Duarte José¶

1. Zargar Seyed, Leicht Robert, Wagner Alan, Duarte José et al. (2025-01)
   Beyond Trial and Error:
   Toward Construction-Aware Early Design-Optimization Considering Robotic Capabilities
2. Çapunaman Özgüç, Farrokhsiar Paniz, Bilén Sven, Duarte José et al. (2025-01)
   Vision-Based Sensing and Digital Twin-Technologies in Conformal 3D Concrete Printing:
   Exploring Operational Accuracy, Adaptability, and Scalability, and Investigating Monitoring-Capabilities in Large-Scale Applications
3. Tabassum Nusrat, Duarte José (2024-10)
   Exploring Multi-Directional 3D Printing for Enclosures on Earth and Beyond:
   Sensitivity-Analysis of Buildability
4. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
   Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
5. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Valenzuela-Astudillo Eduardo, Martuffi-Lazo Daniela et al. (2024-09)
   Development of a Generative Design System for 3D Printed Houses in Chile
6. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
   Flexural Strength of 3D Printed Concrete Beams:
   Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
7. Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
   A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
   Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing
8. Baghi Ali, Aminpour Nima, Memari Ali, Bilén Sven et al. (2024-07)
   3D Concrete Printing of Self-Supported Filaments via Entrained Cables:
   Constructing Formwork-Free Spanning Structures
9. Duarte Gonçalo, Brown Nathan, Duarte José (2024-07)
   Workflow for Generating, Simulating, and Optimizing Form and Tool-Path in 3D Concrete Printing of Vaults
10. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
    Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
    A Parametric Numerical Modeling Approach
11. Duarte Gonçalo, Duarte José, Watson Nathan, Bilén Sven et al. (2024-04)
    Advancing 3D Concrete Printing for Extreme Environments:
    A Focus on Alaska
12. Alhussain Ali, Duarte José, Brown Nathan (2024-02)
    Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing
13. Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
    Advancing 3D Concrete Printing for Affordable Housing:
    A Shape Grammar-Based Approach to Print Spanning-Roof Structures
14. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2023-07)
    Design-Optimization Workflow for 3D Concrete Printing of Spanning Structures
15. Duarte José, Duarte Gonçalo, Brown Nathan, Nazarian Shadi et al. (2023-07)
    Designing a Habitat for 3D Concrete Printing in Permafrost-Regions
16. Hojati Maryam, Memari Ali, Zahabi Mehrzad, Wu Zhengyu et al. (2022-06)
    Barbed-Wire Reinforcement for 3D Concrete Printing
17. Muthumanickam Naveen, Duarte José, Nazarian Shadi, Bilén Sven (2022-04)
    Metamodels for Rapid Analysis of Large Sets of Building Designs for Robotic Constructability:
    Technology Demonstration Using the NASA 3D Printed Mars Habitat Challenge
18. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2022-04)
    A Grammar-Based Algorithm for Tool-Path-Generation:
    Compensating for Material-Deformation in the Additive Manufacturing of Concrete
19. Meisel Nicholas, Watson Nathan, Bilén Sven, Duarte José et al. (2022-02)
    Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic-Arm-Deposition
20. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
    3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
    Mixture Design and Mechanical Properties
21. Wu Zhengyu, Memari Ali, Duarte José (2022-01)
    State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete
22. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
    Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
23. Duarte Gonçalo, Brown Nathan, Memari Ali, Duarte José (2021-07)
    Learning from Historical Structures under Compression for Concrete 3D Printing Construction
24. Craveiro Flávio, Bártolo Helena, Duarte José, Bartolo Paulo (2020-10)
    A Multi-Material Extrusion-Nozzle for Functionally-Graded Concrete Printing
25. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2020-10)
    Experimental Prediction of Material-Deformation in Large-Scale Additive Manufacturing of Concrete
26. Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
    Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
    A Review
27. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2020-03)
    An Overview of the Execution of 3D Printed Sub-Scale Habitat on Mars:
    A Case Study to Exemplify the Automated Construction Process
28. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
    Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
29. Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
    An Automated System for 3D Printing Functionally Graded Concrete-Based Materials
30. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2019-11)
    Additive Manufacturing of Architectural Structures:
    An Interplay Between Materials, Systems, and Design
31. Watson Nathan, Meisel Nicholas, Bilén Sven, Duarte José et al. (2019-08)
    Large-Scale Additive Manufacturing of Concrete Using a Six-Axis Robotic Arm for Autonomous Habitat Construction
32. Craveiro Flávio, Duarte José, Bártolo Helena, Bartolo Paulo (2019-04)
    Additive Manufacturing as an Enabling Technology for Digital Construction:
    A Perspective on Construction 4.0
33. Ashrafi Negar, Duarte José, Nazarian Shadi, Meisel Nicholas (2018-10)
    Evaluating the Relationship Between Deposition and Layer-Quality in Large-Scale Additive Manufacturing of Concrete
34. Duarte José, Nazarian Shadi, Ashrafi Negar (2018-09)
    Designing Shelters for 3D Printing:
    A Studio Experiment
35. Hojati Maryam, Nazarian Shadi, Duarte José, Radlińska Aleksandra et al. (2018-04)
    3D Printing of Concrete:
    A Continuous Exploration of Mix-Design and Printing-Process
36. Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
    A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing