Mendoza Reales Oscar¶

1. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2026-01)
   Effect of Cellulose Microfibers on Rheological Properties and Printability of 3D Printable Cement-Based Composites
2. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
   Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
   A Sustainable Alternative to Cement-Intensive Systems
3. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2025-06)
   Fresh and Hardened Properties of Cellulose Fiber-Reinforced Mortars for 3D Printing in Construction
4. Tinoco Matheus, Toledo Filho Romildo, Mendoza Reales Oscar (2025-06)
   Rice Husk Bio-Aggregates for 3D Printing in Construction:
   Balancing Fresh and Hardened Properties
5. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2025-04)
   Rheological and Environmental Implications of Recycled Concrete Powder as Filler in Concrete 3D Printing
6. Tinoco Matheus, Cavalcante Tiago, Andrade Luiza, Araújo Olga et al. (2025-01)
   Mix-Design-Strategies for 3D Printable Bio-Based Cementitious Composites Using Rice-Husk-Particles as Multifunctional Aggregates
7. Andrade Rodrigo, Mendoza Reales Oscar, Carvalho Gonzaga e Silva Ana, Fairbairn Eduardo et al. (2024-12)
   Thermal Behavior of Air-Fluid in Triangular Cavities of 3D Printed Concrete Walls
8. Varela Hugo, Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-10)
   3D Printable Cement-Based Composites Reinforced with Sisal-Fibers:
   Rheology, Printability and Hardened Properties
9. Canavarro Cavalcante Tiago, Castrillon Fernandez Letitia, Toledo Filho Romildo, Mendoza Reales Oscar (2024-09)
   3D Printable Mortars with Different Recycled Concrete Powders as Fillers
10. Valera Hugo, Pimentel Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-09)
    Rheological and 3D Printing-Assessment of Sisal-Fiber Mortar for Architectural Applications
11. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2024-05)
    Influence of Recycled Concrete-Powder on Rheology of Printable Cement-Based Matrixes
12. Fairbairn Eduardo, Santos Larissa, Mendoza Reales Oscar, Farias Marina et al. (2023-06)
    New Conceptions and Constructive Methods for Pumped Storage Hydropower-Plants
13. Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo (2023-06)
    Rheological Behavior of 3D Printable Bio-Concretes Produced with Rice Husk
14. Fernandez Letízia, Caldas Lucas, Mendoza Reales Oscar (2023-05)
    Environmental Evaluation of 3D Printed Concrete Walls Considering the Life Cycle Perspective in the Context of Social Housing
15. Tinoco Matheus, Gouvêa Lucas, Cássia Magalhães Martins Karenn, Toledo Filho Romildo et al. (2022-12)
    The Use of Rice Husk Particles to Adjust the Rheological Properties of 3D Printable Cementitious Composites Through Water Sorption
16. Fairbairn Eduardo, Santos Larissa, Farias Marina, Mendoza Reales Oscar (2022-07)
    Numerical Modeling of New Conceptions of 3D Printed Concrete Structures for Pumped Storage Hydropower
17. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
18. Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
    Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures
19. Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
    Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes