Skip to content

Sapata Alise

Information

ORCID
0009-0007-1221-2026
First Contribution
2023-10-10
Last Contribution
2025-10-29
Number Contributions
11
Number Citations
24

Top Co-Authors

  1. Šinka Māris (11)
  2. Bajāre Diāna (6)
  3. Hanžič Lucija (5)
  4. Šahmenko Genādijs (5)
  5. Šlosbergs Pēteris (4)

Top Cited Articles

  1. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
    Establishing Benchmark Properties for 3D-Printed Concrete:
    A Study of Printability, Strength, and Durability     (8)

Persons This Author Cites the Most

  1. Mechtcherine Viktor (18)
  2. van Tittelboom Kim (17)
  3. de Schutter Geert (16)
  4. Bos Freek (15)
  5. Wolfs Robert (14)

Persons This Author Is Cited Most By

  1. Subramaniam Kolluru (3)
  2. Kamakshi Tippabhotla (2)
  3. Kulkarni Omkar (2)
  4. Teng Fei (2)
  5. Yang Minxin (2)

  1. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
    Durability Assessment of 3D Printed Cement-Based Materials:
    A RILEM TC 304-ADC Interlaboratory Study
  2. Sapata Alise, Pluminss Ernests, Šlosbergs Pēteris, Šinka Māris (2025-08)
    Utilizing Construction Demolition Waste Aggregates in Cement- Free Concrete for 3D Printing
  3. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
    Compressive Strength and Modulus of Elasticity:
    Mechanical Properties of 3D Printed Concrete
  4. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
    Flexural and Tensile Strength:
    Mechanical Properties of 3D Printed Concrete
  5. Sapata Alise, Šinka Māris, Puzule Līga, Plūmiņš Ernests et al. (2025-05)
    Developing Low-CO₂ 3D-Printable Concrete with Waste Ash and Recycled Aggregates
  6. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
    Establishing Benchmark Properties for 3D-Printed Concrete:
    A Study of Printability, Strength, and Durability
  7. Hanžič Lucija, Štefančič Mateja, Šter Katarina, Zalar Serjun Vesna et al. (2025-01)
    Collision Milling of Oil Shale Ash as Constituent Pretreatment in Concrete 3D Printing
  8. Šahmenko Genādijs, Šinka Māris, Bumanis Girts, Sapata Alise et al. (2024-09)
    Ternary Gypsum-Cement-Pozzolan Composites for 3D Printing with Reduced Environmental Impact
  9. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Bajāre Diāna et al. (2024-09)
    Development of 3D Printable Cement-Based Composite Containing Oil Shale Ash
  10. Šahmenko Genādijs, Puzule Līga, Sapata Alise, Šlosbergs Pēteris et al. (2024-06)
    Gypsum-Cement-Pozzolan Composites for 3D Printing:
    Properties and Life Cycle Assessment
  11. Bumanis Girts, Sapata Alise, Šinka Māris, Spuriņa Ella et al. (2023-10)
    Additive Manufacturing of Lightweight Gypsum and Expanded Polystyrene Granulate Composite