2022-08
- Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
- Lee Dongyoun, Hong Junho (2022-08)
Development of an Adaptive Slicing Algorithm of Laminated Object Manufacturing Based 3D Printing for Freeform Formwork
- Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
- Pham Thi, Nguyen Thu, Trinh Thanh, Nguyen Anh et al. (2022-08)
Development of 3D Printers for Concrete Structures:
Mix Proportion Design Approach and Laboratory Testing
- Xu Weiguo, Huang Shuyi, Han Dong, Zhang Zhiling et al. (2022-08)
Toward Automated Construction:
The Design-to-Printing Workflow for a Robotic In-Situ 3D Printed House
- Kaliyavaradhan Senthil, Ambily Parukutty, Prem Prabhat, Ghodke Swapnil (2022-08)
Test-Methods for 3D Printable Concrete
- Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
3D Printing Technologies in Architectural Design and Construction:
A Systematic Literature Review
- Aydin Eylül, Kara Burhan, Bundur Zeynep, Özyurt Nilüfer et al. (2022-08)
A Comparative Evaluation of Sepiolite and Nano-Montmorillonite on the Rheology of Cementitious Materials for 3D Printing
- Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
- Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
- Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
- Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite
- Araújo Rísia, Martinelli Antônio, Cabral Kleber, Dantas André et al. (2022-08)
Thermal Performance of Cement-Leca Composites for 3D Printing
- Riegger Felix, Zäh Michael (2022-08)
Additive Manufacturing of Steel-Reinforcements:
Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
- Peng Guanhong (2022-08)
Digital Fabrication and Mechanical Properties of 3D Printing Concrete
- Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
3D Concrete Printing:
Lattice Modeling of Structural Failure considering Damage and Deformed Geometry
- Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
Bond Behavior Between Steel-Bars and 3D Printed Concrete:
Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
- Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-08)
3D Printed Concrete as Stay-in-Place Formwork:
Mechanics During Casting and Curing
- Mousavi Seyed, Dehestani Mehdi (2022-08)
Influence of Latex and Vinyl Disposable Gloves as Recycled Fibers in 3D Printing Sustainable Mortars
- Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2022-08)
Rheometry for Concrete 3D Printing:
A Review and an Experimental Comparison
- Khosravani Mohammad, Haghighi Azadeh (2022-08)
Large-Scale Automated Additive Construction:
Overview, Robotic Solutions, Sustainability, and Future Prospect
- Lesovik Valeriy, Tolstoy Aleksandr, Fediuk Roman, Amran Mugahed et al. (2022-08)
Improving the Performances of a Mortar for 3D Printing by Mineral Modifiers
- Raza Muhammad, Zhong Ray (2022-08)
A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
- Ebrahimi Mahdi, Mohseni Mohammad, Aslani Alireza, Zahedi Rahim (2022-08)
Investigation of Thermal Performance and Life Cycle Assessment of a 3D Printed Building
- Zhou Wen, McGee Wesley, Zhu He, Gökçe H. et al. (2022-08)
Time-Dependent Fresh Properties Characterization of 3D Printing Engineered Cementitious Composites:
On the Evaluation of Buildability