Mesnil Romain¶

1. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2026-02)
   Using 3D Printing for a New Cementitious Composite and Structural Design
2. Caneda-Martínez Laura, Hassan M., Demont Léo, Keita Emmanuel et al. (2026-01)
   Fast Penetration Testing of Printable Concretes with a Portable Device:
   Robustness and Calibration
3. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
   Multiphysics Modelling of 3D Concrete Printing:
   From Material Model to Process Simulation and Optimisation
4. Gribonval Alice, Pierre Maxime, Ducoulombier Nicolas, Sab Karam et al. (2025-05)
   Multi-Physics Modelling of 3D-Printed Concrete Evolution in Environmental Conditions
5. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-04)
   Multiphysics Modelling for 3D Concrete Printing:
   From Printability to Hardened Properties
6. Mesnil Romain, Rosa Pedro, Demont Léo (2025-03)
   Thickness Optimisation in 3D Printed Concrete Structures
7. Mesnil Romain, Duballet Romain, Baverel Olivier (2025-01)
   Structural Applications of 3D Printing
8. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
   Anisotropic Concrete:
   A Composite Look on the Engineering and Architecture of Concrete Construction
9. Bono Victor, Ducoulombier Nicolas, Loulha Sarena, Mesnil Romain et al. (2024-11)
   Toward 3D Printable Low-Carbon Mortar:
   Method and Application
10. Motamedi Mahan, Mesnil Romain, Tang Anh-Minh, Pereira Jean-Michel et al. (2024-11)
    Structural Build-Up of 3D Printed Earth by Drying
11. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
    Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
12. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
    Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
    Strategies for Rheology Adjustment and Mechanical Performance Estimation
13. Demont Léo, Mesnil Romain, Caron Jean-François (2024-09)
    Structuration-Rate-Measurement Using a Digital Pocket Vane
14. Mesnil Romain, Sarkis Rosa Pedro, Caron Jean-François (2024-09)
    Thickness-Optimization of 3D Printed Structures Considering Structural Failure
15. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2024-09)
    Multi-Physics Modelling for Extrusion-Based 3D Printing:
    Material, Process and Applications
16. Viano Rafaël, Margerit Pierre, Mesnil Romain, Weisz-Patrault Daniel et al. (2024-09)
    Shrinkage Characterization and Compensation for 3DPC
17. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
18. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
    On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
19. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
    Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
20. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2024-06)
    Reinvent Reinforced Concrete with Robotics and 3D Printing
21. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2023-12)
    Methodology for Formulating Low-Carbon Printable Mortar Through Particles-Packing-Optimization
22. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
    Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
23. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2023-10)
    3D Printing of Continuous-Fibers Cementitious Composites:
    Anisotropic 3D Mortar
24. Demont Léo, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2023-10)
    Affordable In-Line Structuration Measurements of Printable Mortar with a Pocket-Shear-Vane
25. Roux Charlotte, Kuzmenko Kateryna, Roussel Nicolas, Mesnil Romain et al. (2022-11)
    Life Cycle Assessment of a Concrete 3D Printing Process
26. Mesnil Romain, Poussard Valentin, Sab Karam, Caron Jean-François (2022-11)
    On the Geometrical Origin of the Anisotropy in Extrusion-Based 3D Printed Structures
27. García Rodrigo, Dokladalova Eva, Dokládal Petr, Caron Jean-François et al. (2022-09)
    In-Line Monitoring of 3D Concrete Printing Using Computer-Vision
28. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
    Flow-Based Pultrusion of Anisotropic Concrete:
    Mechanical Properties at Hardened State
29. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
30. Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
    Layer Pressing in Concrete Extrusion-Based 3D Printing:
    Experiments and Analysis
31. Caron Jean-François, Demont Léo, Ducoulombier Nicolas, Mesnil Romain (2021-06)
    3D Printing of Mortar with Continuous Fibers:
    Principle, Properties and Potential for Application
32. Ducoulombier Nicolas, Mesnil Romain, Carneau Paul, Demont Léo et al. (2021-05)
    The “Slugs-Test” for Extrusion-Based Additive Manufacturing:
    Protocol, Analysis and Practical Limits
33. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
    Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
34. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
    Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
    Rheological and Technological Requirements
35. Carneau Paul, Mesnil Romain, Ducoulombier Nicolas, Roussel Nicolas et al. (2020-07)
    Characterisation of the Layer-Pressing-Strategy for Concrete 3D Printing
36. Duballet Romain, Mesnil Romain, Ducoulombier Nicolas, Carneau Paul et al. (2020-07)
    Free Deposition-Printing for Space-Truss-Structures
37. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
38. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
    Sustainable Reinforced Concrete Beams:
    Mechanical Optimization and 3D Printed Formwork
39. Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2020-04)
    Additive Manufacturing of Cantilever:
    From Masonry to Concrete 3D Printing
40. Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2019-10)
    An Exploration of 3D Printing Design Space Inspired by Masonry