2025-08¶

1. Jankovský Ondřej, Lodňánek Petr, Lauermannová Anna-Marie, Jiříčková Adéla et al. (2025-08)
   Use of Ladle Furnace Slag as Filler Replacement in Magnesium Oxychloride Cement:
   Towards Sustainable 3D-Printable Building Composites
2. Ghodke Swapnil, Singh Arshdeep, Singh Bhupinder, Chowdhury Shubhankar (2025-08)
   Additively Manufactured Smart Materials and Structures in Construction and Building Applications
3. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
   A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
4. Alonso-Cañon Sara, Alonso-Estebanez Alejandro, Yoris-Nobile Adrian, Brunčič Ana et al. (2025-08)
   Rheological Parameter Ranges for 3D Printing Sustainable Mortars Using a New Low-Cost Rotational Rheometer
5. Liao Minmao, Gerong Wangdui, Wang Pengfei, Chen Zhaohui (2025-08)
   Determination of Elastic Engineering Constants in an Orthotropic Constitutive Model for Hardened 3D-Printed Concrete
6. Liu Tong, Du Song, Teng Fei, Weng Yiwei (2025-08)
   Energy Consumption Modeling for a Robot Arm in 3D Concrete Printing
7. Lyu Libo, Li Weihong, Deng Yongjie, Yu Qiuchun et al. (2025-08)
   Engineering Properties of Magnesium Phosphate Cement Lunar Soil Concrete Under Vacuum Conditions and Its 3D Printing Application for Lunar Dome Model
8. Ozturk Onur, Lunsford Caleb, Strait James, Nair Sriramya (2025-08)
   Breaking Barriers in Underwater Construction:
   A Two-Stage 3D Printing System with On-Demand Material Adaptation
9. Quah Tan, Liu Zhixin, Tay Yi, Li Mingyang et al. (2025-08)
   In-Process Filament Repair in 3D Concrete Printing with Instance Segmentation
10. Yarlagadda Tejeswar, Zhang Zixin, Jiang Liming, Usmani Asif (2025-08)
    A Conceptual Model for Building Artistic and Geometrically Complex Building Envelopes Using Concrete 3D Printing
11. Baritakis Mario, Traine Phillip, Granzow Jan, Döbert Christine (2025-08)
    3D-Printed Clay Formwork for Topology:
    Optimized Concrete Elements
12. Mak Bunleang, Kim Tae, Dong Won-Jun, Shim Chang (2025-08)
    Crack Width Investigation of Reinforced Concrete Beam with 3D Concrete Printed Formwork Using Modified Parameters
13. Yang Shuai, Li Fei, Lu Ya, Xu Xiaoming et al. (2025-08)
    Study of the Printing Characteristics of a 3D Printing Solution for the Purpose of Process Optimization
14. Zhang Yifan, Aslani Farhad (2025-08)
    Mechanical and Ultrasonic Pulse Velocity Performance of 3D Printed Rubberised Cementitious Composites Reinforced with PVA Fibers
15. Zhang Jiawei, Sun Yuanfeng, Bu Dechao, Lu Cong et al. (2025-08)
    Rheology-Tailored 3DP-UHPC:
    From Enhanced Printability to Impact Performance
16. Lin Manfang, Ding Yao, Yu Fan, Li Lingzhi et al. (2025-08)
    Synergistic Strengthening of 3D‑printed ECC Beams Through Steel-Wire Mesh and Interfaces Treatments
17. Lin Yini, Yan Jiachuan, Sun Ming, Tang Boyang et al. (2025-08)
    Effects of Waste Glass Powder on Printability, Hydration and Microstructure of 3D Printing Concrete
18. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
    Revolutionizing Architecture:
    3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
19. Banihashemi Saeed, Akbarnezhad Ali, Sheikhkhoshkar Moslem, Haouzi Hind et al. (2025-08)
    3D Printing in Construction:
    Sustainable Technology for Building Industry
20. Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
    Influence of Process Parameters on 3D Concrete Printing:
    A Step Towards Standardized Approaches
21. Zhou Yuecheng, Xiao Sai, Li Haonian, Wang Chong et al. (2025-08)
    Study on the Rheological Properties and Printability of Multi-Scale Material Modified Mortar for 3D Printing
22. Berman Ofer, Zavadsky Andrey, Drimer Nitai, Shashar Nadav et al. (2025-08)
    A Pure Ceramic 3D Printed Artificial Reef:
    Stability and Response
23. Wang Chaofan, Chen Bing, Wang Yong, Vo Thanh et al. (2025-08)
    Influencing Mechanism of Magnesium-to-Phosphate Ratio on the Rheology and Microstructure Development of 3D-Printed Magnesium Phosphate Cement at Early Hydration
24. Wang Cheinfei, Lian Junyin, Fang Yunhui, Fan Guangming et al. (2025-08)
    Rheological Optimization of 3D-Printed Cementitious Materials Using Response Surface Methodology
25. Yu Qian, Zhang Yamei, Pan Jinlong (2025-08)
    Multi-Scale Orthotropic Damage Constitutive Model for 3D Printed Concrete Informed by Pore Structure
26. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
    Optimization of Building Structures Based on Additive Manufacturing:
    A Review
27. Zhang Nan, Sanjayan Jay (2025-08)
    Concrete 3D Printing and Digital Fabrication Technologies for Bridge Construction
28. Bradford Katy, Gentry Russell, Alon Lola, Kurtis Kimberly (2025-08)
    Construction 3D Printing Material Selection:
    Minimizing Cost and Carbon Footprint of Residential Wall Assemblies
29. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
    Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
30. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
    Transformative Low-Carbon 3D-Printed Infrastructure:
    Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
31. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
    Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
    Effect of Cold Joint, Axial Load and Load Type
32. Si Wen, Carr Liam, Zia Asad, Khan Mehran et al. (2025-08)
    Advancing 3D Printable Concrete with Nanoclays:
    Rheological and Mechanical Insights for Construction Applications
33. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2025-08)
    Experimental Study on Buildability of 3D-Printed Cement-Based Structures Using Aluminium Sulphate
34. Henao-Rios Laura, Orobio Armando, Campaña Wilmer (2025-08)
    BIM Integration in Prefabricated Additive Construction Projects:
    Case Study
35. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
    Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
36. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
    Anisotropy of Mechanical Properties of 3D-Printed Materials:
    Influence of Application Time of Subsequent Layers
37. Abid Khasim, Syed Sajid, Khan Majid (2025-08)
    Explainable Machine Learning-Based Model for Predicting Interlayer Bond Strength in 3D Printed Concrete
38. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
    Innovative Reinforcement Techniques for 3D-Printed Concrete:
    The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
39. Yao Weijing, Gao Yangyunzhi, Huang Xin, Du Hongjian (2025-08)
    Influence of Printing Speed and Extrusion Speed on the Performance and Pore Structures of 3D Printed Mortar
40. Boddepalli Uday, Kandagaddala Revanth, Nanthagopalan Prakash (2025-08)
    Evaluation of Alkali-Activated Limestone Calcined Clay Mortars for 3D Concrete Printing Applications
41. Dietrich Sebastian, Schneider Philip, Richter Christiane, Najian Asl Reza et al. (2025-08)
    Multi-Fidelity Structural Design for 3D Concrete Printing with Selective Paste Intrusion
42. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
    Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
43. Kumar Rohan, Das Nabodyuti, Nanthagopalan Prakash (2025-08)
    Novel Interlocking Nozzle Geometry for Enhanced Interlayer Strengthening in 3D Concrete Printing
44. Lu Qianyang, Mei Song, Ateah Ali, Alsubeai Ali et al. (2025-08)
    Investigating the Strength Performance of 3D Printed Fiber-Reinforced Concrete Using Applicable Predictive Models
45. Sapata Alise, Pluminss Ernests, Šlosbergs Pēteris, Šinka Māris (2025-08)
    Utilizing Construction Demolition Waste Aggregates in Cement- Free Concrete for 3D Printing
46. Aydin Tolga, Sandalci Ilgin, Aydin Eylül, Kara Burhan et al. (2025-08)
    Investigation of Bacterial Cells and Clays as Rheology Modifiers in 3D Concrete Printing
47. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
    Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
48. Xiao Yinan, Vandenberg Aileen, Lowke Dirk, Mai (née Dressler) Inka et al. (2025-08)
    Automated Robotic Assembly Planning of Space Trusses for Injection 3D Concrete Printing
49. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
    Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
50. Geng Shao-bo, Zhang Chen, Zhang Hui, Hai Lu et al. (2025-08)
    Upcycling Coal Gangue Coarse Aggregates into 3D Printed Concrete:
    Multi-Scale Mechanisms of Fracture Behaviour
51. Limlunjakorn Torpong (2025-08)
    The Designing of 3D-Printed Modular Artificial Reefs Through Design Thinking Framework:
    A Case Study in Koh Khai, Chumphon Province, Thailand
52. Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
    Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
    Design, Mechanical Properties and Microstructural Analysis
53. Kantaros Antreas, Ganetsos Theodore, Kanetaki Zoe, Stergiou Constantinos et al. (2025-08)
    Design and Fabrication of Customizable Urban Furniture Through 3D Printing Processes
54. Mani Aravindhraj, Sekar Muthu (2025-08)
    NDT Techniques for Evaluating Mechanical Properties in Green and Fiber-Reinforced 3D Printable Mixes
55. Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
    Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures
56. Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
    Interface Bonding in 3D-Printed Concrete:
    Experimental Evaluation and Numerical Modeling
57. Syed Mohammad, Sharma Sumedh, Koliou Maria, Sideris Petros (2025-08)
    Economic Analysis of 3D-Printed Hempcrete Buildings
58. Francescangeli M., Toma D., Mendizabal V., Carandell M. et al. (2025-08)
    Artificial Reef Based Ecosystem Design and Monitoring
59. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
    From Waste to Strength:
    Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
60. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
61. Khan Hilal, Zahid Zamil, Hussain Fazal, Ahmad Junaid et al. (2025-08)
    Sustainable Multifunctional Biochar-Based Cementitious Composites for Carbon Sequestration, Energy Storage, and Smart Infrastructure Applications:
    A Review
62. Li Nan, Deng Yongjie, Li Weihong, Li Lingyu et al. (2025-08)
    Performance of Active-Magnesia-Based Magnesium Phosphate Cement and Application of Rapid-Solidification 3D Printing Technology
63. Wagner Gabriel, Silva João, Ribeiro João, Figueiredo Bruno et al. (2025-08)
    A Novel and Flexible Approach to Modeling the Additive Manufacturing Extrusion of Cementitious Materials
64. Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
    Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete
65. Siqueira Neto Luiz, Isgor Burkan, Weiss William (2025-08)
    Modeling Fluid Absorption in Layered Anisotropic Cement-Based Materials