Ding Tao¶

1. Ding Tao, Lian Hongqian (2026-01)
   Buildability Analysis of 3D Concrete Printing:
   A Finite Element Model Incorporating Segment-by-Segment Activation, Nozzle Constraint, and Extrusion Pressure
2. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
   Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
3. Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
   Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
4. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Chen Weihua (2025-09)
   Integrated Non-Destructive Assessment of 3D Printed UHPC Microstructure Using X-Ray Computed Tomography and Ultrasonic Waves
5. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
   Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
6. Lian Hongqian, Ding Tao (2025-09)
   Deformation of Inclined Concrete 3D Printing:
   A Computational Fluid Dynamics Analysis
7. Ding Tao, Dong Haining, Sikora Paweł, Lin Guan (2025-07)
   3D Printed Concrete Reinforced with Flexible Fiber Reinforced Polymer Strips or Grids:
   Concept and Bond Tests
8. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
   Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
   Utilizing Fibers and Recycled Aggregates as Gradient Components
9. Ding Tao, Peng Zechen, Dong Haining (2025-05)
   Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures
10. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
    Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
11. Shen Kaige, Ding Tao, Cai Chen, Xiao Jianzhuang et al. (2024-09)
    Feasibility-Analysis of 3D Printed Concrete with Sludge-Incineration-Slag:
    Mechanical Properties and Environmental Impacts
12. Li Bingying, Ding Tao, Qu Changwei, Liu Wei (2024-07)
    Modification of Fresh and Hardened Properties of 3D Printed Recycled Mortar by Superabsorbent Polymers
13. Bai Meiyan, Xiao Jianzhuang, Shen Jianyu, Ding Tao et al. (2024-07)
    Printability and Mechanical Anisotropy of 3D Printed Concrete with Manufactured Sand Derived from Basalt
14. Bai Meiyan, Xiao Jianzhuang, Wu Yuching, Ding Tao (2024-05)
    Experimental and Numerical Study on the Flexural Behavior of 3D Printed Composite Beams with U-Shaped ECC Formwork
15. Han Yilong, Zhu Lin, Xue Rui, Liu Chenyu et al. (2024-05)
    Unpacking the Dynamics of 3D Concrete Printing Adoption:
    An Integrated UTAUT-TOE Approach
16. Xiao Jianzhuang, Liu Haoran, Ding Tao, Yu Kequan et al. (2024-02)
    Rebar-Free Concrete Construction:
    Concept, Opportunities and Challenges
17. Ding Tao, Shen Kaige, Cai Chen, Xiao Jianzhuang et al. (2024-02)
    3D Printed Concrete with Sewage Sludge Ash:
    Fresh and Hardened Properties
18. Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
    Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
19. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
    A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
    Material-Preparation, Construction-Process and Structure-Level
20. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
    Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
    A Critical Review
21. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
    Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
22. Wang Ziyue, Chen Zixuan, Xiao Jianzhuang, Ding Tao (2023-03)
    Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar
23. Ding Tao, Wang Ziyue, Liu Haoran, Xiao Jianzhuang (2023-03)
    Simulation on Pull-Out Performance of Steel-Bar from 3D Printed Concrete
24. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
    Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
    Experimental and Numerical Analysis
25. Liu Haoran, Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2022-04)
    Buildability Prediction of 3D Printed Concrete at Early-Ages:
    A Numerical Study with Drucker-Prager-Model
26. Ding Tao, Qin Fei, Xiao Jianzhuang, Chen Xiaoming et al. (2022-01)
    Experimental Study on the Bond Behavior Between Steel-Bars and 3D Printed Concrete
27. Zou Shuai, Xiao Jianzhuang, Duan Zhenhua, Ding Tao et al. (2021-10)
    On Rheology of Mortar with Recycled Fine Aggregate for 3D Printing
28. Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
    Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces
29. Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
    Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
    A Cleaner Perspective on 3D Printing
30. Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
    Large-Scale 3D Printing Concrete Technology:
    Current Status and Future Opportunities
31. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
    Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
32. Xiao Jianzhuang, Liu Haoran, Ding Tao (2020-11)
    Finite-Element-Analysis on the Anisotropic Behavior of 3D Printed Concrete under Compression and Flexure
33. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
    3D Recycled Mortar Printing:
    System-Development, Process-Design, Material-Properties and On-Site-Printing
34. Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
    Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete
35. Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
    Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers
36. Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
    Hardened Properties of Layered 3D Printed Concrete with Recycled Sand
37. Ding Tao, Xiao Jianzhuang, Qin Fei, Duan Zhenhua (2020-03)
    Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early-Ages
38. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
    A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
    Materials and Construction Technology