Skip to content

Zhang Dong

Information

ORCID
N/A
First Contribution
2018-12-11
Last Contribution
2025-02-19
Number Contributions
12
Number Citations
283

Top Co-Authors

  1. Weng Yiwei (12)
  2. Teng Fei (8)
  3. Li Mingyang (7)
  4. Li Heng (4)
  5. Yu Jie (4)

Top Cited Articles

  1. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
    Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process (127)

Persons This Author Cites the Most

  1. Tan Ming (49)
  2. Weng Yiwei (48)
  3. Li Mingyang (45)
  4. Qian Shunzhi (40)
  5. Bos Freek (29)

Persons This Author Is Cited Most By

  1. Weng Yiwei (25)
  2. Yu Jie (20)
  3. Ye Junhong (19)
  4. Tan Ming (18)
  5. Mechtcherine Viktor (17)

  1. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
    Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
  2. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
    Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
  3. Teng Fei, Zhang Dong, Li Heng, Weng Yiwei (2024-07)
    Feasibility Study on Reinforcement Placement with a BIM-Enabled Collaborative Robot System
  4. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
    Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
  5. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
  6. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
  7. Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
    BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
  8. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
  9. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
    Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
  10. Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
    Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design
  11. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
    Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
  12. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
    Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures