Skip to content

2022-09

  1. Rensburg Johannes, Babafemi Adewumi, Combrinck Riaan (2022-09)
    A Textile Reinforcement Method for 3D Printed Concrete
  2. García Rodrigo, Dokladalova Eva, Dokládal Petr, Caron Jean-François et al. (2022-09)
    In-Line Monitoring of 3D Concrete Printing Using Computer-Vision
  3. Kalthoff Matthias, Raupach Michael, Matschei Thomas (2022-09)
    Investigation of Rheological Test-Methods for the Suitability of Mortars for Manufacturing of Textile-Reinforced Concrete Using a Laboratory Mortar-Extruder:
    LabMorTex
  4. Bhooshan Shajay, Bhooshan Vishu, Megens Johannes, Casucci Tommaso et al. (2022-09)
    Print-Path Design for Inclined-Plane Robotic 3D Printing of Unreinforced Concrete
  5. Hansemann Georg, Holzinger Christoph, Schmid Robert, Tapley Joshua et al. (2022-09)
    Lightweight Reinforced Concrete Slab
  6. Machovec Jan, Štádler Marek, Kamenický Josef, Reiterman Pavel (2022-09)
    Mechanical Properties of Concrete Lintel Produced by 3D Printing
  7. Mehdizadeh Samim, Zimmermann Adrian, Tessmann Oliver (2022-09)
    RotoColumn:
    A Continuous Digital Fabrication Framework for Casting Large-Scale Linear Concrete Hollow Elements
  8. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
    Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
  9. Ivanova Irina, Mechtcherine Viktor, Reißig Silvia (2022-09)
    Vergleich von Bewertungsmethoden für die rheologischen Eigenschaften von frisch gedrucktem Beton
  10. Liu Bing, Liu Xiaoyan, Li Guangtao, Geng Songyuan et al. (2022-09)
    Study on Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete Using Destructive and Non-Destructive Testing Methods
  11. Markin Slava, Mechtcherine Viktor (2022-09)
    Rissbildung in 3D gedruckten Betonelementen infolge plastischen Schwindens:
    Ursachen und Quantifizierungsmethoden
  12. Mechtcherine Viktor (2022-09)
    Additive Fertigung mit Beton
  13. Neef Tobias, Mechtcherine Viktor (2022-09)
    Additiv gefertigter Carbonbeton mit mineralischer Tränkung der Garne
  14. Taubert Markus, Mechtcherine Viktor (2022-09)
    3D druckbarer Normalbeton mit grober Gesteinskörnung
  15. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-09)
    Method of Formulating 3D Printable Strain-Hardening Alkali-Activated Composites for Additive Construction
  16. Nuh Mishael, Oval Robin, Orr John, Shepherd Paul (2022-09)
    Digital Fabrication of Ribbed Concrete Shells Using Automated Robotic Concrete Spraying
  17. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Vanags Andris et al. (2022-09)
    The Effects of Air-Entraining Agent on Fresh and Hardened Properties of 3D Concrete
  18. Dulaj Albanela, Salet Theo, Lucas Sandra (2022-09)
    Mechanical Properties and Self-Sensing Ability of Graphene-Mortar Compositions with Different Water-Content for 3D Printing Applications
  19. Hass Lauri, Bos Freek, Salet Theo (2022-09)
    Characterizing the Bond Properties of Automatically Placed Helical Reinforcement in 3D Printed Concrete
  20. Liu Junli, Tran Jonathan (2022-09)
    Experimental Study on 3D-Printed Cementitious Materials Containing Surface-Modified Recycled Crumb-Rubber
  21. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
  22. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2022-09)
    Optimization of Building Floor Beam Layout by Optimization Algorithms Regarding the Concrete Printing Techniques
  23. Ma Jiaming, Gomaa Mohamed, Bao Ding, Javan Anooshe et al. (2022-09)
    Print Nervi:
    Design and Construction of a Ribbed Floor System in the Digital Era
  24. Weiner G., Wurst G., Lessmeister T., Sherizadeh T. et al. (2022-09)
    Triangulating Impact Location in 3D Printable Concrete Using Fiber Bragg Grating Sensors
  25. Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
    Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design
  26. Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2022-09)
    Aerial Additive Manufacturing with Multiple Autonomous Robots
  27. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
  28. Zhao Yanhua, Meng Wei, Wang Peifu, Qian Dongqing et al. (2022-09)
    Research-Progress of Concrete 3D Printing Technology and Its Equipment System, Material, and Molding-Defect-Control
  29. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-09)
    3D Printing Effect on the Compressive Strength of Concrete Structures
  30. Kloft Harald, Dörfler Kathrin, Bährens Meike, Dielemans Gido et al. (2022-09)
    The Research Infrastructure of the SFB TRR 277 AMC:
    Additive Manufacturing in Construction
  31. Mortada Youssef, Mohammad Malek, Mansoor Bilal, Grasley Zachary et al. (2022-09)
    Development of Test-Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing
  32. Šinka Māris, Spuriņa Ella, Korjakins Aleksandrs, Bajāre Diāna (2022-09)
    Hempcrete:
    CO2 Neutral Wall Solutions for 3D Printing
  33. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
    Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
  34. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2022-09)
    Spray-Based 3D Concrete Printing with Calcium and Polymeric Additives:
    A Feasibility Study
  35. Naboni Roberto, Breseghello Luca, Sanin Sandro (2022-09)
    Environment-Aware 3D Concrete Printing through Robot-Vision
  36. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
    Rheology and Printability of Portland-Cement-Based Materials:
    A Review
  37. Lamnini Soukaina, Elsayed Hamada, Lakhdar Yazid, Baino Francesco et al. (2022-09)
    Robocasting of Advanced Ceramics:
    Ink-Optimization and Protocol to Predict the Printing Parameters
  38. Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
    3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone
  39. Ren Chuangnan, Gao Baobin, Geng Chenhui, Zhu Wenjie (2022-09)
    Assembled Design and Compressive Performance Simulation of Mine Waterproof Wall Based on Concrete 3D Printing
  40. Medicis Carolina, Gonzalez Sergio, Alvarado Yezid, Vacca Hermes et al. (2022-09)
    Mechanical Performance of Commercially Available Premix UHPC-Based 3D Printable Concrete
  41. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
    Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
  42. Puzatova (nee Sharanova) Anastasiia, Sokolnikova S., Dmitrieva Maria (2022-09)
    Polymer-Cement Concrete Based on Polyvinyl-Acetate Dispersion for Construction 3D Printing
  43. Qian Hao, Hua Sudong, Yue Hongfei, Feng Guiyang et al. (2022-09)
    Utilization of Recycled Construction-Powder in 3D Concrete Printable Materials through Particle-Packing-Optimization
  44. Solonina Valentina, Surovtsev I., Butakova M. (2022-09)
    Optimizing the Structure of Construction Mixes for 3D Printing
  45. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
    Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
  46. Zhang Yuanyuan, Pan Pan, Li Wenqiang, Dong Biqin et al. (2022-09)
    Freeform Embedded Printing of Vasculature in Cementitious Materials for Healing-Agent Transport
  47. Wu Yun-Chen, Li Mo (2022-09)
    Effects of Early-Age Rheology and Printing Time Interval on Late-Age Fracture Characteristics of 3D Printed Concrete
  48. Abstoß Marvin, Rudolph Enrico, Funke Henrik, Gelbrich Sandra (2022-09)
    Near-Net-Shape-Extrusion and Milling of Complex Concrete Elements for the Production of Moulds
  49. Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
    The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
  50. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2022-09)
    Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing
  51. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
    Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
  52. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2022-09)
    Rheological and Strength-Characterisation of Limestone-Calcined-Clay-Cement 3D Printed Concrete
  53. Ivaniuk Egor, Tošić Zlata, Eichenauer Martin, Müller Steffen et al. (2022-09)
    Automated Production of Textile Reinforced Concrete Modules for the Assembly of Shell Structures
  54. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
    Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
  55. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
    A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
  56. Licciardello Lucia, Reggia Adriano, Metelli Giovanni, Plizzari Giovanni (2022-09)
    Investigation of the Inter-Layer Strength of 3D Printed Concrete Shear Walls
  57. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
    Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
  58. Marcucci Andrea, Ferrara Liberato (2022-09)
    Artificial Neural Networks and Fuzzy Logic Applied to Concrete Rheology for the Study of Printability
  59. Meschke Günther, Neu Gerrit, Gudžulić Vladislav, Reinold Janis et al. (2022-09)
    Computational Modeling of FRC:
    From 3D Printing to Robust Design
  60. Park Ji-seul, Jeong Seung-Su, Hong Sung-Gul (2022-09)
    Numerical Analysis on Stability of Cylindrical Structures in 3D Printing Process
  61. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2022-09)
    A Numerical Model of 3D Concrete Printing
  62. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2022-09)
    Topology-Optimization of Structural Beam Systems considering 3D Concrete Printing Technology-Constraints
  63. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-09)
    Characterization of 3D Printed Concrete Beams After Exposure to High Temperature
  64. He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
    Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
    An Experimental and Theoretical Investigation
  65. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
    3D Printing Concrete with Recycled Coarse Aggregates:
    The Influence of Pore-Structure on Inter-Layer Adhesion
  66. Marczyk Joanna, Ziejewska Celina, Korniejenko Kinga, Łach Michał et al. (2022-09)
    Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving
  67. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Hebert Marc et al. (2022-09)
    Studying Steel-Fiber-Reinforcement for 3D Printed Elements and Structures
  68. Game Daniel, Giwa Ilerioluwa, Ahmed Hassan, Noorvand Hassan et al. (2022-09)
    Development of Ultra-High-Performance Engineered Cementitious Composites for 3D Printing Applications
  69. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
    Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
  70. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
    Toward 3D Printable Engineered Cementitious Composites:
    Mix-Design Proportioning, Flowability, and Mechanical Performance
  71. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
    Robotic On-Site Adaptive Thin-Layer Printing:
    Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
  72. Pott Ursula, Wolf Christoph, Petryna Yuri, Stephan Dietmar (2022-09)
    Evaluation of the Unconfined Uniaxial Compression-Test to Study the Evolution of Apparent Printable Mortar-Properties During the Early-Age Transition-Regime