Skip to content

2023-02

  1. Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
    Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay
  2. Jesus Manuel, Guimarães Ana, Rangel Bárbara, Alves Jorge (2023-02)
    The Potential of 3D Printing in Building Pathology:
    Rehabilitation of Cultural Heritage
  3. Wang Dianchao, Xiao Jianzhuang, Sun Bochao, Zhang Shipeng et al. (2023-02)
    Mechanical Properties of 3D Printed Mortar Cured by CO2
  4. Geng Songyuan, Luo Qiling, Liu Kun, Li Yunchao et al. (2023-02)
    Research Status and Prospect of Machine Learning in Construction 3D Printing
  5. Prasad Kudrekodlu, Vasugi V., Senthil Kumaran G. (2023-02)
    Application of 3D Printing Concepts in the Architecture Engineering and Construction Industry:
    A Scientometric Review
  6. Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
    Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties
  7. Liu Chao, Wang Zhihui, Wu Yiwen, Liu Huawei et al. (2023-02)
    3D Printing Concrete with Recycled Sand:
    The Influence Mechanism of Extruded Pore-Defects on Constitutive Relationship
  8. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
    Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
    Systematic Evaluation and Optimization of Printability and Printing Quality
  9. Pan Zuanfeng, Si Doudou, Tao Jinghong, Xiao Jianzhuang (2023-02)
    Compressive Behavior of 3D Printed Concrete with Different Printing Paths and Concrete Ages
  10. Chen Yu, Liang Minfei, Zhang Yu, Li Zhenming et al. (2023-02)
    Can Superabsorbent Polymers Be Used as Rheology-Modifiers for Cementitious Materials in the Context of 3D Concrete Printing
  11. Madrid Javier, Ortega Guillermo, Gorostiza Carabaño Javier, Olsson Nils et al. (2023-02)
    3D Claying:
    3D Printing and Recycling Clay
  12. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
    Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
    Experimental and Numerical Studies
  13. Waqar Ahsan, Othman Idris, Pomares Juan (2023-02)
    Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling
  14. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei (2023-02)
    Effects of the Distribution of Solid Particles on the Rheological Properties and Buildability of 3DPM Fresh Pastes with Different FA/GGBFS Content
  15. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
    Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
  16. Lloret-Fritschi Ena, Choma Joseph, Scotto Fabio, Szabó Anna et al. (2023-02)
    In-Crease:
    Less Concrete More Paper
  17. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
    Eggshell Pavilion:
    A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
  18. Ishida Takato, Nakada Kiyofumi (2023-02)
    Review of Rheology in Cement-Based Materials and Its Application to 3D Printing Using Concrete
  19. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
    Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
    Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
  20. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
    Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions
  21. Şahin Hatice, Mardani Ali (2023-02)
    Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
    A State‐of‐the‐art Review
  22. Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
    Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
    A Review
  23. Zhang Ruo-Chen, Wang Li, Xue Xuan, Ma Guowei (2023-02)
    Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment
  24. Allameh Seyed, Allameh Hadi, Miller Roger, Lenihan Avery et al. (2023-02)
    On the 3D Printing of Reinforced Concrete
  25. Bedarf Patrick, Calvo Barentin Cristian, Schulte Dinorah, Şenol Ayça et al. (2023-02)
    Mineral Composites:
    Stay-in-Place Formwork for Concrete Using Foam 3D Printing
  26. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
    Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
  27. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
    A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
  28. Baigarina Akerke, Shehab Essam, Ali Md. (2023-02)
    Construction 3D Printing:
    A Critical Review and Future Research-Directions
  29. Beersaerts Glenn, Hertel Tobias, Lucas Sandra, Pontikes Yiannis (2023-02)
    Promoting the Use of Fe-Rich Slag in Construction:
    Development of a Hybrid Binder for 3D Printing
  30. Li Xiao-Sheng, Li Long, Zou Shuai (2023-02)
    Developing Low-pH 3D Printing Concrete Using Solid Wastes
  31. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
    Approach for Sustainability-Assessment for Footbridge Construction Technologies:
    Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
  32. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-02)
    Parametric Modelling of 3D Printed Concrete Segmented Beams with Rebars Under Bending Moments
  33. Bazli Milad, Ashrafi Hamed, Rajabipour Ali, Kutay Cat (2023-02)
    3D Printing for Remote Housing:
    Benefits and Challenges
  34. Chang Ze, Liang Minfei, Xu Yading, Wan Zhi et al. (2023-02)
    Early-Age Creep of 3D Printable Mortar:
    Experiments and Analytical Modelling
  35. Gangotra Ankita, Gado Emanuela, Lewis Joanna (2023-02)
    3D Printing Has Untapped Potential for Climate Mitigation in the Cement Sector
  36. Liu Qiang, Jiang Quan, Zhou Zhenhua, Xin Jie et al. (2023-02)
    The Printable and Hardened Properties of Nano-Calcium Carbonate with Modified Polypropylene-Fibers for Cement-Based 3D Printing
  37. Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
    Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
    A Review
  38. Christen Heidi, Zijl Gideon, Villiers Wibke (2023-02)
    Improving Building Thermal Comfort Through Passive Design:
    An Experimental Analysis of Phase-Change-Material 3D Printed Concrete
  39. Baghdadi Abtin, Ledderose Lukas, Ameri Shaghayegh, Kloft Harald (2023-02)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of Robotic CNC Manufacturing Technique
  40. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
    Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing