Kränkel Thomas¶

1. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
   Adaptive-Binder-Aggregate Mixing (ABAM):
   Concept for Extrusion-Based Multi-Material 3D Concrete Printing
2. Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
   Additive Manufacturing by the Selective Paste-Intrusion:
   Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
3. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2024-09)
   Investigations into the Dynamics of Penetration Tests in Digital Fabrication
4. Krakovská Ema, Briels David, Straßer Alexander, Kränkel Thomas et al. (2024-09)
   Functionally Hybridised Lightweight Concrete Components:
   Monolithic Building Construction Using Selective Paste-Intrusion
5. Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
   Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology.
6. Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
   Sustainability Potential of Additive Manufactured Concrete Structures:
   Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall
7. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2023-12)
   Near‐Nozzle Mixing for Additive Manufacturing of Cementitious Mortar:
   A Homogeneity Study
8. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
   Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
   Effect of Temperature on the Mechanical Performance
9. Straßer Alexander, Riegger Felix, Hamilton Leigh, Kränkel Thomas et al. (2023-09)
   Selective Paste-Intrusion:
   Integration of Reinforcement by WAAM
10. Straßer Alexander, Matthäus Carla, Weger Daniel, Kränkel Thomas et al. (2022-06)
    Selective Paste-Intrusion:
    Stability of Cement-Paste Mixtures Towards Changing Ambient Temperature
11. Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
    Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
12. Weger Daniel, Pierre Alexandre, Perrot Arnaud, Kränkel Thomas et al. (2021-01)
    Penetration of Cement-Pastes into Particle-Beds:
    A Comparison of Penetration Models
13. Matthäus Carla, Kofler Nadine, Kränkel Thomas, Weger Daniel et al. (2020-10)
    Inter-Layer Reinforcement Combined with Fiber-Reinforcement for Extruded Lightweight Mortar Elements
14. Matthäus Carla, Back Daniel, Weger Daniel, Kränkel Thomas et al. (2020-07)
    Effect of Cement-Type and Limestone-Powder-Content on Extrudability of Lightweight Concrete
15. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
    Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
    A First Feasibility Study
16. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
    Lightweight Concrete 3D Printing by Selective Cement-Activation:
    Investigation of Thermal Conductivity, Strength and Water-Distribution
17. Matthäus Carla, Weger Daniel, Kränkel Thomas, Carvalho Luis et al. (2019-09)
    Extrusion of Lightweight Concrete:
    Rheological Investigations