Zhang Yunsheng¶

1. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
   Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
2. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
   Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
3. Wang Lingyu, Zhang Yu, Wang Zhiyong, Chen Juan et al. (2024-11)
   Additive Manufacturing in Construction Using Unmanned Aerial Vehicle:
   Design, Implementation, and Material-Properties
4. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
   Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
5. Chen Yidong, Zhang Yunsheng, Liu Zhiyong, Zhang Wenhua et al. (2024-03)
   Quantitative Surface Quality Evaluation for 3D Printed Concrete with Coarse Aggregate Through 3D Scanning
6. Zhu Wenxuan, Zhu Shidong, Li Wangxin, Zhang Yu et al. (2023-11)
   A Study on the Printability of Manufactured Sand Concrete
7. Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
   Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
8. Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
   Inter-Layer Adhesion of 3D Printed Concrete:
   Influence of Layer Stacked Vertically
9. Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
   3D Printed Concrete Permanent Formwork:
   Effect of Post-Cast Concrete Proportion on Interface Bonding
10. Chen Yidong, Zhang Wenhua, Zhang Yunsheng, Zhang Yu et al. (2023-03)
    3D Printed Concrete with Coarse Aggregates:
    Built-In-Stirrup Permanent Concrete Formwork for Reinforced Columns
11. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-12)
    Influence of the Pore Feature on the Water-Uptake in 3D Printed Concrete
12. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
    Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
13. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
    Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
14. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
    Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
15. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
    Correction
16. Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
    Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete
17. Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
    Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
    Printability and Direction-Dependent Mechanical Performance
18. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
19. Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
    Layer-Interface Properties in 3D Printed Concrete:
    Dual Hierarchical Structure and Micromechanical Characterization
20. Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
    Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
21. Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
    Fresh Properties of a Novel 3D Printing Concrete Ink