Yuan Yong¶

1. Zia Syed, Yuan Yong, Irfan ul Hassan Muhammad, Sheng Ruyi et al. (2026-03)
   Influence of Sugarcane Bagasse Ash on the Workability and Mechanical Behaviour of 3D-Printed Mortar
2. Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
   Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
3. Zhang Jiao-Long, Yuan Yong, Fatoyinbo Imoleayo, Zhou Lujie et al. (2025-11)
   3D-Printable Mortars Incorporating Municipal Solid Waste Incineration Bottom Ash:
   Linking Hydration to Extrudability and Mechanical Performance
4. Tao Yaxin, Yuan Yong, Zhang Yi, Wangler Timothy (2025-06)
   Pore Structure Analysis of Printcrete Under Varying Temperature
5. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
   A (P)Review:
   Adhesion of Printcrete for Tunnel Structures
6. Yuan Yong, Sheng Ruyi, Yao Xupeng, Pichler Bernhard et al. (2025-03)
   A Three-Step Development Strategy for 3D Printable Concrete Containing Coarse Aggregates
7. Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
   Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
   Emphasis on Rheological and Microstructural Properties
8. Yuan Yong, Wang Xiaoyun, Zhang Jiao-Long, Tao Yaxin et al. (2024-05)
   The Shear Strength of the Interface Between Artificial Rock and Printed Concrete at Super Early-Ages
9. Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2024-05)
   Strategies Towards Large-Scale 3D Printing Without Size-Constraints
10. Tao Yaxin, Yuan Yong (2024-05)
    3D Concrete Printing for Tunnel Linings:
    Opportunities and Challenges
11. Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2023-11)
    Propelling the Widespread Adoption of Large-Scale 3D Printing
12. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
    Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
    From Transportation to Fabrication
13. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
    Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
    Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
14. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
    Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
15. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
    Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
16. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
17. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2022-06)
    Using Limestone-Powder as a Carrier for the Accelerator in Extrusion-Based 3D Concrete Printing
18. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
    Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
19. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
    Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
20. Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
    Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings
21. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
22. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2020-07)
    Effect of Limestone-Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
23. Yuan Yong, Tao Yaxin (2018-03)
    Mixing and Extrusion of Printing Concrete