van Tittelboom Kim¶

1. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
   Durability Assessment of 3D Printed Cement-Based Materials:
   A RILEM TC 304-ADC Interlaboratory Study
2. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
   Layer Interface in 3D Printed Cement-Based Materials:
   Heterogeneous Phase Distribution and New Insights into Formation Mechanism
3. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
   Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
4. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
   Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
5. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
   A (P)Review:
   Adhesion of Printcrete for Tunnel Structures
6. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
   Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
7. Mohan Manu, Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-09)
   Influence of Temperature Variations on the Performance of Two-Component 3D Printable Mixtures
8. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2024-09)
   Material-Volume Reduction with Additive Manufacturing:
   Challenges for Structural Application
9. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
   Static Mixing for Set-on-Demand of Digital Concrete
10. Zhang Yi, Tittelboom Kim, Tao Yaxin, Zhang Yiyuan et al. (2024-09)
    Understanding Carbonation in 3D Printed Cement-Based Materials with Exposed Bottom Surface
11. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
12. Dai Xiaodi, Tao Yaxin, Zhang Yi, Ding Luchuan et al. (2024-08)
    Development of 3D Printable Alkali-Activated Slag-Metakaolin Concrete
13. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2024-07)
    Influence of Curing Conditions on the Shrinkage Behavior of Three-Dimensional Printed Concrete Formwork
14. Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-07)
    CFD Simulation of Twin-Pipe Pumping Process for 3D Concrete Printing
15. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
    Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
    An Exploratory Study
16. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
    Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures
17. Yuan Yong, Wang Xiaoyun, Zhang Jiao-Long, Tao Yaxin et al. (2024-05)
    The Shear Strength of the Interface Between Artificial Rock and Printed Concrete at Super Early-Ages
18. Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
    Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
19. Zhang Yiyuan, Tao Yaxin, Zhang Yi, Tittelboom Kim et al. (2024-04)
    Up-Scaling Active Rheology-Control to Cement-Mortar with the Intervention of an In-Line Magnetic Field
20. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
21. Sun Yubo, Mohan Manu, Tao Yaxin, Zhang Yi et al. (2024-02)
    A Conceptual Design of Two-Stream Alkali-Activated Materials
22. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2024-02)
    Hydration and Microstructure of Calcium-Sulfoaluminate-Portland-Cement Binder Systems for Set-on-Demand Applications
23. Tao Yaxin, Zhang Yi, Schutter Geert, Tittelboom Kim (2024-01)
    Interfacial Bonding of 3D Printable Concrete with Chemically Reactive Coating for Automatic Repair
24. Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
    Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
25. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2023-10)
    The Effect of Curing Conditions on the Service Life of 3D Printed Concrete Formwork
26. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-10)
    Influence of Rheology on Mixing Homogeneity and Mechanical Behavior of Twin-Pipe 3D Printable Concrete
27. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
    Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
28. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2023-06)
    Experimental Study on the Directional Dependency of 3D Printed Concrete in the Elastic Range
29. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2023-06)
    Set-on-Demand of Alkali-Activated Slag Mixture Using Twin-Pipe Pumping
30. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
    Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
31. Mohan Manu, Rahul Attupurathu, Stappen Jeroen, Cnudde Veerle et al. (2023-05)
    Assessment of Pore-Structure Characteristics and Tortuosity of 3D Printed Concrete Using Mercury-Intrusion-Porosimetry and X-Ray Tomography
32. Tao Yaxin, Lesage Karel, Schutter Geert, Tittelboom Kim (2023-04)
    Adhesion Studies in View of Automated Repair Using 3D Concrete Printing
33. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
    Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
    From Transportation to Fabrication
34. Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
    Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay
35. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
    Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
    Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
36. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
    Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing
37. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2022-09)
    Topology-Optimization of Structural Beam Systems considering 3D Concrete Printing Technology-Constraints
38. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
    Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
39. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
    Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
40. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-08)
    3D Printed Concrete as Stay-in-Place Formwork:
    Mechanics During Casting and Curing
41. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
42. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-06)
    Evaluation of the Bond Strength Between 3D Printed and Self-Compacting Concrete
43. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2022-06)
    Salt-Scaling-Resistance of 3D Printed Concrete
44. Ooms Ticho, Vantyghem Gieljan, Tao Yaxin, Bekaert Michiel et al. (2022-06)
    The Production of a Topology-Optimized 3D Printed Concrete Bridge
45. Putten Jolien, Smet M., Heede Philip, Schutter Geert et al. (2022-06)
    Influence of the Print Process on the Durability of Printed Cementitious Materials
46. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2022-06)
    Using Limestone-Powder as a Carrier for the Accelerator in Extrusion-Based 3D Concrete Printing
47. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
    Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
    An Application in Extrusion-Based Concrete 3D Printing
48. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
    A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
49. Putten Jolien, Volder Melissa, Heede Philip, Deprez Maxim et al. (2022-03)
    Transport Properties of 3D Printed Cementitious Materials with Prolonged Time-Gap Between Successive Layers
50. Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
    Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures
51. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
    Properties and Testing of Printed Cement-Based Materials in Hardened State
52. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
    Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
53. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
    Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
54. Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
    Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings
55. Rahul Attupurathu, Mohan Manu, Schutter Geert, Tittelboom Kim (2021-10)
    3D Printable Concrete with Natural and Recycled Coarse Aggregates:
    Rheological, Mechanical and Shrinkage Behavior
56. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-09)
    Inter-Layer Bond and Porosity of 3D Printed Concrete
57. Putten Jolien, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-08)
    Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers
58. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
59. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-01)
    Early-Age Hydration, Rheology and Pumping Characteristics of CSA Cement-Based 3D Printable Concrete
60. Putten Jolien, Snoeck Didier, Coensel R., Schutter Geert et al. (2020-12)
    Early-Age Shrinkage Phenomena of 3D Printed Cementitious Materials with Superabsorbent Polymers
61. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
    Extrusion-Based Concrete 3D Printing from a Material Perspective:
    A State of the Art Review
62. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-10)
    Rheological and Pumping Behavior of 3D Printable Cementitious Materials with Varying Aggregate Content
63. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2020-07)
    Printed Concrete as Formwork-Material:
    A Preliminary Study
64. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-07)
    Evaluating the Influence of Aggregate Content on Pumpability of 3D Printable Concrete
65. Putten Jolien, Olmen Alex, Aerts Marijke, Ascione Emiel et al. (2020-07)
    3D Concrete Printing On-Site:
    A Novel Way of Building Houses?
66. Putten Jolien, Volder Melissa, Heede Philip, Schutter Geert et al. (2020-07)
    3D Printing of Concrete:
    The Influence on Chloride Penetration
67. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2020-07)
    Effect of Limestone-Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
68. Putten Jolien, Azima M., Heede Philip, Mullem T. et al. (2020-06)
    Neutron-Radiography to Study the Water-Ingress via the Inter-Layer of 3D Printed Cementitious Materials for Continuous Layering
69. Putten Jolien, Deprez Maxim, Cnudde Veerle, Schutter Geert et al. (2019-09)
    Microstructural Characterization of 3D Printed Cementitious Materials
70. Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
    Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials
71. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
    The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials