Pan Jinlong¶

1. Wang Qingwei, Pan Jinlong, Han Song, Zhu Binrong et al. (2026-03)
   Effects of Nozzle Height on the Layer Deposition Process and Forming Performance of 3D Printing Concrete:
   Evidence from Experiments and CFD Simulations
2. Yu Qian, Zhu Binrong, Liu Xun, Chen Wei et al. (2026-02)
   Pore Morphology and Orientation-Induced Mechanical Orthotropic Behavior of 3D-Printed Concrete Filament
3. Sheng Zhaoliang, Ding Shaolong, Zhu Binrong, Cai Jingming et al. (2026-01)
   Bonding Performance of Toothed Interfaces in 3D Printed Alkali-Activated Concrete
4. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
   Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
5. Zhu Binrong, Liu Xuhua, Wei Yang, Pan Jinlong (2025-11)
   Predicting the Tensile Performance of 3D-Printed PE Fiber-Reinforced ECC Based on Micromechanics Model
6. Yu Qian, Zhang Yamei, Pan Jinlong (2025-08)
   Multi-Scale Orthotropic Damage Constitutive Model for 3D Printed Concrete Informed by Pore Structure
7. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
   Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
8. Chen Wei, Pan Jinlong, Zhu Binrong, Han Jinsheng et al. (2025-03)
   Nonlinear Predictive Modeling of Building Rates Incorporating Filament Compression Deformations in 3D Printed Geopolymer Concrete
9. Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
   Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
10. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
    Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
11. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
    Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
12. Yu Qian, Zuo Qinxin, Zhang Yamei, Pan Jinlong (2024-08)
    An Investigation on Enhancing the Bonding Properties of 3D Printed Concrete Permanent Formwork and Post-Casted Concrete
13. Pan Jinlong, Ping Pengxin, Ding Boyin, Zhu Binrong et al. (2024-03)
    Impact Behavior of 3D Printed Fiber-Reinforced Cementitious Composite Beams
14. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Li Xuesen et al. (2024-03)
    Development of a Novel Extrusion-Device to Improve the Printability of 3D Printable Geopolymer Concrete
15. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
    Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
16. Yu Qian, Zhu Binrong, Li Xuesen, Meng Lingqi et al. (2023-04)
    Investigation of the Rheological and Mechanical Properties of 3D Printed Eco-Friendly Concrete with Steel-Slag
17. Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
    Bond Behavior Between Steel-Bars and 3D Printed Concrete:
    Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
18. Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
    Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites
19. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
    Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
20. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
    Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
21. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete
22. Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
    Large-Scale 3D Printing Concrete Technology:
    Current Status and Future Opportunities
23. Zhu Binrong, Nematollahi Behzad, Pan Jinlong, Zhang Yang et al. (2021-04)
    3D Concrete Printing of Permanent Formwork for Concrete Column Construction
24. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
    Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
25. Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
    On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites
26. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
    Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
27. Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
    Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction