Tao Yaxin¶

1. Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
   3D Printed Concrete with Recycled Coarse Aggregate:
   Freeze-Thaw Resistance Assessment and Damage Mechanisms
2. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
   Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
3. Cui Weijiu, Guo Ruyi, Liu Wenliang, Da Wan et al. (2025-07)
   Quality Assessment of 3D‐Printed Concrete Through Quantitative Visual Inspection
4. Cui Weijiu, Ji Dongsheng, Shen Liang, Su Shiyong et al. (2025-06)
   A Neural Network-Based Model for Assessing 3D Printable Concrete Performance in Robotic Fabrication
5. Tao Yaxin, Yuan Yong, Zhang Yi, Wangler Timothy (2025-06)
   Pore Structure Analysis of Printcrete Under Varying Temperature
6. Zuo Zibo, Huang Yulin, Tao Yaxin, Yong Yuan et al. (2025-06)
   Analysis of Factors Influencing the Maximum Continuous Printing Height of 3D Printed Concrete
7. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
   A (P)Review:
   Adhesion of Printcrete for Tunnel Structures
8. Tao Yaxin, Zhang Yi, Mohan Manu, Dai Xiaodi et al. (2025-05)
   Waste-Derived Aggregates in 3D Printable Concrete:
   Current Insights and Future Perspectives
9. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
   Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
10. Zhang Bo, Tao Yaxin, Zhang Yi, Shields Yasmina et al. (2025-05)
    Mechanical Properties of 3D Printed Concrete with 2D Infill Patterns Including Print Path Crossings
11. Zuo Zibo, Tao Yaxin, Huang Yulin, Zhang Longlong et al. (2025-04)
    Real-Time Temperature Monitoring to Evaluate the Strength Evolution of 3D Printed Concrete:
    From Lab to In-Situ Printing
12. Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
    Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
    A Case Study of a Full-Size Two-Story Building
13. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
    Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
14. Cui Weijiu, Liu Wenliang, Guo Ruyi, Da Wan et al. (2025-02)
    Geometrical Quality Inspection in 3D Concrete Printing Using AI-Assisted Computer Vision
15. Zuo Zibo, Tao Yaxin, Corte Wouter (2024-12)
    Experimental Research of Concrete Temperature-Distribution During Large-Scale On-Site 3D Printing Based on Infrared-Thermal-Imaging
16. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
    Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
17. Sun Yubo, Zhang Xinyue, Zhou Jiangang, Wang Yilin et al. (2024-11)
    Extrudability-Analysis of 3D Printable Concrete as a Two-Phase Discrete Flow
18. Mohan Manu, Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-09)
    Influence of Temperature Variations on the Performance of Two-Component 3D Printable Mixtures
19. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
    Static Mixing for Set-on-Demand of Digital Concrete
20. Zhang Yi, Tittelboom Kim, Tao Yaxin, Zhang Yiyuan et al. (2024-09)
    Understanding Carbonation in 3D Printed Cement-Based Materials with Exposed Bottom Surface
21. Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
    Aluminate 2K Systems in Digital Concrete:
    Process, Design, Chemistry, and Outlook
22. Dai Xiaodi, Tao Yaxin, Zhang Yi, Ding Luchuan et al. (2024-08)
    Development of 3D Printable Alkali-Activated Slag-Metakaolin Concrete
23. Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-07)
    CFD Simulation of Twin-Pipe Pumping Process for 3D Concrete Printing
24. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
    Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
25. Cui Weijiu, Shen Liang, Ji Dongsheng, Liu Wenliang et al. (2024-07)
    Mechanical Performance and Permeability of Low-Carbon Printable Concrete
26. Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
    Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
27. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
    Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures
28. Yuan Yong, Wang Xiaoyun, Zhang Jiao-Long, Tao Yaxin et al. (2024-05)
    The Shear Strength of the Interface Between Artificial Rock and Printed Concrete at Super Early-Ages
29. Tao Yaxin, Yuan Yong (2024-05)
    3D Concrete Printing for Tunnel Linings:
    Opportunities and Challenges
30. Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
    Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
31. Zhang Yiyuan, Tao Yaxin, Zhang Yi, Tittelboom Kim et al. (2024-04)
    Up-Scaling Active Rheology-Control to Cement-Mortar with the Intervention of an In-Line Magnetic Field
32. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
33. Sun Yubo, Mohan Manu, Tao Yaxin, Zhang Yi et al. (2024-02)
    A Conceptual Design of Two-Stream Alkali-Activated Materials
34. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2024-02)
    Hydration and Microstructure of Calcium-Sulfoaluminate-Portland-Cement Binder Systems for Set-on-Demand Applications
35. Tao Yaxin, Zhang Yi, Schutter Geert, Tittelboom Kim (2024-01)
    Interfacial Bonding of 3D Printable Concrete with Chemically Reactive Coating for Automatic Repair
36. Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
    Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
37. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-10)
    Influence of Rheology on Mixing Homogeneity and Mechanical Behavior of Twin-Pipe 3D Printable Concrete
38. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2023-06)
    Set-on-Demand of Alkali-Activated Slag Mixture Using Twin-Pipe Pumping
39. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
    Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
40. Tao Yaxin, Lesage Karel, Schutter Geert, Tittelboom Kim (2023-04)
    Adhesion Studies in View of Automated Repair Using 3D Concrete Printing
41. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
    Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
    From Transportation to Fabrication
42. Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
    Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay
43. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
    Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
    Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
44. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
    Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing
45. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
    Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
46. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
    Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
47. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
48. Ooms Ticho, Vantyghem Gieljan, Tao Yaxin, Bekaert Michiel et al. (2022-06)
    The Production of a Topology-Optimized 3D Printed Concrete Bridge
49. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2022-06)
    Using Limestone-Powder as a Carrier for the Accelerator in Extrusion-Based 3D Concrete Printing
50. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
    Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
    An Application in Extrusion-Based Concrete 3D Printing
51. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
    Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
52. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
    Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
53. Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
    Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings
54. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
55. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2020-07)
    Effect of Limestone-Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
56. Yuan Yong, Tao Yaxin (2018-03)
    Mixing and Extrusion of Printing Concrete