2025-05
- Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
- Pereira Carolina, Vieira Henrique, Gonçalves Nuno, Ascensão Guilherme et al. (2025-05)
Innovative Waste-Containing 3D-Printed Geopolymer Structures for Enhanced Acoustic Comfort in Built Environments
- Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
A (P)Review:
Adhesion of Printcrete for Tunnel Structures
- Rojas Jorge, Hasanzadeh Sognad (2025-05)
An Integrated BIM Planning Workflow for 3D Concrete Printing Projects
- Trung Hieu Nguyen, Minh Trieu Nguyen, Dang Tri, Thinh Nguyen (2025-05)
Advanced Sliding Mode Control Strategy for High-Performance 3D Concrete Printing
- Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
Experimental and Analytical Investigations
- Song Xinlei, Xu Quanbiao, Wang Hailong, Sun Xiaoyan et al. (2025-05)
Flowability-Dependent Anisotropic Mechanical Properties of 3D Printing Concrete:
Experimental and Theoretical Study
- Wang Junsong, Ye Haoran, Sun Yating, Zhang Zixin et al. (2025-05)
Integration of 3D Printed Fiber Concrete and OpenSeesTO for Enhanced Structural Design
- Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
- Fasihi Ali, Libre Nicolas (2025-05)
Towards Accurate In-Situ Static Yield Stress Measurement for 3D Concrete Printing:
A Study on Novel Fast Penetration Test
- Rückrich Stefanie, Austern Guy, Denay Ofer, Seiwert Paul et al. (2025-05)
3D-Printed Earth-Fiber Envelopes:
Optimization of Thermal Performance and Industrial Applicability
- Geng Songyuan, Cheng Boyuan, Long Wujian, Luo Qiling et al. (2025-05)
Co-Driven Physics and Machine Learning for Intelligent Control in High-Precision 3D Concrete Printing
- Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
An Overview of 3D Printed Concrete for Building Structures:
Material Properties, Sustainability, Future Opportunities, and Challenges
- Munemo Rue, Kruger Jacques, Zijl Gideon (2025-05)
Surface Treatment of 3DPC Interlayers with Silicate-Based Solution for Enhanced Interfacial Bonding
- Tao Yaxin, Zhang Yi, Mohan Manu, Dai Xiaodi et al. (2025-05)
Waste-Derived Aggregates in 3D Printable Concrete:
Current Insights and Future Perspectives
- Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
Recent Innovations and Implementations of 3D Printing in the Building and Construction Sector
- Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
A Comprehensive Analysis on Material Properties and Specialized Applications in 3D Concrete Printing
- Nayaka Ramesh, Kumar H., Sharif Ahamed, Zhang Y. (2025-05)
Exploring Key Aspects and Sustainable Benefits of 3D Concrete Printing (3DCP):
A Selective Review
- Qi Pengfei, Wang Ziyuan, Yu Ruifang, Pei Qiang et al. (2025-05)
Optimization Design and Regression Model Analysis of Mechanical Properties of 3D Printed Concrete
- Nieświec Martyna, Chajec Adrian, Šavija Branko (2025-05)
Effect of Ground Copper Slag on the Fresh Properties of 3d Printed Cementitious Composites
- Yu Kun-Hao, Teng Teng, Nah So, Chai Hua et al. (2025-05)
3D Concrete Printing of Triply Periodic Minimum Surfaces for Enhanced Carbon Capture and Storage
- Aly Ahmed Aly, Mantawy Islam (2025-05)
Additive Construction of Low Embodied Carbon Concrete:
Geopolymer Concrete
- Sun Yuhang, Wang Haonan, Zhang Yi, Liu Xiongfei et al. (2025-05)
Spray-Based 3D Printed Foam Concrete:
Stress Concentration Relieve Utilization
- Ding Tao, Peng Zechen, Dong Haining (2025-05)
Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures
- Raza Ali, Junjie Zhang, Fan Jiahui, Umar Muhammad et al. (2025-05)
Comprehensive Study on the Microstructural and Mechanical Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Integration
- Sun Junbo, Aslani Farhad, Mann Dhruv, Huang Bo et al. (2025-05)
Mechanical and Piezoresistive Behaviour of 3D Printed Self-Sensing One-Way Concrete Slab
- Asaue Hisafumi, Shiotani Tomoki, Okude Nobuhiro, Ogura Hiroki et al. (2025-05)
Clarification of Fracture Behaviour of RC Pillar with 3D Concrete Printing Buried Formwork Based on Elastic Wave Technique
- Cai Lixiong, Chen Feida, Xie Dingkun, Ye Keming (2025-05)
Time-Varying Work Performance of Cementitious 3D Printing Mortar:
Effect of SAC, H-PC and HPMC
- Čítek David, Melter Oto, Hvizdal Ales, Auska Zuzana et al. (2025-05)
Experimental 3D Printed Concrete Footbridge
- Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
- Raza Saim, Sakha Mahsa, Hassan Zohaib, Manshadi Behzad et al. (2025-05)
Flexural Behavior of Stay-in-Place Load-Bearing 3D-Printed Concrete Formwork for Ribbed Slabs
- Yamamoto Yujin, Kinomura Koji, Murata Satoshi, Asaue Hisafumi et al. (2025-05)
Seismic Performance of RC Column Surrounded by 3D Printed Concrete Permanent Formwork with Short Fiber
- Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2025-05)
Mechanical Properties of Extrusion-Based 3D-Printed Concrete Considering the Thickness of the Printed Layer and Printing Time Interval
- Ahadi Bahram, Valiente López María (2025-05)
Zigzag Reinforcement Method for 3D Concrete Printing
- Avşar Yunus, Uysal Mücteba, Akca Abdullah (2025-05)
Improvement of 3D Printing Properties of MgO Derived Binders by CO2 Curing in Hardened State
- Bettermann Luca, Slepicka Martin, Esser Sebastian, Borrmann André (2025-05)
Data-Driven Parameter Calibration in Additive Manufacturing for Construction:
An Introduction to Learning by Printing
- Ersoy Seher, Abuqasim Shaima, Kurtay Yıldız Mine, Öztürk İrfan et al. (2025-05)
Machine Learning Approximation of Water Transport in 3D-Printable Composites via Karsten Tube
- Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
From Waste to Strength:
Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
- Mei Shiming, Li Zheng-Wei, He Ben, Song Jiaqi et al. (2025-05)
A Novel Large-Scale 3D Printing Apparatus for Complex Geological Models and Its Application
- Mukhtar Faisal (2025-05)
3D-Printed Concrete Fracture:
Effects of Cohesive Laws, Mixes, and Print Parameters in 3D EXtended FEM
- Sarıkaya M., Benam Shaghayegh, Yılmaz Taner, Erkmen Bülent et al. (2025-05)
Seismic Performance Assessment of 3D-Printed Concrete Structures
- Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2025-05)
Flexural Performance of Glass Fiber Textile Reinforced 3D Printed Concrete
- Asif Usama (2025-05)
Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
- Chippagiri Ravijanya, Lanjewar Bhagyashri, Kamath Muralidhar, Ralegaonkar Rahul (2025-05)
Prediction of Construction Materials for Conventional and Alkali-Activated 3D Concrete Printing
- Jin Chenxi, Xu Chenhan, Xu Weishun (2025-05)
Integrating 3D-Printed Clay Formwork into Thin-Vaulted Green Roof
- Liu Qiong, Singh Amardeep, Wang Qiming, Qifeng Lyu (2025-05)
3D-Printed Application in Concretes
- Niroumand Hamed, Bałachowski Lech (2025-05)
Green Building with 3D Printed Earth Materials:
Current Issues and Future Prospects of 3D Printed Green Houses for the Construction Sector
- Salifu N., Bassuoni Mohamed, Guven Gursans (2025-05)
Performance Evaluation of Limestone-Blended Cement and Cellulose Nanomaterials in 3D Concrete Printing
- Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns
- Görtzen Tom, Neef Tobias, Scheffler Philipp, Macek Domen et al. (2025-05)
3D Concrete Printing of Topological Interlocking Blocks
- Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
A Review of Advances in Laboratory and Real-Scale Construction Projects
- Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
- Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
- Zhang Bo, Tao Yaxin, Zhang Yi, Shields Yasmina et al. (2025-05)
Mechanical Properties of 3D Printed Concrete with 2D Infill Patterns Including Print Path Crossings
- Zhou Zhuang, Shi Xinyu, Zhou Haining, Liang Yuan et al. (2025-05)
Research on 3DPC Construction Method for Structural High-Performance Component Generation
- Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
- Chen Zhaohui, Yue Ziyi, Gerong Wangdui, Wang Zhenyue et al. (2025-05)
Effect of Orthotropy and Printing Patterns on the Bending Performance of 3D Printed Concrete Grid Components
- Gribonval Alice, Pierre Maxime, Ducoulombier Nicolas, Sab Karam et al. (2025-05)
Multi-Physics Modelling of 3D-Printed Concrete Evolution in Environmental Conditions
- Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
- Kandagaddala Revanth, Boddepalli Uday, Nanthagopalan Prakash (2025-05)
Novel Rheological Test Procedure for Printability Characterization of 3D Printable Mortar
- Lopes Sousa Israel, Liu Han, Alessandro Antonella, Laflamme Simon et al. (2025-05)
Piezoresistive Performance of 3D Printed Cementitious Composites Doped with Carbon Microfibers
- Safal K., Liu Han, Lopes Sousa Israel, Laflamme Simon et al. (2025-05)
Investigation of 3D Printed Concrete for Real-Time Monitoring of Additive Manufacturing Process
- Aminpour Nima, Memari Ali (2025-05)
Development of EPS Light‐weight Concrete for 3D Printing
- Demirbaş Ali, Tuğluca Merve, Şahin Oğuzhan, İlcan Hüseyin et al. (2025-05)
A Comprehensive Study on the Valorization of Recycled Concrete Aggregates in 3D-Printable Cementitious Systems
- Luo Xiaoyu, Zhao Yuqi, Yao Xiaofei, Zou Cunjun et al. (2025-05)
3D Printing Concrete Interface Treatment Based on Physical and Chemical Methods:
A Review
- Gantner Stefan, Rennen Philipp, Amiri Fatemeh, Rothe Tom et al. (2025-05)
Robotic Frame Winding:
Prefabricated Fiber Structures as Formwork and Reinforcement for Digitally Fabricated Shell-Like Concrete Elements
- Jia Yanhong, Chen Yao, Li Yanchen, Le Huirong (2025-05)
Impacts of the Rheological Performance on Dynamic Printing of Metakaolin-Based Geopolymer
- Kuang Hao, Deng Yang, Wang Dong, Jian Shouwei et al. (2025-05)
Strengthening Effect of In-Situ Sprayed UV-Curable Polyurethane-Acrylate Resin Coating on Slag-Based 3D Printing Concrete
- Liang Yingming, He Jincheng, Niu Like, Chen Junwei et al. (2025-05)
Experimental Study on Printability of Solid Waste Concrete Based on 3D Printing Technology
- Sapata Alise, Šinka Māris, Puzule Līga, Plūmiņš Ernests et al. (2025-05)
Developing Low-CO₂ 3D-Printable Concrete with Waste Ash and Recycled Aggregates
- Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
Recovery of Mechanical Performance and Self-Sealing Capability
- Khanverdi Mohsen, Das Sreekanta (2025-05)
Performance of Full-Scale 3D-Printed Concrete Walls:
Effects of Vertical Reinforcements and Window Opening
- Liu Xingzi, Xu Jie, Dobrzanski James, Kolawole John et al. (2025-05)
Factors Affecting the Flexural Performance of Reinforced 3D Printed Concrete Beams
- Lori Ali, Novais Rui, Ascensão Guilherme, Fernandes Fábio et al. (2025-05)
Chemically Foamed Geopolymers for 3D Printing Applications
- Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
- Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
- Das B., Prathap Y., Sandeep Ankit, Vaghamshi Keval et al. (2025-05)
Reviewing the Materials Selection, Rheology, Durability, and Microstructural Characteristics of 3D Printed Concrete
- Thib Raghed, Taleb Maria, Belayachi Naima, Bulteel David et al. (2025-05)
Hardened Properties of 3D Printable Mortars with Full Replacement of Natural Sand by Recycled Sand
- Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
From Printing to Performance:
A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment
- Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi et al. (2025-05)
Modelling of 3D Concrete Printing Based on SPH Method with the Herschel-Bulkley-Papanastasiou Rheology Model
- Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2025-05)
A Comparative Study on the Effectiveness of Fly Ash and Blast Furnace Slag as Partial Cement Substitution in 3D Printable Concrete
- Zhang Bo, Corte Wouter, Ooms Ticho, Wan-Wendner Roman (2025-05)
Mechanical Properties of Particle-Bed 3D Printed Concrete Infill Patterns
- An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
Experimental Study and Smooth Particle Hydrodynamics Modelling
- Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
- Becher Anton, Gądek Szymon, Korniejenko Kinga (2025-05)
3D Printing with Geopolymers and Its Applications