Kentaro, Mori Hiroaki et al. (2024-09)
      Effect of Printing Parameters on Print Quality and Fracture Propagation Behavior of 3D Printed Concrete
1201. Zargayouna Habib, Paquet Elodie, Mabrouki Tarek, Hamdi Essaieb et al. (2024-09)
      Analysis of the Effect of Substituting Cement with Marble-Powder on the Mortar Characteristics Used in 3D Printing
1202. Qian Shunzhi, Zhao Huanyu, Meng Dan (2024-09)
      Numerical Study of Concrete Beams with 3D Printed Strain-Hardening Cementitious Composites (SHCC)
1203. Obermeier Nico, Brunner Kim, Wiese Felix, Stengel Thorsten (2024-09)
      Development of Low-Cement Lightweight Concrete Mixes for 3D Extrusion Printing
1204. Shen Wenbin, Wang Hailong, Sun Xiaoyan (2024-09)
      Influence of Coarse Aggregates on the Performance of 3D Printing Concrete
1205. Zat Tuani, Schmitt Duarte Ester, Webber Jaine, Matos Paulo et al. (2024-09)
      Comparison Between Yield-Stress-Measurements for Fiber-Reinforced 3D Concrete Printing
1206. Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
      Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
      Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates
1207. Kondepudi Kala, Gomzyakov Albert, Liebscher Marco, Mechtcherine Viktor (2024-09)
      3D Printing by Selective Activation of Geopolymer-Based Binders
1208. Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2024-09)
      Comparative Study into the Inter-Layer Bond Strength of 3D Printed Mortar:
      Underwater vs. Air Environments
1209. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2024-09)
      Challenging the Limits of Fluid FEM Modelling in 3D Concrete Printing
1210. Mostert Jean-Pierre, Kruger Jacques (2024-09)
      Improving Durability Performance of 3D Printed Concrete via Topological Interlocking of Layers
1211. Ojeda Juan, Grebner Philipp, Knaack Ulrich, Rosendahl Philipp (2024-09)
      3D Printing with WAAM to Form and Stiffen Lightweight Steel Panels for Freeform Façades
1212. Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
      Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry
1213. Nana W., Dell’Endice Alessandro, Bhooshan Vishu, Zhou Fulei et al. (2024-09)
      Decarbonizing Concrete Construction:
      Case of the Phoenix 3D Printed Footbridge and Learnings for Engineering and Architecture
1214. Daadouch Koussay, Reinold Janis, Meschke Günther (2024-09)
      Numerical Simulation of 3D Concrete Printing:
      From the Layer- to the Structural-Scale
1215. Sokolov Dmitrii, Mechtcherine Viktor (2024-09)
      3D Vision in 3D Concrete Printing
1216. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2024-09)
      Correlation of Continuously Measured In-Line Process Parameters and Extruded Geometry in 3D Concrete Printing Experiments
1217. Vasilić Ksenija, Udayakumar Raja, Böhler David, Mai (née Dressler) Inka et al. (2024-09)
      A Numerical Model for Simulating Particle-Bed 3D Printing
1218. Mawas Karam, Maboudi Mehdi, Achanccaray Pedro, Gerke Markus (2024-09)
      Filament Extraction for 3D Printing
1219. Soto Alejandro, Gebhard Lukas, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-09)
      Structural Testing Campaign for a 30 m Tall 3D Printed Concrete Tower
1220. Böhler David, Mai (née Dressler) Inka, Lowke Dirk (2024-09)
      Durability of 3D Printed Concrete:
      A Comparison of Extrusion 3D Printing, Shotcrete 3D Printing and Conventional Casting
1221. Schönsee Eric, Jeyifous Olubunmi, Strangfeld Christoph, Hüsken Götz (2024-09)
      Investigations on Multi-Sensor Data for Monitoring Volume Flow During the Printing Process
1222. Cutajar Sacha, Quadranti Elia, Lloret-Fritschi Ena (2024-09)
      3D Printed Earth Formworks for Concrete:
      Exploring Fabrication Feasibility for Complex Filler Slabs
1223. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
      Characterisation of the Rheological Behavior of a Resource-Saving Sustainable Concrete in the Context of 3D Printing
1224. Joon Hillar, Peetrimägi Lauri (2024-09)
      Influence of Illitic Calcined Clay on Properties of Mixtures for 3D Concrete Printing
1225. Hage Ali, Paquet Elodie, Leklou Ali, Neu Thibault et al. (2024-09)
      Navigating the Digital Chain in Concrete 3D Printing
1226. Mezhov Alexander, Robens-Radermacher Annika, Unger Jörg, Schmidt Wolfram (2024-09)
      Effect of the Ambient Temperature on the Structural Build-Up of 3D Printed Concrete:
      Experimental and Modelling Study
1227. Márquez Álvaro, Ramallo Laura, Varela Hugo, Barluenga Gonzalo et al. (2024-09)
      3D Printing Architectural Applications of Cement-Lime Mortars with Microencapsulated Phase-Change-Material
1228. Zhao Cong, Wang Hailong, Sun Xiaoyan (2024-09)
      Cross-Layer Reinforcement Robot for 3D Printing Concrete:
      Hardware, Software, and Validation
1229. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
      Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
1230. Bang Jin, Yim Hong (2024-09)
      Non-Destructive Evaluation for the Unbonded Inter-Layer of 3D Printed Concrete
1231. Jiang Yu, Tabbaa Abir, Daly Ronan (2024-09)
      Effects of Time-Dependent Rheological Properties of Cementitious Materials on the Print Quality of Extrusion-Based 3D Printing
1232. Alencar Oliveira Francisco, Picelli Sanches Renato, Barari Ahmad, Oliveira Romano Roberto et al. (2024-09)
      Greenhouse Gases Emission Reduction Trough Topology-Optimization and 3D Printing
1233. Mudadu Antonio, Giulivo Marco, Menna Costantino (2024-09)
      The Effect of Printing-Path on the Shear Behavior of 3D Printed Concrete Panels Under Diagonal Compression-Test
1234. Mesnil Romain, Sarkis Rosa Pedro, Caron Jean-François (2024-09)
      Thickness-Optimization of 3D Printed Structures Considering Structural Failure
1235. Oliveira Romano Roberto, Lima Francisco, Mesquita José, Pan Eduardo et al. (2024-09)
      Extended Rheological Characterization as a Tool for Low-Binder 3D Printing Compositions
1236. Wolfs Robert, Gümrük Idil, Driessen Saar, Ferguson Matthew et al. (2024-09)
      3D Concrete Printing and Circularity:
      Designing, Testing, and Modelling Dry Joints for Structural Applications
1237. Egawa Ryo, Nezu Shoichi, Nishijo Keisuke, Ohno Kazunori et al. (2024-09)
      Different Sized Metal Reinforcement Insertion System Using Cartridge Replacement Mechanism for 3D Concrete Printer
1238. Rodriguez Fabian, Foster Kyle, Fross Xavier, Schmidt Roty et al. (2024-09)
      Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing
1239. Liu Ruiqing, Du Hongjian (2024-09)
      Improving Thermal Insulation Performance of 3D Printed Concrete Wall
1240. Jacquet Yohan, Perrot Arnaud (2024-09)
      Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
1241. Gümrük Idil, Wolfs Robert, Schröder Torsten, Salet Theo (2024-09)
      Circular Design-Strategies for 3D Concrete Printing in the Built Environment
1242. Irizarry Elmer, Gomaa Shady, Rosa Raul, Ahmed Ayesha et al. (2024-09)
      Mechanical Characterization of 3D Printed Ultra-High-Performance Concrete
1243. Zhang Nan, Sanjayan Jay (2024-09)
      Rheological Modifiers in Optimizing Quick Nozzle Mixing Technology for 3D Concrete Printing
1244. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2024-09)
      Surface Processing of Shotcrete 3D Printed Concrete Elements Using a Rotating Trowel Disc:
      Influence of Timing on Resulting Surface Quality
1245. Kurup Davya, Rahul Attupurathu (2024-09)
      Early-Age Shrinkage Measurement in 3D Printed Con-Crete by Digital Image Correlation:
      Influence of Spray Paints
1246. Brunner Kim, Tandon Kai, Stengel Thorsten (2024-09)
      Hydration Characteristics of 3D Particle-Bed Printed Cementitious Specimens
1247. Markin Slava, Mechtcherine Viktor (2024-09)
      Mitigating Plastic Shrinkage and Cracking in 3D Printed Concrete Through Surface Rewetting
1248. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
      Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
1249. Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
      Multi-Objective-Optimization of a Sustainable Ternary Mortar for 3D Printing
1250. Rehman Atta, Kang Manmin, Basha Shaik, Choi Kichang et al. (2024-09)
      Knife-Cut-Test of Concrete:
      The Introduction of a New Test-Method for Measurement of the Structural Build-Up of 3D Concrete Printing-Materials
1251. Zimmermann Stefan, Griego Danielle, Flatt Robert (2024-09)
      Visualizing Defects of Concrete 3D Printed Structures with Augmented Reality Based on Machine Learning-Driven Image-Analysis
1252. Khan Mehran, McNally Ciaran (2024-09)
      A Review of Developments in Low-Carbon 3D Printed Concrete in Europe:
      Steps Towards Sustainable Construction
1253. Sun Xiaoyan, Lin Xiqiang, He Huanan, Yang Hongyang et al. (2024-09)
      Steel Reinforced 3D Printing Concrete Housing Building and Its Modular Assembly Construction
1254. Will Frank, Storch Florian, Plaschnick Paul, Taubert Markus et al. (2024-09)
      Large-Scale Monolithic Printing with Ready-Mixed Concrete:
      Challenges and Solutions
1255. Baz Bilal, Nana W., Mothe Loïc, Florentin Jérôme et al. (2024-09)
      Structural Behavior of 3D Printed Load Bearing Elements
1256. Nerella Venkatesh, Degen Robin, Frasch Markus (2024-09)
      On-Site Ready-Mix Concrete 3D Printing with Karlos
1257. Rodrigues e Silva Rafaela, Souza Eduarda, Ribeiro Borges Paulo (2024-09)
      One-Part and Two-Part Alkali-Activation of Iron Mining-Tailings for Sustainable 3D Concrete Printing Mixes
1258. Park Gwang, Kim Jae (2024-09)
      Optimization Shape Stability for Printed Pre-Cast Column Using Matric-Suction-Effect
1259. Zhou Wen, Xu Yading, Šavija Branko, McGee Wesley et al. (2024-09)
      Stitching Engineered Cementitious Composites (ECC ):
      Unraveling Anisotropy Challenges Through Architectured 3D Printing Path Design
1260. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-09)
      Preliminary Study on Multi-Functional Building Components Utilizing Variable Density Foamed Concrete via 3D Printing
1261. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2024-09)
      Non-Linear Behavior Under Compression of Hardened 3D Printed Concrete
1262. Mohemmi Morteza, Sadeghian Vahid, Panda Biranchi, Boyle Sheryl (2024-09)
      Numerical Modeling of Lateral Resistance of 3D Printed Concrete Walls
1263. Chaudhari Ojas, Johansson Jan, Haage Mathias, Sjölander Andreas et al. (2024-09)
      3D Printing-Strategy and Implementation for Concrete Prefabrication Industry in Sweden
1264. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Bundur Zeynep, Bebek Özkan (2024-09)
      Bio-Based Additives to Improve the Rheology of High-Volume Fly-Ash Cement-Based Mortar for 3D Printing
1265. Anton Ana-Maria, Dillenburger Benjamin (2024-09)
      Towards a Sustainable 3D‐Concrete‐Printed Architecture:
      Assemblies, Detailing and Ornamentation
1266. Hack Norman, Kloft Harald, Mai (née Dressler) Inka, D'Acunto Pierluigi et al. (2024-09)
      Injection 3D Concrete Printing:
      From Structural Geometry to Fabrication
1267. Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk, Jongvisuttisun Passarin et al. (2024-09)
      Uniaxial Compression on 3D Printed Load-Bearing Walls with Openings
1268. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
      An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
1269. Wei Yazhi, Zhang Hui (2024-09)
      Influence of Temperature and Humidity on Mechanical Properties of Calcined-Oyster-Shell-Powder-Modified 3D Printed Concrete
1270. Liu Bing, Chen Yuwen, Li Dongdong, Wang Yang et al. (2024-09)
      Study on the Fracture Behavior and Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete
1271. Hou Shaodan, Wu Wenbo, Duan Zhenhua, Zhou Shuai et al. (2024-09)
      Rheology of Fiber-Reinforced Mortar for 3D Printing Construction:
      Effect of Recycled Hybrid-Powder and Polyethylene-Fiber
1272. Ting Guan, Tay Yi, Quah Tan, Tan Ming et al. (2024-09)
      Sustainable Support-Material for Overhang Printing in 3D Concrete Printing Technology
1273. Qiu Minghong, Sun Yan, Qian Ye (2024-09)
      Impact of Groove-and-Tongue Parameters on the Bonding Behavior Between 3D Printed UHP-SHCC and Cast Normal Concrete
1274. Sood Sandeep, Lamba Yogveer, Singh Ashutosh (2024-09)
      Progress and Prospects of 3D and 4D Printing in Sustainable Development:
      A Scientometric Review
1275. Zhang Hongping, Duan Shuni, Hu Zhichao, Liu Litao et al. (2024-09)
      Evaluation of Plasticity and Determination of Deformation Index of 3D Printed Composite Cement-Based Materials
1276. Sovetova Meruyert, Kaiser Calautit John (2024-08)
      Thermal and Energy Efficiency in 3D Printed Buildings:
      Review of Geometric Design, Materials and Printing Processes
1277. Chousou Georgia, Yoo Angela, Jipa Mihail-Andrei, Dillenburger Benjamin (2024-08)
      Cadenza:
      3D Printed Formwork for a Free-Form Stair
1278. Chaari Mohamed, Pereira Gilroy, Daroge Fawwad, Buainain Shamma (2024-08)
      3D Printing Birdhouses with Ceramic Clay Using a Six-Axis Palletizing Robot
1279. Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
      Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete
1280. Jipa Mihail-Andrei, Lydon Gearóid, Yoo Angela, Chousou Georgia et al. (2024-08)
      HiRes:
      3D Printed Formwork for an Integrated Slab
1281. Mani Aravindhraj, Sekar Muthu (2024-08)
      Non-Destructive Testing Techniques for Investigating Mechanical Property and Porosity-Disparities in Extrusion 3D Printed Concrete
1282. Mitrović Stefan, Ignjatović Ivan (2024-08)
      Connections Between Single Elements Made by 3D Printed Concrete
1283. Tomečka Petr, Nováček Jan, Stráský Jiří (2024-08)
      New Structures from Printed UHPC
1284. Thajeel Marwah, György L. (2024-08)
      Hardened Properties of 3D Printed Concrete Influenced by Anisotropy
1285. Giacomobono Leonardo, Argenti Maria, Ferretti Elena, Paparella Giulio (2024-08)
      Three-Dimensional Printing with Earthen Materials:
      A Settlement-Scale Design Experience
1286. Parida Lukesh, Moharana Sumedha (2024-08)
      Structural Health Monitoring for 3D Printed Civil Infrastructures:
      A Review of Challenges, Applications and Future Directions
1287. Ler Kee-Hong, Ma Chau-Khun, Chin Chee-Long, Ibrahim Izni et al. (2024-08)
      Porosity and Durability Tests on 3D Printing Concrete:
      A Review
1288. Zhao Zhihui, Liu Minghao, Kang Aihong, Cai Xianhuan et al. (2024-08)
      Rheology and Buildability of Sustainable 3D Printed Magnesium-Potassium-Phosphate-Cement Composites Incorporating MgO-SiO2-K2HPO4
1289. Jarabo Rocío, Fuente González Elena, García Calvo José, Carballosa Pedro et al. (2024-08)
      Nano-Crystalline-Cellulose to Reduce Superplasticizer-Demand in 3D Printing of Cementitious Materials
1290. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
      On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
1291. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
      Snapshot on 3D Printing with Alternative Binders and Materials:
      Earth, Geopolymers, Gypsum and Low-Carbon Concrete
1292. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
      On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
1293. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2024-08)
      Design and Development of a Small-Scale Cement-Based 3D Printing Robot Extrusion Nozzle
1294. Hanifa Mohamad, Figueiredo Bruno, Mahdy Deena, Mendonça Paulo et al. (2024-08)
      Continuum Optimization of 3D Printed Self-Supported Shell:
      Hybrid Strategy for Crafting Ribbed System
1295. Bodea Serban, Dell’Endice Alessandro, Aloutsanidis Vasilis, Bürgin Theophil et al. (2024-08)
      Phoenix 3D Concrete-Printed Bridge:
      Falsework System and Construction Process Development
1296. Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
      New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing
1297. Lo Tzu-Hsien, Liu Bosheng (2024-08)
      Overview of Injection Liquid Printing with Dredged-Based Material for Concrete Formwork
1298. Chovghi Frederic, Richter David, Dörfler Kathrin, D'Acunto Pierluigi (2024-08)
      Reconsidering the Historical Cap Ceiling:
      Layerwise Form-Finding of Self-Supporting Vaulted Structures for In-Situ 3D Printing
1299. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
      Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
1300. Melcher Grace, Rauch Andy, Yashar Melodie, Ballard Jason (2024-08)
      3D Printing ICONs Cosmic Pavilion:
      A Case Study in Cementitious Extrusion of Unsupported Cantilevers
1301. Georgiou Christos, Kontovourkis Odysseas (2024-08)
      Robotic 3D Printing on Inclined Surfaces Using Adaptive Formwork Principles for Prefabricated Curve-Like Structures
1302. Carcassi Olga, Maierdan Yierfan, Kawashima Shiho, Alon Lola (2024-08)
      Recyclability of Earth-Fiber Materials for 3D Printing
1303. Rennen Philipp, Gantner Stefan, Rothe Tom, Baz Bilal et al. (2024-08)
      Structural Evaluation of Shotcrete 3D Printing and Robotic Fiber Winding for Thin-Shell Elements
1304. Bolhassani Damon, Yavartanoo Fahimeh, Tapia Javier, Akbarzadeh Masoud et al. (2024-08)
      The Effect of Post-Tensioning on the Behavior of Small-Scale 3D Printed Concrete Beams
1305. Vatandoost Mohsen, McGee Wesley, Buelow Peter (2024-08)
      Ultra-Thin-Layered 3D Printed Hollow-Core Sections for Concrete Casting
1306. Alotaibi Badr, Ibrahim Shema Abdulsalam, Umar Ibrahim Abdullahi, Awad Abuhussain Mohammed et al. (2024-08)
      Assimilation of 3D Printing, Artificial Intelligence and Internet of Things for the Construction of Eco-Friendly Intelligent Homes:
      An Explorative Review
1307. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
      Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
1308. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-08)
      Time-Dependent Behavior of 3D Printed Fiber-Reinforced Limestone-Calcined-Clay-Cement Concrete Under Sustained Loadings
1309. Soto Rubio Mauricio, Mirza Muhammad, Kagdi Mustafa, Bisati Ahmad (2024-08)
      Examining the Role of Concrete 3D Printing for Housing Construction on Indigenous Reserves in Canada
1310. Du Guoqiang, Sun Yan, Qian Ye (2024-08)
      3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) Reticulated Shell Roof Inspired by the Water Spider
1311. Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
      A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
      Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing
1312. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2024-08)
      Effect of Pumping Process on the Properties of 3D Printed Concrete Containing Air-Entraining-Agent
1313. Ahmad Lina, Jabi Wassim, Sosa Marco (2024-08)
      Non-Planar Robotic Printing of Earth-Based Material:
      A Case Study Using Cob-Like Mixture
1314. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2024-08)
      Exploration of the Open-Time and Compressive Strength of Alkali-Activated Mixtures for 3D Printed Concrete
1315. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
      3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
      Feasibility in Long-Open-Time Applications
1316. Shahzad Qamar, Li Fangyuan (2024-08)
      Assessment of Load-Bearing Capacity and Buildability Failures in 3D Printed Concrete Structures
1317. Rudziewicz Magdalena, Maroszek Marcin, Setlak (nee Pławecka) Kinga, Góra Mateusz et al. (2024-08)
      Optimization of Foams-Polypropylene Fiber-Reinforced Concrete Mixtures Dedicated for 3D Printing
1318. Robayo-Salazar Rafael, Muñoz Miguel, Vargas Armando, Gutiérrez Ruby (2024-08)
      Effects of Incorporating Bentonite, Metakaolin, Microsilica, and Calcium-Carbonate on the Rheological Properties of Portland-Cement-Based 3D Printing Inks
1319. Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-08)
      The Effect of Nano-Zinc-Oxide on Freeze-Thaw-Resistance of 3D Printed Geopolymer Mortars
1320. Yao Yiming, Bu Dechao, Yu Jiamian, Shao Lijing et al. (2024-08)
      Flexural Behavior of Textile Reinforced 3D Printed Concrete Under Quasi-Static and Dynamic Impact Loads
1321. Rehman Saif, Riaz Raja, Usman Muhammad, Kim In-Ho (2024-08)
      Augmented Data-Driven Approach Towards 3D Printed Concrete Mix Prediction
1322. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
      Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
1323. Yu Qian, Zuo Qinxin, Zhang Yamei, Pan Jinlong (2024-08)
      An Investigation on Enhancing the Bonding Properties of 3D Printed Concrete Permanent Formwork and Post-Casted Concrete
1324. Li Leo, Zhang Guang-Hu (2024-08)
      Feasibility of Underwater 3D Printing:
      Effects of Anti-Washout-Admixtures on Printability and Strength of Mortar
1325. Nguyen Vuong, Tran Jonathan, San Ha Ngoc, Xie Yi et al. (2024-08)
      Blast-Resistance of 3D Printed Bouligand Concrete Panels Reinforced with Steel-Fibers:
      Numerical Investigations
1326. Prathipati S., Vardhan J., Murali D., Nithin C. et al. (2024-08)
      An Experimental Study on the Effect of a Viscosity-Modifying-Agent on the Rheological and Strength Behavior of 3D Printed Concrete
1327. Dvorkin Leonid, Marchuk Vitaliy, Makarenko Ruslan (2024-08)
      Mechanochemical-Activated Fly-Ash Concrete Suitable for 3D Printing
1328. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
      Spray-Based 3D Printed Foam-Concrete:
      Cooperative Optimization for Lightweight and High-Strength Performance
1329. Yan Ruizhen, Meng Fangqi, Ke Guoju, Jia Kerui (2024-08)
      Comparative Evaluation of the Applicability of 3D Printing Mortar with Different Waste-Powders
1330. Zhi Yefan, Teng Teng, Akbarzadeh Masoud (2024-08)
      Designing 3D Printed Concrete Structures with Scaled Fabrication Models
1331. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-08)
      Evaluation and Optimization of Micro-Calcium-Carbonate-Modified 3D Printed Rubber-Crumb Concrete
1332. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
      Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
1333. Yuan Shuaihua, Duan Dengke, Sun Junbo, Yu Yi et al. (2024-08)
      Mechanical, Alkali Excitation, Hydrothermal Enhancement of 3D Printed Concrete Incorporated with Antimony-Tailings
1334. Glotz Theresa, Petryna Yuri (2024-08)
      Experimental Characterization of Anisotropic Mechanical Behavior and Failure-Mechanisms of Hardened Printed Concrete
1335. Banijamali Kasra, Vosoughi Payam, Arce Gabriel, Noorvand Hassan et al. (2024-08)
      Automated Strength Monitoring of 3D Printed Structures via Embedded Sensors
1336. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
      Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
      A Preliminary Investigation Towards 3D Printing
1337. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
      Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
      From Standard Casting to 3D Printing
1338. Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2024-08)
      Comparison of Reinforcement-Fibers in 3D Printing Mortars Using Multi-Criteria Analysis
1339. Jiang Shangjin, Wang Yuntao, Hua Sudong, Yue Hongfei et al. (2024-08)
      Preparation and Performance Characterization of Low-Density 3D Printed Expanded Perlite-Foam-Concrete
1340. Hutyra Adam, Bańkosz Magdalena, Tyliszczak Bożena (2024-08)
      Technology for Automated Production of High-Performance Building Compounds for 3D Printing
1341. Ahmed Salma, Romdhane Lotfi, Sayegh Sameh, Manjikian Solair (2024-08)
      Risk-Assessment for 3D Printing in Construction Projects
1342. Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
      Self-Supporting Lamellae:
      Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures
1343. Xu Wen, Jiang Dengjie, Zhao Qian, Wang Linbing (2024-08)
      Study on Printability of 3D Printing Carbon-Fiber-Reinforced Eco-Friendly Concrete:
      Characterized by Fluidity and Consistency
1344. Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
      Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
      Preliminary Study
1345. Pemas Sotirios, Sougioultzi Konstantina, Kouroutzidou Chrysoula, Stefanidou Maria et al. (2024-07)
      Enhancing Clay-Based 3D Printed Mortars with Polymeric Mesh Reinforcement Techniques
1346. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Giridhar Greeshma et al. (2024-07)
      Structural Build-Up-Model for Three-Dimensional Concrete Printing Based on Kinetics-Theory
1347. Sovetova Meruyert, Calautit John (2024-07)
      Design, Calibration and Performance Evaluation of a Small-Scale 3D Printer for Accelerating Research in Additive Manufacturing in Construction
1348. Baghi Ali, Aminpour Nima, Memari Ali, Bilén Sven et al. (2024-07)
      3D Concrete Printing of Self-Supported Filaments via Entrained Cables:
      Constructing Formwork-Free Spanning Structures
1349. Rubeis Tullio, Ciccozzi Annamaria, Giusti Letizia, Ambrosini Dario (2024-07)
      On the Use of 3D Printing to Enhance the Thermal Performance of Building Envelope:
      A Review
1350. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
      Advancing Sustainable Construction:
      Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
1351. Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
      Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
1352. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
      Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
1353. Huang Zili, Yang Weiyi, Verma Rupesh, Nguyen Giang et al. (2024-07)
      Application of Adelaide-University-Snapback-Indirect-Tensile-Test on 3D Printed Cement-Based Materials
1354. Peng Yiming, Unluer Cise (2024-07)
      Development of 3D Printed Magnesium-Silicate-Hydrate-Cement Mixes Involving Metakaolin as a Substitute for Silica-Source
1355. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
      Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
1356. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2024-07)
      Influence of Curing Conditions on the Shrinkage Behavior of Three-Dimensional Printed Concrete Formwork
1357. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
      A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
1358. Shahzad Qamar, Akbar Muhammad, Alzara Majed, Yosri Ahmed et al. (2024-07)
      Time-Dependent Buildability Evaluation of 3D Printed Concrete:
      Experimental Validation and Numerical Simulation
1359. Liu Nana, Gan Qili, Tao Qin, Wang Jie (2024-07)
      Research on Materials for Concrete (Mortar) 3D Printing Fabricated Components
1360. Souza Dias Leonardo, Anjos Marcos, Barbosa Marcella, Bezerra Ulisses (2024-07)
      Evaluation of Mix-Design Parameters Based on Basic Constitutive-Relationships for 3DCP Printing
1361. Goidea Ana, Popescu Mariana, Johansson Anton, Andreén David (2024-07)
      Algorithmic Modeling of Functionally Graded Metamaterials in 3D Printed Building Envelopes
1362. Sahai Rajan, Bisht Ravindra, Singh Siddharth, Panigrahi Soraj (2024-07)
      Design-Analysis and Development of a Gantry Robot for Multi-Layer 3D Concrete Printing with Simulation and Experimental Validation
1363. Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
      Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete
1364. Qiu Minghong, Qian Ye, Sun Yan, Leung Christopher (2024-07)
      Flexural Performance of Concrete Beams via 3D Printing Stay-in-Place Formwork Followed by Casting of Normal Concrete
1365. Hanratty Niall, Khan Mehran, McNally Ciaran (2024-07)
      The Role of Different Clay Types in Achieving Low-Carbon 3D Printed Concretes
1366. Silva João, Wagner Gabriel, Silva Rafael, Morais António et al. (2024-07)
      Real-Time Precision in 3D Concrete Printing:
      Controlling Layer Morphology via Machine Vision and Learning Algorithms
1367. Giwa Ilerioluwa, Kazemian Ali, Gopu Vijaya, Rupnow Tyson (2024-07)
      A Compressive Load-Bearing-Analysis of 3D Printed Circular Elements
1368. Baktheer Abedulgader, Claßen Martin (2024-07)
      A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete
1369. Zhang Nan, Sanjayan Jay (2024-07)
      Pumping-Less 3D Concrete Printing Using Quick Nozzle Mixing
1370. Givkashi Mohammad, Tohidloo Mohammad (2024-07)
      The Effect of Freeze-Thaw-Cycles and Sulfuric-Acid-Attack Separately on the Compressive Strength and Microstructure of 3D Printed Air-Entrained Concrete
1371. Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
      Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete
1372. Mütevelli Özkan İffet, Aldemir Alper (2024-07)
      Machine-Learning Networks to Predict the Ultimate Axial Load and Displacement Capacity of 3D Printed Concrete Walls with Different Section Geometries
1373. Mitrović Stefan, Vidović Milica, Ignjatović Ivan, Dragaš Jelena (2024-07)
      Experimental Testing of 3D Printed Concrete Truss-Girder
1374. Malik Umair, Riaz Raja, Rehman Saif, Usman Muhammad et al. (2024-07)
      Advancing Mix-Design Prediction in 3D Printed Concrete:
      Predicting Anisotropic Compressive Strength and Slump-Flow
1375. Kladovasilakis Nikolaos, Pemas Sotirios, Pechlivani Eleftheria (2024-07)
      Computer-Aided Design of 3D Printed Clay-Based Composite Mortars Reinforced with Bio-Inspired Lattice Structures
1376. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
      Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
1377. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-07)
      Application of Textile Reinforcement for 3D Concrete Printed Structures
1378. Lin Xiqiang, Wang Hailong, Sun Xiaoyan, Kikhia Wael et al. (2024-07)
      Construction Technology of the Curved Mars House Digital Hotel Project in China Using Concrete 3D Printing
1379. Dorresteijn Evelien, Tsiotou Sofia, Lowke Dirk (2024-07)
      Keeping the Processability of a Clay Mortar for Extrusion 3D Printing While Decreasing Shrinkage and Increasing the Green Strength
1380. Markin Slava, Combrinck Riaan, Mechtcherine Viktor (2024-07)
      Specifics of Plastic Shrinkage in 3D Printed Concrete Elements
1381. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
      Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
1382. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
      Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
1383. Rehman Atta, Basha Shaik, Choi Kichang, Kang Manmin et al. (2024-07)
      An Analysis of Penetrometer-Test Methods for Structural Build-Up in Stiff and Accelerated 3D Concrete Printing Mixtures
1384. Mozaffari Salma, Kamravafar Rahasadat, Li Yunyan, Mata-Falcón Jaime et al. (2024-07)
      Leveraging Clay-Formwork 3D Printing for Reinforced-Concrete Construction
1385. Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
      Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
      Experimental and Numerical Studies
1386. Lv Zhenyuan, Duan Zhenhua, Xiao Jianzhuang, Ji Guangchao (2024-07)
      Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates:
      Material, Equipment and Performance
1387. Jiang Fangming, Lin Manfang, Yu Kequan (2024-07)
      Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh
1388. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2024-07)
      Granular Materials for 3D Printing of Construction Components and Structures
1389. Mai (née Dressler) Inka, Gosslar Joschua, Khader Noor, Lowke Dirk et al. (2024-07)
      Workflow for Earth-Based 3D Printing
1390. Chen Zhaohui, Wang Zhenyue, Liao Minmao, Sun Junbo et al. (2024-07)
      Influence of Printing-Pattern on Bearing-Capacity of 3D Printed Concrete Hollow Structures
1391. Paquet Elodie, Furet Benoît, Perrot Arnaud (2024-07)
      3D Printed Raw Earth Structures to Create in Cities Vegetated Oasis of Coolness
1392. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-07)
      Set-on-Demand Geopolymer for Concrete 3D Printing Using Ternary Activator
1393. Dielemans Gido, Lachmayer Lukas, Khader Noor, Hack Norman et al. (2024-07)
      Robotic Repair:
      In-Place 3D Printing for Repair of Building Components Using a Mobile Robot
1394. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
      3D Printing with Stabilized Earth:
      Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
1395. Lim Sean, Tay Yi, Amr Issam, Fadhel Bandar et al. (2024-07)
      Carbon Sequestration with 3D Concrete Printing:
      Potentials and Challenges
1396. Li Bingying, Ding Tao, Qu Changwei, Liu Wei (2024-07)
      Modification of Fresh and Hardened Properties of 3D Printed Recycled Mortar by Superabsorbent Polymers
1397. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
      Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
1398. Lu Bing, Li Mingyang, Qian Shunzhi, Li King et al. (2024-07)
      High-Performance 3D Concrete Printing with Zeolite
1399. Quah Tan, Tay Yi, Tan Ming, Li King (2024-07)
      Evaluation of Extrusion-Methods for 3D Concrete Printing
1400. Shin Eun, Carcassi Olga, Maierdan Yierfan, Kawashima Shiho et al. (2024-07)
      Developing 3D Printed Natural Fiber-Rich Earth Materials in Construction
1401. Wang Jinjin, Chen Cheng, Chu Tianwei, Jiang Liming et al. (2024-07)
      Experimental Study and OpenSees Modelling for Thermal Response of 3D Printed Concrete Exposed to Fires
1402. Shao Lijing, Feng Pan, Liu Qi, Liu Zhaolong (2024-07)
      Improvements in the Printability of Printed Mortar Using In-Situ Polymerization
1403. Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-07)
      CFD Simulation of Twin-Pipe Pumping Process for 3D Concrete Printing
1404. Tay Yi, Wang Lining, Wang Xiangyu, Quah Tan et al. (2024-07)
      Integration of Functional Materials into 3D Printing for Construction
1405. Zhang Xiaoyue, Huang Wanru, Chen Zhaohui (2024-07)
      Mechanical Behavior Investigation for the Timber-UHPC Shear Connector in 3D Printed Concrete-Based Composite Beam
1406. Tay Yi, Soh Eugene, Ferrand Hortense, Tan Ming (2024-07)
      3D Printing of Large-Scale Biodegradable Material
1407. Hanifa Mohamad, Daruari Harish, Figueiredo Bruno, Mendonça Paulo (2024-07)
      Embodied Carbon of Structural Earthen Composites with Natural Materials and Byproducts Suitable for Robotic 3D Printing
1408. Sovetova Meruyert, Calautit John (2024-07)
      Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures
1409. Asghari Y., Mohammadyan-Yasouj S., Petrů M., Ghandvar H. et al. (2024-07)
      3D Printing and Implementation of Engineered Cementitious Composites:
      A Review
1410. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
      A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
1411. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-07)
      Economic Analysis of Offsite and Onsite 3D Construction Printing Techniques for Low-Story Buildings:
      A Comparative Value-Stream-Assessment
1412. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
      A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
      An Experimental and Numerical Approach
1413. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
      Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
1414. Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
      Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
1415. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
      Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
1416. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
      Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
1417. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
      Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
1418. Nhieu Nhat-Luong, Dang Tri (2024-07)
      An Integrated T-Spherical Fuzzy Einstein Interaction Aggregator Group Decision-Making Approach:
      A Case Study of Concrete 3D Printing Robot Application in Vietnam
1419. Butkutė Karolina, Vaitkevičius Vitoldas, Adomaitytė Fausta (2024-07)
      Eco-Friendly 3D Printed Concrete Made with Waste and Organic Artificial Aggregates
1420. He Lewei, Chen Bingzhi, Liu Qimin, Chen Hao et al. (2024-07)
      A Quasi-Exponential Distribution of Interfacial Voids and Its Effect on the Inter-Layer Strength of 3D Printed Concrete
1421. Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
      Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites
1422. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2024-07)
      Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
1423. Duarte Gonçalo, Brown Nathan, Duarte José (2024-07)
      Workflow for Generating, Simulating, and Optimizing Form and Tool-Path in 3D Concrete Printing of Vaults
1424. Bai Meiyan, Xiao Jianzhuang, Shen Jianyu, Ding Tao et al. (2024-07)
      Printability and Mechanical Anisotropy of 3D Printed Concrete with Manufactured Sand Derived from Basalt
1425. Wang Jun, Zhang Xuanzheng, Liu Zhenhua, Zhao Jiasheng (2024-07)
      Study on the Effects of Printing Process and Reinforcement Materials on the Performance of 3D-Printed Glass Bead Insulation Mortar
1426. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
      Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
1427. Kamra Juhi, Mani Ambica, Tripathi V. (2024-06)
      3D Printing:
      A Boon or a Bane for Sustainable Construction
1428. Villiers Wibke, Mwongo Mwiti, Babafemi Adewumi, Zijl Gideon (2024-06)
      Quantifying Recycled Construction and Demolition Waste for Use in 3D Printed Concrete
1429. Ramesh Akilesh, Rajeev Pathmanathan, Xu Shanqing, Sanjayan Jay et al. (2024-06)
      Impact Response of Textile-Reinforced 3D Printed Concrete Panels
1430. Shoaei Parham, Gallantree-Smith Harrison, Martínez Pacheco Victor, Pamies Ramón et al. (2024-06)
      Comparative Analysis of 3D Printing of Portland Cement Mortars with Hydroxypropyl-Methylcellulose and Micro-Fibrillated Cellulose as Viscosity-Modifying-Agents
1431. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2024-06)
      Buildability of Complex 3D Printed Concrete Geometries Using Peridynamics
1432. Ghaffar Seyed, Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen (2024-06)
      Emerging Resources for the Development of Low-Carbon Cementitious Composites for 3D Printing Applications
1433. Salaimanimagudam M., Jayaprakash Jaganathan (2024-06)
      Optimal Selection of Cable-Reinforcement for Concrete 3D Printed Lattice-Beam
1434. Aslani Farhad, Zhang Yifan (2024-06)
      Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials
1435. Seifan Mostafa (2024-06)
      Sustainable Three-Dimensional Printing Concrete:
      Advances, Challenges, and Future Direction
1436. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
      Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
      A Parametric Numerical Modeling Approach
1437. Quintana-Ruiz Osvaldo, Campello Eduardo (2024-06)
      DEM Modeling of Advanced Manufacturing Technologies:
      From SLS to 3D Concrete Printing
1438. Giwa Ilerioluwa, Dempsey Mary, Fiske Michael, Kazemian Ali (2024-06)
      3D Printed Sulfur-Regolith Concrete Performance Evaluation for Waterless Extraterrestrial Robotic Construction
1439. Gu Yucun, Khayat Kamal (2024-06)
      Effect of Superabsorbent Polymer on 3D Printing Characteristics as Rheology-Modified-Agent
1440. Hasani Alireza, Dorafshan Sattar (2024-06)
      Transforming Construction?:
      Evaluation of the State of Structural 3D Concrete Printing in Research and Practice
1441. Sando Mona, Stephan Dietmar (2024-06)
      The Development of a Fly-Ash-Based Geopolymer for Extrusion-Based 3D Printing, Along with a Printability Prediction Method
1442. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
      Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
1443. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
      Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
1444. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
      Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
1445. Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
      Concrete Gyroid:
      An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
1446. Liu Junli, Haikola Pirjo, Fox Kate, Tran Jonathan (2024-06)
      3D Printing of Cementitious Composites with Seashell-Particles:
      Mechanical and Microstructural Analysis
1447. Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
      Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete
1448. Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
      A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing
1449. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2024-06)
      Improving the Structural Efficiency of Textured Three-Dimensional Concrete Printing Wall by Architectural Design
1450. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-06)
      3D Printed Multi-Functional Foamed Concrete Building Components:
      Material-Properties, Component Design, and 3D Printing Application
1451. Ma Jiayue, Samarasinghe Don, Rotimi James, Zou Kelvin (2024-06)
      Supply Chain Landscape of 3D Printed Buildings:
      A Stakeholder Decision Support Framework
1452. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-06)
      Encapsulation of Sodium-Silicate to Attain on Demand Buildability Enhancement in Concrete 3D Printing
1453. Konoplianyk Alexander, Sopilnyak Artem, Sirenok Kyrylo, Sereda Svitlana et al. (2024-06)
      Constituent Components of 3D Printing in Construction:
      Mixture, Reinforcement and Their Main Characteristics
1454. Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
      Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
1455. Du Jiashuai, Wei Yazhi, Zhang Hui, Idriss Aboubaker (2024-06)
      Effects of Oyster-Shell-Derivatives on Performance Enhancement of Biomass-Based 3D Printed Concrete
1456. González-Fonteboa Belén, Seara-Paz Sindy, Caneda-Martínez Laura (2024-06)
      3D Printing Concrete with Byproducts
1457. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
      Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
1458. Šahmenko Genādijs, Puzule Līga, Sapata Alise, Šlosbergs Pēteris et al. (2024-06)
      Gypsum-Cement-Pozzolan Composites for 3D Printing:
      Properties and Life Cycle Assessment
1459. Rama Krishna A., Mallik Mainak, Maity Damodar (2024-06)
      Developing an Appropriate Concrete Mix for 3D Concrete Printing
1460. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
      3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
      Fresh State, Hardened Material-Properties and Beam-Performance
1461. Mantha Bharadwaj, Sati Ala, Hosny Fatma, Abdallah Mohamed et al. (2024-06)
      A Generic 3D Printing Life Cycle Assessment (LCA) Framework for AEC Applications
1462. Besklubova Svetlana, Raza Muhammad, Zhong Ray, Skibniewski Mirosław (2024-06)
      3D Printing vs. Traditional Construction:
      Cost Comparisons from Design to Waste Disposal Stages
1463. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
      3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
      From Mixture Design to Printability Evaluation
1464. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2024-06)
      Reinvent Reinforced Concrete with Robotics and 3D Printing
1465. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
      Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
1466. Balkhy Wassim, Valera Elias, Karmaoui Dorra, Lafhaj Zoubeir et al. (2024-06)
      Motives and Barriers for Offsite and Onsite Construction 3D Printing
1467. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
      In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance
1468. Senthilnathan Shanmugaraj, Raphael Benny (2024-06)
      Buildability-Assessment of 3D Printed Concrete Elements Through Computer-Vision
1469. Zaki Ahmed, Carnevale Marco, Giberti Hermes, Schlette Christian (2024-06)
      Monitoring of 3D Concrete Printing Quality Through Multi-View RGB-D Images
1470. Razzaghian Ghadikolaee Mehrdad, Pan Zhu, Cerro-Prada Elena, Korayem Asghar (2024-06)
      Fresh and Hardened Properties of 3D Printing Mortar Modified by Halloysite-Nanotube
1471. Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
      Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing
1472. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
      A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
1473. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-05)
      Enhancing Inter-Layer Bonding Strength of 3D Printed Ternary Geopolymer Using Calcium-Carbonate-Whiskers Spray
1474. Thajeel Marwah, Sólyom Sándor, Balázs György (2024-05)
      Impact of Printing-Directions and Printing-Paths on the Compressive Strength of 3D Printed Concrete
1475. Yousaf Arslan, Rashid Ans, Koç Muammer (2024-05)
      Parameter-Tuning for Sustainable 3D Printing of Clay Structures
1476. Shao Yulong, Yang Jingwei, Kim Jineon, Song Jaejoon et al. (2024-05)
      Microscopic Analysis of Mechanical Anisotropy and Damage-Evolution of 3D Printed Rock-Like Samples Under Uniaxial Compressive Tests
1477. Maierdan Yierfan, Zhao Diandian, Choksi Pooja, Garmonina Maria et al. (2024-05)
      Rheology, 3D Printing, and Particle-Interactions of Xanthan-Gum-Clay Binder for Earth Concrete
1478. Gu Yucun, Khayat Kamal (2024-05)
      Extrudability Window and Off-Line Test-Methods to Predict Buildability of 3D Printing Concrete
1479. Mathew Ashitta, Philip Nivin, Jędrzejewska Agnieszka (2024-05)
      Enhancing Sustainability and Performance of 3D Printing Mortar with Alccofine 1203, GGBS, and Kaolin:
      Experimental Investigation and Mechanical Characterization
1480. Mohamed Ibrahim, Senthil Kumar (2024-05)
      3D Printed Concrete Using Portland-Pozzolana-Cement:
      Fly-Ash-Based
1481. Taqa Ala, Mohsen Mohamed, Aburumman Mervat, Naji Khalid et al. (2024-05)
      Nano-Fly-Ash and Clay for 3D Printing Concrete Buildings:
      A Fundamental Study of Rheological, Mechanical and Microstructural Properties
1482. Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
      Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC
1483. Gu Yucun, Zheng Shuyi, Ma Hongyan, Long Wujian et al. (2024-05)
      Effect of Absorption Kinetics of Superabsorbent Polymers on Printability and Inter-Layer Bond of 3D Printing Concrete
1484. Luo Surong, Li Wenqiang, Wang Dehui (2024-05)
      Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material
1485. Bai Meiyan, Xiao Jianzhuang, Wu Yuching, Ding Tao (2024-05)
      Experimental and Numerical Study on the Flexural Behavior of 3D Printed Composite Beams with U-Shaped ECC Formwork
1486. Berawi Mohammed, Sari Mustika, Oktaviani Astiti, Miraj Perdana et al. (2024-05)
      Impact of BIM and 3D Printing Technologies on Production Process and Productivity of Pre-Cast Concrete in Construction Project
1487. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
      Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
1488. Liu Qiong, Tang Huilin, Chen Kailun, Peng Bin et al. (2024-05)
      Utilizing CO2 to Improve Plastic Shrinkage and Mechanical Properties of 3D Printed Mortar Made with Recycled Fine Aggregates
1489. Sarker Mohiuddin, Rahmadan Md, Abedin Mohammad (2024-05)
      Engineered Cementitious Composites:
      Design, Structural and 3D Printing Applications
1490. Ghaderi Ehsan, Evans Pete, Doyle Shelby, Senske Nick et al. (2024-05)
      Hygrothermal Behavior of 3D Concrete Printed Wall Assemblies
1491. Wu Chengde, Evans Pete (2024-05)
      An Integrated System for Improving 3D Concrete Printing Process
1492. Otto Jens, Maiwald Patrick (2024-05)
      Classification and Automated Quality Assurance of 3D Concrete Printed Surfaces
1493. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
      Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
1494. Kamakshi Tippabhotla, Subramaniam Kolluru (2024-05)
      Rheology-Control and 3D Concrete Printing with Fly Ash-Based Aqueous Nano-Silica Enhanced Alkali-Activated Binders
1495. Feng Xiaowei, Du Gaoming, Carvelli Valter, Lin Gongshun et al. (2024-05)
      Failure-Analysis of 3D Concrete Printing Bolted Laminates Mimicking Geological Strata
1496. Liu Xiongfei, Zhao Xi, Wang Nan, Zhang Yi et al. (2024-05)
      Powder-Based 3D Printed Magnesium Phosphate Cement:
      Mechanical Isotropy Optimization Using Borax
1497. Nefs Karsten, Sloots Joes, Kroon Kim, Bos Freek et al. (2024-05)
      Analytical Modeling of the Orientation-Dependency of 3D Printed SHCC at Increasing Levels of Scale
1498. Mohamed Rania, Mohamed Abdelaziz (2024-05)
      Exploring the Environmental Benefits of 3D Printing Technology in Concrete Construction:
      A Review
1499. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
      Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
1500. Du Guoqiang, Qian Ye (2024-05)
      Effects of Printing-Patterns and Loading-Directions on Fracture Behavior of 3D Printed Strain-Hardening Cementitious Composites
1501. Bayatkashkooli Samira, Amirsardari Anita, Rajeev Pathmanathan, Sanjayan Jay et al. (2024-05)
      Investigation of Axial Load Capacity of 3D Printed Concrete Wall
1502. Gao Huaxing, Jin Lang, Chen Yuxuan, Chen Qian et al. (2024-05)
      Rheological Behavior of 3D Printed Concrete:
      Influential Factors and Printability Prediction Scheme
1503. Khan Mehran, McNally Ciaran (2024-05)
      Recent Developments on Low-Carbon 3D Printing Concrete:
      Revolutionizing Construction Through Innovative Technology
1504. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
      Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
      Determining Significant Processing Parameters and Their Effect on Mechanical Strength
1505. Ralston Nadia, Gupta Shashank, Moini Mohamadreza (2024-05)
      3D Printing of Architected Calcium-Silicate Binders with Enhanced and In-Situ Carbonation
1506. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha (2024-05)
      3D Concrete Printing Success:
      An Exhaustive Diagnosis and Failure-Modes-Analysis
1507. Jhun Jihye, Lee Dong-Hyun, Rehman Atta, Kang Seungwoo et al. (2024-05)
      Development of a Real-Time Geometric Quality Monitoring System for Extruded Filaments of 3D Concrete Printing Construction
1508. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
      Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
      A Review
1509. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
      Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
      Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
1510. Singh Aman, Digi Rohan, Mishra Ruby, Mohanty Rajiva et al. (2024-05)
      The Design and Development of a Low Cost 3D Concrete Printer
1511. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2024-05)
      Modelling, Analysis and Comparison of Robot Energy Consumption for Three-Dimensional Concrete Printing Technology
1512. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Moroni-Orellana Ginnia, Pedreros Fernando et al. (2024-05)
      From BIM-Model to 3D Construction Printing:
      A Framework Proposal
1513. Stout Ivy, Godfrey Grant, Dayley Jenna, Rodriguez Dexter et al. (2024-05)
      Concrete Mixture Properties and Designs for Additive Manufacturing:
      A Review of 3D Concrete Printing
1514. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
      Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures
1515. Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
      Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall
1516. Breseghello Luca, Hajikarimian Hamed, Naboni Roberto (2024-05)
      3DLightSlab:
      Design to 3D Concrete Printing Workflow for Stress-Driven Ribbed Slabs
1517. Raval Amitkumar, Patel C. (2024-05)
      The Influence of Accelerators on Compressive Strength and Setting-Time of Cement to Achieve High Early Strength for 3D Concrete Printing Technology
1518. Zhou Boyu, Zhang Mo, Ma Guowei (2024-05)
      An Experimental Study on 3D Printed Concrete Reinforced with Fibers Recycled from Wind Turbine Blades
1519. Han Yilong, Zhu Lin, Xue Rui, Liu Chenyu et al. (2024-05)
      Unpacking the Dynamics of 3D Concrete Printing Adoption:
      An Integrated UTAUT-TOE Approach
1520. Tran Mien, Ly Duy-Khuong, Nguyen Tan, Tran Nhi (2024-05)
      Robust Prediction of Workability Properties for 3D Printing with Steel-Slag-Aggregate Using Bayesian Regularization and Evolution Algorithm
1521. Jiang Wei, Li Wenqian, Chen Xi (2024-05)
      An Extended Numerical Model of the First Exothermic Peak for Three Dimensional Printed Cement-Based Materials
1522. Yuan Yong, Wang Xiaoyun, Zhang Jiao-Long, Tao Yaxin et al. (2024-05)
      The Shear Strength of the Interface Between Artificial Rock and Printed Concrete at Super Early-Ages
1523. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
      Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing
1524. Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
      Building a Greener Future:
      Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars
1525. Lyu Qifeng, Wang Yalun, Dai Pengfei (2024-05)
      Multilayered Plant-Growing Concrete Manufactured by Aggregate-Bed 3D Concrete Printing
1526. Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
      Internal Topology-Optimization of 3D Printed Concrete Structures:
      A Method for Enhanced Performance and Material-Efficiency
1527. Liu Han, Laflamme Simon, Alessandro Antonella, Ubertini Filippo (2024-05)
      3D Printed Self-Sensing Cementitious Composites Using Graphite and Carbon-Micro-Fibers
1528. Lu Ming, Wu Hao, Yuan Philip (2024-05)
      Optimization for Industrial Robot Joint Movement in Non-Horizontal 3D Printing Application
1529. Chen Anguo, Dai Pengfei, Lyu Qifeng (2024-05)
      Effect of Alkalized Straw-Fibers on the Properties of Three Dimensional Printed Cementitious Composite
1530. Lin Xinbo, Shao Yajian, Ma Guowei, Wang Li (2024-05)
      A New 3D Printing Method and Similar Materials of the Tunnel-Lining for the Geomechanical Model-Test
1531. Cheng Hanbin, Radlińska Aleksandra, Hilman Michael, Liu Feihong et al. (2024-05)
      Modeling Concrete-Deposition via 3D Printing Using Reproducing Kernel-Particle-Method
1532. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
      Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
      Printability and Environmental Perspective
1533. Wei Ying, Han Song, Yu Shiwei, Chen Ziwei et al. (2024-05)
      Parameter Impact on 3D Concrete Printing from Single to Multi-Layer Stacking
1534. Yang Jin, Zhai Gaoyuan, He Xingyang, Tang Yuanzhen et al. (2024-05)
      Properties and Microstructure of a Low-Carbon Clinker-Free Cementitious Binder and Its Extrusion-Based Printing Performance
1535. Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2024-05)
      Strategies Towards Large-Scale 3D Printing Without Size-Constraints
1536. Tao Yaxin, Yuan Yong (2024-05)
      3D Concrete Printing for Tunnel Linings:
      Opportunities and Challenges
1537. Alcayaga Restelli Adolfo, Avudaiappan Siva, Arrué Muñoz Ramón, Canales Cristian et al. (2024-04)
      Tailings as a Sustainable Resource in 3D Printed Concrete for the Mining Industry:
      A Literature Review
1538. Salaimanimagudam M., Jayaprakash Jaganathan (2024-04)
      Effect of Introducing Dummy Layers on Inter-Layer Bonding and Geometrical Deformations in Concrete 3D Printing
1539. Patel Abhishek, Raphael Benny (2024-04)
      Robotic 3D Printing of Structural Slabs Using Polyethylene Waste as Filler to Reduce Carbon Footprint
1540. Chen Yuxuan, Zhang Longfei, Wei Kai, Gao Huaxing et al. (2024-04)
      Rheology-Control and Shrinkage-Mitigation of 3D Printed Geopolymer Concrete Using Nano-Cellulose and Magnesium-Oxide
1541. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
      A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
1542. Lo Tzu-Hsien, Liu Bosheng (2024-04)
      Extruding Dredged-Based Material for Concrete Formwork through Rapid-Liquid-Printing
1543. Petruzzi Elena, Tsamis Alexandros, Ullal Chaitanya (2024-04)
      Toward a Digital Design Framework for the Thermal Tunability of 3D Printed Envelopes
1544. Kim Il (2024-04)
      3D Concrete Printing Frame Structure in Granular Medium
1545. Heywood Kate, Nicholas Paul (2024-04)
      3D Concrete Printing in a Circular Economy:
      What We Can Learn from a 3DCP Slab Designed for Dissassembly
1546. Kim Il (2024-04)
      Density Gradient Concrete Fabrication with Injection 3D Gypsum Printing
1547. Xu Weishun, Jin Chenxi, Qian Xidong, Jin Zihao (2024-04)
      Mass-Customization of Integrated Green Wall Building Blocks through Clay Printing Formwork
1548. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-04)
      Concrete 3D Printing Technology for Sustainable Construction:
      A Review on Raw Material, Concrete Type and Performance
1549. Huang Tao, Peng Zhongqi, Wang Mengge, Feng Shuang (2024-04)
      Study on the Ionic Transport Properties of 3D Printed Concrete
1550. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
      Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
      Meso-Scale Finite-Element-Analysis
1551. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-04)
      Characterization of Geopolymer Composites for 3D Printing:
      A Microstructure Approach
1552. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-04)
      Mitigation of Lack-of-Fusion in 3D Printed Limestone-Calcined-Clay-Cement Concrete Induced by Effective Micro-Organisms
1553. Mustafa Azamat, Storch Florian, Rustem Kairov, Plashnik Paul et al. (2024-04)
      Compensation Manipulator for Concrete 3D Printing Based on the CONPrint3D
1554. Duarte Gonçalo, Duarte José, Watson Nathan, Bilén Sven et al. (2024-04)
      Advancing 3D Concrete Printing for Extreme Environments:
      A Focus on Alaska
1555. Sun Bochao, Dominicus Randy, Dong Enlai, Li Peichen et al. (2024-04)
      Predicting the Strength Development of 3D Printed Concrete Considering the Synergistic Effect of Curing-Temperature and Humidity:
      From Perspective of Modified Maturity-Model
1556. Zaid Osama, Ouni Mohamed (2024-04)
      Advancements in 3D Printing of Cementitious Materials:
      A Review of Mineral Additives, Properties, and Systematic Developments
1557. Roux Charlotte, Archez Julien, Gall Corentin, Saadé Myriam et al. (2024-04)
      Towards Sustainable Material:
      Optimizing Geopolymer Mortar Formulations for 3D Printing
1558. Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
      Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
1559. Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Tamimi Adil, Trepci Esra et al. (2024-04)
      Towards Innovative and Sustainable Buildings:
      A Comprehensive Review of 3D Printing in Construction
1560. Uddin Md, Ye Junhong, Haque M., Yu Kequan et al. (2024-04)
      A Novel Compressive Strength Estimation Approach for 3D Printed Fiber-Reinforced Concrete:
      Integrating Machine Learning and Gene Expression Programming
1561. Yoshihara Rei, Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2024-04)
      Evaluation of Aggregate-Distribution Heterogeneity in 3D Printed Concrete by Means of X-Ray CT
1562. Khan Mohammad, Dani Aflah, Lim James, Roy Krishanu (2024-04)
      Appraising the Feasibility of 3D Printing Construction in New Zealand Housing
1563. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
      Up-Scaling Earth Formworks:
      3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
1564. Radl Elisabeth, Pfleger Marc-Patrick, Karolyi Juliian, Vill Markus (2024-04)
      Specimen Design and Advanced Material-Testing for 3D Printing Concretes
1565. Coward Andy, Forsberg Torben (2024-04)
      Reconstruction of a Ukrainian Road Bridge by Use of 3D Printed minimass™ Beams
1566. Silveira Júnior Jairon, Moura Cerqueira Kevin, Moura Ruan, Matos Paulo et al. (2024-04)
      Influence of Time-Gap on the Buildability of Cement Mixtures Designed for 3D Printing
1567. Pfleger Marc-Patrick, Radl Elisabeth, Esebali Osman, Vill Markus (2024-04)
      Load Bearing Behavior of 3D Printed Pre-Stressed Segmental Concrete Girders
1568. Calabrese Giuseppe, Hidding Arwin, Bier Henriette (2024-04)
      Review of Cementless Materials for 3D Printing of On- and Off-Earth Habitats
1569. Wang Yibo, Ren Changzai, Yan Ming, Ao Chenyang (2024-04)
      Blockage-Mechanism-Analysis and Optimization Design of 3D Concrete Print-Head
1570. Yang Liuhua, Gao Yang, Chen Hui, Jiao Huazhe et al. (2024-04)
      3D Printing Concrete Technology from a Rheology Perspective:
      A Review
1571. Xia Kailun, Chen Yuning, Chen Yu, Jia Zijian et al. (2024-04)
      Understanding and Modeling the Plastic Deformation of 3D Printed Concrete Based on Viscoelastic Creep Behavior
1572. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
      Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
1573. Wei Ying, Han Song, Chen Ziwei, Lu Jianxian et al. (2024-04)
      Numerical Simulation of 3D Concrete Printing Derived from Printer Head and Printing Process
1574. Babafemi Adewumi, Norval Chris, Kolawole John, Paul Suvash et al. (2024-04)
      3D Printed Limestone-Calcined-Clay-Cement Concrete Incorporating Recycled Plastic-Waste:
      RESIN8
1575. Haar Bjorn, Kruger Jacques, Zijl Gideon (2024-04)
      Off-Site 3D Printed Concrete Beam Design and Fabrication
1576. Akbarzadeh Masoud, Chai Hua, Zhi Yefan, Ororbia Maximilian et al. (2024-04)
      Diamanti:
      3D Printed, Post-Tensioned Concrete Canopy
1577. Dell’Endice Alessandro, Bodea Serban, Mele Tom, Block Philippe et al. (2024-04)
      Striatus 2.0 Phoenix:
      Improving Circularity of 3D Concrete Printed Unreinforced Masonry Structures
1578. Anton Ana-Maria, Lin Che, Skevaki Eleni, Wang Mingyang et al. (2024-04)
      Tor Alva:
      A 3D Concrete Printed Tower
1579. Chadha Kunaljit, Vasey Lauren, Kango Ananya, Aejmelaeus-Lindström Johan et al. (2024-04)
      Impact Printed Structures:
      Design Systems and Construction Strategies
1580. Dubor Alexandre, Cabay Edouard, Tayoun Yara, Carrasco Oriol et al. (2024-04)
      3D Printed Earth Architecture:
      Design Approach for a Performative Habitat
1581. Abbaoui Khalid, Korachi Issam, Jai Mostapha, Šeta Berin et al. (2024-04)
      3D Concrete Printing Using Computational Fluid Dynamics:
      Modeling of Material-Extrusion with Slip-Boundaries
1582. Wang Jun, Liu Zhenhua, Hou Jia, Ge Mengmeng (2024-04)
      Research-Progress and Trend-Analysis of Concrete 3D Printing Technology Based on CiteSpace
1583. Ding Yahong, Zhang Yaqi, Zhao Yu, Zhang Meixiang et al. (2024-04)
      Impact of Pre-Soaked Lime-Water-Carbonized Recycled Fine Aggregate on Mechanical Properties and Pore-Structure of 3D Printed Mortar
1584. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
      Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
1585. Rangel Carolina, Guimarães Ana, Salet Theo, Lucas Sandra (2024-03)
      3D Printing Lightweight Mortars with Cork to Improve Thermal Efficiency in Buildings
1586. Geng Songyuan, Mei Liu, Cheng Boyuan, Luo Qilong et al. (2024-03)
      Revolutionizing 3D Concrete Printing:
      Leveraging Random-Forest-Model for Precise Printability and Rheological Prediction
1587. Anandaraj S., Sowmya S., Krishnaraja A., Mithun T. (2024-03)
      Development of Green Engineered Cementitious Composite Using Fly-Ash and Nano-Silica for 3D Printing
1588. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
      Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
1589. Lu Yue, Xiao Jianzhuang, Li Yan (2024-03)
      3D Printing Recycled Concrete Incorporating Plant-Fibers:
      A Comprehensive Review
1590. Alhaidary Haidar (2024-03)
      Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building
1591. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
      Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
      The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
1592. Carcassi Olga, Maierdan Yierfan, Akemah Tashania, Kawashima Shiho et al. (2024-03)
      Maximizing Fiber-Content in 3D Printed Earth Materials:
      Printability, Mechanical, Thermal and Environmental Assessments
1593. Shahid Mursaleen, Sglavo Vincenzo (2024-03)
      Binder-Jetting 3D Printing of Binary Cement-Siliceous Sand Mixture
1594. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo, Castano-Alvarez Ruben (2024-03)
      Effects of 3D Printing on the Tensile Splitting Strength of Concrete Structures
1595. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
      A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
1596. Zhang Hongping, Duan Shuni, Han Qi, He Qiangqiang et al. (2024-03)
      Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate-Gradation-Optimization
1597. Kiruthiga K., Raju K., Venkatakrishnaiah R. (2024-03)
      A Short Review of 3D Printing from Construction Perspective
1598. Damarla Ravikanth, Lakshmi Keshav (2024-03)
      A Review on Impact-Assessment of 3D Printing Technology in the Field of Modern Construction
1599. Jay Bhumika, Basavanagowda G., Kumari Archana, Chauhan Aishwarya et al. (2024-03)
      Application of Internet of Things (IoT) in Seismic Performance Evaluation of 3D Printed Structure
1600. Pan Jinlong, Ping Pengxin, Ding Boyin, Zhu Binrong et al. (2024-03)
      Impact Behavior of 3D Printed Fiber-Reinforced Cementitious Composite Beams
1601. Ali Mohd, Nassrullah Ghaith, Al-Rub Rashid, Khaswaneh Bashar et al. (2024-03)
      Influence of Carbon-Nano-Tubes on Printing Quality and Mechanical Properties of 3D Printed Cementitious Materials
1602. Jancarikova Denisa, Khongova Ingrid, Bibora Petr, Szklorzova Halina (2024-03)
      3D Printed Cement Composites Testing
1603. Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
      Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites
1604. Rojas Jorge, Hasanzadeh Sognad (2024-03)
      Novel Digital Twin Architecture for 3D Concrete Printing in the AEC Industry
1605. Banijamali Kasra, Vosoughi Payam, Arce Gabriel, Noorvand Hassan et al. (2024-03)
      Early-Age Strength Monitoring of Sensor-Embedded 3D Printed Structures
1606. Giwa Ilerioluwa, Herbert Marc, Lamendola Joseph, Fiske Michael et al. (2024-03)
      Planetary Robotic Construction Using Large-Scale 3D Printing with Sulfur-Concrete
1607. Chen Yidong, Zhang Yunsheng, Liu Zhiyong, Zhang Wenhua et al. (2024-03)
      Quantitative Surface Quality Evaluation for 3D Printed Concrete with Coarse Aggregate Through 3D Scanning
1608. Nefs Karsten, Kroon Kim, Sloots Joes, Bos Freek et al. (2024-03)
      Orientation-Dependency of 3D Printed SHCC at Increasing Length Scale
1609. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-03)
      Optimization of Fiber-Reinforced Lightweight Rubber-Concrete Mix-Design for 3D Printing
1610. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2024-03)
      Durability and Pore-Structure of Metakaolin-Based 3D Printed Geopolymer Concrete
1611. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
      The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
1612. Hall Alice, Herbert Roger, Stafford Richard, Jones G. et al. (2024-03)
      3D Printed Habitat Enhancement Units:
      Key Features to Incorporate within Multifunctional Infrastructure
1613. Escobar-Valencia Esteban, Capet J., Brière J., Ferngau E. (2024-03)
      Hydraulic and Geotechnical Assessments of a Large 3D Printed Artificial Reef in Sands
1614. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2024-03)
      Printability and Inter-Layer Bonding Property of 3D Printed Fiber-Reinforced Geopolymer
1615. Zhu Lingli, Zhao Wanting, Zhao Yu, Guan Xuemao (2024-03)
      Mechanism Analysis of Rheological Properties of 3D Printed Steel-Slag Cementitious Composite Based on Low-Field Nuclear-Magnetic-Relaxation-Test
1616. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
      Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
      Insights from the Excess-Paste-Theory
1617. Latorraca Tássia, Guimarães Ana, Rangel Bárbara (2024-03)
      Bibliometric Analysis of Personalized 3D Printed Concrete-Based Modules for Construction:
      Leveraging the Ordinatio Method
1618. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen et al. (2024-03)
      Thermal Network Model for Anisotropic Heat Transfer in 3D Printed Complex Geometry Structures
1619. Du Guoqiang, Sun Yan, Qian Ye (2024-03)
      Flexural Performance of Nature-Inspired 3D Printed Strain-Hardening Cementitious Composites with Bouligand Structures
1620. Barjuei Erfan, Capitanelli Alessio, Bertolucci Riccardo, Courteille Eric et al. (2024-03)
      Digital Workflow for Printability Checking and Prefabrication in Robotic Construction 3D Printing Based on Artificial Intelligence Planning
1621. Shahzad Qamar, Abbas Nadeem, Akbar Muhammad, Sabi Ehab et al. (2024-03)
      Influence of Print-Speed and Nozzle-Diameter on the Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete
1622. Sun Junbo, Liu Shukui, Ma Zhangguo, Wang Di et al. (2024-03)
      3D Printed Lightweight Concrete Containing Surface-Pretreated Coal-Gangue
1623. Moghayedi Alireza, Mahachi Jeffrey, Lediga Refilwe, Mosiea Tshepang et al. (2024-03)
      Revolutionizing Affordable Housing in Africa:
      A Comprehensive Technical and Sustainability Study of 3D Printing Technology
1624. Labuda Igor, Pugliese Federica, Dzwierzynska Jolanata (2024-03)
      An Innovative Concept for 3D Sand-Printed Sustainable Refugee Shelters in a Sandy Desert in a Hot and Dry Climate
1625. Souza Eduarda, Ribeiro Borges Paulo, Stengel Thorsten, Nematollahi Behzad et al. (2024-03)
      3D Printed Sustainable Low-Cost Materials for Construction of Affordable Social Housing in Brazil:
      Potential, Challenges, and Research Needs
1626. Curth Alexander, Pearl Natalie, Castro-Salazar Angelica, Mueller Caitlin et al. (2024-03)
      3D Printing Earth:
      Local, Circular Material Processing, Fabrication Methods, and Life Cycle Assessment
1627. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
      Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
1628. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
      Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
1629. Tiwari Adarsh, Pratapa Phanisri, Santhanam Manu (2024-03)
      Lattice Concrete:
      3D Printed Periodic Cellular Structures Through Selective Cement-Hydration
1630. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
      Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
      Characteristics and Influences of Superplasticizer and Water-Binder Ratio
1631. Wijaya Ignasius, Kreiger Eric, Masud Arif (2024-03)
      Modeling of Concrete Printing Process with Frictional Interface
1632. Ivaniuk Egor, Mechtcherine Viktor (2024-03)
      Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing
1633. Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
      Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials
1634. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
      Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
1635. Alhussain Ali, Duarte José, Brown Nathan (2024-02)
      Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing
1636. Ziada Mahmoud, Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-02)
      Bacteria-Based Crack-Healing of 3D Printed PVA-Fiber-Reinforced Geopolymer Mortars
1637. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
      Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
      A Comprehensive Study on Operational and Material Parameters
1638. Wu Dinglue, Luo Qiling, Long Wujian, Zhang Shunxian et al. (2024-02)
      Advancing Construction 3D Printing with Predictive Inter-Layer Bonding Strength:
      A Stacking Model Paradigm
1639. Nan Cristina, Vigorito Alessio (2024-02)
      Exploring 3D Concrete Printing of Lattice Structures on Robotically-Shaped Sand Formwork for Circular Futures
1640. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-02)
      Concrete 3D Printing Technology in Sustainable Construction:
      A Review on Raw Materials, Concrete Types and Performances
1641. Giudice Lorenzo, Katsamakas Antonios, Liu Bowen, Sarhosis Vasilis et al. (2024-02)
      Physical Modelling of Unreinforced Masonry Walls Using a Sand-Based 3D Printer
1642. Ding Tao, Shen Kaige, Cai Chen, Xiao Jianzhuang et al. (2024-02)
      3D Printed Concrete with Sewage Sludge Ash:
      Fresh and Hardened Properties
1643. Moraes Maria, Nagata Ester, Duran Afonso, Rossignolo João (2024-02)
      Alkali-Activated Materials Applied in 3D Printing Construction:
      A Review
1644. Wang Xingjian, Naito Clay, Fox John, Bocchini Paolo (2024-02)
      Impact of Mix Proportions on Particle-Bed 3D Printed Concrete Properties
1645. Silveira Marcos, Wagner Juliana, Khanverdi Mohsen, Das Sreekanta (2024-02)
      Structural Performance of Large-Scale 3D Printed Walls Subjected to Axial Compression Load
1646. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-02)
      Bond-Slip Behavior of Textile-Reinforcement in 3D Printed Concrete
1647. Geng Songyuan, Luo Qiling, Cheng Boyuan, Li Lixao et al. (2024-02)
      Intelligent Multi-Objective Optimization of 3D Printing Low-Carbon Concrete for Multi-Scenario Requirements
1648. Zeng Jun-Jie, Yan Zitong, Jiang Yuan, Li Pei-Lin (2024-02)
      3D Printing of FRP Grid and Bar Reinforcement for Reinforced Concrete Plates:
      Development and Effectiveness
1649. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
      Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
1650. Zhang Hanghua, Tan Yanke, Hao Lucen, Zheng Shipeng et al. (2024-02)
      Intelligent Real-Time Quality-Control for 3D Printed Concrete with Near-Nozzle Secondary-Mixing
1651. Zhao Guoqi, Fan Yichang, Tang Can, Wei Yuanyuan et al. (2024-02)
      Preparation and Compressive Properties of Cementitious Composites Reinforced by 3D Printed Cellular Structures with a Negative Poisson's Ratio
1652. Gündüz Gamze, Özkar Mine (2024-02)
      A Process-Based Framework for Adaptable Modules in Robotic Clay 3D Printing
1653. Gamage Kumari, Fawzia Sabrina, Zahra Tatheer, Teixeira Muge et al. (2024-02)
      Advancement in Sustainable 3D Concrete Printing:
      A Review on Materials, Challenges, and Current Progress in Australia
1654. Susmel Luca (2024-02)
      Theory of Critical Distances and Notched Filament-Based 3D Printed Components:
      Lessons Learned from Polymers and Concrete
1655. Nóbrega Anna, Queiroz Junior Cleanto, Souza Wendell, Cabral Kleber et al. (2024-02)
      Computational Modeling for Structural Element Analysis Using Cement Composites in 3D Printing
1656. Perales-Santillan M., Díaz-Aguilera Jorge, Mendoza-Rangel Jose (2024-02)
      Evaluation of the Rheological Behavior for Alkaline-Activated Cements of Metakaolin and Limestone for Its Potential Application in 3D Printing
1657. Zhou Wen, Zhu He, Hu Wei-Hsiu, Wollaston Ryan et al. (2024-02)
      Low-Carbon, Expansive Engineered Cementitious Composites (ECC) In the Context of 3D Printing
1658. Ahi Oğulcan, Ertunç Özgür, Bundur Zeynep, Bebek Özkan (2024-02)
      Automated Flow-Rate-Control of Extrusion for 3D Concrete Printing Incorporating Rheological Parameters
1659. Zhou Longfei, Gou Mifeng, Ji Jiankai, Hou Xinran et al. (2024-02)
      Durability and Hardened Properties of 3D Printed Concrete Containing Bauxite-Tailings
1660. Jiang Xiongzhi, Li Yujia, Yang Zhe, Li Yangbo et al. (2024-02)
      Harnessing Path-Optimization to Enhance the Strength of Three-Dimensional Printed Concrete
1661. Sergis Vasileios, Ouellet-Plamondon Claudiane (2024-02)
      Algorithmic Mix-Design for 3D Printing Materials
1662. Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
      Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths
1663. Nguyen Vuong, Tran Jonathan, Liu Junli, Tran Mien et al. (2024-02)
      Extended Finite Element Multi-Scale Modelling for Crack Propagation in 3D Printed Fiber-Reinforced Concrete
1664. Li Weihong, Chen Xuhao, Wang Yaoyu, Wan Detian et al. (2024-02)
      Effect of Embedded Filament Fibers on Mechanical Properties of 3D Printing Cement-Based Materials
1665. Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
      FloatArch:
      A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization
1666. Yang Min, Li Chao, Liu Hao, Huo Longfei et al. (2024-02)
      Exploring the Potential for Carrying Capacity and Reusability of 3D Printed Concrete Bridges:
      Construction, Dismantlement, and Reconstruction of a Box Arch Bridge
1667. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
      The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
      Numerical Modeling and Experimental Validation
1668. Mengistu Girum, Nemes Rita (2024-01)
      Recycling 3D Printed Concrete Waste for Normal Strength Concrete Production
1669. Delavar Mohammad, Chen H., Sideris Petros (2024-01)
      Analysis and Design of 3D Printed Reinforced Concrete Walls Under In-Plane Quasi-Static Loading
1670. Bianchi Iacopo, Volpe Stelladriana, Fiorito Francesco, Forcellese Archimede et al. (2024-01)
      Life Cycle Assessment of Building Envelopes Manufactured Through Different 3D Printing Technologies
1671. Panțiru Alexandru, Luca Bogdan, Bărbuța Marinela (2024-01)
      Investigations Regarding Concrete Mixes Suitable for 3D Printing
1672. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
      Towards Full Automation in 3D Concrete Printing Construction:
      Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
1673. Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
      A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
1674. Buson Márcio, Varum Humberto, Rezende Marco (2024-01)
      First Impressions on Three-Dimensional Printing with Earth-Based Mortar at the Faculty of Engineering of the University of Porto
1675. Polychronopoulos Nickolas, Sarris Ioannis, Vlachopoulos John (2024-01)
      Flow-Analysis of Screw-Extrusion in Three-Dimensional Concrete Printing
1676. Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
      Spray-Based 3D Concrete Printing-Parameter Design-Model:
      Actionable Insight for High Printing Quality
1677. Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
      Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
      A Review
1678. Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
      A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
1679. Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
      Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures
1680. Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
      Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
1681. Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
      Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete
1682. Yu Hao, Zhang Weiwei, Yin Binbin, Sun Weikang et al. (2024-01)
      Modeling Extrusion-Process and Layer-Deformation in 3D Concrete Printing via Smoothed Particle-Hydrodynamics
1683. Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
      Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
1684. Dong Wei, Wang Junfeng, Hang Meiyan, Qu Shuqiang (2024-01)
      Research on Printing Parameters and Salt-Frost-Resistance of 3D Printing Concrete with Ferrochrome-Slag and Aeolian Sand
1685. Wang Qinghua, Xu Jinggang, Feng Duo, Li Wei et al. (2024-01)
      Properties and Printability Evaluation of Three-Dimensional Printing Magnesium-Oxychloride Cement by Fully Utilizing Aeolian-Sand
1686. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
      Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
1687. Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
      A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
1688. Zhu Ronghua, Egbe King-James, Salehi Hadi, Shi Zhongtian et al. (2024-01)
      Eco-Friendly 3D Printed Concrete with Fine Aggregate Replacements:
      Fabrication, Characterization and Machine Learning Prediction
1689. Liu Qiong, Cheng Shengbo, Peng Bin, Chen Kailun et al. (2024-01)
      The Buildability and Flexural Properties of 3D Printed Recycled Mortar Reinforced with Synchronized Steel-Cable Under Different Reinforcement Ratios
1690. Rogers Helen, Srivastava Mohit, Tsakou Myriam-Elissavet, Prashad Anisha (2024-01)
      Sustainable Supply Chain Models for 3D Printed Houses
1691. Sedghi Reza, Rashidi Kourosh, Hojati Maryam (2024-01)
      Large-Scale 3D Wall Printing:
      From Concept to Reality
1692. Zhang Nan, Sanjayan Jay (2024-01)
      Quick Nozzle Mixing Technology for 3D Printing Foam-Concrete
1693. Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
      Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
1694. Gong Lei, Yuan Philip (2024-01)
      ISOMORPHISM:
      Stylized Translations of 2D Prototype in Additive Clay Printing
1695. Duan Zhenhua, Deng Qi, Xiao Jianzhuang, Lv Zhenyuan et al. (2024-01)
      Experimental Realization on Stress-Distribution Monitoring During 3D Concrete Printing
1696. Meere Hani, Yan Shuaxing, Wang Dongpo, Bi Yuzhang (2024-01)
      Behavior of Traditional Concrete Dams and Three-Dimensional Printed Concrete Dams Under the Debris Flow Impact
1697. Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
      Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
1698. Raza Saim, Triantafyllidis Zafiris, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-01)
      Seismic Performance of Fe-SMA Pre-Stressed Segmental Bridge Columns with 3D Printed Permanent Concrete Formwork
1699. Westerlind Helena, Vargas José, Silfwerbrand Johan (2024-01)
      Towards the Application of Mesostructures in 3D Concrete Printing:
      Evaluating Load-bearing Performance
1700. Neri Manuela, Licciardello Lucia, Reggia Adriano, Pilotelli M. et al. (2024-01)
      Improving the Energy Performance of a 3D Printed Wall Using Recycled Material
1701. Lucen Hao, Long Li, Shipeng Zhang, Huanghua Zhang et al. (2023-12)
      The Synergistic Effect of Greenhouse Gas CO2 and Silica-Fume on the Properties of 3D Printed Mortar
1702. Pham Thi, Trinh Duy, Do Trong, Huang Jie (2023-12)
      Flexural Behavior of Printed Concrete Wide Beams with Dispersed Fibers-Reinforced
1703. Khan Shayan, Ghazi Syed, Amjad Hassan, Imram Muhammad et al. (2023-12)
      Emerging Horizons in 3D Printed Cement-Based Materials with Nano-Material-Integration:
      A Review
1704. Ruitinga Volker, Avramiea Emma (2023-12)
      Custom-Made Print-Heads Empowering 3D Printed Concrete:
      Innovations in Digital Design and Fabrication of Complex Prefabricated Elements
1705. Li Feng, Zhang Rongrong, Zhou Siqi, Zhu Xingyi (2023-12)
      Printability and Hardening Performance of Three-Dimensionally-Printed Geopolymer Based on Lunar Regolith Simulant for Automated Construction of Lunar Infrastructure
1706. Li Haodao, Addai-NImoh Alfred, Kreiger Eric, Khayat Kamal (2023-12)
      Methodology to Design Eco-Friendly Fiber-Reinforced Concrete for 3D Printing
1707. Fahim Abdullah, Admassu Natnael, Dailey Garret, Moradllo Mehdi (2023-12)
      Application of Cellulose-Nano-Crystals in 3D Printed Alkali-Activated Cementitious Composites
1708. Alyami Mana, Khan Majid, Javed Muhammad, Ali Mujahid et al. (2023-12)
      Application of Metaheuristic Optimization Algorithms in Predicting the Compressive Strength of 3D Printed Fiber-Reinforced Concrete
1709. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
      Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
1710. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
      Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
1711. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
      Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
1712. Vasilić Ksenija (2023-12)
      Standardization Aspects of 3D Printing with Concrete
1713. Yan Zitong, Zeng Jun-Jie, Zhuge Yan, Liao Jinjing et al. (2023-12)
      Compressive Behavior of FRP-Confined 3D Printed Ultra-High-Performance Concrete Cylinders
1714. Yang Yan, Wu Hangzi, Han Lifang, Huang Qingling et al. (2023-12)
      Investigation on Geometric and Surface Finish Quality of 3D Concrete Printed Walls with Hollow Section
1715. Liu Qiang, Jiang Quan, Yu Rang, Rong Yao et al. (2023-12)
      Extrusion 3D Printing Circular and Horseshoe Tunnel Physical Models:
      A Comparative Study of Deformation and Brittle Failure
1716. Natanzi Atteyeh, McNally Ciaran (2023-12)
      Experimental Investigation of Low-Carbon 3D Printed Concrete
1717. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2023-12)
      3D Concrete Printing in Air and Under Water:
      A Comparative Study on the Buildability and Inter-Layer Adhesion
1718. Christ Julian, Perrot Arnaud, Ottosen Lisbeth, Koss Holger (2023-12)
      Rheological Characterization of Temperature-Sensitive Biopolymer-Bound 3D Printing Concrete
1719. Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
      Mechanical Properties of 3D Printed Concrete Components:
      A Review
1720. Li Yeou-Fong, Tsai Pei-Jen, Syu Jin-Yuan, Lok Man-Hoi et al. (2023-12)
      Mechanical Properties of 3D Printed Carbon Fiber-Reinforced Cement Mortar
1721. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
      Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
1722. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
      Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
      A Review
1723. Dey Dhrutiman, Nguyen Vuong, Nguyen-Xuan Hung, Srinivas Dodda et al. (2023-12)
      Flexural Performance of 3D Printed Concrete Structure with Lattice-Infills
1724. Freund Niklas, David Martin, Böhler David, Mai (née Dressler) Inka et al. (2023-12)
      Shotcrete 3D Printing:
      Interaction of Nozzle Geometry, Homogeneity and Hardened Concrete Properties
1725. Eugenin Claudia, Cuevas Villalobos Karla, Navarrete Iván (2023-12)
      Temperature-Dependance of 3D Printed Concrete Produced with Copper-Tailings
1726. Böhler David, Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
      Shotcrete 3D Printing:
      Effect of Material‐Process-Interaction on the Global and Local Material Density
1727. Coward Andy, Sørensen Jesper (2023-12)
      3D Printed Concrete Beams as Optimised Load Carrying Structural Elements:
      The Minimass Beam
1728. Remke Sebastian, Sant Gaurav, Gädt Torben (2023-12)
      Investigation of a Hybrid Binder System for Large-Scale 3D Printing
1729. Felfili Guimarães Gabriela, Oliveira Marcos, Almeida Martinelli Juliana (2023-12)
      Performance-Evaluation of the 3D Printing System Through Fault-Tree-Analysis-Method
1730. Wu Yuching, Chen Huaikun, Zhi Peng, Zhu Peng et al. (2023-12)
      Effect of 3D Printing Geometrical Monocline on Behaviors of Curved Timoshenko Beams Based on Isogeometric Analyses
1731. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
      Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
1732. Khalilidermani Mitra, Knez Dariusz (2023-12)
      A Survey on Extraterrestrial Habitation Structures with a Focus on Energy-Saving 3D Printing Techniques
1733. Qamar Mu'ath, Yaghmour Emad, Wang Xingjian, Naito Clay et al. (2023-12)
      Use of 3D Printed Concrete Components for Thermal Energy Storage
1734. Calderon-Cordova Carlos, Sarango Leonardo, Chamba Dennis, Sarango Roger et al. (2023-12)
      Performance-Analysis of Motion-Control-Algorithms of an Industrial-Robot-Arm Applied to 3D Concrete Printing Systems
1735. Pessoa Ana Sofia, Jesus Manuel, Rangel Carolina, Guimarães Ana et al. (2023-12)
      Preliminary Study of the Application of Thermal Mortar in 3D Printed Concrete Walls
1736. Acuña Tomás, Avendaño Martín, García-Alvarado Rodrigo, Banda Pablo et al. (2023-12)
      Parametric Design of Multipurpose 3D Printed Walls Based on Roberto Matta´s Drawings
1737. Nóbrega Thiers, Henriques Gonçalo, Passaro Andres (2023-12)
      3D Printing for Architecture:
      Organic Integration of Algorithm, Machine and Material-Paste-Manufacture
1738. Pazols Maximiliano, Raspall Félix (2023-12)
      Terra Fibrosum:
      Continuous Fibers Reinforcement System for Robotized 3D Printing with Earth for Architecture
1739. Vargas José (2023-12)
      Spatially Graded Modeling:
      An Integrated Workflow For 3D Concrete Printing
1740. Alyami Mana, Khan Majid, Fawad Muhammad, Nawahz R. et al. (2023-11)
      Predictive Modeling for Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Machine Learning Algorithms
1741. Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
      BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
1742. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2023-11)
      Constitutive Response and Failure Progression in Digitally Fabricated 3D Printed Concrete Under Compression and Their Dependence on Print Layer-Height
1743. Peralta Abadi Patricia, Ahmad Muhammad, Smarsly Kay (2023-11)
      Printing-Information-Modeling for Additive Manufacturing of Concrete Structures
1744. Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2023-11)
      Propelling the Widespread Adoption of Large-Scale 3D Printing
1745. Bedarf Patrick, Szabó Anna, Zanini Michele, Dillenburger Benjamin (2023-11)
      Robotic 3D Printing of Geopolymer Foam for Lightweight and Insulating Building Elements
1746. Põldaru Mattias, Tammkõrv Karl, Tusik Tanel, Kiviste Mihkel et al. (2023-11)
      The Effect of Printing-Direction on the Strength Characteristics of a 3D Printed Concrete Wall-Section
1747. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2023-11)
      Development of a Prototype Concept for Using 3D Concrete Printing in Pavement Construction
1748. Wang Xianlin, Banthia Nemkumar, Yoo Doo-Yeol (2023-11)
      Reinforcement Bond Performance in 3D Concrete Printing:
      Explainable Ensemble Learning Augmented by Deep Generative Adversarial Networks
1749. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
      Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
1750. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-11)
      Adaptive Estimation and Detection of Filament-Width-Deviation During 3D Robotic Printing of Construction Materials
1751. Li Long, Hao Lucen, Li Xiao-Sheng, Xiao Jianzhuang et al. (2023-11)
      Development of CO2-Integrated 3D Printing Concrete
1752. Vignesh B., Parthasarathi N. (2023-11)
      Analytical Study on 3D Printed Concrete Wall with Different Wall-Configurations When Exposed to High Temperature
1753. Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
      Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar
1754. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-11)
      Slag-Modified Metakaolin-Based 3D Printed Geopolymer:
      Mechanical Characterisation, Microstructural Properties, and Nitrogen Physisorption Pore-Analysis
1755. Wu Hao, Li Yu, Xie Xingje, Gao Xiaofan et al. (2023-11)
      Structural Performance-Based 3D Concrete Printing for an Efficient Concrete Beam
1756. Liu Qiong, Cheng Shengbo, Sun Chang, Chen Kailun et al. (2023-11)
      Steel-Cable Bonding in Fresh Mortar and 3D Printed Beam Flexural Behavior
1757. Jauk Julian, Vašatko Hana, Gosch Lukas, Ristoski Kristijan et al. (2023-11)
      Coextrusion of Clay-Based Composites:
      Using a Multi-Material Approach to Achieve Gradient Porosity in 3D Printed Ceramics
1758. Burger Joris, Lloret-Fritschi Ena, Akerman Marc, Schwendemann Daniel et al. (2023-11)
      Circular Formwork:
      Recycling of 3D Printed Thermoplastic Formwork for Concrete
1759. Chernysheva Natalia, Shatalova Svetlana, Lesovik Valeriy, Kozlov Pavel (2023-11)
      Deformation Characteristics of Dense and Foamed Mortars Based on Cement and Gypsum-to-Cement Binders for 3D Printing
1760. Dimitriou Savvas, Kontovourkis Odysseas (2023-11)
      Force-Flow Based 3D Printing of Structural Elements Inspired by the Traditional Architecture of Cross-Vaults
1761. Diniz Nancy, Melendez Frank (2023-11)
      Myco Clay:
      3D Printing Mycelium and Clay Biocomposites
1762. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
      Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
      Proposal for an Innovative and Sustainable Construction System
1763. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
      An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
1764. Maierdan Yierfan, Armistead Samuel, Mikofsky Rebecca, Huang Qiqi et al. (2023-11)
      Rheology and 3D Printing of Alginate Bio-Stabilized Earth Concrete
1765. Wang Yu, Rodriguez Fabian, Olek Jan, Zavattieri Pablo et al. (2023-11)
      Influence of Type of Fibers on Fresh and Hardened Properties of Three-Dimensional-Printed Cementitious Mortars
1766. Bui Van-Bien, Pham Thi, Pham Duc, Do Thi (2023-11)
      Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1
1767. Lu Bing, Li Ziyang, Li Mingyang, Feng Jianhang et al. (2023-11)
      Substitution of Cement by Marine-Clay in Spray-Based 3D Concrete Printing
1768. Xu Ping, Chen Tianyu, Fan Kaijun, Zhang Minxia (2023-11)
      Effect of Nano-Silica-Sol Dosage on the Properties of 3D Printed Concrete
1769. Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
      Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
1770. Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
      Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections
1771. Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
      Advancing 3D Concrete Printing for Affordable Housing:
      A Shape Grammar-Based Approach to Print Spanning-Roof Structures
1772. Fu Yanan, Zhang Ying, Wu Lei (2023-11)
      Experimental Study on Structural Performance of Cast-in-Place Frame Printed Concrete Wall
1773. Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
      Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
1774. Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
      Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing
1775. Sangiorgio Valentino, Parisi Fabio, Graziano Angelo, Tina Giosmary et al. (2023-11)
      3D Printing of Viscous Materials in Construction:
      New Design Paradigm, from Small Components to Entire Structures
1776. An Dong, Zhang Yixia, Yang Chunhui (2023-11)
      Numerical Modelling of 3D Concrete Printing:
      Material-Models, Boundary-Conditions and Failure-Identification
1777. Tamimi Adil, Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Alhaidary Haidar et al. (2023-11)
      Thermal Performance of 3D Concrete Printed Walls:
      Calculated and In-Situ Measured U-Values
1778. Bhusal Shiva, Sedghi Reza, Hojati Maryam (2023-11)
      Evaluating the Printability and Rheological and Mechanical Properties of 3D Printed Earthen Mixes for Carbon-Neutral Buildings
1779. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
      A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
      Material-Preparation, Construction-Process and Structure-Level
1780. Tong Jiaqi, Ding Yahong, Lv Xiuwen, Ning Wei (2023-11)
      Effect of Carbonated Recycled Coarse Aggregates on the Mechanical Properties of 3D Printed Recycled Concrete
1781. Gao Huaxing, Chen Yuxuan, Chen Qian, Yu Qingliang (2023-11)
      Thermal and Mechanical Performance of 3D Printing Functionally Graded Concrete:
      The Role of SAC on the Rheology and Phase Evolution of 3DPC
1782. Zou Mengtong, Liu Chuanbei, Zhang Keying, Li Wuqian et al. (2023-11)
      Evaluation and Control of Printability and Rheological Properties of 3D Printed Rubberized Concrete
1783. Jesus Manuel, Teixeira João, Alves Jorge, Pessoa Ana Sofia et al. (2023-10)
      Potential Use of Sugarcane-Bagasse-Ash in Cementitious Mortars for 3D Printing
1784. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2023-10)
      Geopolymer Mortars for Use in Construction 3D Printing:
      Effect of LSS, Graphene-Oxide and Nano-Clay at Different Environmental Conditions
1785. Parisi Nicola (2023-10)
      New Directions of 3D Printed Earth Architecture
1786. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2023-10)
      The Effect of Curing Conditions on the Service Life of 3D Printed Concrete Formwork
1787. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-10)
      Mechanical Strengths and Optical Properties of Translucent Concrete Manufactured by Mortar-Extrusion 3D Printing with Polymethyl-Methacrylate Fibers
1788. Imram Ramsha, Rashid Ans, Khan Shoukat, İlcan Hüseyin et al. (2023-10)
      Buildability-Analysis on Squared Profile Structure in 3D Concrete Printing
1789. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
      Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
      Rheological and Quasi-Static Mechanical Characteristics
1790. Miranda Luiza, Jovanović Balša, Lesage Karel, Schutter Geert (2023-10)
      Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective
1791. Placzek Gerrit, Schwerdtner Patrick (2023-10)
      From Process to System:
      A Review on the Implications of Concrete 3D Printing on Project Delivery
1792. Zhou Yi, Althoey Fadi, Alotaibi Badr, Gamil Yaser et al. (2023-10)
      An Overview of Recent Advancements in Fiber-Reinforced 3D Printing Concrete
1793. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
      An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
1794. Tay Yi, Lim Sean, Phua Seng, Tan Ming et al. (2023-10)
      Exploring Carbon-Sequestration-Potential Through 3D Concrete Printing
1795. Markin Slava, Mechtcherine Viktor (2023-10)
      The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements
1796. Markin Slava, Cordova Julian, Mechtcherine Viktor (2023-10)
      Evolution of Capillary Pressure in 3D Printed Concrete Elements:
      Numerical Modelling and Experimental Validation
1797. Yang In-Hwan, Bui The, Park Jihun, Jeong Seung-Tae (2023-10)
      A Feasibility Study on the Lateral Behavior of a 3D Printed Column for Application in a Wind Turbine Tower
1798. Skripkiūnas Gintautas, Girskas Giedrius, Rishko Lyudmyla (2023-10)
      Lightweight Portland Cement Mixtures with Perlite for 3D Printing of Concrete Structures
1799. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
      Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
      Experimental and Numerical Studies
1800. Kumar Lalit, Panda Biranchi, Muthu Nelson (2023-10)
      A Simple Potential Energy Formulation for 3D Concrete Printed Structures Considering the Shear Effects in the Build-Direction
1801. Zhang Xiaowei, Guo Chuwen, Ma Jianhong, Jiao Huazhe et al. (2023-10)
      Utilization of Solid Mine-Waste in the Building Materials for 3D Printing
1802. Christ Julian, Leusnik Sander, Koss Holger (2023-10)
      Multi-Axial 3D Printing of Biopolymer-Based Concrete Composites in Construction
1803. Pi Yilin, Lu Cong, Li Baoshan, Zhou Junhui (2023-10)
      Crack Propagation and Failure Mechanism of 3D Printing Engineered Cementitious Composites (3DP-ECC) Under Bending Loads
1804. Lu Bing, Zhao Huanyu, Li Mingyang, Wong Teck et al. (2023-10)
      MgO/Fluid Catalytic Cracking Ash-Blends for 3D Printing on Vertical Surfaces
1805. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
      Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
      Case Study of a Spiral Staircase
1806. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
      From Soil to Printed Structures:
      A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
1807. Li Zhuming, Aslani Farhad (2023-10)
      Performance of 3D Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method
1808. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-10)
      Investigating PCM Encapsulated NaOH Additive for Set-on-Demand in 3D Concrete Printing
1809. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2023-10)
      In-Process Integration of Reinforcement for Construction Elements During Shotcrete 3D Printing
1810. Dittel Gözdem, Scheurer Martin, Evers Clara, Meyer-Brötz Fabian et al. (2023-10)
      Structural Performance of Textile Reinforced 3D Printed Concrete Elements
1811. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2023-10)
      3D Printing of Continuous-Fibers Cementitious Composites:
      Anisotropic 3D Mortar
1812. Freund Niklas, Dörrie Robin, David Martin, Kloft Harald et al. (2023-10)
      Enclosing Reinforcement Structures in Shotcrete 3D Printing:
      The Effect of Reinforcement Geometry and Accelerator Dosage on the Formation of Voids
1813. Auer Daniel, Bos Freek, Olabi Mohammad, Fischer Oliver (2023-10)
      Fiber-Reinforcement of 3D Printed Concrete by Material-Extrusion-Tool-Paths Aligned to Principal Stress-Trajectories
1814. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
      Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
      Impact on 3D Printing Performance and Material-Properties
1815. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
      Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
      A Sustainable Approach for Construction Materials
1816. Ebadi-Jamkhaneh Mehdi, Kontoni Denise-Penelope, Ebrahimi Amir (2023-10)
      Three-Dimensional Printing of Structural Members with Shotcrete Technique:
      Design, Construction, and Future Directions
1817. Chen Yuning, Xia Kailun, Jia Zijian, Gao Yueyi et al. (2023-10)
      Extending Applicability of 3D Printable Geopolymer to Large-Scale Printing Scenario via Combination of Sodium Carbonate and Nano-Silica
1818. Pan Tinghong, Guo Rongxin, Fu Chaoshu, Ji Xuping et al. (2023-10)
      Extrusion-Based 3D Concrete Printing with Different Flow-Direction
1819. Akman Arabella, Sadhu Ayan (2023-10)
      Recent Development of 3D Printing Technology in Construction Engineering
1820. Oosthuizen Jandré, Babafemi Adewumi, Walls Richard (2023-10)
      3D Printed Recycled Plastic Eco-Aggregate (Resin8) Concrete
1821. Lyu Qifeng, Dai Pengfei, Zong Meirong, Zhu Pinghua et al. (2023-10)
      Plant-Germination Ability and Mechanical Strength of 3D Printed Vegetation Concrete Bound with Cement and Soil
1822. Kurniati Eka, Kim Heejeong (2023-10)
      Utilizing Industrial Byproducts for Sustainable Three-Dimensional-Printed Infrastructure Applications:
      A Comprehensive Review
1823. Sun Houchao, Li Furong, Shi Feiting (2023-10)
      Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
1824. Suryanto Benny, Higgins J., Aitken M., Tambusay Asdam et al. (2023-10)
      Developments in Portland Cement/GGBS Binders for 3D Printing Applications:
      Material-Calibration and Structural Testing
1825. Rui Aoyu, Wang Li, Lin Wenyu, Ma Guowei (2023-10)
      Experimental Study on Damage Anisotropy of 3D Printed Concrete Exposed to Sulfate-Attack
1826. Sedghi Reza, Zafar Muhammad, Hojati Maryam (2023-10)
      Exploring Fresh and Hardened Properties of Sustainable 3D Printed Lightweight Cementitious Mixtures
1827. Lv Zhenyuan, Xiao Jianzhuang, Duan Zhenhua, Tang Yuxiang (2023-09)
      Time-Dependent Evolution and Strength Modulation of 3D Printed Concrete Pore-Structure Based on Microbial Remediation
1828. Li Shuai, Lan Tian, Mendis Priyan, Tran Jonathan (2023-09)
      Robotics in 3D Concrete Printing:
      Current Progress & Challenges
1829. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
      Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
1830. David Martin, Freund Niklas, Dröder Klaus, Lowke Dirk (2023-09)
      The Effects of Nozzle-Diameter and Length on the Resulting Strand Properties for Shotcrete 3D Printing
1831. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2023-09)
      Automatic Detection and Isolation of Filament-Width-Deviation During 3D Printing of Recycled Construction-Material
1832. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
      A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
      From Analytical Modelling to Numerical Simulation
1833. Živković Milijana, Žujović Maša, Milošević Jelena (2023-09)
      Architectural 3D Printed Structures Created Using Artificial Intelligence:
      A Review of Techniques and Applications
1834. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
      Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
1835. Breseghello Luca, Talaei Ardeshir, Florenzano Daniele, Naboni Roberto (2023-09)
      Shape-Env:
      Camera-Enhanced Robotic Terrain-Shaping for Complex 3D Concrete Printing
1836. Zamani Alireza, Mohseni Alale, Çapunaman Özgüç (2023-09)
      Reconfigurable Formwork System for Vision-Informed Conformal Robotic 3D Printing
1837. Vele Jiří, Kurilla Lukáš, Achten Henri (2023-09)
      Improving Buildability of Overhangs of 3D Printed Objects Through Non-Planar Slicing Informed by Force-Flow-Analysis
1838. Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
      3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
      A Durable, Sustainable and Cost-Competitive Product?
1839. Conrad John, Spencer Lawson, Amador Robert, Linnehan Tyler et al. (2023-09)
      Concrete Printed Gyroid Column:
      A Structurally Optimized, Sand Layer Supported Printing Method
1840. Coskun Agit, Jensen Mads (2023-09)
      Integrating Additional Elements in Clay 3D Printing with Human Intervention
1841. Coward Andy, Sørensen Jesper (2023-09)
      MINIMASS:
      A New Approach for Low-Carbon, Low-Cost 3D Printed Concrete Beams
1842. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-09)
      Rapid Early-Age Strength Development of In-Line Activated Geopolymer for Concrete 3D Printing
1843. Saadati Farzaneh, Kani Ebrahim (2023-09)
      Phosphorous Slag-Based Geopolymer Cement Incorporate with Mullite for 3D Printing Application
1844. Chang Ze, Liang Minfei, He Shan, Schlangen Erik et al. (2023-09)
      Lattice-Modelling of Early-Age Creep of 3D Printed Segments with the Consideration of Stress-History
1845. Asensio Javier, Josa Irene, Monserrat Andrea, Fuente Albert (2023-09)
      3D‐Printed Concrete Footbridges:
      An Approach to Assess the Sustainability Performance
1846. Zhang Huan, Cao Shuai, Yilmaz Erol (2023-09)
      Polymer Shape Effect on Damage-Evolution, Internal Defects and Crack Propagation of 3D Printed Polymer-Based Cementitious Backfill
1847. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
      3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
1848. Jauk Julian, Gosch Lukas, Vašatko Hana, Königsberger Markus et al. (2023-09)
      Filament-Reinforced 3D Printing of Clay
1849. Liu Dawei, Zhang Zhigang, Zhang Xiaoyue, Chen Zhaohui (2023-09)
      3D Printing Concrete Structures:
      State of the Art, Challenges, and Opportunities
1850. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
      Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
1851. Bayat Hamid, Kashani Alireza (2023-09)
      Analysis of Rheological Properties and Printability of a 3D Printing Mortar Containing Silica-Fume, Hydrated Lime, and Blast-Furnace-Slag
1852. Yin Yunchao, Huang Jian, Wang Tiezhu, Yang Rong et al. (2023-09)
      Effect of Hydroxypropyl-Methylcellulose on Rheology and Printability of the First Printed Layer of Cement Activated Slag-Based 3D Printing Concrete
1853. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
      Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
1854. Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
      Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete
1855. Rymeš Jiří, Červenka Jan, Jendele Libor (2023-09)
      Material-Modelling and Simulation of 3D Concrete Printing Process
1856. Ingle Vaibhav, Prem Prabhat, Ramamurthy Vignesh, Ravichandran Darssni (2023-09)
      Acoustic Emission Characterization of 3D Printed Ultra-High-Performance Concrete Beams Under Bending
1857. Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
      Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete
1858. Saravanan Pradeep, Ramaswamy Ananth (2023-09)
      Numerical Investigation on Inter-Layer and Filament Fracture Behavior of 3D Printed Concrete
1859. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
      Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
1860. Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
      Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
1861. Li Te, Tier Laire (2023-09)
      Analysis of the Effect of Glass-Powder on the Printability of Cement-Based Materials for 3D Printing Using ImageJ
1862. Chang Ze, Liang Minfei, Chen Yu, Schlangen Erik et al. (2023-09)
      Does Early-Age Creep Influence Buildability of 3D Printed Concrete?:
      Insights from Numerical Simulations
1863. Mohsen Mohamed, Diseet Malak, Aburumman Mervat, Taha Ramzi et al. (2023-09)
      3D Printed Clay Enhanced with Graphene-Nano-Platelets for Sustainable and Green Construction
1864. Hu Hailong, Huang Jian, Wang Tiezhu, Manuka Mesfin et al. (2023-09)
      Impact of Calcium Sulfoaluminate Cement on Printability and Early Strength Development of a Slag-Based 3D Printing Cementitious Material
1865. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
      Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
      A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
1866. Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
      Solid Waste-Based Set-on-Demand 3D Printed Concrete:
      Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
1867. Polychronopoulos Nickolas, Sarris Ioannis, Benos Lefteris, Vlachopoulos John (2023-09)
      Pressure-Drop in Converging Flows in Three-Dimensional Printing of Concrete
1868. Ji Yameng, Poullain Philippe, Leklou Ali (2023-09)
      The Selection and Design of Earthen Materials for 3D Printing
1869. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
      Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
1870. Dörrie Robin, Freund Niklas, Herrmann Eric, Baghdadi Abtin et al. (2023-09)
      Automated Force-Flow-Oriented Reinforcement Integration for Shotcrete 3D Printing
1871. Lehr Leonard, Rasanani Mahdieh, Rasehorn Inken (2023-09)
      3D Concrete Printing of Wall Elements with Integrated Multifunctional Cavities
1872. Liu Xiaoshuang, Zou Yuxiao, Wu Yingxuan, Cui Dong et al. (2023-09)
      The Effect of U-Type Expanding Agent for Concrete (UEA) on the Microstructural and Mechanical Properties of Mortar Fabricated Through Alternate 3D Printing
1873. Thakur Manideep, Kulkarni Omkar, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
      Influence of Cold Joint on Fracture Behavior of 3D Printed Concrete
1874. Kulkarni Omkar, Thakur Manideep, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
      Evaluation of Tensile Behavior of 3D Printed Concrete Assemblies with Reinforcement
1875. Jendele Libor, Rymeš Jiří, Červenka Jan (2023-09)
      Optimizing Digital 3D Printing of Concrete Structures
1876. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
      Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
1877. Matos Ana (2023-09)
      Waste Marble Valorisation in 3D Cementitious Materials Printing
1878. Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-09)
      Non-Destructive Tests to Evaluate the Self-Healing Capacity for a 3D Printing ECC Material
1879. Mawas Karam, Maboudi Mehdi, Gerke Markus (2023-09)
      Filament Extraction in 3D Printing of Shotcrete Walls from Terrestrial Laser Scanner Data
1880. Shahzad Qamar, Li Fangyuan (2023-09)
      An Innovative Method for Buildability-Assessment of 3D Printed Concrete at Early-Ages
1881. Rudziewicz Magdalena, Maroszek Marcin, Góra Mateusz, Dziura Paweł et al. (2023-09)
      Feasibility Review of Aerated Materials Application in 3D Concrete Printing
1882. Mader Thomas, Schreter-Fleischhacker Magdalena, Shkundalova Olena, Neuner Matthias et al. (2023-09)
      Constitutive Modeling of Orthotropic Non-Linear Mechanical Behavior of Hardened 3D Printed Concrete
1883. Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
      Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
1884. Zuo Zibo, Corte Wouter, Huang Y., Zhang L. et al. (2023-08)
      Measurement of the Density of Formed Structures for Concrete 3D Printing
1885. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
      Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
      Effect of Operational- and Material-Oriented Parameters
1886. Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-08)
      Buildability Modeling of 3D Printed Concrete Including Printing-Deviation:
      A Stochastic Analysis
1887. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-08)
      Experimental Investigation of Fresh and Time-Dependent Rheological Properties of 3D Printed Cementitious Material
1888. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2023-08)
      A 2D Numerical Model of 3D Concrete Printing Including Thixotropy
1889. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-08)
      Nano-Modified Materials for New Construction Technologies:
      Self-Compacting and 3D Printing
1890. Geffrault Anatole, Bessaies-Bey Hela, Roussel Nicolas, Coussot Philippe (2023-08)
      Printing by Yield-Stress Fluid-Shaping
1891. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2023-08)
      A Systematic Review of Life Cycle Assessments of 3D Concrete Printing
1892. Yang Huashan, Che Yujun, Luo Jie (2023-08)
      Calcium Leaching of 3D Printed Cement-Paste Exposed to Ammonium Chloride Solutions
1893. Matos Paulo, Zat Tuani, Lima Marcelo, Neto José et al. (2023-08)
      Effect of the Superplasticizer-Addition Time on the Fresh Properties of 3D Printed Limestone-Calcined-Clay-Cement (LC³) Concrete
1894. Olczyk Norbert, Skibicki Szymon, Gierszewska Natalia (2023-08)
      3D Printed Mortar with High Alumina-Cement as Alternative Solution for Standard Materials Used for 3D Printing
1895. Paritala Spandana, Singaram Kailash, Bathina Indira, Khan Mohd et al. (2023-08)
      Rheology and Pumpability of Mix Suitable for Extrusion-Based Concrete 3D Printing:
      A Review
1896. Fragnito Andrea, Iasiello Marcello, Mauro Gerardo, Menna Costantino et al. (2023-08)
      Topology-Optimization to Design Innovative High Thermal Resistance 3D Printed Walls
1897. Nadoury Wegdan, Mohamed Ashraf (2023-08)
      Modelling the Temperature Gradient in 3D Concrete Printing
1898. Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
      Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
1899. Wang Yang, Qiu Liu-Chao, Hu Yan-Ye, Cheng Song-Gui et al. (2023-08)
      Influential Factors on Mechanical Properties and Microscopic Characteristics of Underwater 3D Printing Concrete
1900. Mogra Mihir, Asaf Ofer, Sprecher Aaron, Amir Oded (2023-08)
      Design-Optimization of 3D Printed Concrete Elements Considering Buildability
1901. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
      Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
1902. Zeng Jun-Jie, Li Pei-Lin, Yan Zitong, Zhou Jie-Kai et al. (2023-08)
      Behavior of 3D Printed HPC Plates with FRP-Grid-Reinforcement Under Bending
1903. Soares Augusto, Costa Hugo, Carmo Ricardo, Rodrigues Ana et al. (2023-08)
      Comprehensive Design Methodology for 3D Printing Mortars
1904. Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
      Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
1905. Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
      A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications
1906. Zhou Wen, McGee Wesley, Gökçe H., Li Victor (2023-08)
      A Bio-Inspired Solution to Alleviate Anisotropy of 3D Printed Engineered Cementitious Composites (3DP-ECC):
      Knitting/Tilting Filaments
1907. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2023-08)
      Experimental Study of the In-Situ Rebar-Splicing-Technique to Reinforce 3D Printed Concrete in Vertical Directions
1908. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
      Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
1909. Tabassum Toiba, Ahmad Mir Ajaz (2023-08)
      A Review of 3D Printing Technology:
      The Future of Sustainable Construction
1910. Wang Qing, Ren Xiaodan, Li Jie (2023-08)
      Damage-Rheology Model for Predicting 3D Printed Concrete Buildability
1911. Ramani Ayyagari, Chen Qian, Soto Borja (2023-08)
      Quantifying the Impact of Concrete 3D Printing on the Construction Supply Chain
1912. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
      Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
      Evaluating Fresh and Hardened Properties
1913. Hájková P., Soukup A., Kohout J., Kohoutová E. et al. (2023-08)
      Geopolymers for 3D Print
1914. Zhang Nan, Sanjayan Jay (2023-08)
      Surfactants to Enable Quick Nozzle Mixing in 3D Concrete Printing
1915. Du Longyu, Zhou Jiehang, Lai Jianzhong, Wu Kai et al. (2023-07)
      Effect of Pore-Structure on Durability and Mechanical Performance of 3D Printed Concrete
1916. Salah Husam, Mutalib Azrul, Kaish Amrul, Syamsir Agusril et al. (2023-07)
      Development of Ultra-High-Performance Silica-Fume-Based Mortar Incorporating Graphene-Nano-Platelets for 3D Concrete Printing Application
1917. Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
      Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials
1918. Pessoa Ana Sofia, Jesus Manuel, Guimarães Ana, Lucas Sandra et al. (2023-07)
      Experimental Characterisation of Hygrothermal Properties of a 3D Printed Cementitious Mortar
1919. Harbouz Ilhame, Rozière Emmanuel, Loukili Ahmed, Yahia Ammar (2023-07)
      Effect of the Structuration-Rate on Dimensional Stability and Mechanical Performance of 3D Printed Mortars
1920. Ghosh Debalina, Anleu Paula, Pape Yann, Ma Zhonggoue (2023-07)
      Effect of Inter-Layer-Time-Lapse and Workability-Retention on Printed Concrete Performance
1921. Yemesegen Eden, Memari Ali (2023-07)
      A Review of Experimental Studies on Cob, Hempcrete, and Bamboo Components and the Call for Transition Towards Sustainable Home Building with 3D Printing
1922. Ma Zongfang, Duan Ming, Liu Chao, Liu Huawei et al. (2023-07)
      Better Semantic Segmentation For 3D Printing Concrete Surface Pore Detection
1923. Zhu Lingli, Zhang Meng, Zhang Yaqi, Yao Jie et al. (2023-07)
      Research Progress on Shrinkage Properties of Extruded 3D Printed Cement-Based Materials
1924. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
      Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
1925. Bai Gang, Chen G., Li Rong, Wang Li et al. (2023-07)
      3D Printed Ultra-High-Performance Concrete:
      Preparation, Application, and Challenges
1926. Wang Hao, Jiang Minghui, Hang Meiyan, Zhou Gangming et al. (2023-07)
      Research on the Mechanical Properties and Frost-Resistance of Aeolian Sand 3D Printed Mortar
1927. Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
      Inter-Layer Adhesion of 3D Printed Concrete:
      Influence of Layer Stacked Vertically
1928. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2023-07)
      Rheology Characterization of 3D Printing Mortars with Nano-Clays and Basalt-Fibers
1929. Han Xiaoyu, Yan Jiachuan, Chen Tiefeng, Tang Boyang et al. (2023-07)
      Plastic Shrinkage of 3D Printed Concrete Under Different Self-Weight of Upper Layers
1930. Nguyen Ho, Thach Nguyen, Le Quang, Anh Yonghan (2023-07)
      A Review of Current Progress and Application of Machine Learning on 3D Printed Concrete
1931. Dang Thi, Tran Mien (2023-07)
      Variation of the Adhesion Between Concrete Printed Layers in a 3D Concrete Printed Structure
1932. Baldoceda Jordan, Silva Guido, Kim Suyeon, Ruiz Gaby et al. (2023-07)
      Preliminary Experimental Evaluation of Buildability Improvement Methods for Concrete for 3D Printing
1933. Silva Guido, Burgos Valeria, Ñañez Robert, Kim Suyeon et al. (2023-07)
      Soil-Cement Matrices for Additive Construction:
      3D Printing System Validation and Printing Tests
1934. Zhang Nan, Sanjayan Jay (2023-07)
      Mechanisms of Rheological Modifiers for Quick Mixing Method in 3D Concrete Printing
1935. Jacquet Yohan, Perrot Arnaud (2023-07)
      Sewing Concrete Device:
      Combining In-Line Rheology-Control and Reinforcement-System for 3D Concrete Printing
1936. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-07)
      Extrusion and Structural Build-Up of 3D Printing Cement-Pastes with Fly-Ash, Nano-Clay and VMAs
1937. Geng Songyuan, Long Wujian, Luo Qiling, Fu Junen et al. (2023-07)
      Intelligent Prediction of Dynamic Yield-Stress in 3D Printing Concrete Based on Machine Learning
1938. Mollah Md., Comminal Raphaël, Silva Wilson, Šeta Berin et al. (2023-07)
      Computational Fluid Dynamics Modelling and Experimental Analysis of Reinforcement-Bar-Integration in 3D Concrete Printing
1939. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
      Review of Advances in 3D Printing Technology of Cementitious Materials:
      Key Printing Parameters and Properties Characterization
1940. Sukontasukkul Piti, Maho Buchit, Komkham Sila, Pianfuengfoo Satharat et al. (2023-07)
      Precise Determination of Initial Printable Time for Cement Mortar 3D Printing Using a Derivative Method
1941. Ravula Risheek, Gatheeshgar Perampalam (2023-07)
      On the Thermal-Energy Performance of 3D Printed Concrete Wall Panels Designed with Varying Insulation Ratios
1942. Pott Ursula, Jakob Cordula, Dorn Tobias, Stephan Dietmar (2023-07)
      Investigation of a Shotcrete-Accelerator for Targeted Control of Material-Properties for 3D Concrete Printing Injection-Method
1943. Almomani Mohammed, Ababneh Nedal, Abdalla Khairedin, Shbeeb Nadim et al. (2023-07)
      Selecting the Best 3D Concrete Printing Technology for Refugee Camp’s Shelter Construction Using Analytical Hierarchy Process:
      The Case of Syrian Refugees in Jordan
1944. Kanyenze Simba, Joubert Dawid, Combrinck Riaan (2023-07)
      The Effect of Nanobubble Water on the Fresh Properties of Conventional Concrete and 3D Printing Concrete
1945. Ghasemi Alireza, Naser Mohannad (2023-07)
      Tailoring 3D Printed Concrete Through Explainable Artificial Intelligence
1946. Pillay Selicia, Walls Richard, Merwe Johann (2023-07)
      Conceptualising the Behavior of 3D Printed Concrete Structures in Fire
1947. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-07)
      Hardened Properties of 3D Printed Limestone-Calcined-Clay-Cement Concrete
1948. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2023-07)
      Design-Optimization Workflow for 3D Concrete Printing of Spanning Structures
1949. Duarte José, Duarte Gonçalo, Brown Nathan, Nazarian Shadi et al. (2023-07)
      Designing a Habitat for 3D Concrete Printing in Permafrost-Regions
1950. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2023-07)
      In-Situ Coating Technique for Rebar Installation for 3D Printed Reinforced Concrete
1951. Khan Shoukat, İlcan Hüseyin, Aminipour Ehsan, Şahin Oğuzhan et al. (2023-07)
      Buildability-Analysis on Effect of Structural Design in 3D Concrete Printing:
      An Experimental and Numerical Study
1952. Breseghello Luca, Hajikarimian Hamed, Jørgensen Henrik, Naboni Roberto (2023-07)
      3DLightBeam+:
      Design, Simulation, and Testing of Carbon-Efficient Reinforced 3D Concrete Printed Beams
1953. Balkhy Wassim, Bing Scott, Babidi Saad, Lafhaj Zoubeir et al. (2023-07)
      The Analysis of Lean Wastes in Construction 3D Printing:
      A Case Study
1954. Núñez Varillas Christoper, Regalado Espinoza Marck, Gago Gamboa Angela (2023-07)
      3D Printing:
      An Opportunity for the Sustainable Development of Building Construction
1955. Çapunaman Özgüç, Iseman Emily, Gürsoy Benay (2023-07)
      Material in the Loop Fabrication:
      A Vision-Based Adaptive Clay 3D Printing Workflow on Indeterminate Sand Surfaces
1956. Senthilnathan Shanmugaraj, Raphael Benny (2023-07)
      Quality Monitoring of Concrete 3D Printed Elements Using Computer-Vision-Based Texture Extraction Technique
1957. McCoy Andrew, Vieira Manuel, Oliveira Miguel, Yanamala Akhileswar et al. (2023-07)
      3D Concrete Printing:
      Factors Affecting the US and Portugal
1958. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
      Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
      A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
1959. Dell’Endice Alessandro, Bouten Sam, Mele Tom, Block Philippe (2023-07)
      Structural Design and Engineering of Striatus, an Unreinforced 3D Concrete Printed Masonry Arch Bridge
1960. Wang Fei, Hua Sudong, Chen Tingzhu, He Bijuan et al. (2023-07)
      Effect of Nano-Clay and PCE on the Buildability of Ultra-Fine Dredged Sand-Based 3D Printing Materials
1961. Bici Andjol, Yunitsyna Anna (2023-07)
      Analysis of 3D Printing Techniques for Building Construction:
      A Review
1962. Mousavi Seyed, Dehestani Mehdi (2023-07)
      On the Possibility of Using Waste-Disposable-Gloves as Recycled Fibers in Sustainable 3D Concrete Printing Using Different Additives
1963. Jaji Mustapha, Kamoru A., Zijl Gideon, Babafemi Adewumi (2023-07)
      Effect of Anisotropy on Permeability Index and Water-Absorption of 3D Printed Metakaolin-Based Geopolymer Concrete
1964. Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-07)
      Peridynamic Buildability-Analysis of 3D Printed Concrete Including Damage, Plastic Flow and Collapse
1965. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2023-07)
      An Open PLC-Based Robot-Control-System for 3D Concrete Printing
1966. Ghantous Rita, Evseeva Anastasiia, Dickey Brandon, Gupta Shashank et al. (2023-07)
      Examining Effect of Printing-Directionality on Freezing-and-Thawing Response of Three-Dimensional-Printed Cement-Paste
1967. Huang Shuyi, Xu Weiguo, Hu Hanyang (2023-06)
      Space-Filling and Print-Path-Generation-Methods for Large-Area 3D Concrete Printing Pavements
1968. Pott Ursula, Jakob Cordula, Wolf Julian, Stephan Dietmar (2023-06)
      Comparison of Physical and Physico-Chemical Methods for 3D Printing Application with the Focus on the Unconfined Uniaxial Compression-Test
1969. Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
      Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials
1970. Zohrabyan Vahan, Zöller Raphael, Gradic Simon, Braml Thomas (2023-06)
      Potential of 3D Printed Steel Fiber Reinforced Concrete Components for the Protection of Critical Infrastructure:
      Impact and Free-Fall Tests
1971. Zhang Dan, Ma Guowei, Guan Jingyuan, Wang Li et al. (2023-06)
      Cyclic Behavior of Unbonded Post-Tensioned Pre-Cast Segmental Concrete Columns Fabricated by 3D Printed Concrete Permanent Formwork
1972. Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
      Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
      A Detailed Review
1973. Alzarrad Ammar, Song Siyuan, Hatamleh Muhammad, Awolusi Ibukun et al. (2023-06)
      Guideline for Automated Construction of Reinforced Concrete Beams Using 3D Printing and BIM
1974. Martin Michael, Banijamali Kasra, Kazemian Ali (2023-06)
      Reality-Capture Technologies for Automated Quality-Control During Construction 3D Printing
1975. Jesus Manuel, Pessoa Ana Sofia, Guimarães Ana, Rangel Bárbara et al. (2023-06)
      A Reflection on Sustainable Opportunities for 3D Printing in Construction
1976. Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
      A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry
1977. Singh Narinder, Colangelo Francesco, Farina Ilenia (2023-06)
      Sustainable Non-Conventional Concrete 3D Printing:
      A Review
1978. Ungureanu Dragoș, Onuțu Cătălin, Isopescu Dorina, Țăranu Nicolae et al. (2023-06)
      A Novel Approach for 3D Printing Fiber-Reinforced Mortars
1979. Salaimanimagudam M., Jayaprakash Jaganathan (2023-06)
      Effect of Printing Parameters on Inter-Filament Voids, Bonding, and Geometrical Deviation in Concrete 3D Printed Structures
1980. Wolfs Robert, Bos Derk, Salet Theo (2023-06)
      Lessons Learned of Project Milestone:
      The First 3D Printed Concrete House in the Netherlands
1981. Liu Junli, Tran Jonathan, Ginigaddara Thusitha, Mendis Priyan (2023-06)
      Exploration of Using Graphene Oxide for Strength Enhancement of 3D Printed Cementitious Mortar
1982. Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
      3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
      Automatic Construction, Digital Rebuilding, and Seismic Performance
1983. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
      3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
1984. Bello Nicholas, Memari Ali (2023-06)
      A Structural and Thermal Comparative Review of 3D Printed Wall Shapes
1985. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
      Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
1986. Katsiotis Marios, Michalis Vasileios, Papargyriou Despoina, Mavratzotis Emmanouil et al. (2023-06)
      3BUILD:
      First 3D Printed Structure in Greece
1987. Sergis Vasileios, Ouellet-Plamondon Claudiane (2023-06)
      An Optimum Mix-Design Method for 3D Concrete Printing Applications
1988. Pfleger Marc-Patrick, Geyer Sebastian, Hölzl Christian, Vill Markus (2023-06)
      Investigations to Improve the Carbon Footprint of Thin Walled Concrete Structures by 3D Printing Prefabricated Elements
1989. Zhang Sisi, Kalus Matthias, Engel Sven, Hegger Josef et al. (2023-06)
      Development of an Innovative 3D Printing Process for Reinforced Concrete:
      AMoRC Method
1990. Hou Shaodan, Duan Zhenhua, Ye Taohua, Zou Shuai et al. (2023-06)
      Mechanical Properties and Pore-Structure of 3D Printed Mortar with Recycled Powder
1991. Shenawa Amaal, Karoti Poonam (2023-06)
      3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
1992. Munemo Rue, Kruger Jacques, Zijl Gideon (2023-06)
      Improving Inter-Layer Bond in 3D Printed Concrete Through Induced Thermo-Hydrokinetics
1993. Yang Wenwei, Wang Li, Ma Guowei, Feng Peng (2023-06)
      An Integrated Method of Topological-Optimization and Path-Design for 3D Concrete Printing
1994. Joshi Arpan, Poullain Philippe, Craveiro Flávio, Bártolo Helena (2023-06)
      Earth as a Construction-Material for Sustainable 3D Printing:
      Rheological Aspect
1995. Jacquet Yohan, Perrot Arnaud (2023-06)
      Evolutionary Approach Based on Thermoplastic Bio-Based Building Material for 3D Printing Applications:
      An Insight into a Mix of Clay and Wax
1996. Heywood Kate, Nicholas Paul (2023-06)
      Sustainability and 3D Concrete Printing:
      Identifying a Need for a More Holistic Approach to Assessing Environmental Impacts
1997. Xu Zhuoyue, Zhang Dawang, Li Hui, Yin Le et al. (2023-06)
      Effects of Additives on the Mechanical Properties, Rheology, and Printing Properties of PCC-Based 3DPMs
1998. Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
      3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
      Influences of Filament Offset on Mechanical Properties
1999. Xu Zhuoyue, Zhang Dawang, Li Hui, Jin Haoyu et al. (2023-06)
      Mix-Design and 3D Printing Correlation-Performance of PCC-Based 3DPM
2000. Dittel Gözdem, Dringenberg Steffen, Gries Thomas (2023-06)
      Through Textile to Reinforced 3D Concrete Printing
2001. Soares Augusto, Rodrigues Ana, Costa Hugo, Carmo Ricardo et al. (2023-06)
      Bond Between Layers of Cementitious Mortars Developed for 3D Printing
2002. Richter Christiane, Jungwirth Jörg (2023-06)
      3D Concrete Printing:
      From Mechanical Properties to Structural Analysis
2003. Kruppa Henning, Kalthoff Matthias, Neef Tobias, Reißig Silvia et al. (2023-06)
      Alkali-Activated Binder-Requirements for Extrusion and 3D Printing of Carbon-Reinforced Concrete
2004. Miri Zahra, Polak Maria, Baaj Hassan (2023-06)
      Finite-Element-Analysis of Hardened Properties of 3D Printed Concrete
2005. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2023-06)
      Experimental Study on the Directional Dependency of 3D Printed Concrete in the Elastic Range
2006. Obermeier Nico, Wiese Felix, Kustermann Andrea, Stengel Thorsten (2023-06)
      3D Printing Cement-Based Materials Using 100% of Recycled Aggregates
2007. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
      A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
2008. Hua Tianran, Lin Alexander, Poh Wen, Wong De et al. (2023-06)
      3D Printed Concrete Shear Keys:
      Design and Experimental Study
2009. Ali Ammar, Riaz Raja, Malik Umair, Abbas Syed et al. (2023-06)
      Machine-Learning-Based Predictive-Model for Tensile and Flexural Strength of 3D Printed Concrete
2010. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-06)
      Experimental Workflow Implementation for Automatic Detection of Filament-Deviation in 3D Robotic Printing Process
2011. Paudel Satish (2023-06)
      Investigation of Modelling Approaches to Study the Structural Performance of 3D Printed Plain Wall Under Uniform Axial Compression
2012. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
      Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
2013. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2023-06)
      Numerical Modelling of Planned Corner-Deposition in 3D Concrete Printing
2014. Pham Thi, Trinh Duy, Nguyen Thi, Do Trong et al. (2023-06)
      Study on Flexural Behavior of Printed Concrete Wide Beams Using Polypropylene-Fibers
2015. Antoni Antoni, Adi N., Kurniawan M., Agraputra A. et al. (2023-06)
      The Influence of Viscosity-Modifying Agent and Calcium-Carbonate on 3D Printing Mortar Characteristics
2016. Oh Sangwoo, Hong Geuntae, Choi Seongcheol (2023-05)
      Determining the Effect of Superabsorbent Polymers, Macrofibers, and Resting Time on the Rheological Properties of Cement Mortar Using Analysis of Variance:
      A 3D Printing Perspective
2017. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
      Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
      A Critical Review
2018. Lin Che, Mattei Gabriele, Cheibas Ina, Du Chaoyu et al. (2023-05)
      PneuPrint:
      3D Printing on Inflatables
2019. Codarin Sara (2023-05)
      Enhancing the Workforce in Construction:
      Robotic Concrete Printing in Detroit
2020. Butkutė Karolina, Vaitkevičius Vitoldas, Šinka Māris, Augonis Algirdas et al. (2023-05)
      Influence of Carbonated-Bottom-Slag-Granules in 3D Concrete Printing
2021. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-05)
      Sandwich-Structured Porous Concrete Manufactured by Mortar-Extrusion and Aggregate-Bed 3D Printing
2022. Forcael Eric, Martínez-Chabur Paula, Ramírez-Cifuentes Iván, García-Alvarado Rodrigo et al. (2023-05)
      Performance-Analysis of 3D Concrete Printing Processes Through Discrete-Event-Simulation
2023. Fernandez Letízia, Caldas Lucas, Mendoza Reales Oscar (2023-05)
      Environmental Evaluation of 3D Printed Concrete Walls Considering the Life Cycle Perspective in the Context of Social Housing
2024. Ambily Parukutty, Kaliyavaradhan Senthil, Rajendran Neeraja (2023-05)
      Top Challenges to Widespread 3D Concrete Printing Adoption:
      A Review
2025. Shahzad Qamar, Li Fangyuan (2023-05)
      The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
      A Novel Approach for Practical Applications
2026. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
      Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
2027. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
      Off-Site Construction with 3D Concrete Printing
2028. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-05)
      Wet Joint Performance of 3D Printed Concrete Beam Segments Under Flexural Loading
2029. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
      Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
2030. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay (2023-05)
      Effect of Magnetorheological Additives on the Buildability of 3D Concrete Printing
2031. Mogaji Iseoluwa, Mewomo Modupe, Toyin James (2023-05)
      Key Barriers to the Adoption of 3D Printing Innovation in Construction:
      A Review of Empirical Studies
2032. Bhushan Jindal Bharat, Jangra Parveen (2023-05)
      3D Printed Concrete:
      A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications
2033. Leschok Matthias, Cheibas Ina, Piccioni Valeria, Seshadri Bharath et al. (2023-05)
      3D Printing Facades:
      Design, Fabrication, and Assessment Methods
2034. Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
      Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application
2035. Wang Li, Ye Kehan, Wan Qian, Li Zhijian et al. (2023-05)
      Inclined 3D Concrete Printing:
      Build-Up Prediction and Early-Age Performance-Optimization
2036. Mohan Manu, Rahul Attupurathu, Stappen Jeroen, Cnudde Veerle et al. (2023-05)
      Assessment of Pore-Structure Characteristics and Tortuosity of 3D Printed Concrete Using Mercury-Intrusion-Porosimetry and X-Ray Tomography
2037. Vergara Luis, Pérez Juan, Colorado Henry (2023-05)
      3D Printing of Ordinary Portland Cement with Waste-Wood-Derived Biochar Obtained from Gasification
2038. Simioni Fernanda, Rangel Bárbara, Campos Nadine, Teixeira João (2023-04)
      3D Printing for Construction:
      A Systematic Review of Its Sustainability
2039. Joshi Arpan, Carvalho Tomás, Gaspar Florindo (2023-04)
      Incorporation of Forest Biomass-Based Fly-Ash in Cement for 3D Printing
2040. Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
      3D Printed Concrete Permanent Formwork:
      Effect of Post-Cast Concrete Proportion on Interface Bonding
2041. Dias Bruno, Rocha Douglas, Faria Paulina, Lucas Sandra et al. (2023-04)
      Limes with Hydraulic Properties for 3D Printing Mortars
2042. Tao Yaxin, Lesage Karel, Schutter Geert, Tittelboom Kim (2023-04)
      Adhesion Studies in View of Automated Repair Using 3D Concrete Printing
2043. Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
      DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm
2044. Wan Qian, Yang Wenwei, Wang Li, Ma Guowei (2023-04)
      Global Continuous Path-Planning for 3D Concrete Printing Multi-Branched Structure
2045. Gupta Shashank, Esmaeeli Hadi, Prihar Arjun, Ghantous Rita et al. (2023-04)
      Fracture- and Transport-Analysis of Heterogeneous 3D Printed Lamellar Cementitious Materials
2046. Uddin Md, Ye Junhong, Deng Boyu, Li Lingzhi et al. (2023-04)
      Interpretable Machine Learning for Predicting the Strength of 3D Printed Fiber-Reinforced Concrete
2047. Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
      3D Printing of Geopolymer Mortar:
      Overview of the Effect of Mix-Design and Printing Parameters on the Strength
2048. Gao Yanan, Hua Sudong, Yue Hongfei (2023-04)
      Study on Preparation and Rheological Properties of 3D Printed Pre-Foaming Concrete
2049. Nodehi Mehrab, Omer Liam, Asiabanpour Bahram, Ozbakkaloglu Togay (2023-04)
      A Novel Lightweight Mechanism for 3D Printing of Cementitious Materials
2050. Razzaghian Ghadikolaee Mehrdad, Cerro-Prada Elena, Pan Zhu, Korayem Asghar (2023-04)
      Nanomaterials as Promising Additives for High-Performance 3D Printed Concrete:
      A Critical Review
2051. Wang Youyu, Ma Guowei, Wang Li, Zhang Wengang et al. (2023-04)
      Size-Effects in Cavern-Model-Tests Based on 3D Printing
2052. Yu Qian, Zhu Binrong, Li Xuesen, Meng Lingqi et al. (2023-04)
      Investigation of the Rheological and Mechanical Properties of 3D Printed Eco-Friendly Concrete with Steel-Slag
2053. Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
      3D Printing of Limestone-Calcined-Clay-Cement:
      A Review of Its Potential Implementation in the Construction-Industry
2054. Budiman Franky, Chandra Jimmy, Halim Alvin, Pudjisuryadi Pamuda (2023-04)
      Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams:
      An Experimental Study
2055. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
      Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
2056. Besklubova Svetlana, Tan Bing, Zhong Ray, Spicek Nikola (2023-04)
      Logistic-Cost-Analysis for 3D Printing Construction Projects Using a Multi-Stage Network-Based Approach
2057. Qu Zhengyao, Yu Qingliang, Ong Ghim, Cardinaels Ruth et al. (2023-04)
      3D Printing Concrete Containing Thermal Responsive Gelatin:
      Towards Cold Environment Applications
2058. Maurya Shubham, Dey Dhrutiman, Panda Biranchi, Dixit Uday (2023-04)
      In-Line Reinforcement of Steel-Cable in 3D Concrete Printing
2059. Delavar Mohammad, Chen Hao, Sideris Petros (2023-04)
      Seismic Design Methodology for 3D Printed Concrete Buildings
2060. Peav John, Hudson Ed, Summy Zachary, Violette Jon (2023-04)
      3D Concrete Printed Houses:
      Barriers to Adoption and Construction Practices
2061. Rekhi Jagruti, Stern Alaina (2023-04)
      3D Concrete Printed Construction:
      Building the Future of Housing, Layer-by-Layer
2062. Khan Shoukat, Jassim Muhammad, İlcan Hüseyin, Şahin Oğuzhan et al. (2023-04)
      3D Printing of Circular Materials:
      Comparative Environmental Analysis of Materials and Construction Techniques
2063. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-04)
      Interfacial Weakness Criterion by Indentation in 3D Printed Concrete
2064. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
      Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
2065. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2023-04)
      Probabilistic Prediction of Structural Failure During 3D Concrete Printing Processes
2066. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
      Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
2067. Cruz Gil, Dizon John, Farzadnia Nima, Zhou Hongyu et al. (2023-04)
      Performance, Applications, and Sustainability of 3D Printed Cement and Other Geomaterials
2068. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2023-04)
      Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
2069. Gong Fangyuan, Cheng Xuejiao, Wang Qinghua, Chen Yi et al. (2023-04)
      A Review on the Application of 3D Printing Technology in Pavement Maintenance
2070. Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Notarnicola Michele et al. (2023-04)
      3D Printed Concrete Blocks Made with Sustainable Recycled Material
2071. Luo Jiaxiang, Gao Tianyi, Yuan Philip (2023-04)
      Fabrication of Reinforced 3D Concrete Printing Formwork
2072. Ma Guowei, Huang Chen, Zhang Junfei (2023-04)
      Inner Damage-Identification and Residual Strength-Assessment of a 3D Printed Tunnel with Marble-Like Cementitious Materials Using Piezoelectric Transducers
2073. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
      Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
      A Review
2074. Salam Mohammad Abdul, Biernacki Joseph (2023-04)
      2D Stationary Computational Printing of Cement-Based Pastes with Time-Dependent Rheology
2075. Seo Eun-A, Kim Won-Woo, Kim Sung-Wook, Kwon Hongkyu et al. (2023-03)
      Mechanical Properties of 3D Printed Concrete with Coarse Aggregates and Polypropylene-Fiber in the Air and Underwater Environment
2076. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2023-03)
      3D Printed Concrete with Recycled Sand:
      Pore-Structure and Triaxial Compression Properties
2077. Wang Li, Hu Yuanyuan, Wang Qiao, Cui Tianlong (2023-03)
      Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D Printed Mortar
2078. Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
      A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
2079. Kazemian Ali, Seylabi Elnaz, Ekenel Mahmut (2023-03)
      Concrete 3D Printing:
      Challenges and Opportunities for the Construction Industry
2080. Zahabizadeh Behzad, Segundo Iran, Pereira João, Freitas Elisabete et al. (2023-03)
      Photocatalysis of Functionalised 3D Printed Cementitious Materials
2081. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
      Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
2082. Chen Wei-Ting, Sunny Anthraper Liya, Skevaki Eleni, Reiter Lex et al. (2023-03)
      Imprinting Concrete Graded Transparency in 3D Concrete Printing Walls
2083. Huang Shuyi, Xu Weiguo, Yin Yudong (2023-03)
      Improving the Overhang of 3D Printed Concrete Shells by Wrinkle Structures
2084. Wu Hao, Gu Sijia, Gao Xiaofan, Luo Jiaxiang et al. (2023-03)
      Extrusion to Masoning:
      Robotic 3D Concrete Printing of Concrete Shells as Building Floor System
2085. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
      Computational Modeling of Fiber Orientation During 3D Concrete Printing
2086. Chen Yanjuan, Kuva Jukka, Mohite Ashish, Li Zhongsen et al. (2023-03)
      Investigation of the Internal Structure of Hardened 3D Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance
2087. Tamimi Adil, Alqamish Habib, Khaldoune Ahlam, Alhaidary Haidar et al. (2023-03)
      Framework of 3D Concrete Printing Potential and Challenges
2088. Chen Yidong, Zhang Wenhua, Zhang Yunsheng, Zhang Yu et al. (2023-03)
      3D Printed Concrete with Coarse Aggregates:
      Built-In-Stirrup Permanent Concrete Formwork for Reinforced Columns
2089. Wang Ziyue, Chen Zixuan, Xiao Jianzhuang, Ding Tao (2023-03)
      Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar
2090. Uddin Md, Mahamoudou Faharidine, Deng Boyu, Elobaid Musa Moneef et al. (2023-03)
      Prediction of Rheological Parameters of 3D Printed Polypropylene-Fiber-Reinforced Concrete by Machine Learning
2091. Sun Bochao, Li Peichen, Wang Dianchao, Ye Jun et al. (2023-03)
      Evaluation of Mechanical Properties and Anisotropy of 3D Printed Concrete at Different Temperatures
2092. Fonseca Mariana, Matos Ana (2023-03)
      3D Construction Printing Standing for Sustainability and Circularity:
      Material-Level Opportunities
2093. Tahmasebinia Faham, Jabbari Amir, Skrzypkowski Krzysztof (2023-03)
      The Application of Finite Element Simulation and 3D Printing in Structural Design Within Construction Industry 4.0
2094. Qureshi Mohsin, Shiwazi Amira, Kindi Ghassan, Sawafi Bushra et al. (2023-03)
      Development of Additive for Concrete 3D Printer by Using Local Materials
2095. Quah Tan, Tay Yi, Lim Jian, Tan Ming et al. (2023-03)
      Concrete 3D Printing:
      Process-Parameters for Process-Control, Monitoring and Diagnosis in Automation and Construction
2096. Atkinson Cynthia, Aslani Farhad (2023-03)
      Performance of 3D Printed Columns Using Self-Sensing Cementitious Composites
2097. Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
      AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition
2098. Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
      Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
2099. Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
      A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
2100. Bester Frederick, Kruger Jacques, Zijl Gideon (2023-03)
      Rivet Reinforcement for Concrete Printing
2101. Ding Tao, Wang Ziyue, Liu Haoran, Xiao Jianzhuang (2023-03)
      Simulation on Pull-Out Performance of Steel-Bar from 3D Printed Concrete
2102. Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
      Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
2103. Talke Daniel, Saile Bettina, Meier Niklas, Herding Friedrich et al. (2023-03)
      Particle-Bed 3D Printing by Selective Cement-Activation:
      Influence of Process Parameters on Particle-Bed Density
2104. Onanuga Babajide, Biernacki Joseph (2023-03)
      Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials
2105. Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
      Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete
2106. Khan Shoukat, Koç Muammer (2023-03)
      Buildability-Analysis of 3D Concrete Printing Process:
      A Parametric Study Using Design of Experiment-Approach
2107. Cui Dong, Wu Yingxuan, Xie Xiaoying, Tian Guanfei et al. (2023-03)
      Investigation on the Micro-Structure of a 3D Printed Mortar Through a Novel Leaching-Subsidiary Tomography
2108. Chaiyotha Danai, Kantawong Watcharapong, Payakanitia Panjasila, Pinitsoontorn Supree et al. (2023-03)
      Finding Optimized Conditions for 3D Printed High-Calcium Fly-Ash-Based Alkali-Activated Mortar
2109. Daadouch Koussay, Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
      Computational Modeling of Fiber Orientation During 3D Concrete Printing
2110. Huber Tobias, Burger Joris, Mata-Falcón Jaime, Kaufmann Walter (2023-03)
      Structural Design and Testing of Material-Optimized Ribbed RC Slabs with 3D Printed Formwork
2111. Kruger Jacques, Westhuizen Jean-Pierré (2023-03)
      Investigating the Poisson Ratio of 3D Printed Concrete
2112. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
      Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
      Experimental and Numerical Analysis
2113. Ma Xiaosong, Tan Linzhen, Lu Yuanjing, Yao Wu et al. (2023-03)
      Upcycling of Waste Plasterboard for the Synthesis of High-Quality Gypsum-Based 3D Printing-Powder
2114. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
      Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
2115. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-03)
      Improving Homogeneity of 3D Printed Cementitious Material-Distribution for Radial Tool-Path
2116. Jesus Manuel, Guimarães Ana, Rangel Bárbara, Alves Jorge (2023-02)
      The Potential of 3D Printing in Building Pathology:
      Rehabilitation of Cultural Heritage
2117. Wang Dianchao, Xiao Jianzhuang, Sun Bochao, Zhang Shipeng et al. (2023-02)
      Mechanical Properties of 3D Printed Mortar Cured by CO2
2118. Geng Songyuan, Luo Qiling, Liu Kun, Li Yunchao et al. (2023-02)
      Research Status and Prospect of Machine Learning in Construction 3D Printing
2119. Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
      Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties
2120. Prasad Kudrekodlu, Vasugi V., Senthil Kumaran G. (2023-02)
      Application of 3D Printing Concepts in the Architecture Engineering and Construction Industry:
      A Scientometric Review
2121. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
      Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
      Systematic Evaluation and Optimization of Printability and Printing Quality
2122. Pan Zuanfeng, Si Doudou, Tao Jinghong, Xiao Jianzhuang (2023-02)
      Compressive Behavior of 3D Printed Concrete with Different Printing Paths and Concrete Ages
2123. Liu Chao, Wang Zhihui, Wu Yiwen, Liu Huawei et al. (2023-02)
      3D Printing Concrete with Recycled Sand:
      The Influence Mechanism of Extruded Pore-Defects on Constitutive Relationship
2124. Madrid Javier, Ortega Guillermo, Gorostiza Carabaño Javier, Olsson Nils et al. (2023-02)
      3D Claying:
      3D Printing and Recycling Clay
2125. Chen Yu, Liang Minfei, Zhang Yu, Li Zhenming et al. (2023-02)
      Can Superabsorbent Polymers Be Used as Rheology-Modifiers for Cementitious Materials in the Context of 3D Concrete Printing
2126. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
      Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
      Experimental and Numerical Studies
2127. Waqar Ahsan, Othman Idris, Pomares Juan (2023-02)
      Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling
2128. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
      Eggshell Pavilion:
      A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
2129. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
      Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
      Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
2130. Ishida Takato, Nakada Kiyofumi (2023-02)
      Review of Rheology in Cement-Based Materials and Its Application to 3D Printing Using Concrete
2131. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
      Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions
2132. Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
      Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
      A Review
2133. Zhang Ruo-Chen, Wang Li, Xue Xuan, Ma Guowei (2023-02)
      Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment
2134. Bedarf Patrick, Calvo Barentin Cristian, Schulte Dinorah, Şenol Ayça et al. (2023-02)
      Mineral Composites:
      Stay-in-Place Formwork for Concrete Using Foam 3D Printing
2135. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
      Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
2136. Allameh Seyed, Allameh Hadi, Miller Roger, Lenihan Avery et al. (2023-02)
      On the 3D Printing of Reinforced Concrete
2137. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
      A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
2138. Beersaerts Glenn, Hertel Tobias, Lucas Sandra, Pontikes Yiannis (2023-02)
      Promoting the Use of Fe-Rich Slag in Construction:
      Development of a Hybrid Binder for 3D Printing
2139. Baigarina Akerke, Shehab Essam, Ali Md. (2023-02)
      Construction 3D Printing:
      A Critical Review and Future Research-Directions
2140. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
      Approach for Sustainability-Assessment for Footbridge Construction Technologies:
      Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
2141. Li Xiao-Sheng, Li Long, Zou Shuai (2023-02)
      Developing Low-pH 3D Printing Concrete Using Solid Wastes
2142. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-02)
      Parametric Modelling of 3D Printed Concrete Segmented Beams with Rebars Under Bending Moments
2143. Bazli Milad, Ashrafi Hamed, Rajabipour Ali, Kutay Cat (2023-02)
      3D Printing for Remote Housing:
      Benefits and Challenges
2144. Liu Qiang, Jiang Quan, Zhou Zhenhua, Xin Jie et al. (2023-02)
      The Printable and Hardened Properties of Nano-Calcium Carbonate with Modified Polypropylene-Fibers for Cement-Based 3D Printing
2145. Gangotra Ankita, Gado Emanuela, Lewis Joanna (2023-02)
      3D Printing Has Untapped Potential for Climate Mitigation in the Cement Sector
2146. Christen Heidi, Zijl Gideon, Villiers Wibke (2023-02)
      Improving Building Thermal Comfort Through Passive Design:
      An Experimental Analysis of Phase-Change-Material 3D Printed Concrete
2147. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
      Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing
2148. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
      Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
2149. Zijl Gideon, Heever Marchant, Cho Seung (2023-01)
      SHCC Reinforced 3D Printed Concrete
2150. Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
      A New Concept for Large Additive Manufacturing in Construction:
      Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
2151. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-01)
      Multi-Scale Mechanical Characterization of the Interface in 3D Printed Concrete
2152. Alabbasi Mohammad, Agkathidis Asterios, Chen Hanmei (2023-01)
      Robotic 3D Printing of Concrete Building Components for Residential Buildings in Saudi Arabia
2153. Wang Yuxin, Aslani Farhad, Dyskin Arcady, Pasternak Elena (2023-01)
      Digital Twin Applications in 3D Concrete Printing
2154. Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
      Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
2155. Yang Yekai, Wu Chengqing, Liu Zhongxian (2023-01)
      Rate-Dependent Behavior of 3D Printed Ultra-High-Performance Fiber-Reinforced Concrete Under Dynamic Splitting Tensile
2156. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
      Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
2157. Vijayalaxmi Jeyasingh, Singh Parth (2023-01)
      Comparative Analysis of Concrete 3D Printing and Conventional Construction Technique for Housing
2158. Giridhar Greeshma, Prem Prabhat, Kumar Shankar (2023-01)
      Development of Concrete Mixes for 3D Printing Using Simple Tools and Techniques
2159. Markin Slava, Mechtcherine Viktor (2023-01)
      Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
2160. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
      Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
      A Case Study on Water Tanks
2161. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
      3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste
2162. Kosson Michael, Brown Lesa, Sanchez Florence (2023-01)
      Nano-Mechanical Characterization of 3D Printed Cement-Pastes
2163. Fan Lei, Ji Xiaohan, Wu Chengtao, Zhang Wang et al. (2023-01)
      Unlocking Toughness in 3D-Printed Cement Through Bio-Inspired Designs:
      Current Status and Future Perspectives
2164. Vlieger Jentel, Boehme Luc, Blaakmeer Jan, Li Jiabin (2023-01)
      Buildability-Assessment of Mortar with Fine Recycled Aggregates for 3D Printing
2165. Ahmed Ghafur (2023-01)
      A Review of 3D Concrete Printing:
      Materials and Process Characterization, Economic Considerations and Environmental Sustainability
2166. Zhang Nan, Sanjayan Jay (2023-01)
      Extrusion Nozzle Design and Print Parameter Selections for 3D Concrete Printing
2167. Mendřický Radomír, Keller Petr (2023-01)
      Analysis of Object-Deformations Printed by Extrusion of Concrete-Mixtures Using 3D-Scanning
2168. Arunothayan Arun, Sanjayan Jay (2023-01)
      Elevated Temperature Effects on 3D Printed Ultra-High-Performance Concrete
2169. Surehali Sahil, Tripathi Avinaya, Nimbalkar Atharwa, Neithalath Narayanan (2023-01)
      Anisotropic Chloride Transport in 3D Printed Concrete and Its Dependence on Layer-Height and Interface-Types
2170. Chu Shaohua, Yang En-Hua, Unluer Cise (2023-01)
      Development of Nanofiber-Reinforced Reactive Magnesia-Based Composites for 3D Printing
2171. Raphael Benny, Senthilnathan Shanmugaraj, Patel Abhishek, Bhat Saqib (2023-01)
      A Review of Concrete 3D Printed Structural Members
2172. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
      Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
2173. Matos Ana, Emiroğlu Mehmet, Subaşı Serkan, Maraşlı Muhammed et al. (2023-01)
      Architectonic Cement-Based Composites 3D Printing
2174. Jesus Manuel, Costa Joana, Teixeira João, Pessoa Ana Sofia et al. (2023-01)
      Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars
2175. Yang Weiyi, Huang Zili, Verma Rupesh, Nguyen Giang et al. (2023-01)
      Effect of Layer-Orientation on Behavior of 3D Printed Rock Specimens in Indirect Tensile Testing
2176. Joon Hillar, Hass Lauri, Peetrimägi Lauri (2023-01)
      Influence of Limestone-Filler on Technological Parameters of Mixtures for 3D Concrete Printing
2177. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Bajāre Diāna (2023-01)
      The Effects of 3D Printing on Frost-Resistance of Concrete
2178. Bello Nicholas, Memari Ali (2022-12)
      Comparative Review of the Technology and Case Studies of 3D Concrete Printing of Buildings by Several Companies
2179. Cao Chenyu, Sun Dongsheng, Xian Zhijun, Zhang Hengyu (2022-12)
      A Brief Review of 3D Printed Concrete
2180. Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
      A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
      Engineering, Environmental and Economic Feasibility
2181. Břoušek Josef, Petr Tomas, Mendřický Radomír (2022-12)
      Displacement-Analysis of Large-Scale Robotic Arm for Printing Cement-Mortar Using Photogrammetry
2182. Chun Seung-Yeop, Kim Su-jin, Kim Woon-Gi, Lee Geumyeon et al. (2022-12)
      Powder-Bed-Based 3D Printing with Cement for Sustainable Casting
2183. Peng Yiming, Unluer Cise (2022-12)
      Development of Alternative Cementitious Binders for 3D Printing Applications:
      A Critical Review of Progress, Advantages and Challenges
2184. Clarke-Hicks James, Ochoa Isabel, Correa David (2022-12)
      Harnessing Plastic Deformation in Porous 3D Printed Ceramic Light Screens
2185. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2022-12)
      Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete:
      Correction
2186. Shanmugan S., Sandhyarani T., Palani Subbaiya (2022-12)
      Development of 3D Concrete Printing Using Additive Manufacturing Processes for Construction and Building Industry
2187. Nováková Kateřina, Vele Jiří, Litoš Jiří, Šána Vladimír (2022-12)
      Prvok:
      Issue on 3D Printing Concrete Building
2188. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen (2022-12)
      Multi-Scale Structural Characteristics and Heat-Moisture Properties of 3D Printed Building Walls:
      A Review
2189. Nefs Karsten, Menkovski Vlado, Bos Freek, Suiker Akke et al. (2022-12)
      Automated Image Segmentation of 3D Printed Fibrous Composite Micro-Structures Using a Neural Network
2190. Yang Jun-Mo, Park In-Beom, Lee Hojae, Kwon Hongkyu (2022-12)
      Effects of Nozzle Details on Print Quality and Hardened Properties of Underwater 3D Printed Concrete
2191. Zahrani Abdullah, Alghamdi Abdulrahman, Basalah Ahmad (2022-12)
      Computational Optimization of 3D Printed Concrete Walls for Improved Building Thermal Performance
2192. Shen Yuhang, Lin Li, Wei Shengjie, Yan Jie et al. (2022-12)
      Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials
2193. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2022-12)
      3D Cement Printing:
      DFMA Guideline of Patterned Load-Bearing Walls for Small Residential Units
2194. Li Zihan, Liu Huanbao, Cheng Xiang, Nie Ping et al. (2022-12)
      Improvement of 3D Printing Cement-Based Material-Process:
      Parameter Experiment and Analysis
2195. Zhou Longfei, Gou Mifeng, Zhang Haibo (2022-12)
      Investigation on the Applicability of Bauxite-Tailings as Fine Aggregate to Prepare 3D Printing Mortar
2196. Volpe Stelladriana, Sangiorgio Valentino, Fiorito Francesco, Varum Humberto (2022-12)
      Overview of 3D Construction Printing and Future Perspectives:
      A Review of Technology, Companies and Research Progression
2197. Yang Liming, Sepasgozar Samad, Shirowzhan Sara, Kashani Alireza et al. (2022-12)
      Nozzle Criteria for Enhancing Extrudability, Buildability and Inter-Layer Bonding in 3D Printing Concrete
2198. Dvorkin Leonid, Konkol Janusz, Marchuk Vitaliy, Huts Andriy (2022-12)
      Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly-Ash
2199. Choo Joshua, Mohammed Bashar, Chen Pei-Shan, Abdulkadir Isyaka et al. (2022-12)
      Modeling and Optimizing the Effect of 3D Printed Origami-Bubble-Aggregate on the Mechanical and Deformation Properties of Rubberized ECC
2200. Korniejenko Kinga, Setlak (nee Pławecka) Kinga, Kozub Barbara (2022-12)
      An Overview for Modern Energy-Efficient Solutions for Lunar and Martian Habitats Made Based on Geopolymers Composites and 3D Printing Technology
2201. Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
      3D Printing with Cementitious Materials:
      Challenges and Opportunities for the Construction Sector
2202. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-12)
      Influence of the Pore Feature on the Water-Uptake in 3D Printed Concrete
2203. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
      Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
2204. Placzek Gerrit, Schwerdtner Patrick (2022-12)
      A Preliminary Study of the Impact of Robotic Systems on Concrete 3D Printing in the Construction Industry
2205. Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
      Modelling of 3D Concrete Printing Process:
      A Perspective on Material and Structural Simulations
2206. Rubin Ariane, Quintanilha Lucas, Repette Wellington (2022-11)
      Influence of Structuration-Rate, with Hydration-Accelerating Admixture, on the Physical and Mechanical Properties of Concrete for 3D Printing
2207. Kulaienko Oleh, Kabus Oleksii (2022-11)
      3D Concrete Printing Technology:
      Implementing Tasks in Ukraine
2208. Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
      Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
2209. Roux Charlotte, Kuzmenko Kateryna, Roussel Nicolas, Mesnil Romain et al. (2022-11)
      Life Cycle Assessment of a Concrete 3D Printing Process
2210. Jenny Ercan, Pietrasik Lukasz, Sounigo Eliott, Tsai Ping-Hsun et al. (2022-11)
      Continuous Mobile Thin-Layer On-Site Printing
2211. Jiang Jinyang, Zheng Chaolang, Wang Fengjuan, Xu Wenxiang et al. (2022-11)
      Novel 3D Printing Phase-Change-Aggregate-Concrete:
      Mechanical and Thermal Properties Analysis
2212. Senthilnathan Shanmugaraj, Raphael Benny (2022-11)
      Using Computer-Vision for Monitoring the Quality of 3D Printed Concrete Structures
2213. Zhou Yiyi, Jiang Dan, Sharma Rahul, Xie Yi et al. (2022-11)
      Enhancement of 3D Printed Cementitious Composite by Short Fibers:
      A Review
2214. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2022-11)
      CFD Modelling of Mortar-Extrusion and Path-Planning-Strategy at the Corner for 3D Concrete Printing
2215. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
      Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
2216. Kamel Ehsan, Kazemian Ali (2022-11)
      BIM-Integrated Thermal Analysis and Building Energy Modeling in 3D Printed Residential Buildings
2217. Yoris-Nobile Adrian, Slebi-Acevedo Carlos, Lizasoain-Arteaga Esther, Indacoechea-Vega Irune et al. (2022-11)
      Artificial Reefs Built by 3D Printing:
      Systematisation in the Design, Material-Selection and Fabrication
2218. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2022-11)
      Criticality of Binder-Aggregate Interaction for Buildability of 3D Printed Concrete Containing Limestone-Calcined-Clay
2219. Lee Chang-Hwan, Gwak Kwan-Woong (2022-11)
      Design of a Novel Cable-Driven Parallel Robot for 3D Printing Building Construction
2220. Wang Lining, Aslani Farhad (2022-11)
      Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
2221. Teixeira João, Schaefer Cecília, Rangel Bárbara, Maia Lino et al. (2022-11)
      A Road Map to Find in 3D Printing a New Design Plasticity for Construction:
      The State of Art
2222. Puzatova (nee Sharanova) Anastasiia, Shakor Pshtiwan, Laghi Vittoria, Dmitrieva Maria (2022-11)
      Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer:
      A Review
2223. Rech Arianna, Chiujdea Ruxandra-Stefania, Colmo Claudia, Rossi Gabriella et al. (2022-11)
      Waste-Based Biopolymer-Slurry for 3D Printing Targeting Construction Elements
2224. Arunothayan Arun, Nematollahi Behzad, Khayat Kamal, Ramesh Akilesh et al. (2022-11)
      Rheological Characterization of Ultra-High-Performance Concrete for 3D Printing
2225. Dahlenburg Maximilian, Hechtl Christian, Matthäus Carla, Fottner Johannes (2022-11)
      3D Concrete Printing:
      Graded Concrete-Extrusion
2226. Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
      Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
2227. Melichar Jindřich, Žižková Nikol, Brožovský Jiří, Mészárosová Lenka et al. (2022-11)
      Study of the Interaction of Cement-Based Materials for 3D Printing with Fly-Ash and Superabsorbent Polymers
2228. Christen Heidi, Cho Seung, Zijl Gideon, Villiers Wibke (2022-11)
      Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
2229. Liu Zhixin, Li Mingyang, Wong Teck (2022-11)
      Investigations of Nozzle-Configuration and Process Parameters on Porosity Formation of the 3D Printed Structure
2230. Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
      Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
2231. Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
      Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
2232. Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
      Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
2233. Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2022-11)
      Reinforcements in 3D Printing Concrete Structures
2234. Yue J., Beskos Dimitrios, Feng C., Wu Kai (2022-11)
      Hardened Fracture Characteristics of Printed Concrete Using Acoustic Emission Monitoring Technique
2235. Mesnil Romain, Poussard Valentin, Sab Karam, Caron Jean-François (2022-11)
      On the Geometrical Origin of the Anisotropy in Extrusion-Based 3D Printed Structures
2236. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
      Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
2237. Ahadi Bahram, Valiente López María (2022-11)
      Use of Nitinol-Shape Memory Alloy in the Reinforcement of 3D Concrete Printing Industry
2238. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-11)
      Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing:
      Correction
2239. Ma Zongfang, Wan Weipeng, Song Lin, Liu Chao et al. (2022-11)
      An Approach of Path-Optimization Algorithm for 3D Concrete Printing Based on Graph-Theory
2240. Goracci Guido, Salgado David, Gaitero Juan, Dolado Jorge (2022-11)
      Electrical Conductive Properties of 3D Printed Concrete Composite with Carbon Nanofibers
2241. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
      U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
      A Novel Reinforcing Approach
2242. Tanapornraweekit Ganchai, Jiramarootapong Patiphat, Paudel Satish, Tangtermsirikul Somnuk et al. (2022-11)
      Experimental and Numerical Investigation of 3D Printed Mortar Walls Under Uniform Axial Compression
2243. Li Shuai, Nguyen-Xuan Hung, Tran Jonathan (2022-11)
      Digital Design and Parametric Study of 3D Concrete Printing on Non-Planar Surfaces
2244. Lachmayer Lukas, Böhler David, Freund Niklas, Mai (née Dressler) Inka et al. (2022-11)
      Modelling the Influence of Material and Process Parameters on Shotcrete 3D Printed Strands:
      Cross-Section Adjustment for Automatic Robotic Manufacturing
2245. Zhao Yu, Yang Guang, Zhu Lingli, Ding Yahong et al. (2022-10)
      Effects of Rheological Properties and Printing Speed on Molding Accuracy of 3D Printing Basalt-Fiber Cementitious Materials
2246. Chandrasekar Ravekumar, Gkantou Michaela, Nikitas Georgios, Hashim Khalid et al. (2022-10)
      Integration of 3D Concrete Printing in the Construction Industry:
      A Short Review
2247. Nguyen Vuong, Liu Junli, Li Shuai, Zhang Guomin et al. (2022-10)
      Modelling of 3D Printed Bio-Inspired Bouligand Cementitious Structures Reinforced with Steel-Fibers
2248. Septiansyah Fadlika, Prasetya Sonki, Nursanto Djoko (2022-10)
      Control and Electrical System Design Consideration for a 3D Concrete Printer
2249. García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda Pablo (2022-10)
      Development of Variable Residential Buildings with 3D Printed Walls
2250. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-10)
      The Fresh and Hardened Properties of 3D Printing Cement-Base Materials with Self-Cleaning Nano-TiO2:
      An Exploratory Study
2251. Wang Dingyi, Zhang Tingting, Guo Xudong, Ling Dayi et al. (2022-10)
      The Potential of 3D Printing in Facilitating Carbon Neutrality
2252. Hahlbrock David, Braun Michael, Heidel Robin, Lemmen Patrik et al. (2022-10)
      Cable Robotic 3D Printing:
      Additive Manufacturing on the Construction Site
2253. Khan Shoukat, Koç Muammer (2022-10)
      Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
      The Underlying Physics, Potential, and Challenges
2254. Walker Ian, Krovi Venkat, Peerzada Abdul, Raman Adhiti et al. (2022-10)
      3D Concrete Printing with Macro-Micro Robots
2255. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-10)
      In-Line Activation of Geopolymer-Slurry for Concrete 3D Printing
2256. Che Yujun, Yang Huashan (2022-10)
      Hydration Products, Pore-Structure, and Compressive Strength of Extrusion-Based 3D Printed Cement-Pastes Containing Nano-Calcium-Carbonate
2257. Das Arnesh, Reiter Lex, Mantellato Sara, Flatt Robert (2022-10)
      Early-Age Rheology and Hydration-Control of Ternary Binders for 3D Printing Applications
2258. Ibrahim Iman, Eltarabishi Fatma, Abdalla Hadeer, Abdallah Mohamed (2022-10)
      3D Printing in Sustainable Buildings:
      Systematic Review and Applications in the United Arab Emirates
2259. Salandin Andrea, Quintana-Gallardo Alberto, Gómez-Lozano Vicente, Guillén-Guillamón Ignacio (2022-10)
      The First 3D Printed Building in Spain:
      A Study on Its Acoustic, Thermal and Environmental Performance
2260. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
      3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
      Printability, Mechanical Properties and Pore-Structure
2261. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
      Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
2262. Mansouri Abraham, Binali Alreem, Aljawi Abdulla, Alhammadi Ahmed et al. (2022-10)
      Thermal Modeling of the Convective Heat-Transfer in the Large Air-Cavities of the 3D Concrete Printed Walls
2263. Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
      3D Printed Geopolymer Composites:
      A Review
2264. Estévez Alberto, Abdallah Yomna (2022-10)
      The New Standard Is Biodigital:
      Durable and Elastic 3D Printed Biodigital Clay Bricks
2265. Sun Bochao, Zeng Qiang, Wang Dianchao, Zhao Weijian (2022-10)
      Sustainable 3D Printed Mortar with CO2 Pretreated Recycled Fine Aggregates
2266. Qu Zhengyao, Geng Guoqing (2022-10)
      Thermal Response Gelatin-Cement-Composite for 3D Concrete Printing
2267. Xiao Jianzhuang, Duan Zhenhua (2022-10)
      Latest Development of 3D Printing Adopting Recycled Aggregate
2268. Dey Dhrutiman, Panda Biranchi (2022-10)
      An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
2269. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
      Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
2270. Niranjan Y., Channabasavanna S., Krishnapillai Shankar, Velmurugan Ramachandran et al. (2022-10)
      The Unprecedented Role of 3D Printing Technology in Fighting the COVID-19 Pandemic:
      A Comprehensive Review
2271. Rensburg Johannes, Babafemi Adewumi, Combrinck Riaan (2022-09)
      A Textile Reinforcement Method for 3D Printed Concrete
2272. García Rodrigo, Dokladalova Eva, Dokládal Petr, Caron Jean-François et al. (2022-09)
      In-Line Monitoring of 3D Concrete Printing Using Computer-Vision
2273. Bhooshan Shajay, Bhooshan Vishu, Megens Johannes, Casucci Tommaso et al. (2022-09)
      Print-Path Design for Inclined-Plane Robotic 3D Printing of Unreinforced Concrete
2274. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
      Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
2275. Machovec Jan, Štádler Marek, Kamenický Josef, Reiterman Pavel (2022-09)
      Mechanical Properties of Concrete Lintel Produced by 3D Printing
2276. Liu Bing, Liu Xiaoyan, Li Guangtao, Geng Songyuan et al. (2022-09)
      Study on Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete Using Destructive and Non-Destructive Testing Methods
2277. Hass Lauri, Bos Freek, Salet Theo (2022-09)
      Characterizing the Bond Properties of Automatically Placed Helical Reinforcement in 3D Printed Concrete
2278. Liu Junli, Tran Jonathan (2022-09)
      Experimental Study on 3D-Printed Cementitious Materials Containing Surface-Modified Recycled Crumb-Rubber
2279. Dulaj Albanela, Salet Theo, Lucas Sandra (2022-09)
      Mechanical Properties and Self-Sensing Ability of Graphene-Mortar Compositions with Different Water-Content for 3D Printing Applications
2280. Ma Jiaming, Gomaa Mohamed, Bao Ding, Javan Anooshe et al. (2022-09)
      Print Nervi:
      Design and Construction of a Ribbed Floor System in the Digital Era
2281. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2022-09)
      Optimization of Building Floor Beam Layout by Optimization Algorithms Regarding the Concrete Printing Techniques
2282. Zhao Yanhua, Meng Wei, Wang Peifu, Qian Dongqing et al. (2022-09)
      Research-Progress of Concrete 3D Printing Technology and Its Equipment System, Material, and Molding-Defect-Control
2283. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
      Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
2284. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-09)
      3D Printing Effect on the Compressive Strength of Concrete Structures
2285. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
      Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
2286. Šinka Māris, Spuriņa Ella, Korjakins Aleksandrs, Bajāre Diāna (2022-09)
      Hempcrete:
      CO2 Neutral Wall Solutions for 3D Printing
2287. Naboni Roberto, Breseghello Luca, Sanin Sandro (2022-09)
      Environment-Aware 3D Concrete Printing through Robot-Vision
2288. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2022-09)
      Spray-Based 3D Concrete Printing with Calcium and Polymeric Additives:
      A Feasibility Study
2289. Lamnini Soukaina, Elsayed Hamada, Lakhdar Yazid, Baino Francesco et al. (2022-09)
      Robocasting of Advanced Ceramics:
      Ink-Optimization and Protocol to Predict the Printing Parameters
2290. Ren Chuangnan, Gao Baobin, Geng Chenhui, Zhu Wenjie (2022-09)
      Assembled Design and Compressive Performance Simulation of Mine Waterproof Wall Based on Concrete 3D Printing
2291. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
      Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
2292. Solonina Valentina, Surovtsev I., Butakova M. (2022-09)
      Optimizing the Structure of Construction Mixes for 3D Printing
2293. Puzatova (nee Sharanova) Anastasiia, Sokolnikova S., Dmitrieva Maria (2022-09)
      Polymer-Cement Concrete Based on Polyvinyl-Acetate Dispersion for Construction 3D Printing
2294. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
      Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
2295. Zhang Yuanyuan, Pan Pan, Li Wenqiang, Dong Biqin et al. (2022-09)
      Freeform Embedded Printing of Vasculature in Cementitious Materials for Healing-Agent Transport
2296. Wu Yun-Chen, Li Mo (2022-09)
      Effects of Early-Age Rheology and Printing Time Interval on Late-Age Fracture Characteristics of 3D Printed Concrete
2297. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2022-09)
      A Numerical Model of 3D Concrete Printing
2298. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
      A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
2299. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
      Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
2300. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2022-09)
      Topology-Optimization of Structural Beam Systems considering 3D Concrete Printing Technology-Constraints
2301. Park Ji-seul, Jeong Seung-Su, Hong Sung-Gul (2022-09)
      Numerical Analysis on Stability of Cylindrical Structures in 3D Printing Process
2302. Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
      The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
2303. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2022-09)
      Rheological and Strength-Characterisation of Limestone-Calcined-Clay-Cement 3D Printed Concrete
2304. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
      Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
2305. Meschke Günther, Neu Gerrit, Gudžulić Vladislav, Reinold Janis et al. (2022-09)
      Computational Modeling of FRC:
      From 3D Printing to Robust Design
2306. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-09)
      Characterization of 3D Printed Concrete Beams After Exposure to High Temperature
2307. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2022-09)
      Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing
2308. Licciardello Lucia, Reggia Adriano, Metelli Giovanni, Plizzari Giovanni (2022-09)
      Investigation of the Inter-Layer Strength of 3D Printed Concrete Shear Walls
2309. He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
      Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
      An Experimental and Theoretical Investigation
2310. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
      3D Printing Concrete with Recycled Coarse Aggregates:
      The Influence of Pore-Structure on Inter-Layer Adhesion
2311. Marczyk Joanna, Ziejewska Celina, Korniejenko Kinga, Łach Michał et al. (2022-09)
      Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving
2312. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Hebert Marc et al. (2022-09)
      Studying Steel-Fiber-Reinforcement for 3D Printed Elements and Structures
2313. Game Daniel, Giwa Ilerioluwa, Ahmed Hassan, Noorvand Hassan et al. (2022-09)
      Development of Ultra-High-Performance Engineered Cementitious Composites for 3D Printing Applications
2314. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
      Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
2315. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
      Robotic On-Site Adaptive Thin-Layer Printing:
      Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
2316. Xu Weiguo, Huang Shuyi, Han Dong, Zhang Zhiling et al. (2022-08)
      Toward Automated Construction:
      The Design-to-Printing Workflow for a Robotic In-Situ 3D Printed House
2317. Lee Dongyoun, Hong Junho (2022-08)
      Development of an Adaptive Slicing Algorithm of Laminated Object Manufacturing Based 3D Printing for Freeform Formwork
2318. Pham Thi, Nguyen Thu, Trinh Thanh, Nguyen Anh et al. (2022-08)
      Development of 3D Printers for Concrete Structures:
      Mix Proportion Design Approach and Laboratory Testing
2319. Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
      3D Printing Technologies in Architectural Design and Construction:
      A Systematic Literature Review
2320. Aydin Eylül, Kara Burhan, Bundur Zeynep, Özyurt Nilüfer et al. (2022-08)
      A Comparative Evaluation of Sepiolite and Nano-Montmorillonite on the Rheology of Cementitious Materials for 3D Printing
2321. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
      Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
2322. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
      Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
2323. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
      Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
2324. Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
      Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite
2325. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Dantas André et al. (2022-08)
      Thermal Performance of Cement-Leca Composites for 3D Printing
2326. Riegger Felix, Zäh Michael (2022-08)
      Additive Manufacturing of Steel-Reinforcements:
      Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
2327. Peng Guanhong (2022-08)
      Digital Fabrication and Mechanical Properties of 3D Printing Concrete
2328. Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
      3D Concrete Printing:
      Lattice Modeling of Structural Failure considering Damage and Deformed Geometry
2329. Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
      Bond Behavior Between Steel-Bars and 3D Printed Concrete:
      Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
2330. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-08)
      3D Printed Concrete as Stay-in-Place Formwork:
      Mechanics During Casting and Curing
2331. Mousavi Seyed, Dehestani Mehdi (2022-08)
      Influence of Latex and Vinyl Disposable Gloves as Recycled Fibers in 3D Printing Sustainable Mortars
2332. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2022-08)
      Rheometry for Concrete 3D Printing:
      A Review and an Experimental Comparison
2333. Lesovik Valeriy, Tolstoy Aleksandr, Fediuk Roman, Amran Mugahed et al. (2022-08)
      Improving the Performances of a Mortar for 3D Printing by Mineral Modifiers
2334. Ebrahimi Mahdi, Mohseni Mohammad, Aslani Alireza, Zahedi Rahim (2022-08)
      Investigation of Thermal Performance and Life Cycle Assessment of a 3D Printed Building
2335. Zhou Wen, McGee Wesley, Zhu He, Gökçe H. et al. (2022-08)
      Time-Dependent Fresh Properties Characterization of 3D Printing Engineered Cementitious Composites:
      On the Evaluation of Buildability
2336. Boukhelf Fouad, Sebaibi Nassim, Boutouil Mohamed, Yoris-Nobile Adrian et al. (2022-07)
      On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing:
      Long-Term Interactions of Cementitious Materials in the Marine Environment
2337. Wang Li, Xiao Wei, Wang Qiao, Jiang Hailong et al. (2022-07)
      Freeze-Thaw-Resistance of 3D Printed Composites with Desert Sand
2338. Liu Junli, Setunge Sujeeva, Tran Jonathan (2022-07)
      3D Concrete Printing with Cement-Coated Recycled Crumb Rubber:
      Compressive and Microstructural Properties
2339. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-07)
      Automating Mix-Design for 3D Concrete Printing Using Optimization Methods
2340. Barjuei Erfan, Courteille Eric, Rangeard Damien, Marie F. et al. (2022-07)
      Real-Time Vision-Based Control of Industrial Manipulators for Layer-Width Setting in Concrete 3D Printing Applications
2341. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
      Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
2342. Lee Keon-Woo, Lee Hojae, Choi Myoungsung (2022-07)
      Correlation Between Thixotropic Behavior and Buildability for 3D Concrete Printing
2343. Inaty Francois, Baz Bilal, Aouad Georges (2022-07)
      Long-Term Durability-Assessment of 3D Printed Concrete
2344. Wan Qian, Wang Li, Ma Guowei (2022-07)
      Continuous and Adaptable Printing Path Based on Transfinite Mapping for 3D Concrete Printing
2345. Nodehi Mehrab, Aguayo Federico, Nodehi Shahab, Gholampour Aliakbar et al. (2022-07)
      Durability Properties of 3D Printed Concrete
2346. Chang Ze, Zhang Hongzhi, Liang Minfei, Schlangen Erik et al. (2022-07)
      Numerical Simulation of Elastic Buckling in 3D Concrete Printing Using the Lattice-Model with Geometric Non-Linearity
2347. Wang Li, Li Qiqi, Hu Yuanyuan, Cui Tianlong et al. (2022-07)
      Shrinkage and Cracking Properties of Cellulose-Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing
2348. Yoris-Nobile Adrian, Lizasoain-Arteaga Esther, Slebi-Acevedo Carlos, Blanco-Fernandez Elena et al. (2022-07)
      Life-Cycle-Assessment and Multi-Criteria Decision-Making-Analysis to Determine the Performance of 3D Printed Cement Mortars and Geopolymers
2349. Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
      Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar
2350. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-07)
      Enhancing the Properties of Foam-Concrete 3D Printing Using Porous Aggregates
2351. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
      Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
      Cast versus Printed Specimens
2352. Farahbakhsh Mehdi, Rybkowski Zofia, Zakira Umme, Kalantar Negar et al. (2022-07)
      Impact of Robotic 3D Printing Process Parameters on Inter-Layer Bond Strength
2353. Peralta Abadi Patricia, Smarsly Kay (2022-07)
      Requirements-Analysis of Additive Manufacturing for Concrete Printing:
      A Systematic Review
2354. Dong Liang, Yang Yekai, Liu Zhongxian, Ren Quanchang et al. (2022-07)
      Microstructure and Mechanical Behavior of 3D Printed Ultra-High-Performance Concrete after Elevated Temperatures
2355. Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
      Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites
2356. Li Mingyang, Zhang Xu, Tay Yi, Ting Guan et al. (2022-07)
      Three-Dimensional (3D) Printing for Building and Construction
2357. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
      How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar?
2358. Tao Jie-Lin, Lin Can, Luo Qiling, Long Wujian et al. (2022-07)
      Leveraging Internal Curing Effect of Fly-Ash-Cenosphere for Alleviating Autogenous Shrinkage in 3D Printing
2359. Čítek David, Rehacek Stanislav, Dobias Daniel (2022-07)
      Experimental Research on 3D Printed Construction from Cement-Based Composites
2360. Pain Suzi, Choo Ee, Bartov Nitsan, Young Jack (2022-07)
      How to Dress a Column:
      An Architect's Method for Designing with 3D Printed Clay
2361. Rosendahl Philipp, Wolf Alexander (2022-07)
      The Business Case for 3D Printing in the Built Environment
2362. Lin Alexander, Goel Abhimanyu, Wong De, Yeo Charlene et al. (2022-07)
      Compressive Load-Dominated Concrete Structures for Customized 3D Printing Fabrication
2363. He Chuan, Zhang Shiyu, Liang Youwang, Ahmad Waqas et al. (2022-07)
      A Scientometric Review on Mapping Research Knowledge for 3D Printing Concrete
2364. Jipa Mihail-Andrei, Reiter Lex, Flatt Robert, Dillenburger Benjamin (2022-07)
      Environmental Stress Cracking of 3D Printed Polymers Exposed to Concrete
2365. Yu Shiwei, Sanjayan Jay, Du Hongjian (2022-07)
      Effects of Cement Mortar Characteristics on Aggregate-Bed 3D Concrete Printing
2366. Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
      Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements
2367. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2022-07)
      Numerical Modeling of 3D Concrete Printing Wall Structure to Reliably Estimate the Failure Mechanisms
2368. Nedjar Boumediene, Awada Zeinab (2022-07)
      Incremental Formulation of Early-Age Concrete in the Finite Strain Range for the Modelling of 3D Concrete Printing
2369. Fairbairn Eduardo, Santos Larissa, Farias Marina, Mendoza Reales Oscar (2022-07)
      Numerical Modeling of New Conceptions of 3D Printed Concrete Structures for Pumped Storage Hydropower
2370. Tošić Zlata, Eichenauer Martin, Ivaniuk Egor, Lordick Daniel et al. (2022-07)
      Design and Optimization of Free-Form Surfaces for Modular Concrete 3D Printing
2371. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
      A Review of Large-Scale 3DCP:
      Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
2372. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
      Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
      An Experimental Approach
2373. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-07)
      The Theory of Critical Distances to Perform the Static Assessment of 3D Printed Concrete Weakened by Manufacturing-Defects and Cracks
2374. Ma Guowei, Bai Gang, Wang Li, Wang Fang (2022-07)
      Explosion-Resistance of 3D Printing Ultra-High-Performance Concrete Based on Contact-Explosion Tests
2375. Delavar Mohammad, Chen Hao, Sideris Petros (2022-07)
      Design of 3D Printed Concrete Walls Under In-Plane Seismic Loading
2376. Silva Wilson, Kaasgaard Martin, Andersen Thomas (2022-06)
      Sustainable 3D Concrete Printing with Large Aggregates
2377. Dulaj Albanela, Suijs Monica, Salet Theo, Lucas Sandra (2022-06)
      Incorporation and Characterization of Multi-Walled Carbon Nanotube Concrete Composites for 3D Printing Applications
2378. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2022-06)
      Uncertainty Quantification of Concrete Properties at Fresh State and Stability-Analysis of the 3D Printing Process by Stochastic Approach
2379. Hynek Estelle, Bulteel David, Urquizar Antoine, Rémond Sébastien (2022-06)
      Formulation and Characterization of a Low-Carbon Impact Cementitious Ink for 3D Printing
2380. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-06)
      Set-On Demand Concrete by Activating Encapsulated Accelerator for 3D Printing
2381. Krenzer Knut, Palzer Ulrich, Müller Steffen, Mechtcherine Viktor (2022-06)
      Simulation of 3D Concrete Printing Using Discrete Element Method
2382. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
      Impact of Drying of 3D Printed Cementitious Pastes on Their Degree of Hydration
2383. Douba AlaEddin, Badjatya Palash, Kawashima Shiho (2022-06)
      Influence of Infill-Pattern on Reactive MgO Printed Structures
2384. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu, Thiruvenkatamani G. (2022-06)
      Mechanical Properties and Failure-Pattern of 3D Printed Hollow Cylinders and Wall Segments under Uniaxial Loading
2385. Asakawa Tomoya, Nishiwaki Tomoya, Ohno Kazunori, Yokoyama Shigeru et al. (2022-06)
      Fundamental Study on Automated Inter-Layer Reinforcing System with Metal-Fiber-Insertion for 3D Concrete Printer
2386. Reißig Silvia, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
      Material-Design and Rheological Behavior of Sustainable Cement-Based Materials in the Context of 3D Printing
2387. Moelich Gerrit, Rensburg Johannes, Kruger Jacques, Combrinck Riaan (2022-06)
      The Environment’s Effect on the Inter-Layer Bond Strength of 3D Printed Concrete
2388. Markin Slava, Mechtcherine Viktor (2022-06)
      Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes
2389. Rusike Rutendo, Sataya Michael, Marsh Alastair, Cavalaro Sergio et al. (2022-06)
      Accelerating Early-Age Properties of Ultra-Low Clinker Cements for Extrusion-Based 3D Printing
2390. Menna Costantino, Esposito Laura (2022-06)
      Flexural Behavior of Steel-Reinforced Topology-Optimised Beams Fabricated by 3D Concrete Printing
2391. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
      Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
2392. Spangenberg Jon, Silva Wilson, Mollah Md., Comminal Raphaël et al. (2022-06)
      Integrating Reinforcement with 3D Concrete Printing:
      Experiments and Numerical Modelling
2393. Xiao Yinan, Khader Noor, Vandenberg Aileen, Lowke Dirk et al. (2022-06)
      Injection 3D Concrete Printing (I3DCP) Combined with Vector-Based 3D Graphic Statics
2394. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-06)
      Evaluation of the Bond Strength Between 3D Printed and Self-Compacting Concrete
2395. Cho Seung, Heever Marchant, Kruger Jacques, Zijl Gideon (2022-06)
      Proof of Concept:
      Sprayable SHCC Overlay Reinforcement Regime for Unreinforced 3D Printed Concrete Structure
2396. Wangler Timothy, Aguilar Sanchez Asel, Anton Ana-Maria, Dillenburger Benjamin et al. (2022-06)
      Two Year Exposure of 3D Printed Cementitious Columns in a High-Alpine Environment
2397. Reiter Lex, Anton Ana-Maria, Wangler Timothy, Dillenburger Benjamin et al. (2022-06)
      A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites
2398. Xu Jie, Kolawole John, Provis John, Dobrzanski James et al. (2022-06)
      An Early Trial on Milling 3D Printed Concrete Geometries:
      Observations and Insights of the Process
2399. Abdalqader Ahmed, Sonebi Mohammed, Dedenis Marie, Amziane Sofiane et al. (2022-06)
      Mechanical Performance of 3D Printed Concrete Containing Fly-Ash, Metakaolin and Nano-Clay
2400. Das Arnesh, Aguilar Sanchez Asel, Wangler Timothy, Flatt Robert (2022-06)
      Freeze-Thaw-Performance of 3D Printed Concrete:
      Influence of Interfaces
2401. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2022-06)
      Using Limestone-Powder as a Carrier for the Accelerator in Extrusion-Based 3D Concrete Printing
2402. Gebhard Lukas, Bischof Patrick, Anton Ana-Maria, Mata-Falcón Jaime et al. (2022-06)
      Pre-Installed Reinforcement for 3D Concrete Printing
2403. Putten Jolien, Smet M., Heede Philip, Schutter Geert et al. (2022-06)
      Influence of the Print Process on the Durability of Printed Cementitious Materials
2404. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2022-06)
      Salt-Scaling-Resistance of 3D Printed Concrete
2405. Kruger Jacques, Mostert Jean-Pierre, Zijl Gideon (2022-06)
      A Strain-Based Constitutive Model Ensuring Aesthetic 3D Printed Concrete Structures:
      Limiting Differential Settlement of Filaments
2406. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2022-06)
      Integration of Mineral Impregnated Carbon-Fiber (MCF) into Fine 3D Printed Concrete Filaments
2407. Böhler David, Mai (née Dressler) Inka, Freund Niklas, Lachmayer Lukas et al. (2022-06)
      Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D Printed Elements
2408. Hass Lauri, Bos Freek (2022-06)
      Robotically Placed Reinforcement Using the Automated Screwing Device:
      An Application Perspective for 3D Concrete Printing
2409. Mostert Jean-Pierre, Kruger Jacques (2022-06)
      Interlocking 3D Printed Concrete Filaments Through Surface Topology Modifications for Improved Tensile Bond Strength
2410. Ooms Ticho, Vantyghem Gieljan, Tao Yaxin, Bekaert Michiel et al. (2022-06)
      The Production of a Topology-Optimized 3D Printed Concrete Bridge
2411. Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
      Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
2412. Rodriguez Fabian, Lopez Cristian, Wang Yu, Olek Jan et al. (2022-06)
      Evaluation of Durability of 3D Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments
2413. Hack Norman, Jantzen Carsten, Brohmann Leon, Gerke Markus et al. (2022-06)
      A Closed-Loop Workflow for Quality Inspection and Integrated Post-Processing of 3D Printed Concrete Elements
2414. Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
      Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System
2415. Han Nv, Xiao Jianzhuang, Zhang Lihai, Peng Yu (2022-06)
      A Micro-Scale-Based Numerical Model for Investigating Hygro-Thermo-Mechanical Behavior of 3D Printed Concrete at Elevated Temperatures
2416. Yuan Qiang, Xie Zonglin, Yao Hao, Huang Tingjie et al. (2022-06)
      Effect of Polyacrylamide on the Workability and Inter-Layer Interface Properties of 3D Printed Cementitious Materials
2417. Dvorkin Leonid, Marchuk Vitaliy, Hager Izabela, Maroszek Marcin (2022-06)
      Design of Cement-Slag Concrete Composition for 3D Printing
2418. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
      Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
      From Water State and Flocculation Point of View
2419. Hojati Maryam, Memari Ali, Zahabi Mehrzad, Wu Zhengyu et al. (2022-06)
      Barbed-Wire Reinforcement for 3D Concrete Printing
2420. Gislason Styrmir, Bruhn Simon, Breseghello Luca, Sen Burak et al. (2022-06)
      Porous 3D Printed Concrete Beams Show an Environmental Promise:
      A Cradle-to-Grave Comparative Life Cycle Assessment
2421. Oke Ayodeji, Atofarati John, Bello Sherifat (2022-06)
      Awareness of 3D Printing for Sustainable Construction in an Emerging Economy
2422. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-06)
      Fractional Factorial Design to Study Admixtures Used for 3D Concrete Printing Applications
2423. Bi Minghao, Tran Jonathan, Xia Lingwei, Ma Guowei et al. (2022-06)
      Topology-Optimization for 3D Concrete Printing with Various Manufacturing-Constraints
2424. Lee Jin, Kim Jae (2022-06)
      Matric-Suction and Its Effect on the Shape Stability of 3D Printed Concrete
2425. Neef Tobias, Butler Marko, Mechtcherine Viktor (2022-06)
      Integrating Mineral-Bonded Carbon Fibers into 3D Concrete Printing
2426. Pastore Tommaso, Esposito Laura, Menna Costantino, Asprone Domenico (2022-06)
      Overcoming Fabrication-Constraints in Concrete 3D Printing Using Interlacing Bezier-Curves:
      A Numerical and Experimental Analysis
2427. Xiao Yinan, Hack Norman, Kloft Harald (2022-06)
      Digital Structural Design and Shotcrete 3D Printing-Strategies for Lightweight Reinforced Concrete Beam-Grid Structures
2428. Shkundalova Olena, Molkens Tom, Rossi Barbara, Claßen Martin (2022-06)
      Testing 3D Printed Reinforced Concrete Beams
2429. Galeote Eduardo, Egea Carlos, Fuente Albert (2022-06)
      Characterisation and Modelling of a 3D Concrete Printed Wall under Flexure
2430. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
      Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures
2431. Chang Ze, Wan Zhi, Xu Yading, Schlangen Erik et al. (2022-06)
      Convolutional Neural Network for Predicting Crack-Pattern and Stress-Crack-Width Curve of Air-Void Structure in 3D Printed Concrete
2432. Jin Yuan, Xu Jiabin, Li Yali, Zhao Zhihui et al. (2022-06)
      Rheological Properties, Shape Stability and Compressive Strength of 3D Printed Colored Cement Composites Modified by Needle-Like Pigment
2433. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
      Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
      An Application in Extrusion-Based Concrete 3D Printing
2434. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-06)
      Hardened Properties of 3D Printed Concrete with Recycled Coarse Aggregate
2435. Hao Lucen, Xiao Jianzhuang, Sun Jingting, Xia Bing et al. (2022-06)
      Thermal Conductivity of 3D Printed Concrete With Recycled Fine Aggregate Composite Phase-Change-Materials
2436. Ming Coralie, Mirjan Ammar, Medina Ibáñez Jesús, Gramazio Fabio et al. (2022-06)
      Impact Printing
2437. Jenny Ercan, Lloret-Fritschi Ena, Jenny David, Sounigo Eliott et al. (2022-06)
      Robotic Plaster Spraying:
      Crafting Surfaces with Adaptive Thin-Layer Printing
2438. Hager Izabela, Maroszek Marcin, Mróz Katarzyna, Kęsek Rafał et al. (2022-06)
      Inter-Layer Bond Strength Testing in 3D Printed Mineral Materials for Construction Applications
2439. Cao Xiangpeng, Yu Shiheng, Zheng Dapeng, Cui Hongzhi (2022-06)
      Nail-Planting to Enhance the Interface Bonding Strength in 3D Printed Concrete
2440. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
      Drying Behavior of 3D Printed Cementitious Pastes Containing Cellulose-Nano-Crystals
2441. Nemova Darya, Kotov Evgeny, Andreeva Darya, Khorobrov Svyatoslav et al. (2022-06)
      Experimental Study on the Thermal Performance of 3D Printed Enclosing Structures
2442. Ren Chuangnan, Hua Dongliang, Bai Yonghui, Wu Shuang et al. (2022-06)
      Preparation and 3D Printing Building Application of Sulfoaluminate-Cementitious-Material Using Industrial Solid-Waste
2443. Mohammad Abdul, Biernacki Joseph (2022-06)
      2D Stationary Computational Printing of Cement-Based Pastes
2444. Jiang Quan, Liu Qiang, Wu Si, Zheng Hong et al. (2022-06)
      Modification Effect of Nano-Silica and Polypropylene-Fiber for Extrusion-Based 3D Printing Concrete:
      Printability and Mechanical Anisotropy
2445. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
      Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
2446. Zhang Hanghua, Xiao Jianzhuang, Duan Zhenhua, Zou Shuai et al. (2022-06)
      Effects of Printing Paths and Recycled Fines on Drying Shrinkage of 3D Printed Mortar
2447. Matos Paulo, Zat Tuani, Corazza Kiara, Fensterseifer Emilia et al. (2022-05)
      Effect of TiO2 Nano-Particles on the Fresh Performance of 3D Printed Cementitious Materials
2448. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
      Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
2449. Srivastava Manu, Ammons Jake, Peerzada Abdul, Krovi Venkat et al. (2022-05)
      3D Printing of Concrete with a Continuum-Robot-Hose Using Variable-Curvature Kinematics
2450. Ma Guowei, Yan Yufei, Zhang Mo, Sanjayan Jay (2022-05)
      Effect of Steel-Slag on 3D Concrete Printing of Geopolymer with Quaternary Binders
2451. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-05)
      Computational Modelling of Material-Behavior of Layered 3D Printed Concrete
2452. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2022-05)
      Fiber-Orientation Modeling During Extrusion-Based 3D Concrete Printing
2453. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-05)
      The Theory of Critical Distances to Assess the Effect of Cracks & Manufacturing-Defects on the Static Strength of 3D Printed Concrete
2454. Wijaya Ignasius, Kreiger Eric, Masud Arif (2022-05)
      An Elastic‐Inelastic Model and Embedded Bounce‐Back-Control for Layered Printing with Cementitious Materials
2455. Gran Erik, Madrid Javier, Ortega Guillermo, Tenorio Ríos José et al. (2022-05)
      Conceptual Study and Literature Review of Integration of Lean Manufacturing and 3D Printing in Construction to Support Sustainability
2456. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-05)
      Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing
2457. Ramakrishnan Sayanthan, Kanagasuntharam Sasitharan, Sanjayan Jay (2022-05)
      In-Line Activation of Cementitious Materials for 3D Concrete Printing
2458. Ivaniuk Egor, Eichenauer Martin, Tošić Zlata, Müller Steffen et al. (2022-05)
      3D Printing and Assembling of Frame Modules Using Printable Strain-Hardening Cement-Based Composites
2459. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-05)
      Bonding Strength of Steel-Rebars Perpendicular to the Hardened 3D Printed Concrete-Layers
2460. Lee Jin, Kim Jae (2022-05)
      Matric-Suction of Fine Sand and Its Effect on the Shape Stability of 3D Printed Cement Mortar
2461. Zhao Zhihui, Chen Mingxu, Jin Yuan, Lu Lingchao et al. (2022-05)
      Rheology-Control Towards 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
2462. Barbosa Marcella, Anjos Marcos, Cabral Kleber, Souza Dias Leonardo (2022-05)
      Development of Composites for 3D Printing with Reduced Cement Consumption
2463. Hu Hao, Cao Xiaoxiao, Zhang Tao, Chen Zhenfu et al. (2022-05)
      Three-Dimensional Printing Materials for Cultural Innovation Products of Historical Buildings
2464. Aslani Farhad, Dale Ryan, Hamidi Fatemeh, Valizadeh Afsaneh (2022-05)
      Mechanical and Shrinkage Performance of 3D Printed Rubberised Engineered Cementitious Composites
2465. Breseghello Luca, Naboni Roberto (2022-05)
      Tool-Path -Based Design for 3D Concrete Printing of Carbon-Efficient Architectural Structures
2466. Yang Rijiao, Zeng Qiang, Peng Yu, Wang Hailong et al. (2022-05)
      Anomalous Matrix and Inter-Layer Pore-Structure of 3D Printed Fiber-Reinforced Cementitious Composites
2467. Christen Heidi, Zijl Gideon, Villiers Wibke (2022-05)
      The Incorporation of Recycled Brick-Aggregate in 3D Printed Concrete
2468. Kuzmenko Kateryna, Ducoulombier Nicolas, Féraille Adélaïde, Roussel Nicolas (2022-05)
      Environmental Impact of Extrusion-Based Additive Manufacturing:
      Generic Model, Power-Measurements and Influence of Printing-Resolution
2469. Elistratkin Michail, Alfimova Nataliya, Podgorniy Daniil, Olisov Andrey et al. (2022-05)
      Influence of Equipment Operation Parameters on the Characteristics of a Track Produced with Construction 3D Printing
2470. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei et al. (2022-05)
      Effect of FA and GGBFS on Compressive Strength, Rheology, and Printing Properties of Cement-Based 3D Printing Material
2471. Won Daeyoun, Hwang Bon-Gang, Chi Seokho, Kor Ju (2022-05)
      Adoption of Three-Dimensional Printing Technology in Public Housing in Singapore:
      Drivers, Challenges, and Strategies
2472. Samad Nur, Abdullah Siti, Ibrahim Mustaffa, Shahidan Shahiron et al. (2022-05)
      Initial Properties of 3D Printing Concrete Using Rice-Husk-Ash as Partial Cement Replacement
2473. Klyuev Sergey, Klyuev Alexander, Fediuk Roman, Ageeva Marina et al. (2022-04)
      Fresh and Mechanical Properties of Low-Cement Mortars for 3D Printing
2474. Keys Courtney, McCorkhill Noah, Lee Yoon-Si (2022-04)
      Investigation of Martian Concrete:
      Pumpability and Strength for Extraterrestrial 3D Printing
2475. Muthumanickam Naveen, Duarte José, Nazarian Shadi, Bilén Sven (2022-04)
      Metamodels for Rapid Analysis of Large Sets of Building Designs for Robotic Constructability:
      Technology Demonstration Using the NASA 3D Printed Mars Habitat Challenge
2476. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Burak (2022-04)
      A Comprehensive Review on Fresh State Rheological Properties of Extrusion-Mortars Designed for 3D Printing Applications
2477. Liu Huawei, Liu Chao, Bai Guoliang, Wu Yiwen et al. (2022-04)
      Influence of Pore-Defects on the Hardened Properties of 3D Printed Concrete with Coarse Aggregate
2478. Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
      Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
2479. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2022-04)
      3D Printing of Cement-Based Materials with Adapted Buildability
2480. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-04)
      D-Optimal Design of Experiments Applied to 3D High-Performance Concrete Printing Mix-Design
2481. Tan Yuan, Dahlenburg Maximilian, Fottner Johannes, Kessler Stephan (2022-04)
      Influencing Factors of the Mixing Performance of a Near-Nozzle Continuous Mixer for 3D Concrete Printing:
      An Analysis Based on Spatial-Lacey-Mixing-Index
2482. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
      The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar
2483. Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
      Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
2484. Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
      Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction
2485. Bedarf Patrick, Szabó Anna, Zanini Michele, Heusi Alex et al. (2022-04)
      Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
2486. Wu Hao, Li Ziyan, Zhou Xinjie, Wu Xinyu et al. (2022-04)
      Digital Design and Fabrication of a 3D Concrete Printed Funicular Spatial Structure
2487. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
      A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
2488. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
      Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
      A Systematic Literature Review
2489. Wang Bolin, Yao Xiaofei, Yang Min, Zhang Runhong et al. (2022-04)
      Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions
2490. Uhlík Adam, Buch Mário, Unčík Stanislav (2022-04)
      Effecting the Rheological Properties of Composites for 3D Printing Technology in Construction
2491. Liu Haoran, Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2022-04)
      Buildability Prediction of 3D Printed Concrete at Early-Ages:
      A Numerical Study with Drucker-Prager-Model
2492. Huang Shuyi, Xu Weiguo, Li Yuqian (2022-04)
      The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms
2493. Ziejewska Celina, Marczyk Joanna, Korniejenko Kinga, Bednarz Sebastian et al. (2022-04)
      3D Printing of Concrete-Geopolymer Hybrids
2494. Ruffray Nicolas, Reiter Lex, Flatt Robert (2022-04)
      Overcoming Environmental Stress-Cracking of FDM 3D Printed Formwork for Counter-Pressure Casting of Concrete
2495. Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
      3D Printed Formwork for Concrete:
      State of the Art, Opportunities, Challenges, and Applications
2496. Rollakanti Chiranjeevi, Prasad C. (2022-04)
      Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
      A State of the Art Review
2497. Kazadi Billy, Yao Liang, Wang Li (2022-04)
      In-Process Reinforcement Method for 3D Concrete Printing:
      Status, Potentials and Challenges
2498. Wang Huan, Tian Xinchen, Wei Huixian, Dai Xueyan et al. (2022-04)
      Effects of Redispersible Latex-Powder on the Performance of 3D Printing Cementitious Materials
2499. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
      Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
2500. Zhang Xinyue, Cui Weijiu, Qu Chengping, Wang Sheng et al. (2022-04)
      Discussion on Key Problems of 3D Printing Concrete in Coastal Environment
2501. Li Weihong, Chen Xuhao, Li Nan (2022-04)
      3D Printing of Fast Setting Basalt Fiber-Reinforced Cement-Based Materials
2502. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
      Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
      Case Study Parque De Castilla Footbridge in Madrid
2503. Chen Yu, Chang Ze, He Shan, Çopuroğlu Oğuzhan et al. (2022-04)
      Effect of Curing Methods During a Long Time-Gap Between Two Printing Sessions on the Inter-Layer Bonding of 3D Printed Cementitious Materials
2504. Gimenez-Carbo Ester, Torres Raquel, Coll Hugo, Roig-Flores Marta et al. (2022-04)
      Preliminary Study of the Fresh and Hard Properties of UHPC That Is Used to Produce 3D Printed Mortar
2505. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
      Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
2506. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
      3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
      A Review
2507. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
      Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
      A Review
2508. Marchment Taylor, Sanjayan Jay (2022-04)
      Lap Joint Reinforcement for 3D Concrete Printing
2509. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
      Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
2510. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-04)
      A Plastic Shrinkage Cracking-Risk-Model for 3D Printed Concrete Exposed to Different Environments
2511. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
      Effect of Processing on the Air-Void System of 3D Printed Concrete
2512. Mo Yixin, Xing Jianchun, Yue Songlin, Zhang Yamei et al. (2022-04)
      Dynamic Properties of 3D Printed Cement Mortar Based on Split Hopkinson Pressure Bar Testing
2513. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
      Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability
2514. Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
      Technology Readiness:
      A Global Snapshot of 3D Concrete Printing and the Frontiers for Development
2515. Afarani Hajar, Moser Newell, Garboczi Edward, Esfahani Ebrahim et al. (2022-03)
      Print Fidelity Metrics for Additive Manufacturing of Cement-Based Materials
2516. Ulubeyli Serdar (2022-03)
      Lunar Shelter Construction Issues:
      The State of the Art Towards 3D Printing Technologies
2517. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
      Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
2518. Pan Tinghong, Jiang Yaqing, Ji Xuping (2022-03)
      Inter-Layer Bonding Investigation of 3D Printing Cementitious Materials with Fluidity-Retaining Polycarboxylate-Superplasticizer and High-Dispersion Polycarboxylate Superplasticizer
2519. Liu Jie, Lv Chun (2022-03)
      Properties of 3D Printed Polymer Fiber-Reinforced Mortars:
      A Review
2520. Adams Thomas, Heuer Christoph, Brell-Cokcan Sigrid (2022-03)
      Dynamic 3D Print-Head for Spatial Strand-Extrusion of Fiber-Reinforced Concrete:
      Requirements, Development and Application
2521. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
      Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
      Experimental and Numerical Studies
2522. Ranjan Rajeev, Kumar Deepak, Kundu Manoj, Chandra Moi Subhash (2022-03)
      A Critical Review on Classification of Materials Used in 3D Printing Process
2523. Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
      3D Concrete Printing Modelling of Thin-Walled Structures
2524. Qi Li-gang, Bai Jie, Huang Qing-long, Yang Yan et al. (2022-03)
      Mobile 3D Printing-Techniques for Construction Engineering:
      Outdoor Navigation and Printing Quality-Control
2525. Putten Jolien, Volder Melissa, Heede Philip, Deprez Maxim et al. (2022-03)
      Transport Properties of 3D Printed Cementitious Materials with Prolonged Time-Gap Between Successive Layers
2526. Douba AlaEddin, Badjatya Palash, Kawashima Shiho (2022-03)
      Enhancing Carbonation and Strength of MgO Cement Through 3D Printing
2527. Wang Bolin, Zhai Mingang, Yao Xiaofei, Wu Qing et al. (2022-03)
      Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes
2528. Zhi Peng, Wu Yuching, Yang Qianfan, Kong Xiangrui et al. (2022-03)
      Effect of Spiral Blade Geometry on 3D Printed Concrete Rheological Properties and Extrudability Using Discrete Event Modeling
2529. Břoušek Josef, Petr Tomas, Beran Leoš, Myslivec Tomáš et al. (2022-03)
      Robotic Arm-Design, Development and Control for Printing Cement-Mixtures
2530. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
      Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
2531. Ivanova Irina, Ivaniuk Egor, Bisetti Sameercharan, Nerella Venkatesh et al. (2022-03)
      Comparison Between Methods for Indirect Assessment of Buildability in Fresh 3D Printed Mortar and Concrete
2532. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
      A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
2533. Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
      Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
2534. Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
      Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation
2535. Miryousefi Ata Sara, Kazemian Ali, Jafari Amirhosein (2022-03)
      Application of Concrete 3D Printing for Bridge Construction:
      Current Challenges and Future Directions
2536. Manhanpally Najeeb, Saha Suman (2022-03)
      Benefit-Cost Analysis of 3D Printed Concrete Building
2537. Liu Jianan, Wang Zhenjun, Zhao Xin, Yu Cong et al. (2022-03)
      Quantitative Evaluations on Influences of Aggregate Surface Texture on Interfacial Adhesion Using 3D Printing Aggregate
2538. Sayegh Sameh, Romdhane Lotfi, Manjikian Solair (2022-03)
      A Critical Review of 3D Printing in Construction:
      Benefits, Challenges, and Risks
2539. Xiao Jianzhuang, Lv Zhenyuan, Duan Zhenhua, Hou Shaodan (2022-03)
      Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate-Combinations
2540. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
      A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
2541. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
      Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
2542. Yuan Qiang, Gao Chao, Huang Tingjie, Zuo Shenghao et al. (2022-03)
      Factors Influencing the Properties of Extrusion-Based 3D Printed Alkali-Activated Fly-Ash-Slag Mortar
2543. Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
      Layer Pressing in Concrete Extrusion-Based 3D Printing:
      Experiments and Analysis
2544. Nguyen-Van Sy, Gwak Kwan-Woong (2022-03)
      A Two-Nozzle Cable-Driven Parallel Robot for 3D Printing Building Construction:
      Path-Optimization and Vibration Analysis
2545. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
      Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
      Exploring Reinforcement-Strategies and Optimization
2546. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
      Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
      Correction
2547. Zhou Jiehang, Du Longyu, Lai Jianzhong, Wang Qiang et al. (2022-03)
      Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete
2548. Lowke Dirk, Mai (née Dressler) Inka, Keita Emmanuel, Perrot Arnaud et al. (2022-02)
      Material-Process Interactions in Particle-Bed 3D Printing and the Underlying Physics
2549. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
      Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
2550. Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
      Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading
2551. Wang Li, Yang Yu, Yao Liang, Ma Guowei (2022-02)
      Interfacial Bonding Properties of 3D Printed Permanent Formwork with the Post-Casted Concrete
2552. Zhong Hui, Zhang Mingzhong (2022-02)
      3D Printing Geopolymers:
      A Review
2553. Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
      Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete
2554. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2022-02)
      Experimental Investigation on Inner- and Inter-Strip Reinforcements for 3D Printed Concrete via Automatic Staple Inserting Technique
2555. Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
      Recent Developments and Challenges of 3D Printed Construction:
      A Review of Research Fronts
2556. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-02)
      Set-on-Demand Geopolymer Using Print-Head Mixing for 3D Concrete Printing
2557. Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
      A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering
2558. Nguyen Ngoc, Bui Tan-Trung, Bui Quoc-Bao (2022-02)
      Fiber-Reinforced Concrete for Slabs without Steel-Rebar-Reinforcement:
      Assessing the Feasibility for 3D Printed Individual Houses
2559. Heever Marchant, Plessis Anton, Bester Frederick, Kruger Jacques et al. (2022-02)
      A Mechanistic Evaluation Relating Microstructural Morphology to a Modified Mohr-Griffith Compression-Shear Constitutive-Model for 3D Printed Concrete
2560. Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
      Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
      Effect of Precursor Nature
2561. Aguilar Sanchez Asel, Wangler Timothy, Stefanoni Matteo, Angst Ueli (2022-02)
      Microstructural Examination of Carbonated 3D Printed Concrete
2562. Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
      Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
2563. Weger Daniel, Gehlen Christoph, Korte Waldemar, Meyer-Brötz Fabian et al. (2022-02)
      Building Rethought:
      3D Concrete Printing in Building Practice
2564. Ahmed Sara, Yehia Sherif (2022-02)
      Evaluation of Workability and Structuration-Rate of Locally Developed 3D Printing Concrete Using Conventional Methods
2565. Ji Guangchao, Xiao Jianzhuang, Zhi Peng, Wu Yuching et al. (2022-02)
      Effects of Extrusion-Parameters on Properties of 3D Printing Concrete with Coarse Aggregates
2566. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
      Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
      A Review
2567. Kajimoto Jumpei, Koyanagi Jun, Maruyama Yusuke, Kajita Hideyuki et al. (2022-02)
      Automated Interlaminar-Reinforcement with Thickness-Directiona-Fiber-Arrangement for 3D Printing
2568. Singh Amardeep, Liu Qiong, Xiao Jianzhuang, Lyu Qifeng (2022-02)
      Mechanical and Macrostructural Properties of 3D Printed Concrete Dosed with Steel-Fibers under Different Loading-Direction
2569. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-02)
      Influence of Nano-Clay on the Fresh and Rheological Behavior of 3D Printing Mortar
2570. Heidarnezhad Fatemeh, Zhang Qian (2022-01)
      Shotcrete-Based 3D Concrete Printing:
      State of Art, Challenges, and Opportunities
2571. M’Lahfi Basma, Amegouz Driss, Qandil Mostafa (2022-01)
      New Printable Concrete Formulation Based on Fibers from Doum Palm Leaflets for 3D Printing of Energy-Efficient Buildings
2572. Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
      A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction
2573. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
      Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
2574. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
      Additive Manufacturing:
      A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
2575. Ismail Nur, Ibrahim Mustaffa, Abdullah Siti (2022-01)
      Compressive Strength of 3D Printing Bio-Composites Mortar
2576. Ding Tao, Qin Fei, Xiao Jianzhuang, Chen Xiaoming et al. (2022-01)
      Experimental Study on the Bond Behavior Between Steel-Bars and 3D Printed Concrete
2577. Suntharalingam Thadshajini, Upasiri Irindu, Nagaratnam Brabha, Poologanathan Keerthan et al. (2022-01)
      Finite Element Modelling to Predict the Fire Performance of Bio-Inspired 3D Printed Concrete Wall Panels Exposed to Realistic Fire
2578. Shakor Pshtiwan, Chu Shaohua, Puzatova (nee Sharanova) Anastasiia, Dini Enrico (2022-01)
      Review of Binder-Jetting 3D Printing in the Construction Industry
2579. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
      Properties and Testing of Printed Cement-Based Materials in Hardened State
2580. Yang Huashan, Che Yujun (2022-01)
      Recycling of Aggregate Micro-Fines as a Partial Replacement for Fly-Ash in 3D Printing Cementitious Materials
2581. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
      Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
2582. Sangiorgio Valentino, Parisi Fabio, Fieni Francesco, Parisi Nicola (2022-01)
      The New Boundaries of 3D-Printed Clay-Bricks-Design:
      Printability of Complex Internal Geometries
2583. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
      Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
2584. Wu Zhengyu, Memari Ali, Duarte José (2022-01)
      State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete
2585. Castano-Alvarez Ruben, Calderon-Uriszar-Aldaca Iñigo, Marcos Ignacio (2021-12)
      Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening
2586. Sukontasukkul Piti, Panklum Kasidet, Maho Buchit, Banthia Nemkumar et al. (2021-12)
      Effect of Synthetic Micro-Fiber and Viscosity-Modifying-Agent on Layer Deformation, Viscosity, and Open-Time of Cement Mortar for 3D Printing Application
2587. Skibicki Szymon, Jakubowska Patrycja, Kaszyńska Maria, Sibera Daniel et al. (2021-12)
      Early-Age Mechanical Properties of 3D Printed Mortar with Spent Garnet
2588. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-12)
      Numerical Modelling-Strategies for Reinforced 3D Concrete Printed Elements
2589. Malan Jean, Rooyen Algurnon, Zijl Gideon (2021-12)
      Chloride-Induced Corrosion and Carbonation in 3D Printed Concrete
2590. Yang Yekai, Wu Chengqing, Liu Zhongxian, Zhang Hai (2021-12)
      3D Printing Ultra-High-Performance Fiber-Reinforced Concrete under Triaxial Confining Loads
2591. Sun Xiaoyan, Ye Boxing, Lin Kangjian, Wang Hailong (2021-12)
      Shear-Performance of 3D Printed Concrete Reinforced with Flexible or Rigid Materials Based on Direct-Shear-Test
2592. Yin Jian, Suo Yiru, Lv Tao, Ma Kaisi et al. (2021-12)
      Application of 3D Printing Technology in the Construction Industry and Its Development Prospects
2593. Yue Hongfei, Hua Sudong, Qian Hao, Yao Xiao et al. (2021-12)
      Investigation on Applicability of Spherical Electric Arc-Furnace-Slag as Fine Aggregate in Superplasticizer-Free 3D Printed Concrete
2594. Lee Hojae, Seo Eun-A, Kim Won-Woo, Yang Jun-Mo et al. (2021-12)
      X-Ray CT Analysis of the Cross-Section of a 3D Printed Deformed Layer
2595. Zhang Ying, Wan Zhiming, Wu Lei (2021-12)
      Study on Mechanical Properties of In-Situ Printed Reinforced Concrete Wall with Core Column
2596. Skibicki Szymon, Techman Mateusz, Federowicz Karol, Olczyk Norbert et al. (2021-12)
      Experimental Study of Hardened Young's Modulus for 3D Printed Mortar
2597. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
      Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
2598. Batikha Mustafa, Jotangia Rahul, Baaj Mohamad, Mousleh Ibrahim (2021-12)
      3D Concrete Printing for Sustainable and Economical Construction:
      A Comparative Study
2599. Min Kyung-Sung, Park Kwang-Min, Lee Bong-Chun, Roh Young-Sook (2021-12)
      Chloride Diffusion by Build Orientation of Cementitious Material-Based Binder-Jetting 3D Printing Mortar
2600. Liu Junli, Li Shuai, Fox Kate, Tran Jonathan (2021-12)
      3D Concrete Printing of Bio-Inspired Bouligand Structure:
      A Study on Impact-Resistance
2601. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
      Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
2602. Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
      Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
2603. Şahin Hatice, Mardani Ali (2021-12)
      Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
      A State of the Art Review
2604. Lesovik Valeriy, Fediuk Roman, Amran Mugahed, Alaskhanov Arbi et al. (2021-12)
      3D Printed Mortars with Combined Steel and Polypropylene Fibers
2605. Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
      New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction
2606. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2021-12)
      Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle
2607. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
      Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
2608. Weger Daniel, Stengel Thorsten, Gehlen Christoph, Maciejewski Yannick et al. (2021-12)
      Approval for the Construction of the First 3D Printed Detached House in Germany:
      Significance of Large-Scale Element Testing
2609. Verian Kho, Ashcroft Jarron, Ziemlaski Jim, Brodesser Tim et al. (2021-12)
      The Assessment of the Buildability and Inter-Layer Adhesion Strength of 3D Printed Mortar
2610. Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
      Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete
2611. Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
      Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing
2612. Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
      The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite
2613. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
      3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
2614. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
      High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
2615. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
      PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
      Mechanical Properties and Durability
2616. Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
      Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
2617. Jiao Dengwu, Shi Caijun, Schutter Geert (2021-11)
      Magneto-Rheology-Control in 3D Concrete Printing:
      A Rheological Attempt
2618. Nair Sooraj, Sant Gaurav, Neithalath Narayanan (2021-11)
      Mathematical Morphology-Based Point-Cloud-Analysis-Techniques for Geometry-Assessment of 3D Printed Concrete Elements
2619. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
      Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
2620. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
      3D Printed Concrete with Recycled Glass:
      Effect of Glass Gradation on Flexural Strength and Microstructure
2621. Izadgoshasb Hamed, Kandiri Amirreza, Shakor Pshtiwan, Laghi Vittoria et al. (2021-11)
      Predicting Compressive Strength of 3D Printed Mortar in Structural Members Using Machine Learning
2622. Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
      Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
2623. Liu Hanqiu, Egbe King-James, Wang Haipeng, Nazar Ali et al. (2021-11)
      A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression
2624. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
      Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
2625. Liu Xuanting, Sun Bohua (2021-11)
      The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes
2626. Kocherla Amarteja, Kamakshi Tippabhotla, Subramaniam Kolluru (2021-11)
      In-Situ Embedded PZT Sensor for Monitoring 3D Concrete Printing:
      Application in Alkali-Activated Fly-Ash-Slag Geopolymers
2627. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
      A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
2628. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
      Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
2629. Tam Vo, Hien Do, Luan Phan, Tran Van et al. (2021-11)
      3D Concrete Printing-Material:
      Preliminary Study
2630. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2021-11)
      Role of Chemical Admixtures on 3D Printed Portland Cement:
      Assessing Rheology and Buildability
2631. He Lewei, Tan Jolyn, Chow Wai, Li Hua et al. (2021-11)
      Design of Novel Nozzles for Higher Inter-Layer Strength of 3D Printed Cement-Paste
2632. Shaker Aya, Khader Noor, Reiter Lex, Anton Ana-Maria (2021-11)
      3D Printed Concrete Tectonics
2633. Bruce Mackenzie, Clune Gabrielle, Xie Ruxin, Mozaffari Salma et al. (2021-11)
      Cocoon:
      3D Printed Clay Formwork for Concrete Casting
2634. Marczyk Joanna, Ziejewska Celina, Gądek Szymon, Korniejenko Kinga et al. (2021-11)
      Hybrid Materials Based on Fly-Ash, Metakaolin, and Cement for 3D Printing
2635. Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2021-11)
      Automated Shotcrete 3D Printing:
      Printing Interruption for Extended Component Complexity
2636. Pekuss Raitis, Ancupane Amelija, Soto Borja (2021-11)
      Quantifying the Complexity of 3D Printed Concrete Elements
2637. Placzek Gerrit, Brohmann Leon, Mawas Karam, Schwerdtner Patrick et al. (2021-11)
      A Lean-Based Production Approach for Shotcrete 3D Printed Concrete Components
2638. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
      A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
      The Case of a 29m Bridge in the Netherlands
2639. Ivaniuk Egor, Müller Steffen, Neef Tobias, Mechtcherine Viktor (2021-11)
      Strategies for Integrating Reinforcement Into 3D Concrete Printing at the TU Dresden
2640. Freund Niklas, Lowke Dirk (2021-11)
      Inter-Layer Reinforcement in Shotcrete 3D Printing
2641. Suiker Akke (2021-11)
      Effect of Accelerated Curing and Layer Deformations on Structural Failure During Extrusion-Based 3D Printing
2642. Park Jihun, Bui The, Lee Jungwoo, Joh Changbin et al. (2021-11)
      Inter-Layer Strength of 3D Printed Mortar Reinforced by Postinstalled Reinforcement
2643. Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
      Thermal and Environmental Benefits of 3D Printing on Building Construction
2644. Antoni Antoni, Agraputra A., Teopilus D., Sunaryo A. et al. (2021-11)
      Investigation of the Material-Mixtures and Fiber-Addition for 3D Concrete Printing
2645. Salleh Norhafizah, Jamalulail Nur, Abdul Hamid Noor, Jamellodin Zalipah et al. (2021-11)
      New Technology in 3D Concrete Printing by Using Ground-Granulated Blast-Furnace-Slag:
      A Review
2646. Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
      Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures
2647. Murcia Heras, Abdellatef Mohammed, Genedy Moneeb, Taha Mahmoud (2021-11)
      Rheological Characterization of Three-Dimensional-Printed Polymer Concrete
2648. Markin Slava, Schröfl Christof, Blankenstein Paul, Mechtcherine Viktor (2021-11)
      Three-Dimensional-Printed Wood-Starch Composite as Support Material for 3D Concrete Printing
2649. Kruger Jacques, Cho Seung, Bester Frederick, Rooyen Algurnon et al. (2021-11)
      Nano-Technology for Improved Three-Dimensional Concrete Printing Constructability
2650. Douba AlaEddin, Kawashima Shiho (2021-11)
      Use of Nano-Clays and Methylcellulose to Tailor Rheology for Three-Dimensional Concrete Printing
2651. Nishiwaki Tomoya, Miyata Yoshihiro, Furue Shoko, Fukatsu Shiko et al. (2021-11)
      Reinforcing Interlayers of Three-Dimensional-Printed Mortar Using Metal-Fiber-Insertion
2652. Rodriguez Fabian, Olek Jan, Moini Mohamadreza, Zavattieri Pablo et al. (2021-11)
      Linking Solids Content and Flow Properties of Mortars to Their Three-Dimensional Printing Characteristics
2653. Yuan Qiang, Zuo Shenghao, Li Zemin, Shi Caijun et al. (2021-11)
      Optimizing Three-Dimensional Printing Binder Composed of Ordinary-Portland-Cement and Calcium-Sulfoaluminate-Cement with Retarders
2654. Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
      Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
2655. Kondepudi Kala, Subramaniam Kolluru (2021-11)
      Extrusion-Based Three-Dimensional Printing Performance of Alkali-Activated Binders
2656. Fischer Gregor, Paegle Ieva (2021-11)
      Reinforcement of Three-Dimensional-Printed Concrete Structures by Weaving and Knitting of Continuous Fibers and Wires
2657. Zhu He, Yu Kequan, McGee Wesley, Ng Tsz et al. (2021-11)
      Limestone-Calcined-Clay-Cement for Three-Dimensional Printed Engineered Cementitious Composites
2658. Xu Emily, Tejada Karin, Walker David, Zivkovic Sasa et al. (2021-11)
      Measuring Flow- and Setting-Time for Three-Dimensionally Printed Mortar:
      Case Study
2659. Abdalla Hadeer, Fattah Kazi, Abdallah Mohamed, Tamimi Adil (2021-10)
      Environmental Footprint and Economics of a Full-Scale 3D Printed House
2660. Xu Zhen, Song Tao, Guo Shuai, Peng Jiangtao et al. (2021-10)
      Robotics Technologies Aided for 3D Printing in Construction:
      A Review
2661. Zou Shuai, Xiao Jianzhuang, Duan Zhenhua, Ding Tao et al. (2021-10)
      On Rheology of Mortar with Recycled Fine Aggregate for 3D Printing
2662. Lee Hojae, Seo Eun-A, Kim Won-Woo, Moon Jae-Heum (2021-10)
      Experimental Study on Time-Dependent Changes in Rheological Properties and Flow-Rate of 3D Concrete Printing Materials
2663. Lyu Fuyan, Zhao Dongliang, Hou Xiaohui, Sun Li et al. (2021-10)
      Overview of the Development of 3D Printing Concrete:
      A Review
2664. Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
      Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing
2665. Sesetti Harika, Lalithya Muthina, Kumar Pala (2021-10)
      3D Concrete Printing in Construction Industry:
      A State of the Art
2666. Prasad C. (2021-10)
      3D Concrete Printing Technology Current Progress and Future Perspective:
      A State of the Art Review
2667. Villacrés Juan, Guamán-Rivera Robert, Menéndez Oswaldo, Cheein Fernando (2021-10)
      3D Printing Deformation Estimation Using Artificial Vision-Strategies for Smart-Construction
2668. Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
      Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces
2669. Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
      Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing
2670. Shahzad Qamar, Shen Junyi, Naseem Rabia, Yao Yonggang et al. (2021-10)
      Influence of Phase-Change-Material on Concrete Behavior for Construction 3D Printing
2671. Mai (née Dressler) Inka, Brohmann Leon, Freund Niklas, Gantner Stefan et al. (2021-10)
      Large Particle 3D Concrete Printing:
      A Green and Viable Solution
2672. Hou Shaodan, Xiao Jianzhuang, Duan Zhenhua, Ma Guowei (2021-10)
      Fresh Properties of 3D Printed Mortar with Recycled Powder
2673. Han Xiaoyu, Yan Jiachuan, Liu Mingjian, Huo Liang et al. (2021-10)
      Experimental Study on Large-Scale 3D Printed Concrete Walls Under Axial Compression
2674. Spangenberg Jon, Silva Wilson, Comminal Raphaël, Mollah Md. et al. (2021-10)
      Numerical Simulation of Multi-Layer 3D Concrete Printing
2675. Woo Seong-Jin, Yang Jun-Mo, Lee Hojae, Kwon Hongkyu (2021-10)
      Comparison of Properties of 3D Printed Mortar in Air vs. Underwater
2676. Abdallah Yomna, Estévez Alberto (2021-10)
      3D Printed Biodigital Clay Bricks
2677. Zhang Nan, Xia Ming, Sanjayan Jay (2021-10)
      Short-Duration Near-Nozzle Mixing for 3D Concrete Printing
2678. Tran Mien, Cu Yen, Le Chau (2021-10)
      Rheology and Shrinkage of Concrete Using Polypropylene-Fiber for 3D Concrete Printing
2679. Olsson Nils, Arica Emrah, Woods Ruth, Madrid Javier (2021-10)
      Industry 4.0 in a Project Context:
      Introducing 3D Printing in Construction Projects
2680. Uribe-Pinzon Sebastian, Mosquera Mariana, Cardenas-Pulido Jhon, Higuera Camilo (2021-10)
      Advances and Current Trends on the Use of 3D Printed Concrete for Building Fabrication
2681. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-09)
      Energy Performance of 3D Printed Concrete Walls:
      A Numerical Study
2682. Mo Yixin, Yue Songlin, Zhou Qizhen, Feng Bowei et al. (2021-09)
      Dynamic Properties and Fractal Characteristics of 3D Printed Cement Mortar in SHPB-Test
2683. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
      Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
2684. Troemner Matthew, Ramyar Elham, Meehan Jonathan, Johnson Benton et al. (2021-09)
      A 3D Printing-Centered Approach to Mars-Habitat Architecture and Fabrication
2685. Xu Yanqun, Yuan Qiang, Li Zemin, Shi Caijun et al. (2021-09)
      Correlation of Inter-Layer Properties and Rheological Behaviors of 3DPC with Various Printing Time Intervals
2686. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2021-09)
      Shrinkage Behavior of Cementitious 3D Printing Materials:
      Effect of Temperature and Relative Humidity
2687. Stoiber Nadine, Kromoser Benjamin (2021-09)
      Pushing Concrete Material-Usage to the Limit:
      Weight-Optimized, 3D Printed Concrete Girders with External Reinforcement
2688. Nedjar Boumediene (2021-09)
      Incremental Viscoelasticity at Finite Strains for the Modelling of 3D Concrete Printing
2689. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
      Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
2690. Nováková Kateřina, Vele Jiří (2021-09)
      Prvok:
      An Experiment with 3D Printing Large Doublecurved Concrete Structure
2691. Zhan Qiang, Wu Hao, Zhang Liming, Yuan Philip et al. (2021-09)
      3D Concrete Printing with Variable-Width Filament
2692. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
      Material-Informed Formwork Geometry:
      The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
2693. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
      Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing
2694. Galeote Eduardo, Fuente Albert (2021-09)
      Novel Compressive Constitutive-Model for 3D Printed Concrete
2695. Miranda Luiza, Lesage Karel, Schutter Geert (2021-09)
      Understanding the Structural Build-Up-Rate of Cementitious Materials for 3D Printing
2696. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-09)
      Inter-Layer Bond and Porosity of 3D Printed Concrete
2697. Graziano Angelo, Cavaliere Ilaria, Costantino Dario, Fallacara Giuseppe et al. (2021-09)
      Additive Manufacturing in Architecture:
      3D Printing Solutions for Vaulted Spaces
2698. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
      Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture
2699. Albalawi Hamed, Khan Zainab, Valle-Pérez Alexander, Kahin Kowther et al. (2021-09)
      Sustainable and Eco-Friendly Coral Restoration Through 3D Printing and Fabrication
2700. Wi Kwangwoo, Wang Kejin, Taylor Peter, Laflamme Simon et al. (2021-09)
      Properties and Microstructure of Extrusion-Based 3D Printing Mortar Containing a Highly Flowable, Rapid Set Grout
2701. Gülle Nur, Selçuk Semra (2021-08)
      A Bibliometric Analysis on 3D Printed Concrete in Architecture
2702. Khandelwal Vaatsuly, Bhatia Vibhav, Dogra Vinay, Sharma Shivam et al. (2021-08)
      3D Printer Robot for Civil Construction:
      A Bond Graph Approach
2703. Zahabizadeh Behzad, Segundo Iran, Pereira João, Freitas Elisabete et al. (2021-08)
      Development of Photocatalytic 3D Printed Cementitious Mortars:
      Influence of the Curing, Spraying Time-Gaps and TiO2 Coating Rates
2704. Rehman Asif, Sglavo Vincenzo (2021-08)
      3D Printing of Portland-Cement-Containing Bodies
2705. Munir Qaisar, Peltonen Riku, Kärki Timo (2021-08)
      Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams
2706. Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
      Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
      A Cleaner Perspective on 3D Printing
2707. Kazemian Ali, Khoshnevis Behrokh (2021-08)
      Real-Time Extrusion-Quality-Monitoring-Techniques for Construction 3D Printing
2708. Liu Chenkang, Yue Songlin, Zhou Cong, Sun Honglei et al. (2021-08)
      Anisotropic Mechanical Properties of Extrusion-Based 3D Printed Layered Concrete
2709. Umar Tariq (2021-08)
      Key Factors Influencing the Implementation of Three-Dimensional Printing in Construction
2710. Choi Se-Jin, Kim Ji-Hwan, Jeong Hyojin, Lee Ja-Sung et al. (2021-08)
      Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D Printed Capsules for Self-Healing Cement Composites
2711. Zhang Yifan, Aslani Farhad (2021-08)
      Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
2712. Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay, Pasupathy Kirubajiny (2021-08)
      Concrete 3D Printing of Lightweight Elements Using Hollow-Core Extrusion of Filaments
2713. Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Coppola Armando et al. (2021-08)
      Building Envelope Prefabricated with 3D Printing Technology
2714. Che Yujun, Tang Shengwen, Yang Huashan, Li Weiwei et al. (2021-08)
      Influences of Air-Voids on the Performance of 3D Printing Cementitious Materials
2715. Forcael Eric, Pérez Javier, Vásquez Álvaro, García-Alvarado Rodrigo et al. (2021-08)
      Development of Communication Protocols Between BIM Elements and 3D Concrete Printing
2716. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
      In-Process Reinforcing Method:
      Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
2717. Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
      3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials
2718. Zhang Hanghua, Xiao Jianzhuang (2021-08)
      Plastic Shrinkage and Cracking of 3D Printed Mortar with Recycled Sand
2719. Bedarf Patrick, Dutto Alessandro, Zanini Michele, Dillenburger Benjamin (2021-08)
      Foam 3D Printing for Construction:
      A Review of Applications, Materials, and Processes
2720. Babbar Atul, Rai Aryan, Sharma Ankit (2021-08)
      Latest Trend in Building Construction:
      Three-Dimensional Printing
2721. Zhao Zhihui, Chen Mingxu, Zhong Xu, Huang Yongbo et al. (2021-07)
      Effects of Bentonite, Diatomite and Metakaolin on the Rheological Behavior of 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
2722. Wu Yiwen, Liu Chao, Liu Huawei, Zhang Zhenzi et al. (2021-07)
      Study on the Rheology and Buildability of 3D Printed Concrete with Recycled Coarse Aggregates
2723. Scheurer Martin, Quenzel Philipp, Nölke Peter, Reuter‐Schniete Jonas et al. (2021-07)
      Investigating the Feasibility of Using Carbon Fiber Tapes as Reinforcement for 3D Concrete Printing
2724. Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
      Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing
2725. Duarte Gonçalo, Brown Nathan, Memari Ali, Duarte José (2021-07)
      Learning from Historical Structures under Compression for Concrete 3D Printing Construction
2726. Wang Li, Ma Guowei, Liu Tianhao, Buswell Richard et al. (2021-07)
      Inter-Layer Reinforcement of 3D Printed Concrete by the In-Process Deposition of U-Nails
2727. Geetha S., Selvakumar M., Lakshmi S. (2021-07)
      3D Concrete Printing Matrix Reinforced with Geogrid
2728. Kreiger Megan (2021-07)
      Go Big or Go Home:
      Printing Concrete Buildings
2729. Farahbakhsh Mehdi, Borhani Alireza, Kalantar Negar, Rybkowski Zofia (2021-07)
      PRINT in PRINT:
      A Nested Robotic Fabrication-Strategy for 3D Printing Dissolvable Formwork of a Stackable Column
2730. Nedjar Boumediene (2021-07)
      On a Geometrically Non-Linear Incremental Formulation for the Modeling of 3D Concrete Printing
2731. Ki Dongwon, Kang Shin, Park Kwang-Min (2021-07)
      Upcycling of Wastewater Sludge Incineration Ash as a 3D Printing Technology Resource
2732. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-07)
      Fire-Resistance of 3D Printed Concrete Composite Wall Panels Exposed to Various Fire Scenarios
2733. Oktaviani Astiti, Berawi Mohammed (2021-07)
      Implementation of 3D Concrete Printing Technology in Pre-Cast Concrete Mass Production Industry
2734. Lim Taeheun, Kim Seonghoon, Jo Kanghee, Jo Ilguk et al. (2021-07)
      Early Hydration and Mechanical Strength of Calcite-Ettringite-Seeds-Added Cement-Mixture for 3D Printing
2735. Yang Huashan, Che Yujun, Shi Mengyuan (2021-07)
      Influences of Calcium-Carbonate-Nano-Particles on the Workability and Strength of 3D Printing Cementitious Materials Containing Limestone-Powder
2736. Lowke Dirk, Vandenberg Aileen, Pierre Alexandre, Thomas Amaury et al. (2021-07)
      Injection 3D Concrete Printing in a Carrier Liquid:
      Underlying Physics and Applications to Lightweight Space Frame Structures
2737. Rehman Atta, Kim Jung-Hoon (2021-07)
      3D Concrete Printing:
      A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
2738. Yu Shiwei, Xia Ming, Sanjayan Jay, Yang Lin et al. (2021-07)
      Microstructural Characterization of 3D Printed Concrete
2739. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-07)
      Mechanical Characterisation for Numerical Simulation of Extrusion-Based 3D Concrete Printing
2740. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
      From Analytical Methods to Numerical Simulations:
      A Process Engineering Toolbox for 3D Concrete Printing
2741. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom et al. (2021-06)
      Numerical Simulation for 3D Printed Wall Structure During the Process of Printing Considering Uncertainty
2742. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
      Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete
2743. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
      Sustainable Materials for 3D Concrete Printing
2744. Ko Chien-Ho (2021-06)
      Constraints and Limitations of Concrete 3D Printing in Architecture
2745. Caron Jean-François, Demont Léo, Ducoulombier Nicolas, Mesnil Romain (2021-06)
      3D Printing of Mortar with Continuous Fibers:
      Principle, Properties and Potential for Application
2746. Haghighi Azadeh, Mohammed Abdullah, Wang Lihui (2021-06)
      Energy Efficient Multi-Robotic 3D Printing for Large-Scale Construction:
      Could This Technique Contribute to Sustainability of Future Buildings?
2747. Babafemi Adewumi, Kolawole John, Miah Md, Paul Suvash et al. (2021-06)
      A Concise Review on Inter-Layer Bond Strength in 3D Concrete Printing
2748. Nair Sooraj, Panda Subhashree, Tripathi Avinaya, Neithalath Narayanan (2021-06)
      Relating Print-Velocity and Extrusion-Characteristics of 3D Printable Cementitious Binders:
      Implications Towards Testing Methods
2749. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2021-06)
      Technologies for Improving Buildability in 3D Concrete Printing
2750. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
      Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
2751. Hierden Naomi, Gauvin Florent, Lucas Sandra, Salet Theo et al. (2021-06)
      Use of Hemp-Fibers in 3D Printed Concrete
2752. Dai Shuo, Zhu Huajun, Zhai Munan, Wu Qisheng et al. (2021-06)
      Stability of Steel-Slag as Fine Aggregate and Its Application in 3D Printing Materials
2753. Jørgensen Henrik, Douglas Philip, Naboni Roberto (2021-06)
      Experimental Study on the Anisotropic Behavior and Strength of 3D Printed Concrete
2754. Markin Slava, Krause Martin, Otto Jens, Schröfl Christof et al. (2021-06)
      3D Printing with Foam-Concrete:
      From Material Design and Testing to Application and Sustainability
2755. García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda-Pérez Pablo (2021-06)
      Architectural Evaluation of 3D Printed Buildings
2756. Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
      Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis
2757. Kinnell Peter, Dobrzanski James, Xu Jie, Wang Weiqiang et al. (2021-06)
      Precision Manufacture of Concrete Parts Using Integrated Robotic 3D Printing and Milling
2758. Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
      Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
2759. Prasittisopin Lapyote, Sakdanaraseth Thanut, Horayangkura Vimolsiddhi (2021-06)
      Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion
2760. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
      Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
      A Numerical Study
2761. Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
      Large-Scale 3D Printing Concrete Technology:
      Current Status and Future Opportunities
2762. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2021-06)
      Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete:
      Correction
2763. Song Hongwei, Li Xinle (2021-05)
      An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites
2764. Said F., Eldwib Donia, Zaytoun M., Elsalam A. et al. (2021-05)
      3D Printing Concrete Incoroprating Environmentally Friendly Materials
2765. Anane Walid, Iordanova Ivanka, Ouellet-Plamondon Claudiane (2021-05)
      The Use of BIM for Robotic 3D Concrete Printing
2766. Wu Yuching, Yang Qianfan, Kong Xiangrui, Zhi Peng et al. (2021-05)
      Uncertainty Quantification for the Representative Volume Element of Geometrically Mono-Clinic 3D Printed Concrete
2767. Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
      Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing
2768. Pacillo Gerardo, Ranocchiai Giovanna, Loccarini Federica, Fagone Mario (2021-05)
      Additive Manufacturing in Construction:
      A Review on Technologies, Processes, Materials, and Their Applications of 3D and 4D Printing
2769. Na Okpin, Kim Kangmin, Lee Hyunjoo, Lee Hyunseung (2021-05)
      Printability and Setting-Time of CSA Cement with Na2SiO3 and Gypsum for Binder-Jetting 3D Printing
2770. Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
      Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
      Printability and Direction-Dependent Mechanical Performance
2771. Liu Miao, Huang Yimiao, Wang Fang, Sun Junbo et al. (2021-05)
      Tensile and Flexural Properties of 3D Printed Jackets-Reinforced Mortar
2772. Pan Yifan, Zhang Yulu, Zhang Dakang, Song Yuying (2021-05)
      3D Printing in Construction:
      State of the Art and Applications
2773. Javed Ali, Mantawy Islam, Azizinamini Atorod (2021-05)
      3D Printing of Ultra-High-Performance Concrete for Robotic Bridge Construction
2774. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
      Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
2775. Hoffmann Marcin, Żarkiewicz Krzysztof, Zieliński Adam, Skibicki Szymon et al. (2021-05)
      Foundation Piles:
      A New Feature for Concrete 3D Printers
2776. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2021-05)
      Digital Printing of Mortar in Carrier-Liquid:
      Comparison of Approaches to Predict Print Stability
2777. Xiao Jianzhuang, Han Nv, Zhang Lihai, Zou Shuai (2021-05)
      Mechanical and Microstructural Evolution of 3D Printed Concrete with Polyethylene-Fiber and Recycled Sand at Elevated Temperatures
2778. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2021-05)
      Extrusion Rheometer for 3D Concrete Printing
2779. Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
      A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete
2780. Adaloudis Max, Bonnin Roca Jaime (2021-05)
      Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry
2781. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-04)
      Importance and Potential of Cellulosic Materials and Derivatives in Extrusion-Based 3D Concrete Printing:
      Prospects and Challenges
2782. Mechtcherine Viktor (2021-04)
      Digital Building:
      3D Printing with Concrete
2783. Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2021-04)
      Framework for Technical Specifications of 3D Concrete Printers
2784. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
      Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
2785. Zhang Hao, Zhu Liming, Zhang Fan, Yang Mijia (2021-04)
      Effect of Fiber Content and Alignment on the Mechanical Properties of 3D Printing Cementitious Composites
2786. Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
      Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications
2787. Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
      Additive Manufacturing in the Construction Industry:
      The Comparative Competitiveness of 3D Concrete Printing
2788. Ramyar Elham, Xinwei Z., Cusatis Gianluca (2021-04)
      Numerical Simulation of 3D Printing of Infrastructure Materials
2789. Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
      Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements
2790. Pott Ursula, Stephan Dietmar (2021-04)
      Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
2791. Falliano Devid, Domenico Dario, Cosenza Paolo, Ricciardi Giuseppe et al. (2021-04)
      Green High-Performance Mortars for 3D Printing Applications
2792. Zhu Binrong, Nematollahi Behzad, Pan Jinlong, Zhang Yang et al. (2021-04)
      3D Concrete Printing of Permanent Formwork for Concrete Column Construction
2793. Mullett Paul, Ghaffar Seyed, Perry Paul (2021-04)
      Discussion:
      Commentary on 3D Printing Set to Transform the Construction Industry
2794. Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
      Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments
2795. Marchment Taylor, Sanjayan Jay (2021-04)
      Reinforcement Method for 3D Concrete Printing Using Paste-Coated Bar Penetrations
2796. Li Chenshu, Zhou Xiaoyan, Liu Xingyu (2021-04)
      Integrating the Bio-Digital Aesthetic Value and Architecture Potential of Rapid-Liquid-Printed-Concrete 3D Printing Technology
2797. Ning Xin, Liu Tong, Wu Chunlin, Wang Chao (2021-04)
      3D Printing in Construction:
      Current Status, Implementation Hindrances, and Development Agenda
2798. Ting Guan, Tay Yi, Tan Ming (2021-04)
      Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing
2799. Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
      Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
2800. Bedarf Patrick, Schulte Dinorah, Şenol Ayça, Jeoffroy Etienne et al. (2021-04)
      Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel
2801. Zhan Qiang, Zhou Xinjie, Yuan Philip, Zhou Xinjie (2021-04)
      Design and Fabrication of a 3D Concrete Printed Pre-Stressed Bridge
2802. Breseghello Luca, Sanin Sandro, Naboni Roberto (2021-04)
      Tool-Path Simulation, Design and Manipulation in Robotic 3D Concrete Printing
2803. Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
      3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates
2804. Sun Jingting, Xiao Jianzhuang, Li Zhengrong, Feng Xiwen (2021-03)
      Experimental Study on the Thermal Performance of a 3D Printed Concrete Prototype Building
2805. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
      Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
2806. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
      Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
2807. Cohen Zach (2021-03)
      Recasting Concrete:
      A Case Study in Concrete 3D Printing as an Architectural Pedagogy
2808. Shakor Pshtiwan, Gowripalan Nadarajah, Rasouli Habib (2021-03)
      Experimental and Numerical Analysis of 3D Printed Cement Mortar Specimens Using Inkjet 3DP
2809. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2021-03)
      Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete
2810. Katzer Jacek, Skoratko Aneta (2021-03)
      Concept of Using 3D Printing for Production of Concrete-Plastic Columns with Unconventional Cross-Sections
2811. Heifetz Alexander, Shribak Dmitry, Bakhtiari Sasan, Aranson Igor et al. (2021-03)
      Qualification of 3D Printed Mortar with Electrical Conductivity Measurements
2812. Vojir Martin, Myslivec Tomáš, Petr Tomas, Břoušek Josef et al. (2021-03)
      A New Way to Design Software for Industrial Automation:
      3D Printer Cement Mixtures
2813. Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
      Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
2814. Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
      A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments
2815. Teixeira João, Schaefer Cecília, Rangel Bárbara, Alves Jorge et al. (2021-03)
      Development of 3D Printing Sustainable Mortars Based on a Bibliometric Analysis
2816. Krčma Martin, Škaroupka David, Vosynek Petr, Zikmund Tomáš et al. (2021-02)
      Use of Polymer Concrete for Large-Scale 3D Printing
2817. Cui Peng, Wu Chun-ran, Chen Jie, Luo Fuming et al. (2021-02)
      Preparation of Magnesium-Oxysulfate Cement as a 3D Printing Material
2818. Sandeep Bolugoddu, Kannan T., Chandradass J., Ganesan M. et al. (2021-02)
      Scope of 3D Printing in Manufacturing Industries:
      A Review
2819. Canou Joseph, Uhart Maylis, Diaz Pierre (2021-02)
      A “Low-Cost” Subtractive Method for Freshly Finished 3D Concrete Printed Structures
2820. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
      Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
2821. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
      Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
2822. Besklubova Svetlana, Skibniewski Mirosław, Zhang Xueqing (2021-02)
      Factors Affecting 3D Printing Technology Adaptation in Construction
2823. Kondepudi Kala, Subramaniam Kolluru (2021-02)
      Formulation of Alkali-Activated Fly-Ash-Slag Binders for 3D Concrete Printing
2824. Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
      3D Printing in the Construction Industry:
      A Systematic Review of the Thermal Performance in Buildings
2825. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
      Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing
2826. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
      Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
2827. Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
      Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
      A Case Study
2828. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
      Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
2829. Lim Jian, Zhang Xu, Ting Guan, Pham Quang-Cuong (2021-02)
      Stress-Cognizant 3D Printing of Free-Form Concrete Structures
2830. Chen Yu, Çopuroğlu Oğuzhan, Rodríguez Claudia, Filho Fernando et al. (2021-02)
      Characterization of Air-Void Systems in 3D Printed Cementitious Materials Using Optical Image Scanning and X-Ray Computed Tomography
2831. Meurer Maximilian, Claßen Martin (2021-02)
      Mechanical Properties of Hardened 3D Printed Concretes and Mortars:
      Development of a Consistent Experimental Characterization-Strategy
2832. Klyuev Sergey, Klyuev Alexander, Shorstova Elena (2021-02)
      Technology of 3D Printing of Fiber-Reinforced Mixtures
2833. Voney Vera, Odaglia Pietro, Brumaud Coralie, Dillenburger Benjamin et al. (2021-02)
      From Casting to 3D Printing Geopolymers:
      A Proof of Concept
2834. Álvarez-Fernández Martina, Prendes-Gero María, González-Nicieza Celestino, Guerrero-Miguel Diego-José et al. (2021-02)
      Optimum Mix-Design for 3D Concrete Printing Using Mining-Tailings:
      A Case Study in Spain
2835. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
      Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP)
2836. Krishnaraja A., Guru K. (2021-02)
      3D Printing Concrete:
      A Review
2837. Liu Miao, Zhang Qiyun, Tan Zhendong, Wang Li et al. (2021-01)
      Investigation of Steel-Wire-Mesh-Reinforcement Method for 3D Concrete Printing
2838. Weger Daniel, Gehlen Christoph (2021-01)
      Particle-Bed Binding by Selective Paste-Intrusion:
      Strength and Durability of Printed Fine-Grain Concrete Members
2839. Xu Jiabin, Chen Mingxu, Zhao Zhihui, Li Laibo et al. (2021-01)
      Printability and Efflorescence-Control of Admixtures-Modified 3D Printed White Portland-Cement-Based Materials Based on the Response-Surface-Methodology
2840. Wu Weiwei, Wang Zhongyu, Ding Shuang, Song Aiping (2021-01)
      Effect Research of Cement Block on Paste-Flow for 3D Cement Printing Based on an Improved Lattice-Boltzmann Method
2841. Gomaa Mohamed, Jabi Wassim, Veliz-Reyes Alejandro, Soebarto Veronica (2021-01)
      3D Printing System for Earth-Based Construction:
      Case Study of Cob
2842. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
      Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
      A Review
2843. Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
      Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
2844. Tho Tuong, Thinh Nguyen (2021-01)
      Using a Cable-Driven Parallel Robot with Applications in 3D Concrete Printing
2845. Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
      Digital Design Computing and Modelling for 3D Concrete Printing
2846. Muñoz Ivan, Madrid Javier, Muñiz Manuel, Uhart Maylis et al. (2021-01)
      Life Cycle Assessment of Integrated Additive-Subtractive Concrete 3D Printing
2847. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2021-01)
      Uniaxial Load Testing of Large-Scale 3D Printed Concrete Wall and Finite-Element-Model-Analysis
2848. Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
      Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars
2849. Wang Brydon, Rimmer Matthew (2021-01)
      3D Printing and Housing:
      Intellectual Property and Construction Law
2850. Rimmer Matthew (2021-01)
      Automating Fab Cities:
      3D Printing and Urban Renewal
2851. Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
      Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites
2852. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria (2021-01)
      Evaluation of Material-Modification Using PET in 3D Concrete Printing Technology
2853. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-01)
      Weak Inter-Layer Bonding in Extrusion 3D Concrete Printing:
      A Comparative Analysis of Mitigation Techniques
2854. Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
      Biomimicry for 3D Concrete Printing:
      A Review and Perspective
2855. Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
      Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications
2856. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
      3D Concrete Printing Sustainability:
      A Comparative Life Cycle Assessment of Four Construction Method Scenarios
2857. Luhar Salmabanu, Suntharalingam Thadshajini, Navaratnam Satheeskumar, Luhar Ismail et al. (2020-12)
      Sustainable and Renewable Bio-Based Natural Fibers and Its Application for 3D Printed Concrete:
      A Review
2858. Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
      A Review of 3D Printed Concrete:
      Performance-Requirements, Testing Measurements and Mix-Design
2859. Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
      A 3D Concrete Printing Prefabrication Platform for Bespoke Columns
2860. Antoni Antoni, Widjaya David, Wibowo Alexander, Chandra Jimmy et al. (2020-12)
      Using Calcium Oxide and Accelerator to Control the Initial Setting-Time of Mortar in 3D Concrete Printing
2861. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
      A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
2862. Gu Hai, Sun Jianhua, Zhang Jie, Xu Yuanyuan et al. (2020-12)
      Effect of Material-Ratio on the Performances in 3D Cement Printing and Its Optimization
2863. Bohuchval Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2020-12)
      Effect of Metakaolin and Natural Fibers on Three-Dimensional Printing Mortar
2864. Kruger Jacques, Plessis Anton, Zijl Gideon (2020-12)
      An Investigation into the Porosity of Extrusion-Based 3D Printed Concrete
2865. Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
      Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
      An Experimental Study
2866. Putten Jolien, Snoeck Didier, Coensel R., Schutter Geert et al. (2020-12)
      Early-Age Shrinkage Phenomena of 3D Printed Cementitious Materials with Superabsorbent Polymers
2867. Placzek Gerrit, Schwerdtner Patrick (2020-12)
      Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
2868. Kaszyńska Maria, Skibicki Szymon, Hoffmann Marcin (2020-12)
      3D Concrete Printing for Sustainable Construction
2869. Vantyghem Gieljan, Ooms Ticho, Corte Wouter (2020-11)
      VoxelPrint:
      A Grasshopper Plug-In for Voxel-Based Numerical Simulation of Concrete Printing
2870. Ly Océane, Yoris-Nobile Adrian, Sebaibi Nassim, Blanco-Fernandez Elena et al. (2020-11)
      Optimization of 3D Printed Concrete for Artificial Reefs:
      Biofouling and Mechanical Analysis
2871. Jones Scott (2020-11)
      Fused Filament-Fabrication Printer Modified to Dispense Cement-Paste for Concrete Additive Manufacturing Studies
2872. Sauter Andreas, Nasirov Aslan, Fidan Ismail, Allen Michael et al. (2020-11)
      Development, Implementation and Optimization of a Mobile 3D Printing Platform
2873. Krotov Oleg, Lazarev Yuriy, Velichkin Viktor, Petrochenko Marina et al. (2020-11)
      The Multi-Storey Concrete Printing Construction Technology
2874. Dubov Alexey, Ruben Sam, Korshikov Vasily, Ivanova Anna et al. (2020-11)
      3D Printing of Polymers with Continuous Fibers to Replace Steel-Reinforcement and Structural Steel in Construction
2875. Sterckx Peter, Walker Ian (2020-11)
      Modeling and Design-Optimization of Robotic Hoses for 3D Printing of Cement
2876. Xiao Jianzhuang, Liu Haoran, Ding Tao (2020-11)
      Finite-Element-Analysis on the Anisotropic Behavior of 3D Printed Concrete under Compression and Flexure
2877. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2020-11)
      Assessment of Asymmetrical Rheological Behavior of Cementitious Material for 3D Printing Application
2878. Sanjayan Jay, Jayathilakage Roshan, Rajeev Pathmanathan (2020-11)
      Vibration-Induced Active Rheology-Control for 3D Concrete Printing
2879. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2020-11)
      3D Printing with Carbon Concrete:
      Technology and the First Test Results
2880. Bhooshan Shajay, Mele Tom, Block Philippe (2020-11)
      Morph & Slerp:
      Shape Description for 3D Printing of Concrete
2881. Li Leo, Xiao Bofeng, Fang Z., Xiong Z. et al. (2020-11)
      Feasibility of Glass-Basalt Fiber-Reinforced Seawater Coral Sand Mortar for 3D Printing
2882. Joh Changbin, Lee Jungwoo, Bui The, Park Jihun et al. (2020-11)
      Buildability and Mechanical Properties of 3D Printed Concrete
2883. Baz Bilal, Aouad Georges, Khalil Noura, Rémond Sébastien (2020-11)
      Inter-Layer Reinforcement of 3D Printed Concrete Elements
2884. Sun Xiaoyan, Gao Chao, Wang Hailong (2020-10)
      Bond-Performance Between BFRP-Bars and 3D Printed Concrete
2885. Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2020-10)
      A Systematic Review of the Geographic and Chronological Distributions of 3D Concrete Printers from 1997 to 2020
2886. Mohamed Shibly Maahir, Soto Borja (2020-10)
      Threat Modeling in Construction:
      An Example of a 3D Concrete Printing System
2887. Xu Xuchu, Wang Ruoyu, Cao Qiming, Feng Chen (2020-10)
      Towards 3D-Perception and Closed-Loop-Control for 3D Construction Printing
2888. Craveiro Flávio, Bártolo Helena, Duarte José, Bartolo Paulo (2020-10)
      A Multi-Material Extrusion-Nozzle for Functionally-Graded Concrete Printing
2889. Tay Yi, Panda Biranchi, Ting Guan, Ahamed N. et al. (2020-10)
      3D Printing for Sustainable Construction
2890. Florea Vitalie, Păuleţ-Crăiniceanu Fideliu, Luca Septimiu-George, Pastia Cristian (2020-10)
      3D Printing of Buildings:
      Limits, Design, Advantages and Disadvantages
2891. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
      Extrusion-Based Concrete 3D Printing from a Material Perspective:
      A State of the Art Review
2892. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-10)
      Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics
2893. Alchaar Aktham, Tamimi Adil (2020-10)
      Mechanical Properties of 3D Printed Concrete in Hot Temperatures
2894. Hossain Md., Zhumabekova Altynay, Paul Suvash, Kim Jong (2020-10)
      A Review of 3D Printing in Construction and Its Impact on the Labor Market
2895. Dwivedi Ashutosh, Pal Ankit, Patel Shiv, Chourasia Ajay et al. (2020-10)
      Evaluation of Model 3D Printer and Design Mix for 3D Concrete Printing
2896. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
      Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose
2897. Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
      Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing
2898. Kuzmenko Kateryna, Gaudillière-Jami Nadja, Féraille Adélaïde, Dirrenberger Justin et al. (2020-09)
      Assessing the Environmental Viability of 3D Concrete Printing Technology
2899. Leschok Matthias, Dillenburger Benjamin (2020-09)
      Sustainable Thin-Shell 3D Printed Formwork for Concrete
2900. Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
      Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer
2901. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
      3D Printed Concrete for Large-Scale Buildings:
      An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects
2902. Heras Murica Daniel, Genedy Moneeb, Taha Mahmoud (2020-09)
      Examining the Significance of Infill-Printing-Pattern on the Anisotropy of 3D Printed Concrete
2903. Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
      Layer-Interface Properties in 3D Printed Concrete:
      Dual Hierarchical Structure and Micromechanical Characterization
2904. Anton Ana-Maria, Bedarf Patrick, Yoo Angela, Dillenburger Benjamin et al. (2020-09)
      Concrete Choreography:
      Prefabrication of 3D Printed Columns
2905. Xu Weiguo, Gao Yuan, Sun Chenwei, Wang Zhi (2020-09)
      Fabrication and Application of 3D Printed Concrete Structural Components in the Boshan Pedestrian Bridge Project
2906. Marchment Taylor, Sanjayan Jay (2020-09)
      Bond Properties of Reinforcing Bar Penetrations in 3D Concrete Printing
2907. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
      Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing
2908. Sharma Shivam, Mitra Soham, Adesina Adeyemi, Das Sreekanta (2020-09)
      Construction Industry with 3D Printer:
      A New Era
2909. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-09)
      Reinforcement-Strategies for 3D Concrete Printing
2910. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
      3D Recycled Mortar Printing:
      System-Development, Process-Design, Material-Properties and On-Site-Printing
2911. Šavija Branko (2020-09)
      Use of 3D Printing to Create Multi-Functional Cementitious Composites:
      Review, Challenges and Opportunities
2912. Phadnis Kedar, Shariff Najeeb, Menon Devdas (2020-09)
      Optimal Rate of Printing of 3D Printed Concrete Columns and Walls to Avoid Buckling
2913. Pudjisuryadi Pamuda, Antoni Antoni, Chandra Jimmy (2020-09)
      Review on 3D Printed Concrete as Structural Beam Members
2914. Mahadevan Meera, Francis Ann, Thomas Albert (2020-08)
      A Simulation-Based Investigation of Sustainability Aspects of 3D Printed Structures
2915. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
      Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
2916. Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
      Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete
2917. Smarsly Kay, Peralta Patricia, Luckey Daniel, Heine Sebastian et al. (2020-08)
      BIM-Based Concrete Printing
2918. Ortega Guillermo, Madrid Javier, Olsson Nils, Tenorio Ríos José (2020-08)
      The Application of 3D Printing Techniques in the Manufacturing of Cement-Based Construction Products and Experiences Based on the Assessment of Such Products
2919. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
      Plastic Shrinkage Cracking in 3D Printed Concrete
2920. Nicholas Paul, Rossi Gabriella, Williams Ella, Bennett Michael et al. (2020-08)
      Integrating Real-Time Multi-Resolution Scanning and Machine Learning for Conformal Robotic 3D Printing in Architecture
2921. Claßen Martin, Claßen Johannes, Sharma Rahul (2020-08)
      Conception of a Real World 3D Printing Method for Reinforced Concrete (AMoRC)
2922. Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
      Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers
2923. Yang Huashan, Li Weiwei, Che Yujun (2020-08)
      3D Printing Cementitious Materials Containing Nano-CaCO3:
      Workability, Strength, and Microstructure
2924. Nething Christoph, Smirnova Maya, Gröning Janosch, Haase Walter et al. (2020-08)
      A Method for 3D Printing Bio-Cemented Spatial Structures Using Sand and Urease-Active-Calcium-Carbonate-Powder
2925. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
      Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
2926. Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
      Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder
2927. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
      Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
      An Experimental and Numerical Study
2928. Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
      Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
      A Review
2929. Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
      Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials
2930. Fioretti Marta, Kompella Sriram, Monte Francesco, Esposito Laura et al. (2020-07)
      Experimental Investigation on the Early-Age Tensile Strength of Fiber-Reinforced Mortar Used in 3D Concrete Printing
2931. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-07)
      Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters
2932. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
      Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
2933. Falliano Devid, Crupi Giuseppe, Domenico Dario, Ricciardi Giuseppe et al. (2020-07)
      Investigation on the Rheological Behavior of Lightweight Foamed Concrete for 3D Printing Applications
2934. Hack Norman, Kloft Harald (2020-07)
      Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
      A Real-Scale Demonstrator
2935. Beersaerts Glenn, Lucas Sandra, Pontikes Yiannis (2020-07)
      An Fe-Rich Slag-Based Mortar for 3D Printing
2936. Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2020-07)
      Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process
2937. Bekkering Juliette, Kuit Barbara, Biffi Alessia, Ahmed Zeeshan (2020-07)
      Architectonic Explorations of the Possibilities of 3D Concrete Printing:
      The Historic Building Fragment as Inspiration for New Applications with 3D Concrete Printing in Architecture
2938. Hondt Mélody, Rémond Sébastien, Leblond Philippe, Iea Bunthan et al. (2020-07)
      Fire Behavior of a Printed Sample for Building
2939. Esposito Laura, Menna Costantino, Asprone Domenico, Rossino Chiara et al. (2020-07)
      An Experimental Testing Procedure to Assess the Buildability Performance of 3D Printed Concrete Elements
2940. Brun Francis, Gaspar Florindo, Mateus Artur, Vitorino João et al. (2020-07)
      Experimental Study on 3D Printing of Concrete with Overhangs
2941. Douba AlaEddin, Chan Clare, Berrios Stephanie, Kawashima Shiho (2020-07)
      Synthesis of Hybridized Rheological Modifiers for 3D Concrete Printing
2942. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2020-07)
      3D Printing of a Cement-Based Mortar in a Complex Fluid Suspension:
      Analytical Modeling and Experimental Tests
2943. Jiramarootapong Patiphat, Prasittisopin Lapyote, Snguanyat Chalermwut, Tanapornraweekit Ganchai et al. (2020-07)
      Load Carrying Capacity and Failure Mode of 3D Printing Mortar Wall Panel Under Axial Compression Loading
2944. Kinomura Koji, Murata Satoshi, Yamamoto Yujin, Obi Hirotoshi et al. (2020-07)
      Application of 3D Printed Segments Designed by Topology-Optimization-Analysis to a Practical-Scale Pre-Stressed Pedestrian Bridge
2945. Blaakmeer Jan, Lobo B. (2020-07)
      A Robust Mortar and Printing System
2946. Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
      Print-Cast Concrete:
      Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
2947. Geneidy Omar, Kumarji Sujay, Dubor Alexandre, Sollazzo Aldo (2020-07)
      Simultaneous Reinforcement of Concrete While 3D Printing
2948. Cascone Paolo, Laddaga Maddalena, Forestiero Federico (2020-07)
      Digital Construction:
      3D Printing for Performative Houses
2949. Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2020-07)
      Physico-Chemical Characterization at Early-Age of 3D Printed Mortar
2950. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2020-07)
      Characterizing Extrudability for 3D Concrete Printing Using Discrete Element Simulations
2951. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
      Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
      Ultra-Thin, 3D Printed Formwork
2952. Marchment Taylor, Sanjayan Jay (2020-07)
      Penetration Reinforcing Method for 3D Concrete Printing
2953. Pattaje Sooryanarayana Karthik, Stynoski Peter, Lange David (2020-07)
      Effect of Vibration on the Rheology of Concrete for 3D Printing
2954. Pekuss Raitis, Soto Borja (2020-07)
      Preliminary Productivity-Analysis of Conventional, Pre-Cast and 3D Printing Production-Techniques for Concrete Columns with Simple Geometry
2955. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-07)
      Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D Printing Cementitious Mixtures
2956. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-07)
      Buildability of Geopolymer Concrete for 3D Printing with Microwave-Heating
2957. Prasittisopin Lapyote, Pongpaisanseree Kittisak, Jiramarootapong Patiphat, Snguanyat Chalermwut (2020-07)
      Thermal- and Sound-Insulation of Large-Scale 3D Extrusion-Printing Wall-Panel
2958. Napolitano Rosanna, Menna Costantino, Forni Daniele, Asprone Domenico et al. (2020-07)
      Dynamic Behavior of Layered 3D Printed Concrete Elements
2959. Natanzi Atteyeh, McNally Ciaran (2020-07)
      Characterising Concrete Mixes for 3D Printing
2960. Odaglia Pietro, Voney Vera, Dillenburger Benjamin, Habert Guillaume (2020-07)
      Advances in Binder-Jet 3D Printing of Non-Cementitious Materials
2961. Sergis Vasileios, Charrier Malo, Ouellet-Plamondon Claudiane (2020-07)
      Prediction of the Yield-Stress of Printing Mortar-Ink
2962. Ramani Ayyagari, Soto Borja (2020-07)
      Preliminary Study of the Implications of 3D Printing on the Construction Supply Chain
2963. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
      Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
2964. Mohammad Malek, Masad Eyad, Seers Thomas, Ghamdi Sami (2020-07)
      High-Performance Lightweight Concrete for 3D Printing
2965. Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
      Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
      Effects of Curing Condition and Print-Time Interval
2966. Kuzmenko Kateryna, Féraille Adélaïde, Baverel Olivier, Roussel Nicolas (2020-07)
      Environmental Impacts of 6-Axis Robotic Arm for 3D Concrete Printing
2967. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
      Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
      A First Feasibility Study
2968. Voney Vera, Odaglia Pietro, Brumaud Coralie, Dillenburger Benjamin et al. (2020-07)
      Geopolymer Formulation for Binder-Jet 3D Printing
2969. Wang Yu, Li Shuaishuai, Qin Tian, Yu Ying et al. (2020-07)
      Concrete 3D Printing:
      System Development, Process Planning and Experimental Results
2970. Zuo Wenqiang, Dong Chenghao, Keita Emmanuel, Roussel Nicolas (2020-07)
      Penetration Study of Liquid in Powder-Bed for 3D Powder-Bed Printing
2971. Yu Shiwei, Sanjayan Jay, Du Hongjian (2020-07)
      Impact of Particle-Size and Grading on Aggregate-Bed 3D Concrete Printing
2972. Wu Yun-Chen, Cotrell Jason, Li Mo (2020-07)
      Inter-Layer Effect on Fracture Behavior of 3D Printing Concrete
2973. Verian Kho, Ashcroft Jarron, Carli Matthew, Bright Randall et al. (2020-07)
      Improving the Bonding Adhesion of the Cold Joints of Normal and Lightweight 3D Printing Mortars
2974. Zuo Wenqiang, Keita Emmanuel, Bornert Michel, Roussel Nicolas (2020-07)
      Drying of 3D Printed Mortar Filaments at Early-Age Assessed by X-Ray Computed Tomography
2975. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
      Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing
2976. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
      Lightweight Concrete 3D Printing by Selective Cement-Activation:
      Investigation of Thermal Conductivity, Strength and Water-Distribution
2977. Buswell Richard, Kinnell Peter, Xu Jie, Hack Norman et al. (2020-07)
      Inspection Methods for 3D Concrete Printing
2978. Bos Freek, Dezaire Steven, Ahmed Zeeshan, Hoekstra Anne et al. (2020-07)
      Bond of Reinforcement-Cable in 3D Printed Concrete
2979. Kruger Jacques, Cicione Antonio, Bester Frederick, Heever Marchant et al. (2020-07)
      Facilitating Ductile Failure of 3D Printed Concrete Elements in Fire
2980. Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
      3D Concrete Printing:
      Free-Form Geometries with Improved Ductility and Strength
2981. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
      Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
2982. Bester Frederick, Heever Marchant, Kruger Jacques, Cho Seung et al. (2020-07)
      Steel-Fiber Links in 3D Printed Concrete
2983. Hass Lauri, Bos Freek (2020-07)
      Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete
2984. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2020-07)
      Printed Concrete as Formwork-Material:
      A Preliminary Study
2985. Grasser Georg, Pammer Lorenz, Köll Harald, Werner E. et al. (2020-07)
      Complex Architecture in Printed Concrete:
      The Case of the Innsbruck University 350th Anniversary Pavilion COHESION
2986. Heever Marchant, Bester Frederick, Pourbehi Mohammad, Kruger Jacques et al. (2020-07)
      Characterizing the Fissility of 3D Concrete Printed Elements via the Cohesive Zone Method
2987. Wang Weiqiang, Konstantinidis Nikolaos, Austin Simon, Buswell Richard et al. (2020-07)
      Flexural Behavior of AR-Glass-Textile-Reinforced 3D Printed Concrete Beams
2988. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-07)
      2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste-Intrusion
2989. Putten Jolien, Olmen Alex, Aerts Marijke, Ascione Emiel et al. (2020-07)
      3D Concrete Printing On-Site:
      A Novel Way of Building Houses?
2990. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
      Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
2991. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
      Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete
2992. Andersen Sebastian, Silva Wilson, Paegle Ieva, Nielsen Jens (2020-07)
      Numerical Model Describing the Early-Age Behavior of 3D Printed Concrete:
      Work in Progress
2993. Duballet Romain, Mesnil Romain, Ducoulombier Nicolas, Carneau Paul et al. (2020-07)
      Free Deposition-Printing for Space-Truss-Structures
2994. Carneau Paul, Mesnil Romain, Ducoulombier Nicolas, Roussel Nicolas et al. (2020-07)
      Characterisation of the Layer-Pressing-Strategy for Concrete 3D Printing
2995. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
      Sustainable Reinforced Concrete Beams:
      Mechanical Optimization and 3D Printed Formwork
2996. Hameed Rashid, Papon Aurélie, Perrot Arnaud, Rangeard Damien (2020-07)
      Effect of Metallic Fibers on the Print Quality and Strength of 3D Printed Concrete
2997. Putten Jolien, Volder Melissa, Heede Philip, Schutter Geert et al. (2020-07)
      3D Printing of Concrete:
      The Influence on Chloride Penetration
2998. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
      Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
      Experiments and Modelling
2999. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
      Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
3000. Vantyghem Gieljan, Steeman Marijke, Corte Wouter, Boel Veerle (2020-07)
      Design-Optimization for 3D Concrete Printing:
      Improving Structural and Thermal Performances
3001. Hassan Hilal, Najjar Fady, Jassmi Hamad, Ahmed Waleed (2020-07)
      Fresh and Hardened Properties of 3D Printed Concrete Made with Dune Sand
3002. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-07)
      Strategies for the Reinforcement for 3D-Concrete-Printing
3003. Wan Qian, Wang Li, Ma Guowei (2020-07)
      Adaptable Tool-Path-Planning Method for 3D Concrete Printing Based on the Mapping Method
3004. Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
      Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing
3005. Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
      Elastic Buckling and Plastic Collapse During 3D Concrete Printing
3006. Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
      Hardened Properties of Layered 3D Printed Concrete with Recycled Sand
3007. He Lewei, Chow Wai, Li Hua (2020-06)
      Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste
3008. Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
      Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
3009. Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
      Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
      Quantifying Contour-Deviation and Mechanical Properties
3010. Kim Seonghoon, Kim Taewook, Kim Buyoung, Kim Hong-dae et al. (2020-06)
      Early Hydration and Hardening of OPC-CSA Blends for Cementitious Structure of 3D Printing
3011. Federowicz Karol, Kaszyńska Maria, Zieliński Adam, Hoffmann Marcin (2020-06)
      Effect of Curing Methods on Shrinkage Development in 3D Printed Concrete
3012. Xu Jie, Buswell Richard, Kinnell Peter, Biro Istvan et al. (2020-06)
      Inspecting Manufacturing Precision of 3D Printed Concrete Parts Based on Geometric Dimensioning and Tolerancing
3013. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Zaker Zafar et al. (2020-06)
      Orbital Overlapping Through Induction Bonding Overcomes the Intrinsic Delamination of 3D Printed Cementitious Binders
3014. Putten Jolien, Azima M., Heede Philip, Mullem T. et al. (2020-06)
      Neutron-Radiography to Study the Water-Ingress via the Inter-Layer of 3D Printed Cementitious Materials for Continuous Layering
3015. Alhumayani Hashem, Gomaa Mohamed, Soebarto Veronica, Jabi Wassim (2020-06)
      Environmental Assessment of Large-Scale 3D Printing in Construction:
      A Comparative Study between Cob and Concrete
3016. Krupík Pavel (2020-06)
      3D Printers as Part of Construction 4.0 with a Focus on Transport Constructions
3017. Lowke Dirk, Talke Daniel, Mai (née Dressler) Inka, Weger Daniel et al. (2020-05)
      Particle-Bed 3D Printing by Selective Cement-Activation:
      Applications, Material and Process Technology
3018. Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
      Additive Manufacturing of Reinforced Concrete:
      Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
3019. Guamán-Rivera Robert, García-Alvarado Rodrigo, Martínez-Rocamora Alejandro, Cheein Fernando (2020-05)
      A Comprehensive Performance Evaluation of Different Mobile Manipulators Used as Displaceable 3D Printers of Building Elements for the Construction Industry
3020. Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
      A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders
3021. Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
      Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing
3022. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-05)
      Effectiveness of the Rheometric Methods to Evaluate the Build-Up of Cementitious Mortars Used for 3D Printing
3023. Vishruthi M., Raghavendra S., Ravi Teja Y., Anand K. (2020-05)
      Evaluation of Cementitious Mixes for Printing
3024. Assaad Joseph, Yassin Abdallah, Sakka Fatima, Hamzeh Farook (2020-05)
      A Modular Approach for Steel Reinforcing of 3D Printed Concrete:
      Preliminary Study
3025. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
      Mechanical Behavior of Printed Strain-Hardening Cementitious Composites
3026. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
      Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
3027. Assaad Joseph, Hamzeh Farook, Hamad Bilal (2020-05)
      Qualitative Assessment of Interfacial Bonding in 3D Printing Concrete Exposed to Frost-Attack
3028. He Yawen, Zhang Yamei, Zhang Chao, Zhou Hongyu (2020-05)
      Energy-Saving-Potential of 3D Printed Concrete Building with Integrated Living Wall
3029. Cohen Zach, Carlson Nicholas (2020-05)
      Piling and Pressing:
      Towards a Method of 3D Printing Reinforced Concrete Columns
3030. Cicione Antonio, Kruger Jacques, Walls Richard, Zijl Gideon (2020-05)
      An Experimental Study of the Behavior of 3D Printed Concrete at Elevated Temperatures
3031. Kontovourkis Odysseas, Phocas Marios, Tryfonos George, Georgiou Christos (2020-05)
      Multi-Axis 3D Printing of Material-Reduced Shell-Structures on a Reconfigurable Supporting-System Using Topology-Optimization Principles
3032. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
      Mechanical Assessment of Concrete:
      Steel Bonding in 3D Printed Elements
3033. Allouzi Rawan, Azhari Wael, Allouzi Rabab (2020-05)
      Conventional Construction and 3D Printing:
      A Comparison Study on Material-Cost in Jordan
3034. Albar Abdulrahman, Chougan Mehdi, Kheetan Mazen, Swash Mohammad et al. (2020-04)
      Effective Extrusion-Based 3D Printing System Design for Cementitious-Based Materials
3035. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
      Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
3036. Khan Mohd (2020-04)
      Mix Suitable for Concrete 3D Printing:
      A Review
3037. Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2020-04)
      Additive Manufacturing of Cantilever:
      From Masonry to Concrete 3D Printing
3038. Khan Mohammad, Sanchez Florence, Zhou Hongyu (2020-04)
      3D Printing of Concrete:
      Beyond Horizons
3039. Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
      Eggshell:
      Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
3040. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
      Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
3041. Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
      Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper
3042. Gaudillière-Jami Nadja, Dirrenberger Justin, Duballet Romain, Bouyssou Charles et al. (2020-04)
      Industrialising Concrete 3D Printing
3043. Jagoda Jeneé, Diggs-McGee Brandy, Kreiger Megan, Schuldt Steven (2020-04)
      The Viability and Simplicity of 3D Printed Construction:
      A Military Case Study
3044. Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
      The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites
3045. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
      Steel-Fiber-Reinforced 3D Printed Concrete:
      Influence of Fiber Sizes on Mechanical Performance
3046. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
      Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
3047. Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
      Nailing of Layers:
      A Promising Way to Reinforce Concrete 3D Printing Structures
3048. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
      Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
3049. Özalp Fatih, Yılmaz Halit (2020-03)
      Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications
3050. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Cunha Vítor (2020-03)
      Inverse Analysis of Three-Point Bending Tests for 3D Printed Fiber-Reinforced Mortars
3051. Ding Tao, Xiao Jianzhuang, Qin Fei, Duan Zhenhua (2020-03)
      Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early-Ages
3052. Manikandan Karthick, Wi Kwangwoo, Zhang Xiao, Wang Kejin et al. (2020-03)
      Characterizing Cement Mixtures for Concrete 3D Printing
3053. Otto Jens, Kortmann Jan, Krause Martin (2020-03)
      Cost Calculation of Concrete 3D Printing
3054. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2020-03)
      An Overview of the Execution of 3D Printed Sub-Scale Habitat on Mars:
      A Case Study to Exemplify the Automated Construction Process
3055. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
      Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
3056. Sun Xiaoyan, Wang Qun, Wang Hailong, Chen Long (2020-03)
      Influence of Multi-Walled Nanotubes on the Fresh and Hardened Properties of a 3D Printing PVA Mortar Ink
3057. Jo Jun, Jo Byung, Cho Woohyun, Kim Jung-Hoon (2020-03)
      Development of a 3D Printer for Concrete Structures:
      Laboratory Testing of Cementitious Materials
3058. Hack Norman, Mai (née Dressler) Inka, Brohmann Leon, Gantner Stefan et al. (2020-03)
      Injection 3D Concrete Printing (I3DCP):
      Basic Principles and Case Studies
3059. Wang Li, Tian Zehao, Ma Guowei, Zhang Mo (2020-02)
      Inter-Layer Bonding Improvement of 3D Printed Concrete with Polymer-Modified Mortar:
      Experiments and Molecular Dynamics Studies
3060. Vergara Luis, Colorado Henry (2020-02)
      Portland 3D Printing of Portland-Cement-Pastes with Additions of Kaolin, Superplastificant, and Calcium-Carbonate
3061. Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
      An Automated System for 3D Printing Functionally Graded Concrete-Based Materials
3062. Lu Bing, Zhu Weiping, Weng Yiwei, Liu Zhixin et al. (2020-02)
      Study of MgO-Activated-Slag as a Cementless Material for Sustainable Spray-Based 3D Printing
3063. Alkhalidi Ammar, Hatuqay Dina (2020-02)
      Energy Efficient 3D Printed Buildings:
      Material and Techniques Selection Worldwide Study
3064. Wang Li, Jiang Hailong, Li Zhijian, Ma Guowei (2020-02)
      Mechanical Behaviors of 3D Printed Lightweight Concrete Structure with Hollow Section
3065. Verian Kho, Kowaleski Scott, Carli Matthew, Bright Randall et al. (2020-02)
      Properties of 3D Printing Mortar with the Development of a 3D Construction Printing Delivery System
3066. Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
      A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
3067. Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
      Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control
3068. Akulova I., Slavcheva Galina (2020-02)
      Methodical Approach to Calculation of the Maintenance Cost for 3D Built Printing Equipment
3069. Aghimien Douglas, Aigbavboa Clinton, Aghimien Lerato, Thwala Wellington et al. (2020-01)
      Making a Case for 3D Printing for Housing Delivery in South Africa
3070. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
      Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing
3071. Li Zhijian, Wang Li, Ma Guowei (2020-01)
      Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
3072. Kosson Michael, Brown Lesa, Sanchez Florence (2020-01)
      Early-Age Performance of 3D Printed Carbon-Nano-Fiber and Carbon Micro-Fiber Cement Composites
3073. Chen Mingxu, Liu Bo, Li Laibo, Cao Lidong et al. (2020-01)
      Rheological Parameters, Thixotropy and Creep of 3D Printed Calcium-Sulfoaluminate-Cement Composites Modified by Bentonite
3074. Shakor Pshtiwan, Nejadi Shami, Sutjipto Sheila, Paul Gavin et al. (2020-01)
      Effects of Deposition-Velocity in the Presence-Absence of E6-Glass-Fiber on Extrusion-Based 3D Printed Mortar
3075. Vantyghem Gieljan, Corte Wouter, Shakour Emad, Amir Oded (2020-01)
      3D Printing of a Post-Tensioned Concrete Girder Designed by Topology-Optimization
3076. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
      The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing
3077. Baz Bilal, Aouad Georges, Rémond Sébastien (2020-01)
      Effect of the Printing Method and Mortar’s Workability on Pull-Out Strength of 3D Printed Elements
3078. Ma Guowei, Li Yanfeng, Wang Li, Zhang Junfei et al. (2020-01)
      Real-Time Quantification of Fresh and Hardened Mechanical Property for 3D Printing Material by Intellectualization with Piezoelectric Transducers
3079. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
      Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing
3080. Bos Freek, Ahmed Zeeshan, Rodríguez Claudia, Figueiredo Stefan (2019-12)
      3D Concrete Printing for Structural Applications
3081. Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
      3D Printed Concrete:
      Applications, Performance, and Challenges
3082. Wi Kwangwoo, Suresh Vignesh, Wang Kejin, Li Beiwen et al. (2019-12)
      Quantifying Quality of 3D Printed Clay Objects Using a 3D Structured Light Scanning System
3083. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-12)
      Comparison of Rheology Measurement Techniques Used in 3D Concrete Printing Applications
3084. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-12)
      Evaluation of the Mechanical Properties of a 3D Printed Mortar
3085. Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2019-12)
      Quantitative Evaluation of Buildability in 3D Concrete Printing Based on Shear-Vane-Test
3086. Pham Luong, Lin Xiaoshan, Gravina R., Tran Jonathan (2019-12)
      Influence of PVA- and PP-Fibers at Different Volume Fractions on Mechanical Properties of 3D Printed Concrete
3087. Yassin Abdallah, Hamzeh Farook, Sakka Fatima (2019-12)
      Agent-Based Modeling to Optimize Workflow of Robotic Steel and Concrete 3D Printers
3088. Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
      3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
3089. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-11)
      Investigation into the Effect of Delays Between Printed Layers on the Mechanical Strength of Inkjet 3DP Mortar
3090. Kontovourkis Odysseas, Tryfonos George (2019-11)
      Robotic 3D Clay Printing of Prefabricated Non-Conventional Wall Components Based on a Parametric-Integrated Design
3091. Kloft Harald, Hack Norman, Mainka Jeldrik, Brohmann Leon et al. (2019-11)
      Additive Manufacturing in Construction:
      First 3D-Printed Reinforced Concrete Components Using Shotcrete 3D Printing (SC3DP) Technology
3092. Freire Tiago, Brun Francis, Mateus Artur, Gaspar Florindo (2019-11)
      3D Printing Technology in the Construction Industry
3093. Tiryaki Mehmet, Zhang Xu, Pham Quang-Cuong (2019-11)
      Printing-While-Moving:
      A New Paradigm for Large-Scale Robotic 3D Printing
3094. Annappa Vani, Gaspar Florindo, Mateus Artur, Vitorino João (2019-11)
      3D Printing for Construction Using Stone Sludge
3095. Nerella Venkatesh, Krause Martin, Mechtcherine Viktor (2019-11)
      Direct Printing-Test for Buildability of 3D Printable Concrete Considering Economic Viability
3096. Marczyk Joanna, Ziejewska Celina, Łach Michał, Korniejenko Kinga et al. (2019-11)
      Possibilities of Using the 3D Printing Process in the Concrete and Geopolymers Application
3097. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
      A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods
3098. Markin Slava, Šahmenko Genādijs, Nerella Venkatesh, Näther Mathias et al. (2019-11)
      Investigations on the Foam-Concrete Production Techniques Suitable for 3D Printing with Foam-Concrete
3099. Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
      Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing
3100. Marchment Taylor, Sanjayan Jay (2019-10)
      Mesh Reinforcing Method for 3D Concrete Printing
3101. Celorrio-Barragué Luis, Calvo-Simón Sergio, Gaspar Marcelo, Vidal-Cortés Mariano et al. (2019-10)
      3D Printed Models-Based Lab Activities to Enhance Learning-Teaching Processes in Structural Engineering Courses
3102. Lim Jian, Weng Yiwei, Pham Quang-Cuong (2019-10)
      3D Printing of Curved Concrete Surfaces Using Adaptable Membrane Formwork
3103. Chen Mingxu, Li Laibo, Wang Jiaao, Huang Yongbo et al. (2019-10)
      Rheological Parameters and Building Time of 3D Printing Sulphoaluminate-Cement-Paste Modified by Retarder and Diatomite
3104. Albar Abdulrahman, Swash Mohammad, Ghaffar Seyed (2019-10)
      The Design and Development of an Extrusion-System for 3D Printing Cementitious Materials
3105. Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2019-10)
      An Exploration of 3D Printing Design Space Inspired by Masonry
3106. Jipa Mihail-Andrei, Calvo Barentin Cristian, Lydon Gearóid, Rippmann Matthias et al. (2019-10)
      3D Printed Formwork for Integrated Funicular Concrete Slabs
3107. Falliano Devid, Sciarrone Antonino, Domenico Dario, Maugeri Natale et al. (2019-10)
      Fiber-Reinforced Lightweight Foamed Concrete Panels Suitable for 3D Printing Applications
3108. Putten Jolien, Deprez Maxim, Cnudde Veerle, Schutter Geert et al. (2019-09)
      Microstructural Characterization of 3D Printed Cementitious Materials
3109. Dorn Tobias, Hirsch Tamino, Stephan Dietmar (2019-09)
      Study on the Influence of Accelerators on the Hydration of Portland Cement and Their Applicability in 3D Printing
3110. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2019-09)
      Predication of Strength-Based Failure in Extrusion-Based 3D Concrete Printing
3111. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
      Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
3112. Panda Biranchi, Mohamed Nisar, Tan Ming (2019-09)
      Rheology and Structural Rebuilding of One-Part Geopolymer Mortar in the Context of 3D Concrete Printing
3113. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
      Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
3114. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-09)
      Quantifying Constructability Performance of 3D Concrete Printing via Rheology-Based Analytical Models
3115. Sanguinetti Paola, Almazam Khaled, Humaidan Omar, Colistra Joe et al. (2019-09)
      Evaluating the Potential of High-Performance Concrete 3D Printed Affordable Zero Energy Homes
3116. Jendele Libor, Červenka Jan, Vaitová Michaela (2019-09)
      FEM Modelling of Digitally Printed Concrete Structures Using 3D-Extrusion
3117. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
      The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
3118. Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
      Large-Scale Digital Concrete Construction:
      CONPrint3D Concept for On-Site, Monolithic 3D Printing
3119. Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
      Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing
3120. Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
      Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing
3121. Yuan Qiang, Li Zemin, Zhou Dajun, Huang Tingjie et al. (2019-08)
      A Feasible Method for Measuring the Buildability of Fresh 3D Printing Mortar
3122. Yao Yue, Hu Mingming, Maio Francesco, Cucurachi Stefano (2019-08)
      Life Cycle Assessment of 3D Printing Geopolymer Concrete:
      An Ex‐Ante Study
3123. Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
      Strength Development Characteristics of SBR-Modified Cementitious Mixtures for 3D Concrete Printing
3124. Silva Wilson, Fryda Hervé, Bousseau Jean-Noël, Andreani Pierre-Antoine et al. (2019-07)
      Evaluation of Early-Age Concrete Structural Build-Up for 3D Concrete Printing by Oscillatory Rheometry
3125. Meng Xiangcheng, Zhang Xueqing (2019-07)
      Case-Study-Analysis for Development-Strategies of Construction 3D Printing
3126. Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
      A Review of the Current Progress and Application of 3D Printed Concrete
3127. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
      3D Concrete Printing:
      A Lower-Bound Analytical Model for Buildability-Performance-Quantification
3128. Sakka Fatima, Assaad Joseph, Hamzeh Farook, Nakhoul Charbel (2019-07)
      Thixotropy and Interfacial Bond Strengths of Polymer-Modified Printed Mortars
3129. Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
      Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials
3130. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
      Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
3131. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
      The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
3132. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2019-06)
      Processing of Cementitious Materials for 3D Concrete Printing
3133. Ducoulombier Nicolas (2019-06)
      Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction
3134. Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
      Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing
3135. Jipa Mihail-Andrei, Giacomarra Federico, Giesecke Rena, Chousou Georgia et al. (2019-06)
      3D Printed Formwork for Bespoke Concrete Stairs
3136. Hirayama Yuta, Zhang Jiali, Kawahara Yoshihiro (2019-06)
      A Method to Evaluate the Formability and Fluidity of Concrete-Based Materials for 3D Printing
3137. Moreira Jr. Amarildo, Santos Francielle (2019-06)
      Automatization of the Constructive Process:
      A Systematic Study of the 3D Concrete Printing Technology (Contour Crafting)
3138. Xu Yading, Šavija Branko (2019-06)
      Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
      Mechanical Properties
3139. Wolfs Robert, Suiker Akke (2019-06)
      Structural Failure During Extrusion-Based 3D Printing Processes
3140. Lu Hongqian, Li Qian, Wang Renren, Chen Hongwei (2019-06)
      Analysis and Design of 3D Printing Equipment for Removable Site Buildings
3141. Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
      Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes
3142. Wolfs Robert, Bos Freek, Salet Theo (2019-06)
      Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing
3143. Tay Yi, Qian Ye, Tan Ming (2019-05)
      Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test
3144. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
      A Study into the Effect of Different Nozzles Shapes and Fiber-Reinforcement in 3D Printed Mortar
3145. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
      An Investigation into the Effects of Deposition-Orientation of Material on the Mechanical Behavior of the Cementitious Powder and Gypsum-Powder in Inkjet 3D Printing
3146. Grassi Giulia, Lupica Spagnolo Sonia, Paoletti Ingrid (2019-05)
      Fabrication and Durability Testing of a 3D Printed Façade for Desert Climates
3147. Hack Norman, Lindemann Hendrik, Kloft Harald (2019-05)
      Adaptive Modular Spatial Structures for Shotcrete 3D Printing
3148. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
      A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
      Materials and Construction Technology
3149. Valle‐Pello P., Álvarez‐Rabanal Felipe, Alonso‐Martínez M., Coz Díaz J. (2019-05)
      Numerical Study of the Interfaces of 3D Printed Concrete Using Discrete Element Method
3150. Olsson Nils, Shafqat Ali, Arica Emrah, Økland Andreas (2019-05)
      3D Printing Technology in Construction:
      Results from a Survey
3151. Liu Gaojie, Bai Erlei, Xu Jinyu, Wang Tengjiao et al. (2019-05)
      Research Status and Development Prospect of 3D Printing Concrete Materials
3152. Jie G., Jie B., Hongxue J. (2019-05)
      Experimental Study on Layer Bonding Property of 3D Printing Building Materials
3153. Krause Martin, Otto Jens (2019-05)
      Digital Process Model for Concrete 3D Printing
3154. Perrot Arnaud, Amziane Sofiane (2019-04)
      3D Printing in Concrete:
      General Considerations and Technologies
3155. Perrot Arnaud, Rangeard Damien (2019-04)
      3D Printing in Concrete:
      Techniques for Extrusion-Casting
3156. Perrot Arnaud, Rangeard Damien (2019-04)
      3D Printing with Concrete:
      Impact and Designs of Structures
3157. Pierre Alexandre, Perrot Arnaud (2019-04)
      3D Printing by Selective Binding in a Particle-Bed:
      Principles and Challenges
3158. Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2019-04)
      Mechanical Behavior of 3D Printed Cement Materials
3159. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
      Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
      A Fundamental Study of Extrudability and Early-Age Strength Development
3160. Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
      The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
3161. Mazhoud Brahim, Perrot Arnaud, Picandet Vincent, Rangeard Damien et al. (2019-04)
      Underwater 3D Printing of Cement-Based Mortar
3162. Lafhaj Zoubeir, Dakhli Zakaria (2019-04)
      Performance Indicators of Printed Construction Materials:
      A Durability-Based Approach
3163. Xu Jie, Ding Lieyun, Cai Lixiong, Zhang Lichao et al. (2019-04)
      Volume-Forming 3D Concrete Printing Using a Variable-Size Square Nozzle
3164. Diggs-McGee Brandy, Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
      Print Time vs. Elapsed Time:
      A Temporal Analysis of a Continuous Printing Operation for Additive Constructed Concrete
3165. Geneidy Omar, Ismaeel Walaa, Abbas Ayman (2019-04)
      A Critical Review for Applying Three-Dimensional Concrete Wall Printing Technology in Egypt
3166. Lee Dongyoun, Kim Hakmin, Sim Joonhyeok, Lee Dongmin et al. (2019-04)
      Trends in 3D Printing Technology for Construction Automation Using Text Mining
3167. Tay Yi, Li Mingyang, Tan Ming (2019-04)
      Effect of Printing Parameters in 3D Concrete Printing:
      Printing Region and Support Structures
3168. Furet Benoît, Poullain Philippe, Garnier Sébastien (2019-04)
      3D Printing for Construction Based on a Complex Wall of Polymer-Foam and Concrete
3169. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
      Development of Cement-Based Mortars for 3D Printing Through Wet Extrusion
3170. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
      The Effect of Loading-Direction on the Compressive Behavior of a 3D Printed Cement-Based Material
3171. Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
      Utilization of Recycled Glass for 3D Concrete Printing:
      Rheological and Mechanical Properties
3172. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
      Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
3173. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
      A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
      An Experimental and Computational Investigation
3174. Zuo Zibo, Gong Jian, Huang Yulin, Zhan Yijian et al. (2019-03)
      Experimental Research on Transition from Scale 3D Printing to Full-Size Printing in Construction
3175. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
      Hardened Properties of 3D Printed Concrete:
      The Influence of Process Parameters on Inter-Layer Adhesion
3176. Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
      Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
3177. Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
      Thermal-Humidity Parameters of 3D Printed Wall
3178. Cao Xiangpeng, Li Zongjin (2019-02)
      Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products From Magnesium-Potassium-Phosphate Cement Material
3179. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2019-02)
      Mechanical Properties of Structures 3D Printed with Cementitious Powders
3180. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2019-02)
      Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing
3181. Avrutis Daniel, Nazari Ali, Sanjayan Jay (2019-02)
      Industrial Adoption of 3D Concrete Printing in the Australian Market
3182. Holt Camille, Edwards Laurie, Keyte Louise, Moghaddam Farzad et al. (2019-02)
      Construction 3D Printing
3183. Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
      Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste
3184. Nerella Venkatesh, Mechtcherine Viktor (2019-02)
      Studying the Printability of Fresh Concrete for Formwork-Free Concrete Onsite 3D Printing Technology (CONPrint3D)
3185. Sanjayan Jay, Nematollahi Behzad (2019-02)
      3D Concrete Printing for Construction Applications
3186. Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
      Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
3187. Malaeb Zeina, Sakka Fatima, Hamzeh Farook (2019-02)
      3D Concrete Printing:
      Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups
3188. Marchment Taylor, Sanjayan Jay, Nematollahi Behzad, Xia Ming (2019-02)
      Inter-Layer Strength of 3D Printed Concrete
3189. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2019-02)
      Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
3190. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
      Properties of Powder-Based 3D Printed Geopolymers
3191. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
      Development of Powder-Based 3D Concrete Printing Using Geopolymers
3192. Jeong Hoseong, Han Sun-Jin, Choi Seung-Ho, Lee Yoon et al. (2019-02)
      Rheological Property Criteria for Buildable 3D Printing Concrete
3193. Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
      Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing
3194. Ingaglio Joseph, Fox John, Naito Clay, Bocchini Paolo (2019-02)
      Material-Characteristics of Binder-Jet 3D Printed Hydrated CSA Cement with the Addition of Fine Aggregates
3195. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
      Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
3196. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-01)
      Direct-Shear-Test for the Assessment of Rheological Parameters of Concrete for 3D Printing Applications
3197. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
      Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
3198. Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
      Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing
3199. Nair Sooraj, Alghamdi Hussam, Arora Aashay, Mehdipour Iman et al. (2019-01)
      Linking Fresh Paste Microstructure, Rheology and Extrusion-Characteristics of Cementitious Binders for 3D Printing
3200. Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
      Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
3201. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-12)
      Robotic Concrete Surface Finishing:
      A Moldless Approach to Creating Thermally Tuned Surface Geometry for Architectural Building Components Using Profile 3D Printing
3202. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
      Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
3203. Chaar Ghassan, Stynoski Peter, Banko Marion (2018-11)
      Structural Behavior of Layer-Printed Reinforced Concrete Beams
3204. Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
      Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste
3205. Ding Zhu, Wang Xiaodong, Sanjayan Jay, Zou Patrick et al. (2018-11)
      A Feasibility Study on HPMC-Improved Sulphoaluminate Cement for 3D Printing
3206. Heever Marchant, Bester Frederick (2018-11)
      3D Printing of Concrete within the South African Building and Construction Industry
3207. Jipa Mihail-Andrei, Meibodi Mania, Giesecke Rena, Shammas Demetris et al. (2018-11)
      3D Printed Formwork for Prefabricated Concrete Slabs
3208. Prasittisopin Lapyote, Taweekarn Naphat, Chuaysiri Chanita, Snguanyat Chalermwut (2018-11)
      Printing and Fabrication Processes of Curvature Single-Layered Wall House Printed by 3D Extrusion-Printer
3209. Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
      Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
3210. Huang Tiancheng, Gu Hai, Zhang Jie, Li Bin et al. (2018-11)
      An Improved Multi-Relaxation Time Lattice Boltzmann Method for the Non-Newtonian Influence of the Yielding Fluid Flow in Cement-3D Printing
3211. Bos Freek, Bosco Emanuela, Salet Theo (2018-11)
      Ductility of 3D Printed Concrete Reinforced with Short Straight Steel-Fibers
3212. Mechtcherine Viktor, Nerella Venkatesh (2018-10)
      3D-Concrete-Printing by Selective Deposition:
      Requirements for Fresh Concrete and Testing
3213. Im Hyeonji, Othman Sulaiman, Castillo Jose (2018-10)
      Responsive Spatial Print:
      Clay 3D Printing of Spatial Lattices Using Real-Time Model-Recalibration
3214. Zivkovic Sasa, Battaglia Christopher (2018-10)
      Rough-Pass-Extrusion-Tooling:
      CNC Post-Processing of 3D Printed Sub-Additive Concrete Lattice-Structures
3215. Reinold Janis, Meschke Günther (2018-10)
      Particle-Finite-Element-Simulation of Fresh Concrete for 3D Printing Applications
3216. Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
      Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing
3217. Papachristoforou Michail, Mitsopoulos Vasilios, Stefanidou Maria (2018-10)
      Evaluation of Workability Parameters in 3D Printing Concrete
3218. Teizer Jochen, Blickle Alexander, King Tobias, Leitzbach Olaf et al. (2018-10)
      BIM for 3D Printing in Construction
3219. Ma Guowei, Li Zhijian, Wang Li, Bai Gang (2018-10)
      Micro-Cable-Reinforced Geopolymer Composite for Extrusion-Based 3D Printing
3220. Duarte José, Nazarian Shadi, Ashrafi Negar (2018-09)
      Designing Shelters for 3D Printing:
      A Studio Experiment
3221. Tan Kang (2018-09)
      The Framework of Combining Artificial Intelligence and Construction 3D Printing in Civil Engineering
3222. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
      Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
3223. Battaglia Christopher, Miller Martin, Zivkovic Sasa (2018-09)
      Sub-Additive 3D Printing of Optimized Double Curved Concrete Lattice Structures
3224. Bhooshan Shajay, Ladinig Johannes, Mele Tom, Block Philippe (2018-09)
      Function Representation for Robotic 3D Printed Concrete
3225. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-09)
      Thermally Informed Robotic Topologies:
      Profile 3D Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High-Resolution Surface Geometry
3226. Chen Mingxu, Li Laibo, Zheng Yan, Zhao Piqi et al. (2018-09)
      Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials
3227. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2018-09)
      A Framework for Performance-Based Testing of Fresh Mixtures for Construction-Scale 3D Printing
3228. Khalil Noura, Rémond Sébastien, Baz Bilal, Aouad Georges (2018-09)
      Characterization of 3D Printing Mortars Made with OPC-CSA Mixes
3229. Falliano Devid, Gugliandolo Ernesto, Domenico Dario, Ricciardi Giuseppe (2018-09)
      Experimental Investigation on the Mechanical Strength and Thermal Conductivity of Extrudable Foamed Concrete and Preliminary Views on Its Potential Application in 3D Printed Multilayer Insulating Panels
3230. Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
      Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
3231. Panda Biranchi, Mohamed Nisar, Tay Yi, Tan Ming (2018-09)
      Bond Strength in 3D Printed Geopolymer Mortar
3232. Marchment Taylor, Sanjayan Jay (2018-09)
      Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing
3233. Ma Siwei, Kawashima Shiho (2018-09)
      Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing
3234. Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
      Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
3235. Schröfl Christof, Nerella Venkatesh, Mechtcherine Viktor (2018-09)
      Capillary Water Intake by 3D Printed Concrete Visualised and Quantified by Neutron Radiography
3236. Yang Pu, Nair Sooraj, Neithalath Narayanan (2018-09)
      Discrete Element Simulations of Rheological Response of Cementitious Binders as Applied to 3D Printing
3237. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
      Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
3238. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
      The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials
3239. Chen Yu, Veer Frederic, Çopuroğlu Oğuzhan, Schlangen Erik (2018-09)
      Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing
3240. Vantyghem Gieljan, Boel Veerle, Corte Wouter, Steeman Marijke (2018-09)
      Compliance, Stress-Based and Multi-Physics Topology-Optimization for 3D Printed Concrete Structures
3241. Yu Jing, Leung Christopher (2018-09)
      Impact of 3D Printing-Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC)
3242. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
      Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
3243. Subrin Kévin, Bressac Thomas, Garnier Sébastien, Ambiehl Alexandre et al. (2018-09)
      Improvement of the Mobile Robot Location Dedicated for Habitable House Construction by 3D Printing
3244. Ghaffar Seyed, Mullett Paul (2018-09)
      Commentary:
      3D Printing Set to Transform the Construction Industry
3245. Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
      Large-Scale 3D Printing by a Team of Mobile Robots
3246. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
      Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
3247. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
      Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
3248. Liu Jingkuang, Li Guokai (2018-08)
      Research on the Development of 3D Printing Construction Industry Based on Diamond-Model
3249. Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
      Vision of 3D Printing with Concrete:
      Technical, Economic and Environmental Potentials
3250. Hu Chang’an, Du Wenbo (2018-08)
      Research on the Method for Improving Mechanical Properties of Sand-Mold-Based on 3D Printing Process
3251. Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
      Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing
3252. Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
      Particle-Bed 3D Printing in Concrete Construction:
      Possibilities and Challenges
3253. Borg Costanzi Christopher, Ahmed Zeeshan, Schipper Roel, Bos Freek et al. (2018-07)
      3D Printing Concrete on Temporary Surfaces:
      The Design and Fabrication of a Concrete Shell Structure
3254. Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
      Time-Gap-Effect on Bond Strength of 3D Printed Concrete
3255. Silva Wilson, Andersen Thomas, Kudsk Anders, Jørgensen Kåre (2018-07)
      3D Concrete Printing of Post-Tensioned Elements
3256. Al-Qutaifi Sarah, Nazari Ali, Bagheri Ali (2018-07)
      Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D Printing
3257. Xu Jie, Ding Lieyun (2018-07)
      Volume-Forming 3D Concrete Printing Using a Variable-Diameter Square Nozzle
3258. Poullain Philippe, Paquet Elodie, Garnier Sébastien, Furet Benoît (2018-06)
      On-Site Deployment of 3D Printing for the Building Construction:
      The Case of YhnovaTM
3259. Yang Hongxiong, Chung Jacky, Chen Yuhong, Li Yijia (2018-06)
      The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things
3260. Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
      3D Printing Using Concrete-Extrusion:
      A Roadmap for Research
3261. Wolfs Robert, Bos Freek, Salet Theo (2018-06)
      Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete
3262. Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
      Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer
3263. Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
      Design of a 3D Printed Concrete Bridge by Testing
3264. Panda Biranchi, Tay Yi, Paul Suvash, Tan Ming (2018-05)
      Current Challenges and Future Potential of 3D Concrete Printing
3265. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
      3D Printed Steel-Reinforcement for Digital Concrete Construction:
      Manufacture, Mechanical Properties and Bond Behavior
3266. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
      Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
3267. Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
      The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
3268. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
      3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
3269. Tay Yi, Ting Guan, Panda Biranchi, He Lewei et al. (2018-05)
      Bond Strength of 3D Printed Concrete
3270. Lu Bing, Li Mingyang, Qian Shunzhi, Leong Kah et al. (2018-05)
      Develop Cementitious Materials Incoporating Fly-Ash-Cenophere for Spray-Based 3D Printing
3271. Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
      Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
      An Experimental Investigation
3272. Salet Theo, Ahmed Zeeshan, Bos Freek (2018-05)
      3D Printed Concrete Bridge
3273. Ting Andrew, Tay Yi, Annapareddy Ashokreddy, Li Mingyang et al. (2018-05)
      Effect of Recycled-Glass Gradation in 3D Cementitious Material-Printing
3274. Liu Zhixin, Li Mingyang, Wong Teck, Tan Ming (2018-05)
      Measurement of the Fresh Rheological Properties of Material in 3D Printing
3275. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
      Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
3276. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
      Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates
3277. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
      Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
3278. Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
      A Review of 3D Concrete Printing Systems and Materials Properties:
      Current Status and Future Research Prospects
3279. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum (2018-05)
      Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing-Material
3280. Mechtcherine Viktor, Nerella Venkatesh (2018-04)
      Incorporating Reinforcement in 3D-Printing with Concrete
3281. Hojati Maryam, Nazarian Shadi, Duarte José, Radlińska Aleksandra et al. (2018-04)
      3D Printing of Concrete:
      A Continuous Exploration of Mix-Design and Printing-Process
3282. Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
      Fresh Properties of a Novel 3D Printing Concrete Ink
3283. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
      Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
3284. Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
      3D Printing of Earth-Based Materials:
      Processing Aspects
3285. Jassmi Hamad, Najjar Fady, Mourad Abdel-Hamid (2018-04)
      Large-Scale 3D Printing:
      The Way Forward
3286. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
      Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete
3287. Chua Chee, Yeong Wai, An Jia (2018-04)
      Special Issue:
      NextGen Materials for 3D Printing
3288. Tian Wei, Han Nv (2018-04)
      Pore Characteristics (>0.1mm) Of Non-Air-Entrained Concrete Destroyed by Freeze-Thaw-Cycles Based on CT Scanning and 3D Printing
3289. Yin Hongxi, Qu Ming, Zhang Haiyan, Lim YeChan (2018-04)
      3D Printing and Buildings:
      A Technology Review and Future Outlook
3290. Ketel Sabrina, Falzone Gabriel, Wang Bu, Washburn Newell et al. (2018-04)
      A Printability Index for Linking Slurry Rheology to the Geometrical Attributes of 3D Printed Components
3291. Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
      3D Printing of Reinforced Concrete Elements:
      Technology and Design Approach
3292. Soltan Daniel, Li Victor (2018-03)
      A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing
3293. Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
      Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology
3294. Tobi A., Omar S., Yehia Z., Al-Ojaili S. et al. (2018-03)
      Cost Viability of 3D Printed House in UK
3295. Rippmann Matthias, Liew A., Mele Tom, Block Philippe (2018-03)
      Design, Fabrication and Testing of Discrete 3D Sand-Printed Floor Prototypes
3296. Panda Biranchi, Tan Ming (2018-03)
      Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
3297. Lafhaj Zoubeir, Rabenantoandro Andry, Krimi Imane, Dakhli Zakaria et al. (2018-03)
      3D Printing in Construction:
      Application-Framework for a Robotic-Arm Based on the Extrusion-Technique
3298. Sarakinioti Maria, Turrin Michela, Konstantinou Thaleia, Tenpierik Martin et al. (2018-03)
      Developing an Integrated 3D Printed Façade with Complex Geometries for Active Temperature-Control
3299. Yuan Yong, Tao Yaxin (2018-03)
      Mixing and Extrusion of Printing Concrete
3300. Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
      Additive Manufacturing (3D Printing):
      A Review of Materials, Methods, Applications and Challenges
3301. Mechtcherine Viktor, Nerella Venkatesh (2018-02)
      3D Printing with Concrete:
      State-of-the-Art, Trends, Challenges
3302. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
      Early-Age Mechanical Behaviour of 3D Printed Concrete:
      Numerical Modelling and Experimental Testing
3303. Nam Young, Hwang Young, Park Ji, Lim Yun (2018-02)
      Feasibility Study to Control Fiber-Distribution for Enhancement of Composite Properties via Three-Dimensional Printing
3304. Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
      Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells
3305. Lin Jia, Wu Xiong, Yang Wen, Zhao Ri et al. (2018-02)
      The Influence of Fine Aggregates on the 3D Printing Performance
3306. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2018-01)
      Penetration of Cement-Pastes into Sand-Packings During 3D Printing:
      Analytical and Experimental Study
3307. Suiker Akke (2018-01)
      Mechanical Performance of Wall Structures in 3D Printing Processes:
      Theory, Design Tools and Experiments
3308. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
      Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
3309. Chen Yu, Çopuroğlu Oğuzhan, Veer Frederic (2018-01)
      A Critical Review of 3D Concrete Printing as a Low-CO2 Concrete Approach
3310. Schipper Roel, Borg Costanzi Christopher, Bos Freek, Ahmed Zeeshan et al. (2017-12)
      Double Curved Concrete Printing:
      Printing on Non-Planar Surfaces
3311. Coenders Jeroen, Mathot Maarten, Martens Pascal, Bos Freek et al. (2017-12)
      Optimizing 3D Concrete Printing:
      Exploring Potentials and Limitations of Materials and Production
3312. Ma Guowei, Li Zhijian, Wang Li (2017-12)
      Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing
3313. Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
      Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete
3314. Jipa Mihail-Andrei, Bernhard Mathias, Dillenburger Benjamin (2017-11)
      Submillimetre Formwork:
      3D Printed Plastic Formwork for Concrete Elements
3315. Rael Ronald, Fratello Virginia (2017-11)
      Clay Bodies:
      Crafting the Future with 3D Printing
3316. Sakin Mehmet, Kiroglu Yusuf (2017-10)
      3D Printing of Buildings:
      Construction of the Sustainable Houses of the Future by BIM
3317. Richardson Victoria (2017-10)
      3D Printing Becomes Concrete:
      Exploring the Structural Potential of Concrete 3D Printing
3318. Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
      Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars
3319. Marijnissen Marjolein, Zee Aant (2017-09)
      3D Concrete Printing in Architecture:
      A Research on the Potential Benefits of 3D Concrete Printing in Architecture
3320. Bhooshan Shajay, Mele Tom, Block Philippe (2017-09)
      Equilibrium-Aware Shape Design for Concrete Printing
3321. Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
      Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar
3322. Ma Guowei, Wang Li (2017-08)
      A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Large-Scale 3D Printing
3323. Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-08)
      Classification of Building Systems for Concrete 3D Printing
3324. Zareiyan Babak, Khoshnevis Behrokh (2017-08)
      Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
3325. Lao Wenxin, Li Mingyang, Masia Lorenzo, Tan Ming (2017-08)
      Approaching Rectangular Extrudate in 3D Printing for Building and Construction by Experimental Iteration of Nozzle Design
3326. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
      Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
3327. Zuo Zibo, Gong Jian, Huang Yulin (2017-07)
      Performance of 3D Printing in Construction by Using Computer-Control-Technology
3328. Sakka Fatima, Hamzeh Farook (2017-07)
      3D Concrete Printing in the Service of Lean Construction
3329. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2017-07)
      Current Progress of 3D Concrete Printing Technologies
3330. Marchment Taylor, Xia Ming, Dodd Elise, Sanjayan Jay et al. (2017-07)
      Effect of Delay-Time on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
3331. Shakor Pshtiwan, Renneberg Jarred, Nejadi Shami, Paul Gavin (2017-07)
      Optimization of Different Concrete Mix Designs for 3D Printing by Utilizing 6DOF Industrial Robot
3332. Panda Biranchi, Lim Jian, Mohamed Nisar, Paul Suvash et al. (2017-07)
      Automation of Robotic Concrete Printing Using Feedback-Control-System
3333. Kashani Alireza, Ngo Tuan (2017-07)
      Optimization of Mixture-Properties for 3D Printing of Geopolymer Concrete
3334. Kontovourkis Odysseas, Tryfonos George (2017-07)
      Integrating Parametric Design with Robotic Additive Manufacturing for 3D Clay Printing:
      An Experimental Study
3335. Bos Freek, Ahmed Zeeshan, Wolfs Robert, Salet Theo (2017-06)
      3D Printing Concrete with Reinforcement
3336. Martens Pascal, Mathot Maarten, Bos Freek, Coenders Jeroen (2017-06)
      Optimizing 3D Printed Concrete Structures Using Topology Optimization
3337. Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
      A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
3338. Wolfswinkel Jan, Land Wim, Stuit Herke, Bastiaens Guido et al. (2017-06)
      Design Process of a 3D Printed Concrete Water Taxi Stop
3339. Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
      3D Concrete Printing:
      A Structural Engineering Perspective
3340. Kazemian Ali, Yuan Xiao, Meier Ryan, Cochran Evan et al. (2017-06)
      Construction-Scale 3D Printing:
      Shape Stability of Fresh Printing Concrete
3341. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
      3D Printing Trends in Building and Construction Industry:
      A Review
3342. Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
      Cementitious Materials for Construction-Scale 3D Printing:
      Laboratory Testing of Fresh Printing Mixture
3343. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
      Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
3344. Hambach Manuel, Volkmer Dirk (2017-02)
      Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste
3345. Xu Jie, Ding Lieyun, Love Peter (2017-01)
      Digital Reproduction of Historical Building Ornamental Components:
      From 3D Scanning to 3D Printing
3346. Ahmed Zeeshan, Bos Freek, Wolfs Robert, Salet Theo (2016-11)
      Design Considerations Due to Scale Effects in 3D Concrete Printing
3347. Jipa Mihail-Andrei, Bernhard Mathias, Meibodi Mania, Dillenburger Benjamin (2016-11)
      3D Printed Stay-in-Place Formwork for Topologically Optimized Concrete Slabs
3348. Kothman Ivo, Faber Niels (2016-09)
      How 3D Printing Technology Changes the Rules of the Game:
      Insights from the Construction Sector
3349. Hager Izabela, Golonka Anna, Putanowicz Roman (2016-08)
      3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
3350. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
      Additive Manufacturing of Concrete in Construction:
      Potentials and Challenges of 3D Concrete Printing
3351. Gardiner James, Janssen Steven, Kirchner Nathan (2016-07)
      A Realization of a Construction-Scale Robotic System for 3D Printing of Complex Formwork
3352. Teizer Jochen, Blickle Alexander, King Tobias, Leitzbach Olaf et al. (2016-07)
      Large-Scale 3D Printing of Complex Geometric Shapes in Construction
3353. Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
      Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components
3354. Nam Young, Park Ji, Yoon Seung, Lim Yun (2016-06)
      3D Printing of Fibers and Reinforcements for Cementitious Composites to Maximize the Fracture-Resisting Performance of FRCCs
3355. Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
      A Critical Review of the Use of 3D Printing in the Construction Industry
3356. Fischer Thomas, Herr Christiane (2016-04)
      Parametric Customisation of a 3D Concrete Printed Pavilion
3357. Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
      Large-Scale 3D Printing of Ultra-High-Performance Concrete:
      A New Processing Route for Architects and Builders
3358. Farina Ilenia, Fabbrocino F., Carpentieri G., Modano M. et al. (2015-12)
      On the Reinforcement of Cement Mortars through 3D Printed Polymeric- and Metallic-Fibers
3359. Wolfs Robert, Salet Theo, Hendricks Berry (2015-08)
      3D Printing of Sustainable Concrete Structures
3360. Krause Martin, Otto Jens, Bulgakov Alexey, Sayfeddine Daher (2015-07)
      Strategic Optimization of 3D Concrete Printing Using the Method of CONPrint3D®
3361. Beigh Mirza, Nerella Venkatesh, Schröfl Christof, Mechtcherine Viktor (2015-06)
      Studying the Rheological Behavior of Limestone-Calcined-Clay-Cement (LC3) Mixtures in the Context of Extrusion-Based 3D Printing
3362. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
      Mechanical Properties of Structures 3D Printed with Cementitious Powders
3363. Barnett Eric, Gosselin Clément (2015-06)
      Large-Scale 3D Printing with a Cable-Suspended Robot
3364. Yossef Mostafa, Chen An (2015-06)
      Applicability and Limitations of 3D Printing for Civil Structures
3365. Perkins Isaac, Skitmore Martin (2015-03)
      Three-Dimensional Printing in the Construction Industry:
      A Review
3366. Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
      Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
3367. Christ Susanne, Schnabel Martin, Vorndran Elke, Groll Jürgen et al. (2014-10)
      Fiber-Reinforcement During 3D Printing
3368. Gardiner James, Janssen Steven (2014-05)
      FreeFab:
      Development of a Construction-Scale Robotic Formwork 3D Printer
3369. Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
      Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology
3370. Gibbons Gregory, Williams Reuben, Purnell Phil, Farahi Elham (2013-07)
      3D Printing of Cement Composites
3371. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
      Mix-Design and Fresh Properties for High-Performance Printing Concrete
3372. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
      Hardened Properties of High-Performance Printing Concrete
3373. Rael Ronald, Fratello Virginia (2011-10)
      Developing Concrete Polymer Building Components for 3D Printing
3374. Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
      Development of a Viable Concrete Printing Process