Weng Yiwei¶

1. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
   Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
2. Xu Fengming, Yu Jie, Teng Fei, Lin Xiaoshan et al. (2025-12)
   Application of Recycled Tile as Internal Curing Material in 3D-Printed Engineered Cementitious Composites
3. Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
   Multi-Material 3D Concrete Printing:
   Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
4. Liu Tong, Du Song, Teng Fei, Weng Yiwei (2025-08)
   Energy Consumption Modeling for a Robot Arm in 3D Concrete Printing
5. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
   3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
   Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
6. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
   Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
7. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
   Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
8. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
   Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
9. Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
   Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites
10. Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
    3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
    Mechanical and Acoustic Insulation Properties
11. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
    Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
12. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
    Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
13. Teng Fei, Zhang Dong, Li Heng, Weng Yiwei (2024-07)
    Feasibility Study on Reinforcement Placement with a BIM-Enabled Collaborative Robot System
14. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
15. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
    Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
16. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
    A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
17. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
18. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
19. Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
    BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
20. Wang Qiang-Chen, Yu Si-Nan, Chen Zi-Xiao, Weng Yiwei et al. (2023-11)
    Promoting Additive Construction in Fast-Developing Areas:
    A Q-Methodology-Analysis of Stakeholder-Perspectives on Policy-Mixes
21. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
    Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
    Experimental and Numerical Studies
22. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
23. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
    Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
24. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
    Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
25. Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
    Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design
26. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
    Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
27. Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
    Additive Manufacturing in the Construction Industry:
    The Comparative Competitiveness of 3D Concrete Printing
28. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
    Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
29. Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
    Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
    A Case Study
30. Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
    Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
31. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
    Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
32. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
    Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
33. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
34. Lu Bing, Zhu Weiping, Weng Yiwei, Liu Zhixin et al. (2020-02)
    Study of MgO-Activated-Slag as a Cementless Material for Sustainable Spray-Based 3D Printing
35. Lim Jian, Weng Yiwei, Pham Quang-Cuong (2019-10)
    3D Printing of Curved Concrete Surfaces Using Adaptable Membrane Formwork
36. Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
    Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing
37. Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
    Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent
38. Lu Bing, Weng Yiwei, Li Mingyang, Qian Ye et al. (2019-02)
    A Systematical Review of 3D Printable Cementitious Materials
39. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2019-02)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
40. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
    Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures
41. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
    Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
42. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
    Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
43. Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
    Large-Scale 3D Printing by a Team of Mobile Robots
44. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
45. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
46. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
    Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
47. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
    3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
48. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model