Banthia Nemkumar¶

1. Zhang Chao, Zhu Xiaohong, Li Muduo, Zhang Yuying et al. (2025-10)
   Enhancing Interface Adhesion of 3D Printable Concrete by Biochar Integration
2. Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
   The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
3. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
   Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
4. Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
   3D Printing Technology in Concrete Construction
5. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
   The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
6. Shilton Robert, Wang Shen, Banthia Nemkumar (2024-12)
   Use of Polysaccharides as a Rheology-Modifying-Admixture for Alkali-Activated Materials for 3D Printing
7. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
   Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
8. Liu Chao, Banthia Nemkumar, Shi Yifan, Jia Zijian et al. (2024-09)
   Early-Age Shrinkage Mitigation and Quantitative Study on Water Loss Kinetics of 3D Printed Foam-Concrete Modified with Superabsorbent Polymers
9. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
   Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
   From Yield-Stress , Viscosity and Surface Tension Point of View
10. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
    Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
    Insights from the Excess-Paste-Theory
11. Wang Xianlin, Banthia Nemkumar, Yoo Doo-Yeol (2023-11)
    Reinforcement Bond Performance in 3D Concrete Printing:
    Explainable Ensemble Learning Augmented by Deep Generative Adversarial Networks
12. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
    Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
13. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
    Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
14. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
    Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
15. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
    From Water State and Flocculation Point of View
16. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
    Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
17. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
18. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
    Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
19. Sukontasukkul Piti, Panklum Kasidet, Maho Buchit, Banthia Nemkumar et al. (2021-12)
    Effect of Synthetic Micro-Fiber and Viscosity-Modifying-Agent on Layer Deformation, Viscosity, and Open-Time of Cement Mortar for 3D Printing Application
20. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete
21. Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
    Mix-Design Concepts for 3D Printable Concrete:
    A Review
22. Biernacki Joseph, Bullard Jeffrey, Sant Gaurav, Banthia Nemkumar et al. (2017-04)
    Cements in the 21st Century:
    Challenges, Perspectives, and Opportunities