Skip to content

2023-01

  1. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
    Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
  2. Oval Robin, Nuh Mishael, Costa Eduardo, Madyan Omar et al. (2023-01)
    A Prototype Low-Carbon Segmented Concrete Shell Building Floor System
  3. Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
    A New Concept for Large Additive Manufacturing in Construction:
    Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
  4. Zijl Gideon, Heever Marchant, Cho Seung (2023-01)
    SHCC Reinforced 3D Printed Concrete
  5. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-01)
    Multi-Scale Mechanical Characterization of the Interface in 3D Printed Concrete
  6. Kloft Harald, Schmitz Linus, Müller Christoph, Laghi Vittoria et al. (2023-01)
    Experimental Application of Robotic Wire and Arc Additive Manufacturing-Technique for Strengthening the I-Beam Profiles
  7. Alabbasi Mohammad, Agkathidis Asterios, Chen Hanmei (2023-01)
    Robotic 3D Printing of Concrete Building Components for Residential Buildings in Saudi Arabia
  8. Xiao Jianzhuang, Hou Shaodan, Duan Zhenhua, Zou Shuai (2023-01)
    Rheology of 3D Printable Concrete Prepared by Secondary Mixing of Ready-Mix Concrete
  9. Tran Mien, Vu Tran, Nguyen Thi (2023-01)
    Simplified Assessment for One-Part 3D Printable Geopolymer Concrete Based on Slump and Slump-Flow Measurements
  10. Wang Yuxin, Aslani Farhad, Dyskin Arcady, Pasternak Elena (2023-01)
    Digital Twin Applications in 3D Concrete Printing
  11. Yang Yekai, Wu Chengqing, Liu Zhongxian (2023-01)
    Rate-Dependent Behavior of 3D Printed Ultra-High-Performance Fiber-Reinforced Concrete Under Dynamic Splitting Tensile
  12. Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
    Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
  13. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
    Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
  14. Vijayalaxmi Jeyasingh, Singh Parth (2023-01)
    Comparative Analysis of Concrete 3D Printing and Conventional Construction Technique for Housing
  15. Giridhar Greeshma, Prem Prabhat, Kumar Shankar (2023-01)
    Development of Concrete Mixes for 3D Printing Using Simple Tools and Techniques
  16. Markin Slava, Mechtcherine Viktor (2023-01)
    Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
  17. Poudelet Louison, Molina Miguel, Calvo Laura, Cardona Roger et al. (2023-01)
    Comparison Between Mono- and Bi-Component Extruders in Concrete Additive Manufacturing
  18. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
    Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
    A Case Study on Water Tanks
  19. Du Wenfeng, Zhu Liming, Zhang Hao, Zhou Zhiyong et al. (2023-01)
    Experimental and Numerical Investigation of an Innovative 3DPC Thin-Shell Structure
  20. Fan Lei, Ji Xiaohan, Wu Chengtao, Zhang Wang et al. (2023-01)
    Unlocking Toughness in 3D-Printed Cement Through Bio-Inspired Designs:
    Current Status and Future Perspectives
  21. Kosson Michael, Brown Lesa, Sanchez Florence (2023-01)
    Nano-Mechanical Characterization of 3D Printed Cement-Pastes
  22. Malipeddi Reshma, Adiseshu S. (2023-01)
    Impact of Unique Mixing Methodology on Macro and Microstructural Characteristics of Concrete Containing Slag and Fly-Ash
  23. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
    3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste
  24. Baghdadi Abtin, Heristchian Mahmoud, Ledderose Lukas, Kloft Harald (2023-01)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of the Robotic Subtractive Manufacturing Technique
  25. Vlieger Jentel, Boehme Luc, Blaakmeer Jan, Li Jiabin (2023-01)
    Buildability-Assessment of Mortar with Fine Recycled Aggregates for 3D Printing
  26. Ahmed Ghafur (2023-01)
    A Review of 3D Concrete Printing:
    Materials and Process Characterization, Economic Considerations and Environmental Sustainability
  27. Mendřický Radomír, Keller Petr (2023-01)
    Analysis of Object-Deformations Printed by Extrusion of Concrete-Mixtures Using 3D-Scanning
  28. Zhang Nan, Sanjayan Jay (2023-01)
    Extrusion Nozzle Design and Print Parameter Selections for 3D Concrete Printing
  29. Arunothayan Arun, Sanjayan Jay (2023-01)
    Elevated Temperature Effects on 3D Printed Ultra-High-Performance Concrete
  30. Surehali Sahil, Tripathi Avinaya, Nimbalkar Atharwa, Neithalath Narayanan (2023-01)
    Anisotropic Chloride Transport in 3D Printed Concrete and Its Dependence on Layer-Height and Interface-Types
  31. Khalili Tari Mohammadreza, Reza Faraji Amir, Aslani Alireza, Zahedi Rahim (2023-01)
    Energy Simulation and Life Cycle Assessment of a 3D Printable Building
  32. Xia Lingwei, Bi Minghao, Wu Jie, Wang Fang et al. (2023-01)
    Integrated Lightweight Design-Method via Structural Optimization and Path-Planning for Material-Extrusion
  33. Chu Shaohua, Yang En-Hua, Unluer Cise (2023-01)
    Development of Nanofiber-Reinforced Reactive Magnesia-Based Composites for 3D Printing
  34. Raphael Benny, Senthilnathan Shanmugaraj, Patel Abhishek, Bhat Saqib (2023-01)
    A Review of Concrete 3D Printed Structural Members
  35. Dams Barrie, Chen Binling, Shepherd Paul, Ball Richard (2023-01)
    Development of Cementitious Mortars for Aerial Additive Manufacturing
  36. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
    Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
  37. Jesus Manuel, Costa Joana, Teixeira João, Pessoa Ana Sofia et al. (2023-01)
    Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars
  38. Joon Hillar, Hass Lauri, Peetrimägi Lauri (2023-01)
    Influence of Limestone-Filler on Technological Parameters of Mixtures for 3D Concrete Printing
  39. Lootens Didier (2023-01)
    Giving Shape and Functionality to the Matter:
    Digital Construction
  40. Matos Ana, Emiroğlu Mehmet, Subaşı Serkan, Maraşlı Muhammed et al. (2023-01)
    Architectonic Cement-Based Composites 3D Printing
  41. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Bajāre Diāna (2023-01)
    The Effects of 3D Printing on Frost-Resistance of Concrete
  42. Teixeira João, Zuazua-Ros Amaia, Jesus Manuel, Rangel Bárbara et al. (2023-01)
    How 3DPC Will Transform Architectural Design
  43. Yang Weiyi, Huang Zili, Verma Rupesh, Nguyen Giang et al. (2023-01)
    Effect of Layer-Orientation on Behavior of 3D Printed Rock Specimens in Indirect Tensile Testing