Liu Chao¶

1. Lv Liping, He Jing, Chen Jiazhe, Xu Dan et al. (2026-04)
   Integrated Multi-Objective Optimization for Multi-Head Collaborative 3D Concrete Printing via a Trinary-Tree Enhanced Genetic Algorithm
2. Wu Yiwen, Liu Chao, Liu Huawei, Pan Zhihong et al. (2026-03)
   Multiscale Mechanistic Insights into the Dual Effect of Interlayer Reinforcement on the Shear Behavior of 3D-Printed Concrete Composite Walls
3. Zhu Chao, Li Hairuo, Liu Chao, Zhao Nan et al. (2026-03)
   Freeze-Thaw Resistance of 3D Printed Concrete:
   Comprehensive Evaluation of Material Properties and Printing Parameters
4. Zhu Wenxuan, Zhang Yu, Zhang Yunsheng, Liu Chao et al. (2026-02)
   Multiscale Investigation of Manufactured Sand Characteristics on 3D Printed Concrete Performance:
   Particle Morphology and Stone Powder Effects
5. Liu Huawei, Dai Meiling, Liu Chao, Du Hongjian (2026-02)
   Targeted Enhancement Strategy for the Rebar Interface Bond in 3D Printed Coarse Aggregate Concrete: Performance Evaluation and Mechanistic Insights
6. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhu Chao et al. (2026-02)
   Rheological Rejuvenation and Structural Build-up of 3D Printed Manufactured Sand Concrete via Secondary Mixing Protocol
7. Liu Chao, Ma Ruiyang, Liu Huawei, Dai Meiling et al. (2026-02)
   Shrinkage in Concrete Additive Manufacturing:
   A Critical Review of Mechanisms, Characterization, and Control Strategies
8. Liu Liangchao, Liu Huawei, Ma Ruiyang, Wang Zihao et al. (2026-01)
   A Review of Carbon Capture, Utilization and Storage Technologies in Concrete Additive Manufacturing
9. Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
   Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
10. Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
    3D Printed Concrete with Recycled Coarse Aggregate:
    Freeze-Thaw Resistance Assessment and Damage Mechanisms
11. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
    Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
12. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
    Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
13. Liu Chao, Li Xin, Wu Yiwen, Liu Huawei et al. (2025-03)
    Impact of External Loading on the Time-Dependent Evolution of 3D Printed Concrete with Recycled Sand in the Green State
14. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
    Seismic Performance of 3D Printed Reinforced Concrete Walls:
    Experimental Study and Numerical Simulation
15. Liu Chao, Liu Huawei, Wu Yiwen, Wu Jian et al. (2025-02)
    Effect of X-Ray CT Characterized Pore Structure on the Freeze-Thaw Resistance of 3D Printed Concrete with Recycled Coarse Aggregate
16. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
    Design of 3D Printed Concrete Masonry for Wall Structures:
    Mechanical Behavior and Strength Calculation Methods Under Various Loads
17. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
    Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
    Shear Properties and Enhancement Methods
18. Liu Chao, Banthia Nemkumar, Shi Yifan, Jia Zijian et al. (2024-09)
    Early-Age Shrinkage Mitigation and Quantitative Study on Water Loss Kinetics of 3D Printed Foam-Concrete Modified with Superabsorbent Polymers
19. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
    Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
    From Yield-Stress , Viscosity and Surface Tension Point of View
20. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
    Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
21. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
    Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
    Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
22. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
23. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
    Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
    Insights from the Excess-Paste-Theory
24. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
    Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
25. Ma Zongfang, Duan Ming, Liu Chao, Liu Huawei et al. (2023-07)
    Better Semantic Segmentation For 3D Printing Concrete Surface Pore Detection
26. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
    Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
27. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2023-03)
    3D Printed Concrete with Recycled Sand:
    Pore-Structure and Triaxial Compression Properties
28. Liu Chao, Wang Zhihui, Wu Yiwen, Liu Huawei et al. (2023-02)
    3D Printing Concrete with Recycled Sand:
    The Influence Mechanism of Extruded Pore-Defects on Constitutive Relationship
29. Ma Zongfang, Wan Weipeng, Song Lin, Liu Chao et al. (2022-11)
    An Approach of Path-Optimization Algorithm for 3D Concrete Printing Based on Graph-Theory
30. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
    Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
31. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
    3D Printing Concrete with Recycled Coarse Aggregates:
    The Influence of Pore-Structure on Inter-Layer Adhesion
32. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
    From Water State and Flocculation Point of View
33. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-06)
    Hardened Properties of 3D Printed Concrete with Recycled Coarse Aggregate
34. Liu Huawei, Liu Chao, Bai Guoliang, Wu Yiwen et al. (2022-04)
    Influence of Pore-Defects on the Hardened Properties of 3D Printed Concrete with Coarse Aggregate
35. Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
    Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
    Effect of Precursor Nature
36. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
37. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
    Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
38. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
    Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
39. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
    Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
40. Wu Yiwen, Liu Chao, Liu Huawei, Zhang Zhenzi et al. (2021-07)
    Study on the Rheology and Buildability of 3D Printed Concrete with Recycled Coarse Aggregates
41. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete