Wolfs Robert¶

1. Rizzieri Giacomo, Bos Derk, Wolfs Robert, Ferrara Liberato et al. (2026-04)
   A Unified Fluid-Solid Elasto-Viscoplastic Finite Element Model for the Simulation of 3D Concrete Printing Across Process Scales
2. Bos Derk, Deetman Arjen, Wolfs Robert (2026-04)
   Correlating in-Line Sensor Data to Hardened State Material Properties in Digital Fabrication with Concrete
3. Rehman Saif, Robens-Radermacher Annika, Unger Jörg, Wolfs Robert (2026-03)
   Assessing Structural Failure in Extrusion-Based 3D Concrete Printing Using a Plasticity Model with Non-Linear Hardening
4. Versteege Jelle, Salet Theo, Wolfs Robert (2026-02)
   Sensory Data Mapping and Database Development for Interlayer Bond Strength:
   Towards Digital Shadows in 3D Concrete Printing
5. Deetman Arjen, Bos Derk, Lucas Sandra, Salet Theo et al. (2025-12)
   A Database Framework for 3D Concrete Printing
6. Gümrük Idil, Schröder Torsten, Wolfs Robert, Salet Theo (2025-11)
   3DCP-CI:
   Developing a Circularity Indicator for Assessing 3DConcrete Printed Architectural Designs
7. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Approach and Main Results:
   Mechanical Properties of 3D Printed Concrete
8. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Compressive Strength and Modulus of Elasticity:
   Mechanical Properties of 3D Printed Concrete
9. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
   Flexural and Tensile Strength:
   Mechanical Properties of 3D Printed Concrete
10. Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part II: Moisture and Heat
11. Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part I: Geometry
12. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
    Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
13. Wolfs Robert (2024-09)
    The Status Quo of 3D Concrete Printing:
    Are We There Yet?
14. Bos Derk, Lucas Sandra, Blaakmeer Jan, Salet Theo et al. (2024-09)
    Development of the On-Line Gravity-Induced Compression-Test:
    The Inverse-Slugs-Test
15. Gümrük Idil, Wolfs Robert, Schröder Torsten, Salet Theo (2024-09)
    Circular Design-Strategies for 3D Concrete Printing in the Built Environment
16. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
    A Data-Driven View on Digital Fabrication with Concrete:
    The Case of Inter-Layer Bond Strength
17. Wolfs Robert, Gümrük Idil, Driessen Saar, Ferguson Matthew et al. (2024-09)
    3D Concrete Printing and Circularity:
    Designing, Testing, and Modelling Dry Joints for Structural Applications
18. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
    On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
19. Bos Derk, Wolfs Robert (2023-12)
    A Quality-Control Framework for Digital Fabrication with Concrete
20. Wolfs Robert, Bos Derk, Salet Theo (2023-06)
    Lessons Learned of Project Milestone:
    The First 3D Printed Concrete House in the Netherlands
21. Bos Derk, Wolfs Robert (2022-06)
    Automated Visual Inspection of Near-Nozzle Droplet-Formation for Quality-Control of Additive Manufacturing
22. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
23. Bos Freek, Menna Costantino, Pradena Mauricio, Kreiger Eric et al. (2022-03)
    The Realities of Additively Manufactured Concrete Structures in Practice
24. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
25. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
26. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
    A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
    The Case of a 29m Bridge in the Netherlands
27. Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
    Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
    The Good, the Bad and the Ugly
28. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
29. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
    Integrating Reinforcement in Digital Fabrication with Concrete:
    A Review and Classification Framework
30. Buswell Richard, Kinnell Peter, Xu Jie, Hack Norman et al. (2020-07)
    Inspection Methods for 3D Concrete Printing
31. Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
    Elastic Buckling and Plastic Collapse During 3D Concrete Printing
32. Bos Freek, Wolfs Robert, Salet Theo (2020-06)
    CCR Digital Concrete 2020 SI:
    Editorial
33. Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
    Numerical Simulations of Concrete Processing:
    From Standard Formative Casting to Additive Manufacturing
34. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
35. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
    The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
36. Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
    Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials
37. Wolfs Robert, Suiker Akke (2019-06)
    Structural Failure During Extrusion-Based 3D Printing Processes
38. Wolfs Robert, Bos Freek, Salet Theo (2019-06)
    Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing
39. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
    Hardened Properties of 3D Printed Concrete:
    The Influence of Process Parameters on Inter-Layer Adhesion
40. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2018-09)
    Large-Scale Testing of Digitally Fabricated Concrete (DFC) Elements
41. Borg Costanzi Christopher, Ahmed Zeeshan, Schipper Roel, Bos Freek et al. (2018-07)
    3D Printing Concrete on Temporary Surfaces:
    The Design and Fabrication of a Concrete Shell Structure
42. Wolfs Robert, Bos Freek, Salet Theo (2018-06)
    Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete
43. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
    Early-Age Mechanical Behaviour of 3D Printed Concrete:
    Numerical Modelling and Experimental Testing
44. Coenders Jeroen, Mathot Maarten, Martens Pascal, Bos Freek et al. (2017-12)
    Optimizing 3D Concrete Printing:
    Exploring Potentials and Limitations of Materials and Production
45. Schipper Roel, Borg Costanzi Christopher, Bos Freek, Ahmed Zeeshan et al. (2017-12)
    Double Curved Concrete Printing:
    Printing on Non-Planar Surfaces
46. Bos Freek, Ahmed Zeeshan, Wolfs Robert, Salet Theo (2017-06)
    3D Printing Concrete with Reinforcement
47. Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
    3D Concrete Printing:
    A Structural Engineering Perspective
48. Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
    A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
49. Ahmed Zeeshan, Bos Freek, Wolfs Robert, Salet Theo (2016-11)
    Design Considerations Due to Scale Effects in 3D Concrete Printing
50. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
    Additive Manufacturing of Concrete in Construction:
    Potentials and Challenges of 3D Concrete Printing
51. Wolfs Robert, Salet Theo, Hendricks Berry (2015-08)
    3D Printing of Sustainable Concrete Structures