2025-12¶

1. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
   Adaptive-Binder-Aggregate Mixing (ABAM):
   Concept for Extrusion-Based Multi-Material 3D Concrete Printing
2. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
   Evaluating Compressive Strength in 3D-Printed Concrete Structures:
   A Comparative Study of ANSYS Simulations and Experimental Data
3. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
   Next-Generation Green Construction:
   3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
4. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
   Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
5. Cong Long-Yu, Zhang Fang, Qian Yong-Jiu (2025-12)
   Flexural Behavior Investigation of RC Beams with FRP-Reinforced 3D-Printed ECC Permanent Formwork
6. Cui Xiaoshuang, Pu Xianghao, Zhang Dongyang, Li Weihong et al. (2025-12)
   Study on the Mechanical Properties of 3D-Printed Continuous Jute Yarn-Reinforced Concrete
7. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
   Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
8. Paul Suvash, Lee Junghyun, Tay Yi, Amr Issam et al. (2025-12)
   Developing Sustainable 3D Printable Concrete Materials Using Olivine Sand for Carbon Sequestration
9. Aabbas Mohamed, Mazian Brahim, Ahachad Mohammed, Zoghlami Aya et al. (2025-12)
   Sustainable 3D Printed Clay Bricks Incorporating Coffee Waste:
   Toward Circular Economy in Construction
10. Kim Seung, Kim Jae (2025-12)
    Vibration-Assisted Rheological Control for 3D Printing of Precast Concrete Modules
11. Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
    Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
12. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
    Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
13. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
    Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
14. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
15. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
    Polymer-Enhanced Composites for 3D Concrete Printing:
    A Review of Materials, Processes, and Performance
16. Deetman Arjen, Suiker Akke (2025-12)
    Characterization of Early-Age Elastic–Plastic Properties of 3D Printed Materials Using Indentation Testing
17. Muñoz-Sanguinetti Claudia, Vega-Coloma Mabel, Letelier Viviana, Marrero Madelyn et al. (2025-12)
    Environmental Footprint of 3D-Printed Concrete Using Recycled Materials
18. Rodriguez Fabian, Vugteveen Caiden, Fross Xavier, Wei Hui et al. (2025-12)
    3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments
19. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
20. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-12)
    3D Printing of Simulated Lunar Soil Geopolymer and Analysis of Its Weak Surface and Anisotropic Performance
21. Wang Xiangyu, Li Baidian, Wu Fei, Gu Kan et al. (2025-12)
    Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings
22. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
    Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
23. Cárdenas Valeria, Vargas Juan, Fantucci Stefano (2025-12)
    Topological Optimization and Material Exploration for Improving the Thermal Performance of 3D Printed Prefabricated Wall Components
24. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
    Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
25. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
26. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
    Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
27. Cimini Jacopo, Meroni Lorenzo, Chiantore Mariachiara, Albicini Paolo et al. (2025-12)
    Addressing Challenges in Marine Algal Restoration:
    Lessons Learned from 3D-Printed Structures on Artificial Reefs
28. Ferrari Lucia, Rizzieri Giacomo, Ferrara Liberato, Franzoni Elisa (2025-12)
    Rheological Control of Cementitious Composites Incorporating Ceramic Wastes for 3D Printing Applications
29. Huang Qunyi, Huang Qingyu, Yang Hong, Zhang Jiahang et al. (2025-12)
    Research on the Workability of 3D Printed Fiber-Reinforced Concrete Materials
30. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Inqiad Waleed et al. (2025-12)
    Exploring Knowledge Domains and Future Research Directions in 3D Printed Concrete:
    A Bibliometric and Systematic Review
31. Liu Mei, Wang Huai, Li Yang, Li Xiulin et al. (2025-12)
    Post-Fire Mechanical Properties of 3D Printed Concrete Under Different Cooling Methods
32. Yan Yufei, Zhang Mo, Ma Guowei (2025-12)
    Synergistic Effect of Multi-Supplementary Materials on Rheology and Ultra-Early Stage Properties of 3D Printable FA-GBFS Geopolymer
33. Akgümüş Fatih, Şahin Hatice, İsafça Kaya Tuğçe, Mardani Ali (2025-12)
    Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete
34. Hurtig Karel, Čítek David, Holý Milan, Koteš Peter et al. (2025-12)
    Experimental Assessment of Durability in 3D Printed Cementitious Materials
35. Shaik Khaja, Perumalla Mallikarjun, Boilla Charan (2025-12)
    Topology Optimization with Experimental-Numerical Investigation of 3D-Printed Concrete Elements
36. Kamhawi Abdallah, Lin Yuxin, Watson Christopher, Barton Kira et al. (2025-12)
    A Framework for Process Anomaly Detection in 3D Concrete Printing
37. Slavcheva Galina, Levchenko Artem, Artamonova Olga, Karakchi-Ogli Davut et al. (2025-12)
    Mechanical Behavior and Reinforcement Efficiency of 3D Printed Concrete Under Compression, Tension, and Bending
38. Xiao Wei (2025-12)
    Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
39. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-12)
    Effect of Aggregate-to-Binder Ratio on 3D Printed Concrete:
    Printability, Mechanics, and Shrinkage
40. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
41. Gierlinger David, Hansemann Georg, Schmid Robert, Trummer Andreas et al. (2025-12)
    Design and Construction with 3D Concrete Printing
42. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2025-12)
    3D Concrete-Printed Geocell for Reinforcing Unbound Granular Pavement Layers
43. Kovaleva Daria, Haufe Carl, Miller Olga, Gericke Oliver et al. (2025-12)
    Lightweight and Sustainable Construction with Concrete:
    The Role of Digital Design and Manufacturing Methods at ILEK
44. Okangba Stanley, Ngcobo Ntebo, Mahachi Jeffrey (2025-12)
    Bridging Innovation and Governance:
    A UTAUT-Based Mixed-Method Study of 3D Concrete Printing Technology Acceptance in South Africa
45. Skoury Lior, Asaf Ofer, Sprecher Aaron, Menges Achim et al. (2025-12)
    Data-Informed Digital Twin for Large-Scale 3D Printing in Construction
46. Subramaniam Kolluru, Maganty Sohanth, Kamakshi Tippabhotla, Ghandhi Dhruv et al. (2025-12)
    Design and Deployment of a Functionally Efficient 3D-Printed Concrete Bridge Developed by Form Optimization
47. Sun Yuhang, Yang Xiaojie, Liu Xiongfei, Ma Guowei et al. (2025-12)
    Coordinated Spray-Based 3D Printing of Reinforced Concrete Structure:
    A Multi-Angle Strategy for Blockage Mitigation
48. Baghdadi Abtin, Khanipour Raad Kian, Dörrie Robin, Kloft Harald (2025-12)
    Fabrication of Dry Connection Through Stamping and Milling of Green-State Concrete
49. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
    Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
50. Baharlou Ehsan, Datta Ipsita, Ozbulut Osman (2025-12)
    Feasibility of 3D Printing Oyster Shell Waste Laden Hydrogel Inks for Developing Mycelium Composite in Architectural Materials
51. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
    A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
52. Rangel Carolina, Salet Theo, Lucas Sandra (2025-12)
    A Design Methodology for Sustainable Lightweight 3D-Printable Concrete with SCMs
53. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
54. Deetman Arjen, Bos Derk, Lucas Sandra, Salet Theo et al. (2025-12)
    A Database Framework for 3D Concrete Printing
55. Dörrie Robin, Megnet Manuel, David Martin, Dröder Klaus et al. (2025-12)
    Integration of Discrete Reinforcement Elements for Shotcrete 3D Printing of Complex Structures
56. Gaudillière-Jami Nadja (2025-12)
    A Critical Materials Perspective on 3DCP
57. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Mustafa Ali et al. (2025-12)
    Passive Determination of Anisotropic Compressive Strength of 3D Printed Concrete Using Multiple Neural Networks Enhanced with Explainable Machine Learning (XML)
58. Jacobi Ando, Zöllner Jan-Phillip, Hack Norman, Mai (née Dressler) Inka (2025-12)
    Encasement of Pre-Placed Reinforcement in Injection 3D Concrete Printing:
    The Effect of Rheology and Process Parameters
59. Knychalla Bruno, Wiesner Christian, Sonnleitner Patrick, Kowalczyk Magdalena et al. (2025-12)
    Integrated Fiber Forms:
    Functionally Integrated Slab Systems Through Additive Manufacturing and Natural Fiber Reinforcement
60. Sando Mona, Alves Santos Sara, Worms Paul, Gurlo Aleksander et al. (2025-12)
    Evaluation of Continuous Epoxy-Impregnated Carbon Fiber Reinforcement in a 3D-Printable Geopolymer Composite
61. Babajaniniashirvani Vida, Afsari Kereshmeh, McCoy Andrew (2025-12)
    Investigating Key Competencies for 3D Concrete Printing in Affordable Housing
62. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
    Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
63. Hammoud Ahmad, Mohomad Yosef, Shomar Hasan, Masad Eyad et al. (2025-12)
    Data-Driven Framework for Printability and Geometric Quality Prediction in 3D Concrete Printing
64. Iqbal Imtiaz, Inqiad Waleed, Kasim Tala, Besklubova Svetlana et al. (2025-12)
    Strength Characterisation of Fly Ash Blended 3D Printed Concrete Enhanced with Explainable Machine Learning
65. Rojas Jorge, Hasanzadeh Sogand (2025-12)
    A Unified Workflow for Enhanced Efficiency in 3D Concrete Printing Using a 6 DoF Robotic Arm
66. Shilar Fatheali, Shilar Mubarakali (2025-12)
    Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
67. Tong Zhongling, Guan Qingtao, Elabbasy Ahmed, Ateah Ali et al. (2025-12)
    Empowering 3D Printed Concrete:
    Discovering the Impact of Steel Fiber Reinforcement on Mechanical Performance
68. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
    Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
    Insights from Acoustic Emission Characterization
69. Kloft Harald (2025-12)
    Digital Building Fabrication – The Path Towards the Unity of Material, Process and Form:
    A Personal Reflection from Research and Practice
70. Sunny Akash, Jayaprakash Jaganathan (2025-12)
    Unveiling the Printing Success of Concrete 3D Printed Models:
    A Simulation Study with Voxel Print and Abaqus Using Design of Experiments
71. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
72. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
    Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
73. Xu Fengming, Yu Jie, Teng Fei, Lin Xiaoshan et al. (2025-12)
    Application of Recycled Tile as Internal Curing Material in 3D-Printed Engineered Cementitious Composites
74. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
    Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
    Rheology and Mechanical Behavior
75. Han Seongho, Ahn Eunjong, Shin Myoungsu, Popovics John et al. (2025-12)
    Methodology for Surface Defect Assessment in 3D Concrete Printing Using Computer-Vision and Ultrasonic Testing Considering Structural Build-Up
76. Wang Hailong, Shi Yiqing, Sun Xiaoyan, Lin Xiqiang et al. (2025-12)
    Design, Multi-Scale Structural Analysis, and Construction of Modular Prefabricated 3D-Printed Concrete Residence
77. Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
    Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
78. Liu Xinhao, Hu Jiajun, Xiong Guiyan, Cundy Andrew et al. (2025-12)
    Long-Term Durability and Degradation Mechanisms of 3D Printed Geopolymers (3DPG) With/Without Healing Agents in Marine Environments
79. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
    Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
80. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
    Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
81. Öztürk Ece, Ince Ceren, Borgianni Yuri, Nicolaides Demetris et al. (2025-12)
    Printability, Engineering Properties and Environmental Implications of 3D-Printed Cementitious Mortars Incorporating Hydrated Lime, Tile Powder and Accelerator
82. Alnaggar Mohammed (2025-12)
    Large Format Additive Manufacturing with Cementitious and Geo Materials:
    General Considerations, Drivers, and Context
83. Cai Xianhuan, Chen Fan, Zhao Zhihui, Xiao Peng et al. (2025-12)
    Impact of Early Particle Characteristics on Rheology and Buildability in 3D-Printed Magnesium Silicon Potassium Phosphate Cement Incorporating Fly Ash
84. Guerrero Ana, Asensio Eloy, Fernández Fernando (2025-12)
    Large‐Format Additive Manufacturing with Cement and Clays:
    Characterization Methods
85. Teixeira João, Jesus Manuel, Ribeiro Elis, Rangel Bárbara et al. (2025-12)
    Large Format Additive Manufacturing with Cement and Clay Applications
86. Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
    Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
87. Sifan Mohamed, Upasiri Irindu, Poologanathan Keerthan, Popo-Ola Sunday et al. (2025-12)
    Fire Performance and Design of LSF Wall Panels with 3D Printed Concrete and Steel Lipped Channel Sections
88. Feng Hu, Yuan Xiang, Yu Zhenyu, Guo Aofei et al. (2025-12)
    Printability and Rheological Properties of 3D Printing Ultra-High Ductility Magnesium Phosphate Cement-Based Composites
89. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
    Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
90. Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
    Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements