Kohler Matthias¶

1. Chadha Kunaljit, Vasey Lauren, Gramazio Fabio, Kohler Matthias (2025-02)
   Adaptive Robotic Tamping:
   A Novel Robotic Method for Formative Surface Finishing in Earth-Based Additive Manufacturing
2. Olivo Nik, Piccioni Valeria, Milano Francesco, Gramazio Fabio et al. (2025-02)
   Thermal Enhancement of Hollow-Core 3DP Through Nozzle Design Customization
3. Vasey Lauren, Chadha Kunaljit, Kango Ananya, Leung Victor et al. (2024-11)
   Impact Printing:
   A Novel Robotic Additive Manufacturing Method for Circular, High-Volume Construction
4. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
   3D Printing of a Multi-Performative Facade:
   Assessment of Air Permeability, Water Tightness, Wind Loads, and Impact Resistance
5. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
   3D Printing of a Multi-Performative Building Envelope:
   Assessment of Air-Permeability, Water-Tightness, Wind-Loads, and Impact-Resistance
6. Jenny David, Gramazio Fabio, Kohler Matthias (2024-09)
   Reimagining Earthen Materials:
   The New Era of Sustainable and Digital Construction
7. Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
   Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
8. Chadha Kunaljit, Vasey Lauren, Kango Ananya, Aejmelaeus-Lindström Johan et al. (2024-04)
   Impact Printed Structures:
   Design Systems and Construction Strategies
9. Burger Joris, Lloret-Fritschi Ena, Akerman Marc, Schwendemann Daniel et al. (2023-11)
   Circular Formwork:
   Recycling of 3D Printed Thermoplastic Formwork for Concrete
10. Leschok Matthias, Cheibas Ina, Piccioni Valeria, Seshadri Bharath et al. (2023-05)
    3D Printing Facades:
    Design, Fabrication, and Assessment Methods
11. Lloret-Fritschi Ena, Choma Joseph, Scotto Fabio, Szabó Anna et al. (2023-02)
    In-Crease:
    Less Concrete More Paper
12. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
    Eggshell Pavilion:
    A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
13. Jenny Ercan, Pietrasik Lukasz, Sounigo Eliott, Tsai Ping-Hsun et al. (2022-11)
    Continuous Mobile Thin-Layer On-Site Printing
14. Frangez Valens, Taha Nizar, Feihl Nicolas, Lloret-Fritschi Ena et al. (2022-10)
    Geometric Feedback System for Robotic Spraying
15. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
    Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
16. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
17. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
    Robotic On-Site Adaptive Thin-Layer Printing:
    Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
18. Mirjan Ammar, Mata-Falcón Jaime, Rieger Carsten, Herkrath Janin et al. (2022-06)
    Mesh Mould Prefabrication
19. Jenny Ercan, Lloret-Fritschi Ena, Jenny David, Sounigo Eliott et al. (2022-06)
    Robotic Plaster Spraying:
    Crafting Surfaces with Adaptive Thin-Layer Printing
20. Ming Coralie, Mirjan Ammar, Medina Ibáñez Jesús, Gramazio Fabio et al. (2022-06)
    Impact Printing
21. Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
    Additive Digital Casting:
    From Lab to Industry
22. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
    Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
    Exploring Reinforcement-Strategies and Optimization
23. Frangez Valens, Lloret-Fritschi Ena, Taha Nizar, Gramazio Fabio et al. (2021-10)
    Depth-Camera-Based Rebar Detection and Digital Reconstruction for Robotic Concrete Spraying
24. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
    Material-Informed Formwork Geometry:
    The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
25. Jenny Ercan, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias (2020-11)
    Crafting Plaster through Continuous Mobile Robotic Fabrication On-Site
26. Graser Konrad, Baur Marco, Apolinarska Aleksandra, Dörfler Kathrin et al. (2020-09)
    DFAB House:
    A Comprehensive Demonstrator of Digital Fabrication in Architecture
27. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
    Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
    Ultra-Thin, 3D Printed Formwork
28. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
29. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
    ACDC:
    The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
30. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
31. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2020-04)
    Mastering Yield-Stress-Evolution and Formwork-Friction for Smart Dynamic Casting
32. Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
    Eggshell:
    Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
33. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
    Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
    A Real-Scale Architectural Demonstrator
34. Szabó Anna, Lloret-Fritschi Ena, Reiter Lex, Gramazio Fabio et al. (2019-09)
    Revisiting Folded Forms with Digital Fabrication
35. Taha Nizar, Walzer Alexander, Ruangjun Jetana, Bürgin Theophil et al. (2019-09)
    Robotic AeroCrete:
    A Novel Robotic Spraying and Surface Treatment Technology for the Production of Slender Reinforced Concrete Elements
36. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
    Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture
37. Dörfler Kathrin, Hack Norman, Sandy Timothy, Giftthaler Markus et al. (2019-09)
    Mobile Robotic Fabrication Beyond Factory Conditions:
    Case Study Mesh Mould Wall of the DFAB HOUSE
38. Lloret-Fritschi Ena, Scotto Fabio, Gramazio Fabio, Kohler Matthias et al. (2018-09)
    Challenges of Real-Scale Production with Smart Dynamic Casting
39. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
    Adapting Smart Dynamic Casting to Thin-Folded Geometries
40. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
41. Kumar Nitish, Hack Norman, Dörfler Kathrin, Walzer Alexander et al. (2017-06)
    Design, Development and Experimental Assessment of a Robotic End-Effector for Non-Standard Concrete Applications
42. Lloret-Fritschi Ena, Reiter Lex, Wangler Timothy, Gramazio Fabio et al. (2017-03)
    Smart Dynamic Casting:
    Slipforming with Flexible Formwork
43. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
    Digital Concrete:
    Opportunities and Challenges
44. Aejmelaeus-Lindström Johan, Willmann Jan, Tibbits Skylar, Gramazio Fabio et al. (2016-04)
    Jammed Architectural Structures:
    Towards Large-Scale Reversible Construction
45. Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
    Complex Concrete Structures:
    Merging Existing Casting Techniques with Digital Fabrication
46. Helm Volker, Willmann Jan, Gramazio Fabio, Kohler Matthias (2013-11)
    In-Situ Robotic Fabrication:
    Advanced Digital Manufacturing Beyond the Laboratory
47. Hack Norman, Lauer Willi, Langenberg Silke, Gramazio Fabio et al. (2013-09)
    Overcoming Repetition:
    Robotic Fabrication Processes at a Large-Scale
48. Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias, Langenberg Silke (2013-05)
    Complex Concrete Constructions:
    Merging Existing Casting Techniques with Digital Fabrication
49. Helm Volker, Jenny Ercan, Gramazio Fabio, Kohler Matthias (2012-10)
    Mobile Robotic Fabrication on Construction Sites:
    DimRob