Skip to content

Dey Dhrutiman

Information

ORCID
0000-0003-1447-4568
First Contribution
2019-06-29
Last Contribution
2025-03-16
Number Contributions
15
Number Citations
264

Top Co-Authors

  1. Panda Biranchi (15)
  2. Srinivas Dodda (6)
  3. Sitharam Thallak (5)
  4. Kumar Lalit (2)
  5. Muthu Nelson (2)

Top Cited Articles

  1. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review     (127)

Persons This Author Cites the Most

  1. Tan Ming (62)
  2. Panda Biranchi (58)
  3. Paul Suvash (27)
  4. Tay Yi (26)
  5. Sanjayan Jay (25)

Persons This Author Is Cited Most By

  1. Panda Biranchi (33)
  2. Boddepalli Uday (10)
  3. Gandhi Indu (10)
  4. Srinivas Dodda (9)
  5. Sitharam Thallak (7)

  1. Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
    A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
  2. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
    Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
  3. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
    Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
    Experiment and Finite Element Study
  4. Srinivas Dodda, Boddepalli Uday, Dey Dhrutiman, Choaudhary Bhavesh et al. (2024-09)
    Development of Outdoor Furniture Using 3D Concrete Printing
  5. Dey Dhrutiman, Panda Biranchi (2024-09)
    Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
  6. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
    Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
  7. Dey Dhrutiman, Nguyen Vuong, Nguyen-Xuan Hung, Srinivas Dodda et al. (2023-12)
    Flexural Performance of 3D Printed Concrete Structure with Lattice-Infills
  8. Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
    3D Printing of Geopolymer Mortar:
    Overview of the Effect of Mix-Design and Printing Parameters on the Strength
  9. Maurya Shubham, Dey Dhrutiman, Panda Biranchi, Dixit Uday (2023-04)
    In-Line Reinforcement of Steel-Cable in 3D Concrete Printing
  10. Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
    A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
  11. Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
    Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
    A Comparative Study with Silica-Fume and Limestone
  12. Dey Dhrutiman, Panda Biranchi (2022-10)
    An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
  13. Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
    3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone
  14. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review
  15. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2019-06)
    Processing of Cementitious Materials for 3D Concrete Printing