2023-04¶

Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
Additive Manufacturing Earth-Based Composite:
Strategical and Computational Methodology for Building-Shell-Geometries
Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
3D Printed Concrete Permanent Formwork:
Effect of Post-Cast Concrete Proportion on Interface Bonding
Dias Bruno, Rocha Douglas, Faria Paulina, Lucas Sandra et al. (2023-04)
Limes with Hydraulic Properties for 3D Printing Mortars
Joshi Arpan, Carvalho Tomás, Gaspar Florindo (2023-04)
Incorporation of Forest Biomass-Based Fly-Ash in Cement for 3D Printing
Simioni Fernanda, Rangel Bárbara, Campos Nadine, Teixeira João (2023-04)
3D Printing for Construction:
A Systematic Review of Its Sustainability
Tao Yaxin, Lesage Karel, Schutter Geert, Tittelboom Kim (2023-04)
Adhesion Studies in View of Automated Repair Using 3D Concrete Printing
Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm
Wan Qian, Yang Wenwei, Wang Li, Ma Guowei (2023-04)
Global Continuous Path-Planning for 3D Concrete Printing Multi-Branched Structure
Fan Dingqiang, Zhu Jinyun, Fan Mengxin, Lu Jianxian et al. (2023-04)
Intelligent Design and Manufacturing of Ultra-High-Performance Concrete:
A Review
Gupta Shashank, Esmaeeli Hadi, Prihar Arjun, Ghantous Rita et al. (2023-04)
Fracture- and Transport-Analysis of Heterogeneous 3D Printed Lamellar Cementitious Materials
Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
3D Printing of Geopolymer Mortar:
Overview of the Effect of Mix-Design and Printing Parameters on the Strength
Uddin Md, Ye Junhong, Deng Boyu, Li Lingzhi et al. (2023-04)
Interpretable Machine Learning for Predicting the Strength of 3D Printed Fiber-Reinforced Concrete
Gao Yanan, Hua Sudong, Yue Hongfei (2023-04)
Study on Preparation and Rheological Properties of 3D Printed Pre-Foaming Concrete
Nodehi Mehrab, Omer Liam, Asiabanpour Bahram, Ozbakkaloglu Togay (2023-04)
A Novel Lightweight Mechanism for 3D Printing of Cementitious Materials
Razzaghian Ghadikolaee Mehrdad, Cerro-Prada Elena, Pan Zhu, Korayem Asghar (2023-04)
Nanomaterials as Promising Additives for High-Performance 3D Printed Concrete:
A Critical Review
Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
Arslan Volkan, Dogan Zekeriya (2023-04)
Three-Dimensional, Printable Paving Stone:
A Preliminary Study
Wang Youyu, Ma Guowei, Wang Li, Zhang Wengang et al. (2023-04)
Size-Effects in Cavern-Model-Tests Based on 3D Printing
Yu Qian, Zhu Binrong, Li Xuesen, Meng Lingqi et al. (2023-04)
Investigation of the Rheological and Mechanical Properties of 3D Printed Eco-Friendly Concrete with Steel-Slag
Budiman Franky, Chandra Jimmy, Halim Alvin, Pudjisuryadi Pamuda (2023-04)
Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams:
An Experimental Study
Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
3D Printing of Limestone-Calcined-Clay-Cement:
A Review of Its Potential Implementation in the Construction-Industry
Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
Besklubova Svetlana, Tan Bing, Zhong Ray, Spicek Nikola (2023-04)
Logistic-Cost-Analysis for 3D Printing Construction Projects Using a Multi-Stage Network-Based Approach
Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
Qu Zhengyao, Yu Qingliang, Ong Ghim, Cardinaels Ruth et al. (2023-04)
3D Printing Concrete Containing Thermal Responsive Gelatin:
Towards Cold Environment Applications
Blagojevic Boris, Sawodny Oliver (2023-04)
Path-Planning for Graded Concrete Element Fabrication
Maurya Shubham, Dey Dhrutiman, Panda Biranchi, Dixit Uday (2023-04)
In-Line Reinforcement of Steel-Cable in 3D Concrete Printing
Delavar Mohammad, Chen Hao, Sideris Petros (2023-04)
Seismic Design Methodology for 3D Printed Concrete Buildings
Peav John, Hudson Ed, Summy Zachary, Violette Jon (2023-04)
3D Concrete Printed Houses:
Barriers to Adoption and Construction Practices
Rekhi Jagruti, Stern Alaina (2023-04)
3D Concrete Printed Construction:
Building the Future of Housing, Layer-by-Layer
Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2023-04)
Probabilistic Prediction of Structural Failure During 3D Concrete Printing Processes
Khan Shoukat, Jassim Muhammad, İlcan Hüseyin, Şahin Oğuzhan et al. (2023-04)
3D Printing of Circular Materials:
Comparative Environmental Analysis of Materials and Construction Techniques
Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-04)
Interfacial Weakness Criterion by Indentation in 3D Printed Concrete
Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
Cruz Gil, Dizon John, Farzadnia Nima, Zhou Hongyu et al. (2023-04)
Performance, Applications, and Sustainability of 3D Printed Cement and Other Geomaterials
Zbyszyński Wojciech, Pietras Daniel, Sadowski Tomasz (2023-04)
Data-Image-Correlation-Analysis of the Destruction-Process of 3D Printable Layered Beams Subjected to the Three-Point Bending Process
Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2023-04)
Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
Gong Fangyuan, Cheng Xuejiao, Wang Qinghua, Chen Yi et al. (2023-04)
A Review on the Application of 3D Printing Technology in Pavement Maintenance
Xu Nuoyan, Qian Ye (2023-04)
Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Notarnicola Michele et al. (2023-04)
3D Printed Concrete Blocks Made with Sustainable Recycled Material
Fischer Oliver, Bos Freek (2023-04)
Additive Manufacturing in Concrete Construction:
Ways to Implement It in Engineering Practice
Jaji Mustapha, Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-04)
Thixotropic Characterisation of Slag-Modified 3D Printable Metakaolin-Based Geopolymer Composite
Luo Jiaxiang, Gao Tianyi, Yuan Philip (2023-04)
Fabrication of Reinforced 3D Concrete Printing Formwork
Ma Guowei, Huang Chen, Zhang Junfei (2023-04)
Inner Damage-Identification and Residual Strength-Assessment of a 3D Printed Tunnel with Marble-Like Cementitious Materials Using Piezoelectric Transducers
Şahin Hatice, Temel Müge, Mardani Ali (2023-04)
Determination of Optimum VMA Utilization Dosage in Cementitious Systems:
In Terms of Rheological and Flowability Properties
Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
A Review
Salam Mohammad Abdul, Biernacki Joseph (2023-04)
2D Stationary Computational Printing of Cement-Based Pastes with Time-Dependent Rheology
Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
An Eco-Sustainable and Energy Saving Approach