2021-09
- Dobrzanski James, Buswell Richard, Cavalaro Sergio, Kinnell Peter et al. (2021-09)
Milling a Cement-Based 3D Printable Mortar in Its Green State Using a Ball-Nosed Cutter
- Nassar Roz-Ud-Din, Soroushian Parviz, Balachandra Anagi, Nassar Shumayal et al. (2021-09)
Evaluation of Refined Cement-Based Matrix Systems for Extrusion of Wood-Fiber Cement
- Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-09)
Energy Performance of 3D Printed Concrete Walls:
A Numerical Study
- Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
- Mo Yixin, Yue Songlin, Zhou Qizhen, Feng Bowei et al. (2021-09)
Dynamic Properties and Fractal Characteristics of 3D Printed Cement Mortar in SHPB-Test
- Ranaudo Francesco, Mele Tom, Block Philippe (2021-09)
A Low-Carbon, Funicular Concrete Floor System:
Design and Engineering of the HiLo Floor
- Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
- Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
- Troemner Matthew, Ramyar Elham, Meehan Jonathan, Johnson Benton et al. (2021-09)
A 3D Printing-Centered Approach to Mars-Habitat Architecture and Fabrication
- Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2021-09)
Shrinkage Behavior of Cementitious 3D Printing Materials:
Effect of Temperature and Relative Humidity
- Xu Yanqun, Yuan Qiang, Li Zemin, Shi Caijun et al. (2021-09)
Correlation of Inter-Layer Properties and Rheological Behaviors of 3DPC with Various Printing Time Intervals
- Stoiber Nadine, Kromoser Benjamin (2021-09)
Pushing Concrete Material-Usage to the Limit:
Weight-Optimized, 3D Printed Concrete Girders with External Reinforcement
- Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
- Nedjar Boumediene (2021-09)
Incremental Viscoelasticity at Finite Strains for the Modelling of 3D Concrete Printing
- Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
Material-Informed Formwork Geometry:
The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
- Nováková Kateřina, Vele Jiří (2021-09)
Prvok:
An Experiment with 3D Printing Large Doublecurved Concrete Structure
- Zhan Qiang, Wu Hao, Zhang Liming, Yuan Philip et al. (2021-09)
3D Concrete Printing with Variable-Width Filament
- Lindner Marco, Scharf‐Wildenhain Ronny, Gliniorz Ralf, Vanselow Konrad et al. (2021-09)
Calibration Method for Constant Strands of Material with Robotassisted Concrete Extrusion
- Galeote Eduardo, Fuente Albert (2021-09)
Novel Compressive Constitutive-Model for 3D Printed Concrete
- Graziano Angelo, Cavaliere Ilaria, Costantino Dario, Fallacara Giuseppe et al. (2021-09)
Additive Manufacturing in Architecture:
3D Printing Solutions for Vaulted Spaces
- Kompella Sriram, Marcucci Andrea, Monte Francesco, Bassani Andrea et al. (2021-09)
A Study of Early-Age Shear Properties of 3D Printable Cementitious Mixes with Fiber-Reinforcements
- Miranda Luiza, Lesage Karel, Schutter Geert (2021-09)
Understanding the Structural Build-Up-Rate of Cementitious Materials for 3D Printing
- Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture
- Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-09)
Inter-Layer Bond and Porosity of 3D Printed Concrete
- Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing
- Som Debadri, Zanotti Cristina (2021-09)
Effect of Nano-Additives and Polymeric Viscosity-Modifying-Admixtures (VMA) on the Fresh and Hardened Properties of 3D Printable Concrete Mixtures
- Albalawi Hamed, Khan Zainab, Valle-Pérez Alexander, Kahin Kowther et al. (2021-09)
Sustainable and Eco-Friendly Coral Restoration Through 3D Printing and Fabrication
- Schryver Robin, Cheikh Khadija, Lesage Karel, Yardimci Mert et al. (2021-09)
Numerical Reliability Study Based on Rheological Input for Bingham-Paste-Pumping Using a Finite Volume Approach in OpenFOAM
- Kwon Seung, Jang Kyong, Lee Jung (2021-09)
External Injection Method for Improvement of Concrete Pumpability
- Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
Digital Concrete Construction by Means of Additive Processes:
State of the Art and Research Needs
- Wi Kwangwoo, Wang Kejin, Taylor Peter, Laflamme Simon et al. (2021-09)
Properties and Microstructure of Extrusion-Based 3D Printing Mortar Containing a Highly Flowable, Rapid Set Grout
- Zhang Ping, Lu Xiao-jun (2021-09)
Study on Bending Strength of Cementitious Composites Based on Fiber-Alignment