Bos Freek¶

1. Cheng Shengbo, Grimm Benedikt, Unterreiner Michael, Hechtl Christian et al. (2026-03)
   Properties of the Transition Region in 3D Printed Functionally Graded Concrete Through Near Nozzle Binder-Aggregate Mixing
2. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
   Adaptive-Binder-Aggregate Mixing (ABAM):
   Concept for Extrusion-Based Multi-Material 3D Concrete Printing
3. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Approach and Main Results:
   Mechanical Properties of 3D Printed Concrete
4. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Compressive Strength and Modulus of Elasticity:
   Mechanical Properties of 3D Printed Concrete
5. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
   Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
   Mechanical Properties of 3D Printed Concrete
6. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
   Flexural and Tensile Strength:
   Mechanical Properties of 3D Printed Concrete
7. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
   Establishing Benchmark Properties for 3D-Printed Concrete:
   A Study of Printability, Strength, and Durability
8. Hass Lauri, Bos Freek, Salet Theo (2024-12)
   Bond Governed Interactions Between Helical Reinforcement and 3D Printed Concrete
9. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
   Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
10. Auer Daniel, Bos Freek, Fischer Oliver (2024-09)
    3DCP.fyi:
    A Comprehensive Citation Network Graph on the State of the Art in 3D Concrete Printing
11. Nefs Karsten, Sloots Joes, Kroon Kim, Bos Freek et al. (2024-05)
    Analytical Modeling of the Orientation-Dependency of 3D Printed SHCC at Increasing Levels of Scale
12. Nefs Karsten, Kroon Kim, Sloots Joes, Bos Freek et al. (2024-03)
    Orientation-Dependency of 3D Printed SHCC at Increasing Length Scale
13. Souza Eduarda, Ribeiro Borges Paulo, Stengel Thorsten, Nematollahi Behzad et al. (2024-03)
    3D Printed Sustainable Low-Cost Materials for Construction of Affordable Social Housing in Brazil:
    Potential, Challenges, and Research Needs
14. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
    Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
    Case Study of a Spiral Staircase
15. Auer Daniel, Bos Freek, Olabi Mohammad, Fischer Oliver (2023-10)
    Fiber-Reinforcement of 3D Printed Concrete by Material-Extrusion-Tool-Paths Aligned to Principal Stress-Trajectories
16. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
    Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
17. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-08)
    3D Printable Strain-Hardening Cementitious Composites (3DP-SHCC):
    Tailoring Fresh and Hardened State Properties
18. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
    Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
19. Fischer Oliver, Bos Freek (2023-04)
    Additive Manufacturing in Concrete Construction:
    Ways to Implement It in Engineering Practice
20. Nefs Karsten, Menkovski Vlado, Bos Freek, Suiker Akke et al. (2022-12)
    Automated Image Segmentation of 3D Printed Fibrous Composite Micro-Structures Using a Neural Network
21. Hass Lauri, Bos Freek, Salet Theo (2022-09)
    Characterizing the Bond Properties of Automatically Placed Helical Reinforcement in 3D Printed Concrete
22. Hass Lauri, Bos Freek (2022-06)
    Robotically Placed Reinforcement Using the Automated Screwing Device:
    An Application Perspective for 3D Concrete Printing
23. Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
    Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System
24. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
    A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
25. Bos Freek, Menna Costantino, Pradena Mauricio, Kreiger Eric et al. (2022-03)
    The Realities of Additively Manufactured Concrete Structures in Practice
26. Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
    Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution
27. Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
    Structural Design and Testing of Digitally Manufactured Concrete Structures
28. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
29. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
30. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
31. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
    A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
    The Case of a 29m Bridge in the Netherlands
32. Bos Freek, Kruger Jacques, Lucas Sandra, Zijl Gideon (2021-04)
    Juxtaposing Fresh Material-Characterisation-Methods for Buildability-Assessment of 3D Printable Cementitious Mortars
33. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
    Integrating Reinforcement in Digital Fabrication with Concrete:
    A Review and Classification Framework
34. Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
    3D Concrete Printing:
    Free-Form Geometries with Improved Ductility and Strength
35. Bos Freek, Dezaire Steven, Ahmed Zeeshan, Hoekstra Anne et al. (2020-07)
    Bond of Reinforcement-Cable in 3D Printed Concrete
36. Buswell Richard, Kinnell Peter, Xu Jie, Hack Norman et al. (2020-07)
    Inspection Methods for 3D Concrete Printing
37. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
    Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
38. Grasser Georg, Pammer Lorenz, Köll Harald, Werner E. et al. (2020-07)
    Complex Architecture in Printed Concrete:
    The Case of the Innsbruck University 350th Anniversary Pavilion COHESION
39. Hass Lauri, Bos Freek (2020-07)
    Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete
40. Bos Freek, Wolfs Robert, Salet Theo (2020-06)
    CCR Digital Concrete 2020 SI:
    Editorial
41. Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
    A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete
42. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
    Mechanical Behavior of Printed Strain-Hardening Cementitious Composites
43. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
    Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
44. Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
    On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites
45. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
46. Ahmed Zeeshan, Bos Freek, Brunschot Maikel, Salet Theo (2020-02)
    On-Demand Additive Manufacturing of Functionally Graded Concrete
47. Bos Freek, Ahmed Zeeshan, Rodríguez Claudia, Figueiredo Stefan (2019-12)
    3D Concrete Printing for Structural Applications
48. Adilenidou Yota, Ahmed Zeeshan, Bos Freek, Colletti Marjan (2019-10)
    Unprintable Forms
49. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
    The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
50. Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
    Digital Concrete:
    A Review
51. Wolfs Robert, Bos Freek, Salet Theo (2019-06)
    Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing
52. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
    Hardened Properties of 3D Printed Concrete:
    The Influence of Process Parameters on Inter-Layer Adhesion
53. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
    An Approach to Develop Printable Strain-Hardening Cementitious Composites
54. Bos Freek, Bosco Emanuela, Salet Theo (2018-11)
    Ductility of 3D Printed Concrete Reinforced with Short Straight Steel-Fibers
55. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2018-09)
    Large-Scale Testing of Digitally Fabricated Concrete (DFC) Elements
56. Borg Costanzi Christopher, Ahmed Zeeshan, Schipper Roel, Bos Freek et al. (2018-07)
    3D Printing Concrete on Temporary Surfaces:
    The Design and Fabrication of a Concrete Shell Structure
57. Wolfs Robert, Bos Freek, Salet Theo (2018-06)
    Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete
58. Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
    Rethinking Reinforcement for Digital Fabrication with Concrete
59. Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
    Design of a 3D Printed Concrete Bridge by Testing
60. Salet Theo, Ahmed Zeeshan, Bos Freek (2018-05)
    3D Printed Concrete Bridge
61. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
    Early-Age Mechanical Behaviour of 3D Printed Concrete:
    Numerical Modelling and Experimental Testing
62. Coenders Jeroen, Mathot Maarten, Martens Pascal, Bos Freek et al. (2017-12)
    Optimizing 3D Concrete Printing:
    Exploring Potentials and Limitations of Materials and Production
63. Schipper Roel, Borg Costanzi Christopher, Bos Freek, Ahmed Zeeshan et al. (2017-12)
    Double Curved Concrete Printing:
    Printing on Non-Planar Surfaces
64. Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
    Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete
65. Bos Freek, Ahmed Zeeshan, Wolfs Robert, Salet Theo (2017-06)
    3D Printing Concrete with Reinforcement
66. Martens Pascal, Mathot Maarten, Bos Freek, Coenders Jeroen (2017-06)
    Optimizing 3D Printed Concrete Structures Using Topology Optimization
67. Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
    3D Concrete Printing:
    A Structural Engineering Perspective
68. Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
    A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
69. Ahmed Zeeshan, Bos Freek, Wolfs Robert, Salet Theo (2016-11)
    Design Considerations Due to Scale Effects in 3D Concrete Printing
70. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
    Additive Manufacturing of Concrete in Construction:
    Potentials and Challenges of 3D Concrete Printing