Stephan Dietmar¶

1. Sando Mona, Alves Santos Sara, Worms Paul, Gurlo Aleksander et al. (2025-12)
   Evaluation of Continuous Epoxy-Impregnated Carbon Fiber Reinforcement in a 3D-Printable Geopolymer Composite
2. Sando Mona, Stephan Dietmar (2025-07)
   Online Monitoring for 3D Printable Geopolymers:
   Automated Slug Test Analysis with Image Analysis Revealing Mixing Sequence Effects
3. Sando Mona, Stephan Dietmar (2025-02)
   The Role of Mixing Sequence in Shaping the 3D-Printability of Geopolymers
4. Ji Yianliang, Pott Ursula, Mezhov Alexander, Rößler Christiane et al. (2024-11)
   Modelling and Experimental Study on Static Yield-Stress-Evolution and Structural Build-Up of Cement-Paste in Early-Stage of Cement Hydration
5. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
   Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
   Sorption and Microstructural Perspective
6. Lehr Leonard, Pfeiffer Sven, Rasanani Mahdieh, Stephan Dietmar et al. (2024-09)
   3D Light on Site:
   Bringing Concrete Print to the Construction Site
7. Rasehorn Inken, Ehm Clemens, Frohmüller Max, Schaudienst Falk et al. (2024-09)
   Development and Holistic Suitability-Assessment of 3D Printable Mortar
8. Sando Mona, Stephan Dietmar (2024-06)
   The Development of a Fly-Ash-Based Geopolymer for Extrusion-Based 3D Printing, Along with a Printability Prediction Method
9. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
   Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
10. Pott Ursula, Jakob Cordula, Dorn Tobias, Stephan Dietmar (2023-07)
    Investigation of a Shotcrete-Accelerator for Targeted Control of Material-Properties for 3D Concrete Printing Injection-Method
11. Pott Ursula, Jakob Cordula, Wolf Julian, Stephan Dietmar (2023-06)
    Comparison of Physical and Physico-Chemical Methods for 3D Printing Application with the Focus on the Unconfined Uniaxial Compression-Test
12. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
    Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
    Experimental and Numerical Studies
13. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
14. Pott Ursula, Wolf Christoph, Petryna Yuri, Stephan Dietmar (2022-09)
    Evaluation of the Unconfined Uniaxial Compression-Test to Study the Evolution of Apparent Printable Mortar-Properties During the Early-Age Transition-Regime
15. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
    Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
    Cast versus Printed Specimens
16. Aziz Saqib, Kim Ji-Su, Stephan Dietmar, Gengnagel Christoph (2022-06)
    Generative Structural Design:
    A Cross-Platform Design and Optimization Workflow for Additive Manufacturing
17. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
18. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
19. Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
    Digital Concrete Construction by Means of Additive Processes:
    State of the Art and Research Needs
20. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
21. Pott Ursula, Stephan Dietmar (2021-04)
    Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
22. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review
23. Sikora Paweł, Chung Sang-Yeop, Liard Maxime, Lootens Didier et al. (2021-02)
    The Effects of Nano-Silica on the Fresh and Hardened Properties of 3D Printable Mortars
24. Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
    Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials
25. Hirsch Tamino, Dorn Tobias, Ehm Clemens, Stephan Dietmar (2020-07)
    Comparison of Printable Inorganic Binders:
    Key Properties for 3D Printable Materials
26. Pfeiffer Sven, Dorn Tobias, Hirsch Tamino, Ehm Clemens et al. (2020-07)
    Architectural Applications and Workflows for Additive Fabrication with Concrete
27. Pott Ursula, Jakob Cordula, Jansen Daniel, Neubauer Jürgen et al. (2020-02)
    Investigation of the Incompatibilities of Cement and Superplasticizers and Their Influence on the Rheological Behavior
28. Dorn Tobias, Hirsch Tamino, Stephan Dietmar (2019-09)
    Study on the Influence of Accelerators on the Hydration of Portland Cement and Their Applicability in 3D Printing