Skip to content

Zou Shuai

Information

ORCID
0000-0002-1574-0269
First Contribution
2020-06-27
Last Contribution
2024-11-11
Number Contributions
15
Number Citations
1093

Top Co-Authors

  1. Xiao Jianzhuang (11)
  2. Duan Zhenhua (8)
  3. Ding Tao (7)
  4. Hou Shaodan (3)
  5. Singh Amardeep (3)

Top Cited Articles

  1. Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
    Hardened Properties of Layered 3D Printed Concrete with Recycled Sand (236)

Persons This Author Cites the Most

  1. Tan Ming (53)
  2. Mechtcherine Viktor (38)
  3. Panda Biranchi (36)
  4. Xiao Jianzhuang (35)
  5. Sanjayan Jay (34)

Persons This Author Is Cited Most By

  1. Xiao Jianzhuang (90)
  2. Ding Tao (60)
  3. Singh Amardeep (42)
  4. Liu Qiong (30)
  5. Wang Li (26)

  1. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
    Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
  2. Hou Shaodan, Duan Zhenhua, Ye Taohua, Zou Shuai et al. (2023-06)
    Mechanical Properties and Pore-Structure of 3D Printed Mortar with Recycled Powder
  3. Deng Qi, Zou Shuai, Xi Yonghui, Singh Amardeep (2023-06)
    Development and Characteristic of 3D Printable Mortar with Waste-Glass-Powder
  4. Li Xiao-Sheng, Li Long, Zou Shuai (2023-02)
    Developing Low-pH 3D Printing Concrete Using Solid Wastes
  5. Xiao Jianzhuang, Hou Shaodan, Duan Zhenhua, Zou Shuai (2023-01)
    Rheology of 3D Printable Concrete Prepared by Secondary Mixing of Ready-Mix Concrete
  6. Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
    Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite
  7. Zhang Hanghua, Xiao Jianzhuang, Duan Zhenhua, Zou Shuai et al. (2022-06)
    Effects of Printing Paths and Recycled Fines on Drying Shrinkage of 3D Printed Mortar
  8. Zou Shuai, Xiao Jianzhuang, Duan Zhenhua, Ding Tao et al. (2021-10)
    On Rheology of Mortar with Recycled Fine Aggregate for 3D Printing
  9. Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
    Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces
  10. Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
    Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
    A Cleaner Perspective on 3D Printing
  11. Xiao Jianzhuang, Han Nv, Zhang Lihai, Zou Shuai (2021-05)
    Mechanical and Microstructural Evolution of 3D Printed Concrete with Polyethylene-Fiber and Recycled Sand at Elevated Temperatures
  12. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
    Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
  13. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
    3D Recycled Mortar Printing:
    System-Development, Process-Design, Material-Properties and On-Site-Printing
  14. Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
    Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers
  15. Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
    Hardened Properties of Layered 3D Printed Concrete with Recycled Sand