2026-02¶

1. Cheng Hanbin, Duarte José, Memari Ali, Bilén Sven et al. (2026-02)
   Recycled Cork Aggregate for 3D Concrete Printing:
   Rheology, Pore-Driven Anisotropy Mitigation, and Low-Carbon Thermal Buffering
2. Yu Qian, Zhu Binrong, Liu Xun, Chen Wei et al. (2026-02)
   Pore Morphology and Orientation-Induced Mechanical Orthotropic Behavior of 3D-Printed Concrete Filament
3. Das Souvik, Lee Jonathan, Wei Jianqiang (2026-02)
   Tailoring Ultra-High Performance Concrete for Additive Manufacturing:
   Synergistic Roles of Superplasticizer and Viscosity-Modifying Admixture in Printability and Performance
4. Du Guoqiang, Sun Yan, Deng Xiaowei, Qian Ye (2026-02)
   Bending Performance of Bio-Inspired 3D Printed Porous Lattice SHCC Circular Arch Structures
5. Liu Jiaxu, Zhang Nan, Xie Xiangyu, Sanjayan Jay et al. (2026-02)
   Orientation and Spatial Distribution of Pores and Fibers in Concrete Elements Produced by Extrusion-Based 3D Printing
6. Marchuk Vitaliy, Makarenko Ruslan, Dvorkin Leonid, Ribakov Yuri (2026-02)
   Modifying the Properties of Construction Mixtures Containing Crushed Concrete Waste for 3D Printing
7. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-02)
   Experimental and Multi-Scale Modelling Investigation of Printable, Low-Cement Engineered Cementitious Composites with Different Polyethene Fiber Contents
8. Barbhuiya Salim, Qazi Nadeem, Das Bibhuti, Katare Vasudha (2026-02)
   Machine Learning Integration for Smarter, More Adaptive Systems in Large-Scale 3D Printing
9. Deng Yongjie, Li Weihong, Li Wei, Lyu Libo et al. (2026-02)
   Optimized Mix Design and 3D Printing Application of Magnesium Oxysulfate-Based Martian Concrete Using 100% In-Situ Resources
10. Tripathi Avinaya, Maurya Ashutosh, Rajan Subramaniam, Neithalath Narayanan (2026-02)
    Finite-Element Modeling Framework for Mechanical Response of 3D-Printed Concrete:
    Elucidating Directional, Interface, and Fiber Effects
11. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-02)
    Experimental and Finite Element Studies of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
12. Kong Depeng, Bai Bing, Chen Jing, Zhang Haiqing (2026-02)
    Experimental Study on the Pumpability of RFG Geopolymer Concrete
13. Ding Shengxuan, Li Jiren, Wang Mingqiang (2026-02)
    Mechanical Performance and Life-Cycle Carbon Reduction Benefits of 3D-Printed Permanent-Formwork Columns Filled with Low-Magnesia Concrete
14. Lolli Francesca, Mehlomakulu Bungane, Azari Jafari Hessam, Kirchain Randolph et al. (2026-02)
    On the Sustainability of Digital Construction:
    Whole Building Life Cycle Carbon Emissions According to Three Construction Techniques
15. Zhu Wenxuan, Zhang Yu, Zhang Yunsheng, Liu Chao et al. (2026-02)
    Multiscale Investigation of Manufactured Sand Characteristics on 3D Printed Concrete Performance:
    Particle Morphology and Stone Powder Effects
16. Mishra Sanjeet, Das Bibhuti, Chandrasekaran Rajasekaran, Barbhuiya Salim (2026-02)
    Tuning the Hydration and Printability in Nano-Modified Quaternary Binder Systems for 3D-Printed Mortar
17. Wang Longsheng, Huang Zili, Nguyen Giang, Karakus Murat (2026-02)
    Improving Interlayer Adhesion of 3D Printed Concrete by Filament Interlocking
18. Esan Taiwo, Kupolati Williams, Ackerman Chris (2026-02)
    Advances in Additive Manufacturing for Architectural Acoustics:
    Design, Materials, Validation, and Implementation Challenges in Building Construction
19. Guo Peixi, Zhang Hanwen, Ge Enmu, Lin Ming et al. (2026-02)
    Optimization and Performance Study of 3D Printed Concrete Mixture for Underground Utility Tunnels
20. Khalil Jawad, Fakih Amin, Yaseen Zaher, Osta Mohammed et al. (2026-02)
    Influence of Chemical Components and Molar Ratios on Strength Development of One-Part Alkali-Activated Mortar: Ensemble Machine Learning Models
21. Koedmontree Porntipa, Thanakulwuttiporn Phachara, Wongwian Laksameekarn, Jai-Inta Pruksa et al. (2026-02)
    Development of High-CaO Fly Ash-Based Alkali-Activated Mortar for 3D Printing Technology
22. Oh Gyujong, Oh Sangwoo, Choi Seongcheol (2026-02)
    Carbonated Basic Oxygen Furnace Slag Fine Aggregate in Concrete:
    Laboratory Assessment and Sustainable Application in 3D-Printed Concrete Components
23. Walzer Alexander, Kozlova Mariia, Mohite Ashish, Yeomans Julian et al. (2026-02)
    How to Scale a 3D Concrete Printing Facility?:
    A Stochastic Decision-Support Framework for Production Investment
24. Zhang Wenchang, Liu Chuanqi, Weng Yiwei, Xue Tianju et al. (2026-02)
    A Differentiable Material Point Method Solver for the Modeling, Simulation and Analysis of Extrusion-Flow Process for 3D Concrete Printing
25. Catenacci Matthew, Owens Jeffery, Johnson Glenn, Nikon Charles (2026-02)
    Piston Press Extrusion as a Low-Cost Screening Tool for Cementitious Formulations in 3D Concrete Printing
26. Mahmood Mir, Alias Aizat, Hasan Kamrul (2026-02)
    A Bibliometric and Technical Review of Supplementary Cementitious Materials for 3D Concrete Printing: Research Trends, Current Status, Challenges, and Future Directions
27. Morán-Zabala Jean, Cogollo-Flórez Juan, Gutiérrez-Rôa Derly, Correa-Espinal Alexander (2026-02)
    Design of Experiments-Based Analysis of Operating Parameters in Small-Scale Clay 3D Printing
28. Neef Tobias, Butler Marko, Mechtcherine Viktor (2026-02)
    Methodology for Integrating Mineral-Impregnated Carbon Fibers as Reinforcement in Fine Filament 3D Concrete Printing
29. Zhi Yefan, Ororbia Maximilian, Motavaselian Amir, Chai Hua et al. (2026-02)
    Toolpath Optimization for a Post-Tensioned Concrete 3D-Printed Floor Structure
30. Alessandro Antonella, Sousa Israel, Laflamme Simon, Ubertini Filippo (2026-02)
    Effect of Carbon Fillers and Printing Path Strategy on Damage Detection in 3D-Printed Smart Concretes for Structural Health Monitoring
31. Iozzino Fabio, Fragnito Andrea, Mauro Gerardo, Roselli Carlo (2026-02)
    Preliminary Optimization of Steady-State and Dynamic Thermal Performance of 3D Printed Foamed Concrete
32. Sangiorgio Valentino, Spacone Enrico, Camata Guido, Risi Raffaele et al. (2026-02)
    Seismic Performance of 3D Printed Buildings:
    An Overview of the World-First Full-Scale Shaking Table Test
33. Versteege Jelle, Salet Theo, Wolfs Robert (2026-02)
    Sensory Data Mapping and Database Development for Interlayer Bond Strength:
    Towards Digital Shadows in 3D Concrete Printing
34. Vetrivelan R., Gettu Ravindra, Palaniappan Sivakumar, Kumar Yogesh (2026-02)
    Embodied Carbon, Time and Cost of Two Post-Office Buildings:
    Comparison of 3D Printed Concrete and Conventional Buildings
35. Liu Huawei, Dai Meiling, Liu Chao, Du Hongjian (2026-02)
    Targeted Enhancement Strategy for the Rebar Interface Bond in 3D Printed Coarse Aggregate Concrete: Performance Evaluation and Mechanistic Insights
36. Ma Siqi, Zhang Feng, Fu Shuai, Min Benzhi et al. (2026-02)
    Bioinspired Multilayer Barriers of 3D-Printed Lunar Regolith Simulant-Based Geopolymers for Mechanical and Thermal Protection
37. Mercimek Ömer, Akkaya Sercan, Bıçakçıoğlu Kaan, Çelik Alper et al. (2026-02)
    Diagonal Tension Testing of 3D Printed Concrete Walls:
    Benchmarking Against Conventional Masonry
38. Mirmotalebi Seyedali, Moon Hyosoo, Tesiero Raymond, Noor Sadia (2026-02)
    Comparative Evaluation of Voxel and Mesh Representations for Digital Defect Detection in Construction-Scale Additive Manufacturing.
39. Yu Chaomin, Si Qi, Pan Zhihong, Ding Faxing (2026-02)
    Study on the Anisotropic Mechanical and Durability Properties of 3D-Printed Recycled PVC Concrete
40. Zhang Tong, Wei Jinhui, Chen Meng, Yu Kanghao (2026-02)
    Experimental Characterization and Theoretical Modeling of the Bonding Behavior Between FRP Bars and 3D Printed Strain-Hardening Cementitious Composites
41. Berdini Daniele, Donnini Jacopo, Cognoli Roberto, Galasso Marco et al. (2026-02)
    Influence of Recycled Aggregates on Fresh and Hardened Properties of 3D Printable Concrete Mix
42. Giulivo Gianluca, Menna Costantino (2026-02)
    The Role of Interlayer Interfaces in 3D-Printed Elements:
    A Nonlinear FEM-Based Study
43. Licciardello Lucia, Meillasson Hedwige, Soto Alejandro, Kaufmann Walter (2026-02)
    Direct Tensile Test on Reinforced 3D-Printed Concrete Ties
44. Si Wen, Khan Mehran, McNally Ciaran (2026-02)
    Designing Polypropylene Fiber Reinforcement for 3D Concrete Printing:
    Rheology Control, Thixotropic Recovery and Mechanical Performance
45. Ahmed Nishad, Sarkar Sudipto, Ashraf Warda (2026-02)
    Rheological and Mechanical Properties of Carbon-Negative 3D Printed Mortar Using Functionalized Biochar
46. Gan Qili, Tao Qin, Liu Nana, Ruan Chunfeng et al. (2026-02)
    Comparative Analysis of Compressive Performance Between 3D Printed and Cast-in-Place Cement-Based Materials
47. Liu Bei, Wang Hao, Yin Haibin, Li Yufeng (2026-02)
    Design Method and Mechanical Properties of Construction 3D Printing Infill Structures Inspired by Origami Patterns
48. Mo Jinxu, Lu Han, Ren Fengming, Lai Mianheng et al. (2026-02)
    Impact of Waste Rubber Powder Size and Replacement Ratio on the Compressive Strength Anisotropy and Pore Structure of 3D Printed Concrete
49. Oh Sangwoo, Lee Jinsuk, Choi Seongcheol (2026-02)
    Enhancing the Buildability of CSA Cement/OPC-Blended Mortar in 3D Printing:
    Optimizing CSA Cement and Water Contents Using a Statistical Approach
50. Sun Tianyu, Ren Zhongyuan, Liu Jiarui, Ong Dominic et al. (2026-02)
    Rheology Properties and Future Trend of 3D Printing Concrete:
    State of the Art Review
51. Garshasbi Sajad, Mousavi Seyed, Nazarpour Hadi, Dehestani Mehdi (2026-02)
    Low Carbon Dioxide 3D Printable Concrete:
    Balancing Rheology, Strength and Environmental Impact Using Bentonite and Ground Granulated Blast-Furnace Slag
52. Prakash Pawan, Tripathi Shubham, Zade Nikhil, Shariff Mohammad (2026-02)
    Experimental and Numerical Investigation of Bond and Flexural Behaviour of Additively Manufactured Structural Concrete Beams
53. Rizzieri Giacomo, Lanteri Federico, Ferrara Liberato, Cremonesi Massimiliano (2026-02)
    ShapeGen3DCP:
    A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing
54. Zhang Lianzhi, Li Xiao, Lin Lin, Ren Changzai et al. (2026-02)
    Analytical and Experimental Study on Fluid–Solid Coupling of Variable-Caliber Nozzles for Concrete 3D Printing
55. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2026-02)
    Using 3D Printing for a New Cementitious Composite and Structural Design
56. Dvorkin Leonid, Marchuk Vitaliy (2026-02)
    Construction Mixtures for 3D Printing
57. Dvorkin Leonid, Marchuk Vitaliy (2026-02)
    Modified Ash-Containing Construction Mixtures for 3D Printing
58. Engel Sven, Bielak Jan, Claßen Martin (2026-02)
    Material Efficient CFRP-Reinforced Concrete Floor Slabs
59. García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia, Ulloa-Aguayo Paula, Rocha-Rubilar Aracely et al. (2026-02)
    Development of a Residential Prototype Using 3D-Printed Elements
60. Goel Devansh, Kore Sudarshan, Blanco Ana (2026-02)
    Understanding the Role of Supplementary Cementitious Materials in 3D Printed Concrete
61. Neef Tobias, Wen Yue, Friese Danny, Cherif Chokri et al. (2026-02)
    Digital Fabrication Methods for Carbon Reinforced Shell-Like Concrete Structures
62. Peng Yiming, Unluer Cise (2026-02)
    Thixotropic and Mechanical Behavior of MgO-SiO2 Pastes Incorporating Rice Husk Ash for Extrusion‐Based 3D Printing
63. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhu Chao et al. (2026-02)
    Rheological Rejuvenation and Structural Build-up of 3D Printed Manufactured Sand Concrete via Secondary Mixing Protocol
64. Liu Chao, Ma Ruiyang, Liu Huawei, Dai Meiling et al. (2026-02)
    Shrinkage in Concrete Additive Manufacturing:
    A Critical Review of Mechanisms, Characterization, and Control Strategies
65. Wang Yu, Douba Ala, Rajendran Naveenkumar, Cubillos-Gamez David et al. (2026-02)
    Cellulose Nanofibers and Limestone Filler Enable High-Performance, Sustainable, and Cost-Efficient Printable Concrete
66. Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
    Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
67. Zheng Yuanxun, Li Yate, Xi Xinyue, Sun Zhenghan et al. (2026-02)
    Research on the Regulation of Rheological Properties of 3D Printed Recycled Concrete and Multi-Objective Optimization of Printer Parameters
68. Zhou Wenjuan, Yang Can, He Xiao, Zhou Mingli et al. (2026-02)
    Sustainably 3D-Printing Mortar with Construction Residue Sand:
    Printability, Mechanical Properties, and Microstructural Mechanisms
69. Kocaer Öznur (2026-02)
    Environmental Assessment of Waste-Derived Materials in 3D Concrete Printing and Cast-in-Place Construction Through a BIM-Integrated Multi-Scale Life Cycle Assessment Framework
70. Sun Hou-Qi, Zeng Jun-Jie, Wu Chao-Lan, Zhou Jie-Kai et al. (2026-02)
    In-Process Embedded FRP Grid for Enhanced Flexural Performance of 3D Printed Concrete Plates
71. Lima Andrade Everton, Silva Nunes Ueslei, Souza Paulo, Vieira Nóbrega Ana et al. (2026-02)
    Assessment of Accelerators for 3D-Printed LC3-Based Cementitious Materials
72. Dang Thi, Tran Mien, Nguyen Thi, Nguyen Hoang (2026-02)
    Large Scale 3D Printed Concrete Wall:
    Interlayer Bonding and Shrinkage
73. Dey Dhrutiman, Panda Biranchi, Kole Jagabandhu (2026-02)
    Investigation into the Effect of Full Replacement with Portland Slag Cement and Screened Slag Sand for Development of Sustainable 3D Printed Concrete
74. Li Long, Lu Shuaijie, Singh Amardeep, Hao Lucen et al. (2026-02)
    Improving Buildability and Reducing Carbon Emission of 3D Printed Concrete via CO2 Mixing and Waste Glass Powder:
    A Synergistic Approach
75. Nguyen Vuong, Du Hongjian (2026-02)
    Underwater 3D Concrete Printing:
    Automation Challenges, Process-Material Coupling, and Future Construction Pathways
76. Bang Jin, Ha Seong, Hwang Ju, Ahn Jin-Hee et al. (2026-02)
    Hybrid RC Columns with 3D Printed Formworks:
    A Case Study on Process-Informed Structural Integrity
77. Santhosh S., Raphael Benny, Santhanam Manu (2026-02)
    DELRA:
    A Continuous Print Path Generation Algorithm for Concrete 3D Printing of Lattice Structures
78. Javan Kazem, Chaggar Pooja, Darestani Mariam, Markhali Bijan et al. (2026-02)
    Workability of Geopolymer Concrete and Mortar Materials: A Systematic Review of Influencing Parameters and Optimization for Sustainable Construction Materials
79. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2026-02)
    Buildability Enhancement of 3D Printed Concrete Using Carbonated Water and Partial Replacement of OPC with Reactive MgO
80. Liu Fang, Wang Haiwei, Zheng Xinchao, Hu Xueting et al. (2026-02)
    Study on the Workability and Mechanical Influencing Factors of 3D-Printed Coal Gangue-Fly Ash-Based Geopolymers
81. Tafur Ginette, Rivera Cristhofer, Torres Pablo (2026-02)
    Evaluation of Sustainable 3D Concrete with Partial Replacement of Fine Aggregate by PET and Addition of Coconut Fibers:
    Impact on Construction with the Use of 3D Gantry-Type Printers in Peru
82. Fang Yuan, Zhang Wenyang, Xiao Yuan, Zhang Zuhua et al. (2026-02)
    Enhancing the Printability and Mechanical Strength of 3D-Printed Geopolymers through Li2O-Al2O3-SiO2-H2O System Regulation
83. Hasan Kamrul, Alias Aizat, Hasan Mehedi, Yahaya Fadzil et al. (2026-02)
    Designing 3D-Printed Concrete with Ternary Blended Mortars Incorporating Fly Ash and Silica Fume:
    Effects of Low Water-Binder Ratios on Workability and Strength
84. Mollah Md., Šeta Berin, Spangenberg Jon (2026-02)
    A Virtual 3D Printing Framework for Off-Earth Construction
85. Sun Chang, Chu Zhipeng, Luo Yijing, Li Long et al. (2026-02)
    Shear Performance of Reinforced 3DPM-NM Specimens with Different Interface Locking Designs
86. Tang Boyang, Yan Jiachuan, Lin Yini, Han Xiaoyu et al. (2026-02)
    Failure Mechanism of Reinforced 3D Printed Concrete Arches:
    Transition from Brittle Fracture to Interface Bond-Slip
87. Bassel Abdelshahid, Yasmeen A., Khaled Nassar (2026-02)
    Simulation-Based 3D Concrete Printing Toolpath Optimization Considering Concrete Rheology and Supporting Activities
88. Mandal Romio, Dubey Pawan, Arya Sampurna, Chakraborty Suman et al. (2026-02)
    Recycled Plastic in 3D‐Printed Cementitious Concrete: Current Status and Research Gaps