2025-02¶

1. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-02)
   Effect of Air-Entraining Agent on Hardened Properties of 3D Printed Concrete with Emphasis on Permeability and Air Void Structure
2. Li Qiyan, Wen Xiaodong, Gao Xiaojian (2025-02)
   Rheological and Mechanical Properties of 3D-Printable Magnesium-Oxysulfate-Cements
3. Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
   Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
4. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
   Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
   An Experimental Approach
5. Duan Zhenhua, Tao Jie-Lin, Lin Can, Jiao Dengwu et al. (2025-02)
   3D Printing-Driven Dynamic Migration of Lightweight Microspheres in the Printable Mortars:
   Experiment and Modelling
6. Gardan Julien, Hedjazi Lofti, Attajer Ali (2025-02)
   Additive Manufacturing in Construction:
   State of the Art and Emerging Trends in Civil Engineering
7. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
   Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
8. Bakhshi Amir, Zafar Muhammad, Hojati Maryam (2025-02)
   A Study on Achieving High Tensile Ductility in 3D-Printable Engineered Cementitious Composites Reinforced with 8mm Fibers
9. Ramirez Rodriguez Fatima, Pancho Paolo, Sanchez Daniela, Poudel Suman et al. (2025-02)
   Design and Development of a Lean Robotic Cell for Concrete 3D Printing
10. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-02)
    Permeability and Electrical Resistivity of 3D-Printed Mortars Using Local Materials (Zeolite, Calcined Clay, and Mussel Shell Powder):
    Aotearoa, New Zealand
11. Salaimanimagudam M., Jayaprakash Jaganathan, Anwar Mohammed (2025-02)
    Selection of Reinforcement Incorporation Method for 3D Printed Concrete Using MCDM
12. Vasilić Ksenija (2025-02)
    Standardization Aspects of Concrete 3D Printing
13. Banijamali Kasra, Dempsey Mary, Chen Jianhua, Kazemian Ali (2025-02)
    Machine Learning Approach to Predict the Early-Age Flexural Strength of Sensor-Embedded 3D-Printed Structures
14. Liu Chao, Liu Huawei, Wu Yiwen, Wu Jian et al. (2025-02)
    Effect of X-Ray CT Characterized Pore Structure on the Freeze-Thaw Resistance of 3D Printed Concrete with Recycled Coarse Aggregate
15. Chadha Kunaljit, Vasey Lauren, Gramazio Fabio, Kohler Matthias (2025-02)
    Adaptive Robotic Tamping:
    A Novel Robotic Method for Formative Surface Finishing in Earth-Based Additive Manufacturing
16. Kolawole John, Buswell Richard, Mahmood Sultan, Isa Muhammed et al. (2025-02)
    On the Origins of Anisotropy of Extrusion-Based 3D Printed Concrete:
    The Roles of Filament Skin and Agglomeration
17. Mortada Youssef, Hammoud Ahmad, Masoud Laith, Wyrzykowski Mateusz et al. (2025-02)
    3D Printable Ca(OH)2-Based Geopolymer Concrete with Steel Fiber Reinforcement
18. Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
    Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
    Emphasis on Rheological and Microstructural Properties
19. Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
    Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
20. Bayat Hamid, Kashani Alireza (2025-02)
    Reducing Material and Energy Consumption in Single-Story Buildings Through 3D-Printed Wall Designs
21. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
    Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
22. Shen Qiang, Sun Dongpu, Lu Chenyu, Zhang Zhigang et al. (2025-02)
    Fresh and Anisotropic-Mechanical Properties of Polyoxymethylene Fibers Reinforced 3D Printable Cementitious Composites
23. Mengistu Girum, Nemes Rita (2025-02)
    Evaluating the Performance of Recycled Aggregate Concrete Incorporating 3D-Printed Concrete Waste as Aggregate Using the Rebound Hammer Test
24. Das Arnesh, Wenger Cedric, Walpen Lukas, Flatt Robert (2025-02)
    Early-Age Hydration of Accelerated Low-Carbon Cements for Digital Fabrication
25. Liu Xiongfei, Li Chuang, Guo Pei, Wang Li et al. (2025-02)
    Spray-Based 3D Printed Tunnel Slag Concrete:
    Evaluation for Printability and Mechanical Performance
26. Cui Weijiu, Liu Wenliang, Guo Ruyi, Da Wan et al. (2025-02)
    Geometrical Quality Inspection in 3D Concrete Printing Using AI-Assisted Computer Vision
27. Palazzo Andrea (2025-02)
    How 3D Printers for Houses Can Reduce CO2 Emissions
28. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-02)
    Strategies for Minimizing Environmental Impact in Construction:
    A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase
29. Olivo Nik, Piccioni Valeria, Milano Francesco, Gramazio Fabio et al. (2025-02)
    Thermal Enhancement of Hollow-Core 3DP Through Nozzle Design Customization
30. Sangiorgio Valentino, Rossetti Pietro, Polidoro Anthony, Rossi Emilio (2025-02)
    Sustainable Raw-Earth Blocks Achieved with 3D-Printed Formworks:
    Parametric Modeling, Prototyping, and Laboratory Testing
31. Tarek Shaimaa, Mansour Yasser, Abdelmohsen Sherif, Kohail Mohamed et al. (2025-02)
    Evaluating the Role of Additive Manufacturing in Adobe Brick Enhancement:
    A Comparative Study
32. Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part I: Geometry
33. Zavaleta Diana, Quispe Axcel, Rojas Omar, Silva Guido et al. (2025-02)
    3D-Printing of a Basic Housing Unit Prototype Using Earthen-Based Matrices Stabilized with Rice Husk Fibers
34. Liu Qiang, Jiang Quan, Zhao Herui, Yu Yang et al. (2025-02)
    Porous Diatomite Promotes Lightweight and Low-Carbon Concrete 3D Printing:
    An Exploratory Study
35. Akkoyun Furkan, Günal Ayse (2025-02)
    The State of 3D Concrete Printing:
    Current Applications and Future Opportunities
36. Park Ji-seul, Jeong Seung-Su, Hong Seungkee, Lee Seohyung et al. (2025-02)
    Mechanical Modeling for Prediction of Structural Stability of Cylindrical Structures During 3D Concrete Printing
37. Sangiorgio Valentino, Bianchi Iacopo, Forcellese Archimede (2025-02)
    Advancing Decarbonization Through 3D Printed Concrete Formworks:
    LIFE Cycle Analysis of Technologies, Materials, and Processes
38. Zeng Jun-Jie, Sun Hou-Qi, Deng Run-Bin, Yan Zitong et al. (2025-02)
    Bond Performance Between FRP-Bars and 3D-Printed High-Performance Concrete
39. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
    Establishing Benchmark Properties for 3D-Printed Concrete:
    A Study of Printability, Strength, and Durability
40. Zhao Hongyu, Wang Xiangyu, Chen Zhaohui, Liu Xianda et al. (2025-02)
    Microcrack Investigations of 3D Printing Concrete Using Multiple Transformer Networks
41. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
    Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
42. Engel Sven, Hegger Josef, Claßen Martin (2025-02)
    Multimodal Automated Fabrication with Concrete:
    Case-Study and Structural Performance of Ribbed CFRP-Reinforced Concrete Ceiling
43. Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
    Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates
44. Sando Mona, Stephan Dietmar (2025-02)
    The Role of Mixing Sequence in Shaping the 3D-Printability of Geopolymers
45. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
    Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
46. Degen Robin, Dichtl Matthias (2025-02)
    Praxiseinblick in den 3D-Druck im Betonbau:
    Additives Bauen und CO2-Bilanzierung im Fokus
47. Manny Agemar, Dehn Frank (2025-02)
    Basics of 3D Printing in Concrete Construction:
    Recommendations for Practice
48. Senthilnathan Shanmugaraj, Raphael Benny (2025-02)
    Predicting Buildability Using the Surface Texture of 3D Printed Concrete Elements
49. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
    A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
50. Rudziewicz Magdalena, Maroszek Marcin, Hutyra Adam, Góra Michał et al. (2025-02)
    Influence of Foaming Agents and Stabilizers on Porosity in 3D Printed Foamed Concrete
51. Fediuk Roman, Amran Mugahed, Pavlík Zbyšek (2025-02)
    Editorial:
    Special Issues for “Emerging Materials for 3D Printing in Construction”
52. Zhi Yefan, Chai Hua, Teng Teng, Akbarzadeh Masoud (2025-02)
    Automated Toolpath Design of 3D Concrete Printing Structural Components