Sanjayan Jay¶
Information
- ORCID
- 0000-0002-5400-5988
- First Contribution
- 2017-02-20
- Last Contribution
- 2025-12-15
- Number Contributions
- 110
- Number Citations
- 5870
Top Co-Authors
- Nematollahi Behzad (31)
- Xia Ming (24)
- Rajeev Pathmanathan (21)
- Ramakrishnan Sayanthan (21)
- Bong Shin (12)
Top Cited Articles
Persons This Author Cites the Most
- Bos Freek (182)
- Mechtcherine Viktor (178)
- Tan Ming (168)
- Buswell Richard (149)
- Salet Theo (149)
Persons This Author Is Cited Most By
- Ma Guowei (166)
- Xiao Jianzhuang (165)
- Wang Li (160)
- Zhang Yamei (144)
- Mechtcherine Viktor (135)
- Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2025-12)
3D Concrete-Printed Geocell for Reinforcing Unbound Granular Pavement Layers - Zhang Hui, Wu Jie, Huang Bo-Tao, Yu Rena et al. (2025-11)
Cross-Scale Mechanisms of Anisotropy in 3D-Printed Ultra-High-Performance Concrete - Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
A Design Method for Printing-Friendly Structure - Xie Xiangyu, Liu Xuemei, Zhang Nan, Zhang Lihai et al. (2025-09)
Capillary Extrusion Rheometry for Characterising Wall Slip Behaviour in 3D Printed Concrete - Zhang Nan, Sanjayan Jay (2025-08)
Concrete 3D Printing and Digital Fabrication Technologies for Bridge Construction - Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing - Rajeev Pathmanathan, Kopitha Kirushnapillai, Sanjayan Jay (2025-06)
Carbonated Water and MgO for Improved Performance of 3D Concrete Printing. - Rajeev Pathmanathan, Nissanka Nilusha, Sanjayan Jay (2025-06)
Experimental Study on Time-Dependent Pumping Behaviour of 3D Concrete Printing - Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-12)
An Eco-Friendly Ultra-High-Performance Geopolymer Concrete with Quaternary Binders for 3D Printing - Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2024-12)
CO2 Sequestration and Low-Carbon-Strategies in 3D Printed Concrete - Rajeev Pathmanathan, Sanjayan Jay (2024-11)
Current Developments in the Application of Extrusion-Based 3D Concrete Printing - Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-09)
Active Rheology-Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing - Zhang Nan, Sanjayan Jay (2024-09)
Rheological Modifiers in Optimizing Quick Nozzle Mixing Technology for 3D Concrete Printing - Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
Snapshot on 3D Printing with Alternative Binders and Materials:
Earth, Geopolymers, Gypsum and Low-Carbon Concrete - Zhang Nan, Sanjayan Jay (2024-07)
Pumping-Less 3D Concrete Printing Using Quick Nozzle Mixing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-07)
Set-on-Demand Geopolymer for Concrete 3D Printing Using Ternary Activator - Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction - Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing - Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-07)
Application of Textile Reinforcement for 3D Concrete Printed Structures - Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2024-07)
Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing - Ramesh Akilesh, Rajeev Pathmanathan, Xu Shanqing, Sanjayan Jay et al. (2024-06)
Impact Response of Textile-Reinforced 3D Printed Concrete Panels - Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-06)
Encapsulation of Sodium-Silicate to Attain on Demand Buildability Enhancement in Concrete 3D Printing - Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance - Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-05)
Enhancing Inter-Layer Bonding Strength of 3D Printed Ternary Geopolymer Using Calcium-Carbonate-Whiskers Spray - Bayatkashkooli Samira, Amirsardari Anita, Rajeev Pathmanathan, Sanjayan Jay et al. (2024-05)
Investigation of Axial Load Capacity of 3D Printed Concrete Wall - Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing - Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-02)
Bond-Slip Behavior of Textile-Reinforcement in 3D Printed Concrete - Zhang Nan, Sanjayan Jay (2024-01)
Quick Nozzle Mixing Technology for 3D Printing Foam-Concrete - Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2023-11)
Development of a Prototype Concept for Using 3D Concrete Printing in Pavement Construction - Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures - Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-10)
Investigating PCM Encapsulated NaOH Additive for Set-on-Demand in 3D Concrete Printing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-09)
Rapid Early-Age Strength Development of In-Line Activated Geopolymer for Concrete 3D Printing - Zhang Nan, Sanjayan Jay (2023-08)
Surfactants to Enable Quick Nozzle Mixing in 3D Concrete Printing - Zhang Nan, Sanjayan Jay (2023-07)
Mechanisms of Rheological Modifiers for Quick Mixing Method in 3D Concrete Printing - Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay (2023-05)
Effect of Magnetorheological Additives on the Buildability of 3D Concrete Printing - Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2023-04)
Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing - Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste - Zhang Nan, Sanjayan Jay (2023-01)
Extrusion Nozzle Design and Print Parameter Selections for 3D Concrete Printing - Arunothayan Arun, Sanjayan Jay (2023-01)
Elevated Temperature Effects on 3D Printed Ultra-High-Performance Concrete - Arunothayan Arun, Nematollahi Behzad, Khayat Kamal, Ramesh Akilesh et al. (2022-11)
Rheological Characterization of Ultra-High-Performance Concrete for 3D Printing - Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-11)
Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing:
Correction - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-10)
In-Line Activation of Geopolymer-Slurry for Concrete 3D Printing - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2022-08)
Rheometry for Concrete 3D Printing:
A Review and an Experimental Comparison - Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-07)
Enhancing the Properties of Foam-Concrete 3D Printing Using Porous Aggregates - Yu Shiwei, Sanjayan Jay, Du Hongjian (2022-07)
Effects of Cement Mortar Characteristics on Aggregate-Bed 3D Concrete Printing - Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-06)
Set-On Demand Concrete by Activating Encapsulated Accelerator for 3D Printing - Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-06)
Fresh and Hardened Properties of 3D Printable Foam-Concrete Containing Porous Aggregates - Ma Guowei, Yan Yufei, Zhang Mo, Sanjayan Jay (2022-05)
Effect of Steel-Slag on 3D Concrete Printing of Geopolymer with Quaternary Binders - Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-05)
Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing - Ramakrishnan Sayanthan, Kanagasuntharam Sasitharan, Sanjayan Jay (2022-05)
In-Line Activation of Cementitious Materials for 3D Concrete Printing - Marchment Taylor, Sanjayan Jay (2022-04)
Lap Joint Reinforcement for 3D Concrete Printing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-02)
Set-on-Demand Geopolymer Using Print-Head Mixing for 3D Concrete Printing - Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing - Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete - Zhang Nan, Xia Ming, Sanjayan Jay (2021-10)
Short-Duration Near-Nozzle Mixing for 3D Concrete Printing - Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay, Pasupathy Kirubajiny (2021-08)
Concrete 3D Printing of Lightweight Elements Using Hollow-Core Extrusion of Filaments - Yu Shiwei, Xia Ming, Sanjayan Jay, Yang Lin et al. (2021-07)
Microstructural Characterization of 3D Printed Concrete - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2021-06)
Technologies for Improving Buildability in 3D Concrete Printing - Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2021-06)
Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete:
Correction - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2021-05)
Extrusion Rheometer for 3D Concrete Printing - Marchment Taylor, Sanjayan Jay (2021-04)
Reinforcement Method for 3D Concrete Printing Using Paste-Coated Bar Penetrations - Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates - Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing - Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
Integrating Reinforcement in Digital Fabrication with Concrete:
A Review and Classification Framework - Sanjayan Jay, Jayathilakage Roshan, Rajeev Pathmanathan (2020-11)
Vibration-Induced Active Rheology-Control for 3D Concrete Printing - Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction - Marchment Taylor, Sanjayan Jay (2020-09)
Bond Properties of Reinforcing Bar Penetrations in 3D Concrete Printing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing - Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables - Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder - Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete - Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers - Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2020-07)
Characterizing Extrudability for 3D Concrete Printing Using Discrete Element Simulations - Marchment Taylor, Sanjayan Jay (2020-07)
Penetration Reinforcing Method for 3D Concrete Printing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-07)
Buildability of Geopolymer Concrete for 3D Printing with Microwave-Heating - Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
Effects of Curing Condition and Print-Time Interval - Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing - Yu Shiwei, Sanjayan Jay, Du Hongjian (2020-07)
Impact of Particle-Size and Grading on Aggregate-Bed 3D Concrete Printing - Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
Steel-Fiber-Reinforced 3D Printed Concrete:
Influence of Fiber Sizes on Mechanical Performance - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing - Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-12)
Comparison of Rheology Measurement Techniques Used in 3D Concrete Printing Applications - Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Sanjayan Jay (2019-12)
Dimensional Accuracy, Flowability, Wettability, and Porosity in Inkjet 3DP for Gypsum and Cement Mortar Materials - Marchment Taylor, Sanjayan Jay (2019-10)
Mesh Reinforcing Method for 3D Concrete Printing - Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications - Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2019-09)
Predication of Strength-Based Failure in Extrusion-Based 3D Concrete Printing - Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications - Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process - Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction - Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications - Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications - Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification - Avrutis Daniel, Nazari Ali, Sanjayan Jay (2019-02)
Industrial Adoption of 3D Concrete Printing in the Australian Market - Marchment Taylor, Sanjayan Jay, Nematollahi Behzad, Xia Ming (2019-02)
Inter-Layer Strength of 3D Printed Concrete - Nematollahi Behzad, Xia Ming, Vijay Praful, Sanjayan Jay (2019-02)
Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications - Sanjayan Jay, Nematollahi Behzad (2019-02)
3D Concrete Printing for Construction Applications - Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
Development of Powder-Based 3D Concrete Printing Using Geopolymers - Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
Properties of Powder-Based 3D Printed Geopolymers - Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-01)
Direct-Shear-Test for the Assessment of Rheological Parameters of Concrete for 3D Printing Applications - Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing - Ding Zhu, Wang Xiaodong, Sanjayan Jay, Zou Patrick et al. (2018-11)
A Feasibility Study on HPMC-Improved Sulphoaluminate Cement for 3D Printing - Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction - Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2018-09)
Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature - Marchment Taylor, Sanjayan Jay (2018-09)
Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing - Nematollahi Behzad, Xia Ming, Bong Shin, Sanjayan Jay (2018-09)
Hardened Properties of 3D Printable One-Part Geopolymer for Construction Applications - Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications - Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete - Marchment Taylor, Xia Ming, Dodd Elise, Sanjayan Jay et al. (2017-07)
Effect of Delay-Time on the Mechanical Properties of Extrusion-Based 3D Printed Concrete - Nematollahi Behzad, Xia Ming, Sanjayan Jay (2017-07)
Current Progress of 3D Concrete Printing Technologies - Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing