Skip to content

2020-07

  1. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
    Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
  2. Valente Marco, Sambucci Matteo, Sibai Abbas, Musacchi Ettore (2020-07)
    Multi-Physics Analysis for Rubber-Cement Applications in Building and Architectural Fields:
    A Preliminary Analysis
  3. Makul Natt (2020-07)
    Advanced Smart Concrete:
    A Review of Current Progress, Benefits and Challenges
  4. Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
    Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder
  5. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
    Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
    An Experimental and Numerical Study
  6. Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
    Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
    A Review
  7. Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
    3D Concrete Printing:
    Free-Form Geometries with Improved Ductility and Strength
  8. Andersen Sebastian, Silva Wilson, Paegle Ieva, Nielsen Jens (2020-07)
    Numerical Model Describing the Early-Age Behavior of 3D Printed Concrete:
    Work in Progress
  9. Anton Ana-Maria, Jipa Mihail-Andrei, Reiter Lex, Dillenburger Benjamin (2020-07)
    Fast Complexity:
    Additive Manufacturing for Prefabricated Concrete Slabs
  10. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
    Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
  11. Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
    Print-Cast Concrete:
    Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
  12. Beersaerts Glenn, Lucas Sandra, Pontikes Yiannis (2020-07)
    An Fe-Rich Slag-Based Mortar for 3D Printing
  13. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2020-07)
    Printed Concrete as Formwork-Material:
    A Preliminary Study
  14. Bekkering Juliette, Kuit Barbara, Biffi Alessia, Ahmed Zeeshan (2020-07)
    Architectonic Explorations of the Possibilities of 3D Concrete Printing:
    The Historic Building Fragment as Inspiration for New Applications with 3D Concrete Printing in Architecture
  15. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2020-07)
    3D Printing of a Cement-Based Mortar in a Complex Fluid Suspension:
    Analytical Modeling and Experimental Tests
  16. Bester Frederick, Heever Marchant, Kruger Jacques, Cho Seung et al. (2020-07)
    Steel-Fiber Links in 3D Printed Concrete
  17. Bhattacherjee Shantanu, Santhanam Manu (2020-07)
    Enhancing Buildability of 3D Printable Concrete by Spraying of Accelerating-Admixture on Surface
  18. Blaakmeer Jan, Lobo B. (2020-07)
    A Robust Mortar and Printing System
  19. Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
    Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers
  20. Bos Freek, Dezaire Steven, Ahmed Zeeshan, Hoekstra Anne et al. (2020-07)
    Bond of Reinforcement-Cable in 3D Printed Concrete
  21. Brun Francis, Gaspar Florindo, Mateus Artur, Vitorino João et al. (2020-07)
    Experimental Study on 3D Printing of Concrete with Overhangs
  22. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
    Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
    Ultra-Thin, 3D Printed Formwork
  23. Buswell Richard, Kinnell Peter, Xu Jie, Hack Norman et al. (2020-07)
    Inspection Methods for 3D Concrete Printing
  24. Carneau Paul, Mesnil Romain, Ducoulombier Nicolas, Roussel Nicolas et al. (2020-07)
    Characterisation of the Layer-Pressing-Strategy for Concrete 3D Printing
  25. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-07)
    Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects
  26. Cascone Paolo, Laddaga Maddalena, Forestiero Federico (2020-07)
    Digital Construction:
    3D Printing for Performative Houses
  27. Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
    Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials
  28. Cho Seung, Kruger Jacques, Bester Frederick, Heever Marchant et al. (2020-07)
    A Compendious Rheo-Mechanical Test for Printability-Assessment of 3D Printable Concrete
  29. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
    Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
    Experiments and Modelling
  30. Costa Eduardo, Shepherd Paul, Orr John, Ibell Tim et al. (2020-07)
    Automating Concrete Construction:
    Digital Design of Non-Prismatic Reinforced Concrete Beams
  31. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
    Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete
  32. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
    Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
  33. Douba AlaEddin, Chan Clare, Berrios Stephanie, Kawashima Shiho (2020-07)
    Synthesis of Hybridized Rheological Modifiers for 3D Concrete Printing
  34. Duballet Romain, Mesnil Romain, Ducoulombier Nicolas, Carneau Paul et al. (2020-07)
    Free Deposition-Printing for Space-Truss-Structures
  35. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
  36. Esposito Laura, Menna Costantino, Asprone Domenico, Rossino Chiara et al. (2020-07)
    An Experimental Testing Procedure to Assess the Buildability Performance of 3D Printed Concrete Elements
  37. Falliano Devid, Crupi Giuseppe, Domenico Dario, Ricciardi Giuseppe et al. (2020-07)
    Investigation on the Rheological Behavior of Lightweight Foamed Concrete for 3D Printing Applications
  38. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
    Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
  39. Fioretti Marta, Kompella Sriram, Monte Francesco, Esposito Laura et al. (2020-07)
    Experimental Investigation on the Early-Age Tensile Strength of Fiber-Reinforced Mortar Used in 3D Concrete Printing
  40. Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2020-07)
    Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process
  41. Gardner Guy, Forward Kristen, Tse Kim, Sharma Karan (2020-07)
    Rapid Composite Formwork:
    An Automated and Customizable Process for Freeform Concrete Through Computational Design and Robotic Fabrication
  42. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
  43. Geneidy Omar, Kumarji Sujay, Dubor Alexandre, Sollazzo Aldo (2020-07)
    Simultaneous Reinforcement of Concrete While 3D Printing
  44. Grasser Georg, Pammer Lorenz, Köll Harald, Werner E. et al. (2020-07)
    Complex Architecture in Printed Concrete:
    The Case of the Innsbruck University 350th Anniversary Pavilion COHESION
  45. Grünewald Steffen, Schipper Roel (2020-07)
    Transition from Fluid to Solid Concrete in the Flexible Mould Process
  46. Hack Norman, Kloft Harald (2020-07)
    Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
    A Real-Scale Demonstrator
  47. Hameed Rashid, Papon Aurélie, Perrot Arnaud, Rangeard Damien (2020-07)
    Effect of Metallic Fibers on the Print Quality and Strength of 3D Printed Concrete
  48. Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2020-07)
    Physico-Chemical Characterization at Early-Age of 3D Printed Mortar
  49. Hass Lauri, Bos Freek (2020-07)
    Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete
  50. Hassan Hilal, Najjar Fady, Jassmi Hamad, Ahmed Waleed (2020-07)
    Fresh and Hardened Properties of 3D Printed Concrete Made with Dune Sand
  51. Heever Marchant, Bester Frederick, Pourbehi Mohammad, Kruger Jacques et al. (2020-07)
    Characterizing the Fissility of 3D Concrete Printed Elements via the Cohesive Zone Method
  52. Henke Klaudius, Talke Daniel, Matthäus Carla (2020-07)
    Additive Manufacturing by Extrusion of Lightweight Concrete:
    Strand Geometry, Nozzle Design and Layer Layout
  53. Hirsch Tamino, Dorn Tobias, Ehm Clemens, Stephan Dietmar (2020-07)
    Comparison of Printable Inorganic Binders:
    Key Properties for 3D Printable Materials
  54. Hondt Mélody, Rémond Sébastien, Leblond Philippe, Iea Bunthan et al. (2020-07)
    Fire Behavior of a Printed Sample for Building
  55. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
    Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
  56. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2020-07)
    Characterizing Extrudability for 3D Concrete Printing Using Discrete Element Simulations
  57. Jiramarootapong Patiphat, Prasittisopin Lapyote, Snguanyat Chalermwut, Tanapornraweekit Ganchai et al. (2020-07)
    Load Carrying Capacity and Failure Mode of 3D Printing Mortar Wall Panel Under Axial Compression Loading
  58. Kinomura Koji, Murata Satoshi, Yamamoto Yujin, Obi Hirotoshi et al. (2020-07)
    Application of 3D Printed Segments Designed by Topology-Optimization-Analysis to a Practical-Scale Pre-Stressed Pedestrian Bridge
  59. Kreiger Eric, Diggs-McGee Brandy, Wood Tanner, MacAllister Bruce et al. (2020-07)
    Field Considerations for Deploying Additive Construction
  60. Kruger Jacques, Cicione Antonio, Bester Frederick, Heever Marchant et al. (2020-07)
    Facilitating Ductile Failure of 3D Printed Concrete Elements in Fire
  61. Kurt Sibel, Atalay Yiğit, Aydın Ozan, Avcıoğlu Berrak et al. (2020-07)
    Design of Energy-Efficient White Portland Cement Mortars for Digital Fabrication
  62. Kuzmenko Kateryna, Féraille Adélaïde, Baverel Olivier, Roussel Nicolas (2020-07)
    Environmental Impacts of 6-Axis Robotic Arm for 3D Concrete Printing
  63. Lee Minu, Mata-Falcón Jaime, Popescu Mariana, Block Philippe et al. (2020-07)
    Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork
  64. Liu Yan, Jewett Jackson, Carstensen Josephine (2020-07)
    Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
  65. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-07)
    Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters
  66. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
    Sustainable Reinforced Concrete Beams:
    Mechanical Optimization and 3D Printed Formwork
  67. Marchment Taylor, Sanjayan Jay (2020-07)
    Penetration Reinforcing Method for 3D Concrete Printing
  68. Markin Slava, Ivanova Irina, Fataei Shirin, Reißig Silvia et al. (2020-07)
    Investigation on Structural Build-Up of 3D Printable Foam-Concrete
  69. Matthäus Carla, Back Daniel, Weger Daniel, Kränkel Thomas et al. (2020-07)
    Effect of Cement-Type and Limestone-Powder-Content on Extrudability of Lightweight Concrete
  70. McGee Wesley, Ng Tsz, Yu Kequan, Li Victor (2020-07)
    Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC-SHCC)
  71. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
    Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
  72. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-07)
    Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D Printing Cementitious Mixtures
  73. Mohammad Malek, Masad Eyad, Seers Thomas, Ghamdi Sami (2020-07)
    High-Performance Lightweight Concrete for 3D Printing
  74. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-07)
    Evaluating the Influence of Aggregate Content on Pumpability of 3D Printable Concrete
  75. Muishout Chantal, Coggins Tom, Schipper Roel (2020-07)
    More Than Meets the Eye?:
    Robotisation and Normativity in the Dutch Construction Industry
  76. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-07)
    Buildability of Geopolymer Concrete for 3D Printing with Microwave-Heating
  77. Naboni Roberto, Breseghello Luca (2020-07)
    High-Resolution Additive Formwork for Building-Scale Concrete Panels
  78. Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
    Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
  79. Napolitano Rosanna, Menna Costantino, Forni Daniele, Asprone Domenico et al. (2020-07)
    Dynamic Behavior of Layered 3D Printed Concrete Elements
  80. Natanzi Atteyeh, McNally Ciaran (2020-07)
    Characterising Concrete Mixes for 3D Printing
  81. Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
    Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
    Effects of Curing Condition and Print-Time Interval
  82. Odaglia Pietro, Voney Vera, Dillenburger Benjamin, Habert Guillaume (2020-07)
    Advances in Binder-Jet 3D Printing of Non-Cementitious Materials
  83. Park Jinsoo, Lee Hojae, Choi Hanshin (2020-07)
    Buildability of Mortar-Feedstock in Material-Extrusion Additive Manufacturing
  84. Pastore Tommaso, Menna Costantino, Asprone Domenico (2020-07)
    Combining Multiple Loads in a Topology-Optimization Framework for Digitally Fabricated Concrete Structures
  85. Pattaje Sooryanarayana Karthik, Stynoski Peter, Lange David (2020-07)
    Effect of Vibration on the Rheology of Concrete for 3D Printing
  86. Pekuss Raitis, Soto Borja (2020-07)
    Preliminary Productivity-Analysis of Conventional, Pre-Cast and 3D Printing Production-Techniques for Concrete Columns with Simple Geometry
  87. Pfeiffer Sven, Dorn Tobias, Hirsch Tamino, Ehm Clemens et al. (2020-07)
    Architectural Applications and Workflows for Additive Fabrication with Concrete
  88. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-07)
    2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste-Intrusion
  89. Prasittisopin Lapyote, Pongpaisanseree Kittisak, Jiramarootapong Patiphat, Snguanyat Chalermwut (2020-07)
    Thermal- and Sound-Insulation of Large-Scale 3D Extrusion-Printing Wall-Panel
  90. Putten Jolien, Olmen Alex, Aerts Marijke, Ascione Emiel et al. (2020-07)
    3D Concrete Printing On-Site:
    A Novel Way of Building Houses?
  91. Putten Jolien, Volder Melissa, Heede Philip, Schutter Geert et al. (2020-07)
    3D Printing of Concrete:
    The Influence on Chloride Penetration
  92. Ramani Ayyagari, Soto Borja (2020-07)
    Preliminary Study of the Implications of 3D Printing on the Construction Supply Chain
  93. Sambucci Matteo, Valente Marco, Sibai Abbas, Marini Danilo et al. (2020-07)
    Rubber-Cement Composites for Additive Manufacturing:
    Physical, Mechanical and Thermo-Acoustic Characterization
  94. Scheurer Martin, Dittel Gözdem, Gries Thomas (2020-07)
    Potential for the Integration of Continuous-Fiber-Based Reinforcements in Digital Concrete Production
  95. Sergis Vasileios, Charrier Malo, Ouellet-Plamondon Claudiane (2020-07)
    Prediction of the Yield-Stress of Printing Mortar-Ink
  96. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
    Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar
  97. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
    Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
  98. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2020-07)
    Effect of Polypropylene-Fibers on the Mechanical Properties of Extrudable Cementitious Material
  99. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
    ACDC:
    The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
  100. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2020-07)
    Effect of Limestone-Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
  101. Vantyghem Gieljan, Steeman Marijke, Corte Wouter, Boel Veerle (2020-07)
    Design-Optimization for 3D Concrete Printing:
    Improving Structural and Thermal Performances
  102. Varela Hugo, Barluenga Gonzalo, Palomar Irene (2020-07)
    Rheology Evaluation of Cement-Paste with Nano-Clay , Nano-Silica and Polymeric Admixtures for Digital Fabrication
  103. Verian Kho, Ashcroft Jarron, Carli Matthew, Bright Randall et al. (2020-07)
    Improving the Bonding Adhesion of the Cold Joints of Normal and Lightweight 3D Printing Mortars
  104. Voney Vera, Odaglia Pietro, Brumaud Coralie, Dillenburger Benjamin et al. (2020-07)
    Geopolymer Formulation for Binder-Jet 3D Printing
  105. Vukorep Ilija, Zimmermann Gregor, Sablotny Tino (2020-07)
    Robot-Controlled Fabrication of Sprayed Concrete Elements as a Cyber-Physical-System
  106. Wang Weiqiang, Konstantinidis Nikolaos, Austin Simon, Buswell Richard et al. (2020-07)
    Flexural Behavior of AR-Glass-Textile-Reinforced 3D Printed Concrete Beams
  107. Wang Yu, Li Shuaishuai, Qin Tian, Yu Ying et al. (2020-07)
    Concrete 3D Printing:
    System Development, Process Planning and Experimental Results
  108. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
    Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
    A First Feasibility Study
  109. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
    Lightweight Concrete 3D Printing by Selective Cement-Activation:
    Investigation of Thermal Conductivity, Strength and Water-Distribution
  110. Westerlind Helena, Vargas José (2020-07)
    Knitting Concrete
  111. Wu Yun-Chen, Cotrell Jason, Li Mo (2020-07)
    Inter-Layer Effect on Fracture Behavior of 3D Printing Concrete
  112. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
    Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing
  113. Xu Yading, Schlangen Erik, Šavija Branko (2020-07)
    Auxetic Behavior of Cementitious Cellular Composites under Uniaxial Compression and Cyclic Loading
  114. Yu Shiwei, Sanjayan Jay, Du Hongjian (2020-07)
    Impact of Particle-Size and Grading on Aggregate-Bed 3D Concrete Printing
  115. Zongo Karim, Charrier Malo, Duval Corentin, Ouellet-Plamondon Claudiane (2020-07)
    Dynamic and Static Yield-Stress Determination of Cementitious Paste with Admixtures
  116. Zuo Wenqiang, Dong Chenghao, Keita Emmanuel, Roussel Nicolas (2020-07)
    Penetration Study of Liquid in Powder-Bed for 3D Powder-Bed Printing
  117. Zuo Wenqiang, Keita Emmanuel, Bornert Michel, Roussel Nicolas (2020-07)
    Drying of 3D Printed Mortar Filaments at Early-Age Assessed by X-Ray Computed Tomography
  118. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-07)
    Strategies for the Reinforcement for 3D-Concrete-Printing
  119. Wan Qian, Wang Li, Ma Guowei (2020-07)
    Adaptable Tool-Path-Planning Method for 3D Concrete Printing Based on the Mapping Method
  120. Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
    Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing
  121. Codarin Sara (2020-07)
    Additive Manufacturing Technologies in Restoration