Kaufmann Walter¶

1. Licciardello Lucia, Meillasson Hedwige, Soto Alejandro, Kaufmann Walter (2026-02)
   Direct Tensile Test on Reinforced 3D-Printed Concrete Ties
2. Licciardello Lucia, Soto Alejandro, Kaufmann Walter, Metelli Giovanni (2025-01)
   Determining the Strength of 3D Printed Concrete with the Modified Slant-Shear-Test
3. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
   Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
4. Ammann Rebecca, Gebhard Lukas, Thoma Karel, Mata-Falcón Jaime et al. (2024-09)
   Environmental Benefits of Concrete Floor Slabs Produced with Digitally Fabricated Formworks:
   A Case Study
5. Soto Alejandro, Gebhard Lukas, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-09)
   Structural Testing Campaign for a 30 m Tall 3D Printed Concrete Tower
6. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
   Enhancing Structural Efficiency with Digital Concrete:
   Principles, Opportunities and Case Studies
7. Anton Ana-Maria, Lin Che, Skevaki Eleni, Wang Mingyang et al. (2024-04)
   Tor Alva:
   A 3D Concrete Printed Tower
8. Huber Tobias, Burger Joris, Mata-Falcón Jaime, Kaufmann Walter (2023-03)
   Structural Design and Testing of Material-Optimized Ribbed RC Slabs with 3D Printed Formwork
9. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
   Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
   A Case Study on Water Tanks
10. Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
    Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
11. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
12. Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
    Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
13. Bischof Patrick, Mata-Falcón Jaime, Burger Joris, Kaufmann Walter (2022-06)
    Digitally Fabricated Keyed Concrete Connections
14. Gebhard Lukas, Bischof Patrick, Anton Ana-Maria, Mata-Falcón Jaime et al. (2022-06)
    Pre-Installed Reinforcement for 3D Concrete Printing
15. Mirjan Ammar, Mata-Falcón Jaime, Rieger Carsten, Herkrath Janin et al. (2022-06)
    Mesh Mould Prefabrication
16. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
    Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
    Exploring Reinforcement-Strategies and Optimization
17. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
    Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
18. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
    Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
19. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
    Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
20. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
21. Lee Minu, Mata-Falcón Jaime, Popescu Mariana, Block Philippe et al. (2020-07)
    Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork
22. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
23. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
    Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
24. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
    Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
    A Real-Scale Architectural Demonstrator
25. Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
    Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
26. Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
    Potentials of Steel-Fibers for Mesh Mould Elements
27. Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
    Rethinking Reinforcement for Digital Fabrication with Concrete