Caron Jean-François¶

1. Caneda-Martínez Laura, Hassan M., Demont Léo, Keita Emmanuel et al. (2026-01)
   Fast Penetration Testing of Printable Concretes with a Portable Device:
   Robustness and Calibration
2. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
   Multiphysics Modelling of 3D Concrete Printing:
   From Material Model to Process Simulation and Optimisation
3. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Compressive Strength and Modulus of Elasticity:
   Mechanical Properties of 3D Printed Concrete
4. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
   Flexural and Tensile Strength:
   Mechanical Properties of 3D Printed Concrete
5. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-04)
   Multiphysics Modelling for 3D Concrete Printing:
   From Printability to Hardened Properties
6. Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2025-03)
   Multi-Objective Optimization of a Sustainable LC3 Mortar for 3D Printing
7. Caron Jean-François, Ducoulombier Nicolas, Demont Léo (2025-01)
   Reinforcement of Printed Structures
8. Jin Willy, Caron Jean-François, Ouellet-Plamondon Claudiane (2024-11)
   Minimizing the Carbon Footprint of 3D Printing Concrete:
   Leveraging Parametric LCA and Neural Networks Through Multi-Objective-Optimization
9. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
   Anisotropic Concrete:
   A Composite Look on the Engineering and Architecture of Concrete Construction
10. Bono Victor, Ducoulombier Nicolas, Loulha Sarena, Mesnil Romain et al. (2024-11)
    Toward 3D Printable Low-Carbon Mortar:
    Method and Application
11. Jin Willy, Roux Charlotte, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
    Life Cycle Assessment of Limestone-Calcined-Clay-Concrete:
    Potential for Low-Carbon 3D Printing
12. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
    Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
13. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
    Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
    Strategies for Rheology Adjustment and Mechanical Performance Estimation
14. Demont Léo, Mesnil Romain, Caron Jean-François (2024-09)
    Structuration-Rate-Measurement Using a Digital Pocket Vane
15. Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
    Multi-Objective-Optimization of a Sustainable Ternary Mortar for 3D Printing
16. Mesnil Romain, Sarkis Rosa Pedro, Caron Jean-François (2024-09)
    Thickness-Optimization of 3D Printed Structures Considering Structural Failure
17. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2024-09)
    Multi-Physics Modelling for Extrusion-Based 3D Printing:
    Material, Process and Applications
18. Viano Rafaël, Margerit Pierre, Mesnil Romain, Weisz-Patrault Daniel et al. (2024-09)
    Shrinkage Characterization and Compensation for 3DPC
19. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
20. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
    On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
21. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
    Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
22. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2024-06)
    Reinvent Reinforced Concrete with Robotics and 3D Printing
23. Roux Charlotte, Archez Julien, Gall Corentin, Saadé Myriam et al. (2024-04)
    Towards Sustainable Material:
    Optimizing Geopolymer Mortar Formulations for 3D Printing
24. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2023-12)
    Methodology for Formulating Low-Carbon Printable Mortar Through Particles-Packing-Optimization
25. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
    Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
26. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2023-10)
    3D Printing of Continuous-Fibers Cementitious Composites:
    Anisotropic 3D Mortar
27. Demont Léo, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2023-10)
    Affordable In-Line Structuration Measurements of Printable Mortar with a Pocket-Shear-Vane
28. Mesnil Romain, Poussard Valentin, Sab Karam, Caron Jean-François (2022-11)
    On the Geometrical Origin of the Anisotropy in Extrusion-Based 3D Printed Structures
29. García Rodrigo, Dokladalova Eva, Dokládal Petr, Caron Jean-François et al. (2022-09)
    In-Line Monitoring of 3D Concrete Printing Using Computer-Vision
30. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
    Flow-Based Pultrusion of Anisotropic Concrete:
    Mechanical Properties at Hardened State
31. Caron Jean-François, Demont Léo, Ducoulombier Nicolas, Mesnil Romain (2021-06)
    3D Printing of Mortar with Continuous Fibers:
    Principle, Properties and Potential for Application
32. Ducoulombier Nicolas, Mesnil Romain, Carneau Paul, Demont Léo et al. (2021-05)
    The “Slugs-Test” for Extrusion-Based Additive Manufacturing:
    Protocol, Analysis and Practical Limits
33. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
    Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
34. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
    Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
    Rheological and Technological Requirements
35. Archez Julien, Texier-Mandoki N., Bourbon X., Caron Jean-François et al. (2020-08)
    Adaptation of the Geopolymer Composite Formulation Binder to the Shaping Process
36. Duballet Romain, Mesnil Romain, Ducoulombier Nicolas, Carneau Paul et al. (2020-07)
    Free Deposition-Printing for Space-Truss-Structures
37. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
38. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
    Sustainable Reinforced Concrete Beams:
    Mechanical Optimization and 3D Printed Formwork
39. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
    Additive Manufacturing of Anisotropic Concrete:
    A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix