Panda Biranchi¶

1. Warsi Syed, Panda Biranchi, Biswas Pankaj (2026-04)
   3D Finite Element Analysis on the Effects of Boundary Elements Confinement on Cyclic Performance of 3D Printed Concrete Wall
2. Maurya Shubham, Panda Biranchi, Dixit Uday (2026-03)
   Experimental Study on Void Reduction and Bonding Behavior in 3D Concrete Printing with a Trowel-Integrated Nozzle
3. Kumar S., Kumar L., Muthu Nelson, Panda Biranchi (2026-03)
   Toward Efficient Simulation of Cracked 3D-Printed Concrete Beams:
   Analytical and Homogenized Finite Element Approach
4. Warsi Syed, Panda Biranchi, Biswas Pankaj, Chandra Borsaikia Arun (2026-03)
   Design of Earthquake-Resistant 3D Printed Concrete Walls:
   An Integrated Experimental-Numerical Framework for Predicting Cyclic Performance of Full-Scale Structural Building Based on Wall Testing
5. Dey Dhrutiman, Panda Biranchi, Kole Jagabandhu (2026-02)
   Investigation into the Effect of Full Replacement with Portland Slag Cement and Screened Slag Sand for Development of Sustainable 3D Printed Concrete
6. Sahu Akshay, Panda Biranchi (2026-01)
   Growth Curve-Based Continuous Toolpath Design for Improving the Performance of Additively Manufactured Concrete
7. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
   Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
8. Sahu Akshay, Panda Biranchi (2025-11)
   An Additive Manufacturing-Oriented Design Approach for Digital Construction
9. Gulia Preeti, Dogra Sourabh, Gupta Arpan, Boddepalli Uday et al. (2025-09)
   Building a Metamaterial Slab with Gosper Curve
10. Maurya Shubham, Kumar Vijay, Panda Biranchi, Borsaikia Arun et al. (2025-09)
    Inline Polymer Cable Reinforcement in 3D Concrete Printing with a Special Nozzle
11. Sahu Akshay, Sharma Deepak, Panda Biranchi (2025-09)
    Tailoring Topology-Optimized Lightweight Concrete Beam Design for Additive Manufacturing
12. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
    Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
    Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
13. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
    Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
    Insights from Damage Mechanics and Cohesive Zone Approaches
14. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
    Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
    Analytical Investigation and Numerical Modelling
15. Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
    A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
16. Kumar Soni Ashish, Anil Sangwai Keyur, Panda Biranchi (2025-01)
    In-Process Monitoring and Quality-Assessment of 3D Concrete Printing Process
17. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-01)
    Influence of Mixture-Composition and Carbonation-Curing on Properties of Sustainable 3D Printable Mortars
18. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
    Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
19. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
    Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
    Experiment and Finite Element Study
20. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
21. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate
22. Srinivas Dodda, Boddepalli Uday, Dey Dhrutiman, Choaudhary Bhavesh et al. (2024-09)
    Development of Outdoor Furniture Using 3D Concrete Printing
23. He Lewei, Pan Jiahui, Hee Yu, Chen Hao et al. (2024-09)
    Development of Novel Concave and Convex Trowels for Higher Inter-Layer Strength of 3D Printed Cement-Paste
24. Dey Dhrutiman, Panda Biranchi (2024-09)
    Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
25. Mohemmi Morteza, Sadeghian Vahid, Panda Biranchi, Boyle Sheryl (2024-09)
    Numerical Modeling of Lateral Resistance of 3D Printed Concrete Walls
26. Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2024-09)
    Comparative Study into the Inter-Layer Bond Strength of 3D Printed Mortar:
    Underwater vs. Air Environments
27. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
    Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
    A Numerical Study
28. Sahu Akshay, Panda Biranchi (2024-08)
    A TSP-Based Continuous Path-Planning for Additive Manufacturing of Concrete
29. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
    A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
30. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
    Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
31. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2024-05)
    Synergistic Effect of Fly-Ash and Polyvinyl-Alcohol-Fibers in Improving Stability, Rheology, and Mechanical Properties of 3D Printable Foam-Concrete
32. Laghi Vittoria, Shakor Pshtiwan, Panda Biranchi, Gasparini Giada (2024-04)
    Editorial:
    Additive Manufacturing in Construction
33. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
    Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
34. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
    Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
    A Review
35. Dey Dhrutiman, Nguyen Vuong, Nguyen-Xuan Hung, Srinivas Dodda et al. (2023-12)
    Flexural Performance of 3D Printed Concrete Structure with Lattice-Infills
36. Panda Biranchi, Shakor Pshtiwan, Lagaros Nikos (2023-12)
    Advanced Modelling for Additive Manufacturing in Construction
37. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Concrete Additive Manufacturing
38. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Powder-Bed Additive Manufacturing
39. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Shotcrete Additive Manufacturing
40. Warsi Syed, Srinivas Dodda, Panda Biranchi, Biswas Pankaj (2023-12)
    Investigating the Impact of Coarse Aggregate Dosage on the Mechanical Performance of 3D Printable Concrete
41. Kumar Lalit, Panda Biranchi, Muthu Nelson (2023-10)
    A Simple Potential Energy Formulation for 3D Concrete Printed Structures Considering the Shear Effects in the Build-Direction
42. Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
    3D Printing of Geopolymer Mortar:
    Overview of the Effect of Mix-Design and Printing Parameters on the Strength
43. Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
    Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
44. Maurya Shubham, Dey Dhrutiman, Panda Biranchi, Dixit Uday (2023-04)
    In-Line Reinforcement of Steel-Cable in 3D Concrete Printing
45. Panda Biranchi, Tran Jonathan (2023-03)
    Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials
46. Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
    A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
47. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2022-12)
    Stability of Three-Dimensional Printable Foam-Concrete as Function of Surfactant Characteristics
48. Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
    Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
    A Comparative Study with Silica-Fume and Limestone
49. Tay Yi, Ting Guan, Panda Biranchi, Wong Teck et al. (2022-11)
    Towards Net-Zero in 3DP for Building & Construction
50. Dey Dhrutiman, Panda Biranchi (2022-10)
    An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
51. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
    Rheology and Printability of Portland-Cement-Based Materials:
    A Review
52. Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
    3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone
53. Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
    3D Concrete Printing Modelling of Thin-Walled Structures
54. Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
    Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
    A Review on Recent Progresses
55. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review
56. Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
    Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
57. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
    Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
58. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
    Sustainable Materials for 3D Concrete Printing
59. Babafemi Adewumi, Kolawole John, Miah Md, Paul Suvash et al. (2021-06)
    A Concise Review on Inter-Layer Bond Strength in 3D Concrete Printing
60. Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
    Digital Design Computing and Modelling for 3D Concrete Printing
61. Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
    Biomimicry for 3D Concrete Printing:
    A Review and Perspective
62. Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
    Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications
63. Tay Yi, Panda Biranchi, Ting Guan, Ahamed N. et al. (2020-10)
    3D Printing for Sustainable Construction
64. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
    Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing
65. Panda Biranchi, Mohamed Nisar, Tan Ming (2019-09)
    Rheology and Structural Rebuilding of One-Part Geopolymer Mortar in the Context of 3D Concrete Printing
66. Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
    Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing
67. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
    The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
68. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2019-06)
    Processing of Cementitious Materials for 3D Concrete Printing
69. Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
    Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing
70. Panda Biranchi, Lim Jian, Tan Ming (2019-02)
    Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction
71. Panda Biranchi, Tan Ming (2018-11)
    Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
72. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay
73. Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
    Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing
74. Panda Biranchi, Mohamed Nisar, Tay Yi, Tan Ming (2018-09)
    Bond Strength in 3D Printed Geopolymer Mortar
75. Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
    Time-Gap-Effect on Bond Strength of 3D Printed Concrete
76. Panda Biranchi, Tay Yi, Paul Suvash, Tan Ming (2018-05)
    Current Challenges and Future Potential of 3D Concrete Printing
77. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
    Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
78. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
    Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates
79. Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
    Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
    An Experimental Investigation
80. Tay Yi, Ting Guan, Panda Biranchi, He Lewei et al. (2018-05)
    Bond Strength of 3D Printed Concrete
81. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
    Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
82. Panda Biranchi, Tan Ming (2018-03)
    Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
83. Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
    Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar
84. Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
    Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction
85. Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
    Additive Manufacturing of Geopolymer for Sustainable Built Environment
86. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
    Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
87. Panda Biranchi, Lim Jian, Mohamed Nisar, Paul Suvash et al. (2017-07)
    Automation of Robotic Concrete Printing Using Feedback-Control-System
88. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
    3D Printing Trends in Building and Construction Industry:
    A Review