Skip to content

2018-04

  1. Qian Ye, Schutter Geert (2018-04)
    Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield-Stress and Thixotropy of Cement-Pastes
  2. Mechtcherine Viktor, Nerella Venkatesh (2018-04)
    Incorporating Reinforcement in 3D-Printing with Concrete
  3. Burroughs Jedadiah, Johnson Carol, Chaar Ghassan, Banko Marion et al. (2018-04)
    Automated Construction with Concrete:
    Response of Wall- and Beam-Sections to Blast-Loads
  4. Hojati Maryam, Nazarian Shadi, Duarte José, Radlińska Aleksandra et al. (2018-04)
    3D Printing of Concrete:
    A Continuous Exploration of Mix-Design and Printing-Process
  5. Zareiyan Babak, Khoshnevis Behrokh (2018-04)
    _Effects of Mixture Ingredients on Inter-Layer Adhesion of Concrete in Contour Crafting
  6. Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
    Fresh Properties of a Novel 3D Printing Concrete Ink
  7. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
    Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
  8. Jassmi Hamad, Najjar Fady, Mourad Abdel-Hamid (2018-04)
    Large-Scale 3D Printing:
    The Way Forward
  9. Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
    3D Printing of Earth-Based Materials:
    Processing Aspects
  10. Secrieru Egor, Cotardo Dario, Mechtcherine Viktor, Lohaus Ludger et al. (2018-04)
    Changes in Concrete Properties During Pumping and Formation of Lubricating Material Under Pressure
  11. Chua Chee, Yeong Wai, An Jia (2018-04)
    Special Issue:
    NextGen Materials for 3D Printing
  12. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete
  13. Tian Wei, Han Nv (2018-04)
    Pore Characteristics (>0.1mm) Of Non-Air-Entrained Concrete Destroyed by Freeze-Thaw-Cycles Based on CT Scanning and 3D Printing
  14. Yin Hongxi, Qu Ming, Zhang Haiyan, Lim YeChan (2018-04)
    3D Printing and Buildings:
    A Technology Review and Future Outlook
  15. Ketel Sabrina, Falzone Gabriel, Wang Bu, Washburn Newell et al. (2018-04)
    A Printability Index for Linking Slurry Rheology to the Geometrical Attributes of 3D Printed Components