2025-10
- Alhussain Ali, Duarte José, Brown Nathan (2025-10)
Stress-Guided Corrugated Geometry for 3D Concrete PrintedBuilding Envelopes
- Darweesh Barrak, Schleicher Simon (2025-10)
Non-Planar Granular 3D Printing:
Advancing Material Versatility and Reuse Through Multi-Axis Fabrication
- Darweesh Barrak, Yavariba Jestani Yasaman, Wang Shaoyi, Zhou Todd et al. (2025-10)
Conformal 3D Printing on Bending-Active Formwork:
Exploring a New Approach to the Fabrication of Wide-Spanning Structures
- Fromm Asko, Gross Rolf, Schomann Melanie, Smogor Jagoda et al. (2025-10)
Method of Manufacturing a Multifunctional Concrete Component
- Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers
- Kim Chisung, Rider Benjamin, Stewart Lauren, Kurtis Kimberly et al. (2025-10)
Towards a Design-to-Fabrication Workflow for 3D Concrete Printed Drainage Invert Shell Structures
- Kim Young, Scoppa Martin, Haddad Madhar (2025-10)
An Investigation into the Role of 3D Printing in Residential Buildings:
An Emirati Housing Case Study
- Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
Printability, Mechanical Strength, and FEM-Based Structural Assessment
- Marco Giancarlo, Cheung Lok (2025-10)
Real-Time Defect Detection, Analysis and Suggestion in Adaptive 3D Concrete Printing via Multimodal LLM Integration
- Marco Giancarlo, Yau Ho, Lombardi Davide (2025-10)
Stress-Informed Non-Planar Slicing for 3D Concrete Printing
- Masri Abdullah, Vazquez Elaine, Haddad Assed, Najjar Mohammed (2025-10)
Life Cycle Costing in 3D Printing:
A Literature Review
- Matos Ana, Milheiro-Oliveira Paula, Pinto Nuno, Pimentel Mário (2025-10)
Cementitious Mortars for Sustainable 3D Printing
- Melcher Grace, Waggoner Mark (2025-10)
Building ICONs Catenary Dome:
A Framework for 3D Printing Shell Structures
- Mostert Jean-Pierre, Kruger Jacques (2025-10)
Numerically Optimised Filament Surface Topology Towards Maximum Bond Strength in 3D Printed Concrete
- Müller Niklas, Claßen Martin (2025-10)
Additive Manufacturing of Topology-Optimized Lightweight Slabs Using Foam Concrete
- Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates
- Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation
- Zhi Yefan, Akbarzadeh Masoud (2025-10)
Surface-Toolpath Twins of Shell Components in 3D Concrete Printing for Optimized Buildability and Surface Quality
- Bradshaw James, Balasubramanian Swathi, Si Wen, Khan Mehran et al. (2025-10)
Towards Greener 3D Printing:
A Performance Evaluation of Silica Fume-Modified Low-Carbon Concrete
- González-Aviña J., Hosseinpoor Masoud, Yahia Ammar, Kohandelnia Mojtaba et al. (2025-10)
Anionic Biopolymers to Enhance Concrete Rheological Properties for 3D Printing Applications
- Kiński Wojciech, Siwicki Przemysław, Zieliński Jacek, Smater Michał (2025-10)
Adaptation of a Large-Scale, Modular Printer-Milling Machine for 3D Printing from Concrete
- Liu Renlong, Cheng Zhangqi (2025-10)
Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
Influencing Factors and Mechanisms
- Öztürk Ece, Borgianni Yuri, Ince Ceren (2025-10)
3D Printing in the Construction Sector:
Identification of Key Topics, Technologies, Applications and Relevant Factors Discussed in the Literature
- Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
- Haripan Vislavath, Senthilnathan Shanmugaraj, Santhanam Manu, Raphael Benny (2025-10)
Printability Assessment of Concrete 3D Printed Elements with Recycled Fine Aggregate
- Paul Suvash, Lee Junghyun, Tay Yi, Lim Sean et al. (2025-10)
Unlocking the Sustainable Potential of 3D Concrete Printing with Large Aggregates and Steam–CO2 Curing
- Valeri Manuela, Sangiorgio Valentino, Cantagallo Christina (2025-10)
From Traditional Materials to Geopolymers:
History, Performance, Sustainability and 3D Printing Applications
- Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
Durability Assessment of 3D Printed Cement-Based Materials:
A RILEM TC 304-ADC Interlaboratory Study
- Kul Anil, Kocaer Öznur (2025-10)
Parametric Analysis of Design and Operational Parameters in 3D Concrete Printing of Wall Elements
- Gao Shan, Li Tianyu, Yuan Jian, Nishiwaki Tomoya et al. (2025-10)
Mechanical Properties of 3D-Printed Molybdenum Tailings Mortar
- Liu Junli, Zhang Shipeng, Hao Lucen, Wu Bo et al. (2025-10)
Rapid Rheology Control and Stiffening of 3D-Printed Cement Mortar via CO2 Flash Mixing in a 2K Printing System
- Mesoudy Mouad, Foulki Rida, Amegouz Driss (2025-10)
3D Concrete Printing:
Optimizing the Design of Interlocking 3D Printed Concrete Blocks for Fast and Sustainable Construction
- Zhang Chao, Zhu Xiaohong, Li Muduo, Zhang Yuying et al. (2025-10)
Enhancing Interface Adhesion of 3D Printable Concrete by Biochar Integration
- Ataei Sarah, Jafari Amirhosein (2025-10)
Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
A Case Study Analysis
- Albostami Asad, Mohammad Malek, Ismael Bashar, Hamd Rwayda (2025-10)
Optimized Strength Predictions for 3D Printed Fiber-Reinforced Concrete:
Machine Learning-Driven Insights
- Crook Thomas, Li Matthew, Buswell Richard, Allinson David (2025-10)
Anisotropic Hygrothermal Properties of 3D Printed Concrete
- Ding Yong, Kindler Robert, Cen Tianyu, Chen Xiulin et al. (2025-10)
Valorization of Demolition Waste and Biomass Byproduct into Sustainable Building Materials via Carbon Mineralization and 3D Printing
- Ngo Than, Li Shuai, Huynh Tien, Zhang Y. et al. (2025-10)
3D Printable Hemp Concrete:
Rheological, Mechanical, and Microstructural Properties
- Bakr Somahi, Cruz Marcos, Mayor-Luque Ricardo (2025-10)
Cura Salad:
Robotic Heated Spatial 3D Printing of Salt-Clay Composites for Health-Oriented Vernacular Architecture
- Elselmy Rowan (2025-10)
AI-Driven Cymatic Architecture:
Integrating Generative AI and Sound Data for 3D Concrete Printed Façade Design
- Marco Giancarlo, Lombardi Davide (2025-10)
A Streamlined Decentralised Workflow for Obtaining Specific Mechanical Performance and Grade of 3DPC:
Towards the Standardisation and Industrialisation of 3DCP
- Mohamed Basem, Ahmad Lina, Carbone Carlo (2025-10)
3D Printing Applications in the GCC Housing Market
- Ke Zhijiang, Li Zichang, Chen Zhengfei, Xu Yao et al. (2025-10)
Technological Advancements and Challenges of Robotic Arm-Based 3D Printing for Hydraulic Tunnel Lining
- Shang Yuqing, Yu Zheming, Ma Wei, Wei Jun et al. (2025-10)
Research on 3D Printing Materials and Printing Parameters of Basalt Fiber Reinforced Concrete
- Ye Fan, Ren Xiaodan (2025-10)
A Eulerian Circuit-Based Reinforcement Learning Path Optimization Method for 3D Concrete Printing
- Barry Mamadou, Jacquet Yohan, Perrot Arnaud (2025-10)
Pocket Vane and Penetrometer as Quality Control Tool for Extrusion 3D Concrete Printing
- Bianco Nicola, Fragnito Andrea, Iasiello Marcello, Mauro Gerardo et al. (2025-10)
Numerical Analysis of a 3D Printed Concrete Envelope Incorporating PCM Nanoparticles
- Jamifar Vahid, Eskandari‐Naddaf Hamid, Dehestani Mehdi (2025-10)
Optimizing Electric Arc Furnace Dust Utilization in 3D Printed Reinforced Cement Paste Using D‐Optimal Design of Experiments and Gray Wolf Optimization
- Jamjala Siva, Thulasirangan Lakshmidevi Manivannan, Reddy K., Kafle Bidur et al. (2025-10)
A Critical Review on Synergistic Integration of Nanomaterials in 3D-Printed Concrete:
Rheology to Microstructure and Eco-Functionality
- Niu Huaxian, Yu Bo, Hao Ji (2025-10)
CFD-Based Flow Field Analysis of Spiral Nozzles in 3D Concrete Printing
- Simwanda Lenganji, David Abayomi, Gatheeshgar Perampalam, Olalusi Oladimeji et al. (2025-10)
Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks
- Foulki Rida, Mesoudy Mouad, Cherkaoui Khalid (2025-10)
Numerical and Theoretical Analysis of Pumping and Extrusion in 3D Concrete Printing
- Couque Pierre, Carneau Paul, Corvez Dominique, Tanant Julien et al. (2025-10)
3D Printed Concrete - Applications for the Industry:
Latest Feedback from France
- Pal Abhipsa, Wan-Wendner Lin (2025-10)
3D Concrete Printing and Infill Patterns of Energy Efficient Structural Wall Elements
- Pfleger Marc-Patrick, Radl Elisabeth, Sam Nina, Vill Markus (2025-10)
3D Concrete Printing of Thin-Walled Load-Bearing Reinforced Structures
- Verma Shilpi, Parghi Anant (2025-10)
Machine Learning-Based Prediction of Compressive Strength in Additive Manufacturing of Concrete Technology
- Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
- Altehaini Zakiah, Dayili Mohammed, Alrajab Meshari, Harbi Adel et al. (2025-10)
Deploying 3D Concrete Printing for Large-Scale Building Construction in Saudi Arabia:
A Case Study
- Apsari Auliagitta, Tambusay Asdam, Suprobo Priyo, Suryanto Benny (2025-10)
Influence of Printing Speed and Nozzle Size on Buildability of 3D Printed Concrete Walls:
A Nonlinear Finite Element Study
- Ball Richard, Dams Barrie, Shepherd Paul, Chen Binling (2025-10)
Exploring Aerial Additive Manufacturing with Cementitious Materials Using Autonomous Drones
- Das Jyotish, Pratama M., Nematollahi Behzad, Guadagnini Maurizio (2025-10)
Durability Performance of 3D-Printed Ultra-High Strength Concrete Incorporating Corrosion Inhibitor
- Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
- Drumond Pedro, Milagres Geysiane, Parassen Paloma, Santos Luana et al. (2025-10)
Assessment of Printing Direction in Flexural Tests of 3D Printed Reinforced Concrete Beams
- Gajjar Parth, Gajjar T., Tangirala Aniruddha, Shrestha Ajad (2025-10)
Advancing 3D Printing in Construction:
Rheological Behaviors of Cementitious Composites with Supplementary Materials
- Kim Yoon-Chul, Han Tong-Seok (2025-10)
Buildability Analysis in 3D Concrete Printing Using Computer Vision and Automated Annotation
- Lange David, Shen Chenyue (2025-10)
Toward Durable 3D Printed Structures
- Raza Ali, Yuan Chengfang (2025-10)
Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
- Sedighi Saeed, Rahai Alireza, Moodi Faramarz (2025-10)
Multi-Criteria Optimization for Sustainable Concrete Mix Considering the Synergistic Effect of Recycled Steel Fiber and LC3 Concrete
- Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
An Interpretable Data-Driven Approach
- Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites
- Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-10)
Next-Generation Net-Zero Composite for Underwater 3D Printing Construction:
Hybrid Machine Learning Optimized LC3 with Recycled Rubber
- Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
- Giulivo Marco, Capozzi Vittorio, Menna Costantino (2025-10)
Experimental and Analytical Assessment of the in-Plane Behaviour of 3D Printed Concrete Walls Subjected to Cyclic Loads
- Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
- Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-10)
3D Concrete Printing:
Pioneering Innovations and Recent Development
- Maierdan Yierfan, Armistead Samuel, Seshadri Akul, Carcassi Olga et al. (2025-10)
Locust Bean Gum–Stabilized Kaolin-Rich Earthen Composites:
From On-Land to Underwater 3D Printing
- Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
- Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
Material Modification and Curing Process Innovation
- Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
- Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk, Seepim Sirakan et al. (2025-10)
Investigation of Out-of-Plane Bending Behaviour of 3D-Printed Reinforced and Unreinforced Walls
- Tanaka Shunsei, Yoshida Kohei, Yamamoto Yujin, Kinomura Koji (2025-10)
Numerical Evaluation on Buildability of 3D Printing Mortar Based on Time-Dependent Material Model
- Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-10)
Design Optimization and Assessment of Stay-in-Place 3D Printed Concrete Formwork for Slabs
- Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
Multi-Material 3D Concrete Printing:
Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
- Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
Experimental Study and Finite Element Analysis
- Xiao Jianzhuang, He Yao, Yu Miao, Wang Changhao et al. (2025-10)
Effects of Pressurized CO2 Mixing on the Properties of Mortar
- Ali Muhammad, Qian Hui, Umar Muhammad, Fenglin Liu et al. (2025-10)
Rheological, Mechanical, and Self-Recovery Performance of 3D-Printed ECC Reinforced with Shape Memory Alloy Fibers
- Boldini Alain, Giwa Ilerioluwa, Kamel Ehsan, Kazemian Ali (2025-10)
Spatiotemporal Temperature Prediction in 3D-Printed Sulfur Concrete for Automated Construction on Earth and Beyond
- Kim Tae, Oh Sangwoo, Lee Jinsuk, Choi Seongcheol et al. (2025-10)
Experimental Data-Driven Framework for Quality Control of 3D-Printed Concrete Permanent Formworks
- Luo Rui, Sun Bin, Fei Xiangpeng, Du Hongjian (2025-10)
Interlayer Strength Loss in 3D Printed Concrete Due to Time-Gap-Induced Macroporosity
- Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
A Review
- Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
A Design Method for Printing-Friendly Structure
- Biernacki Joseph (2025-10)
Sustainability of Additively Manufactured Cement-Based Housing:
What's Our Next Move?
- Gu Yucun, Han Seongho, Khayat Kamal (2025-10)
Effect of Absorption Kinetics of Superabsorbent Polymer on 3D Printing Characteristics
- Han Seongho, Addai-NImoh Alfred, Gu Yucun, Khayat Kamal (2025-10)
Enhanced Shape Stability of Flowable Mortar Through CO2 Injection for 3D Concrete Printing Application
- Kamakshi Tippabhotla, Chau Bao, Tugelbayev Aidyn, McCoy Andrew et al. (2025-10)
Developing 3D Printable Concrete Using Quarry by-Products as Partial Replacement for Cement
- Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
- Lange David, Shen Chuanyue (2025-10)
Modeling the Fresh Properties of Cement-Based Materials for 3D Concrete Printing
- Li Haodao, Khayat Kamal (2025-10)
Performance-Based Design of 3D Printable Cement Composite Using Locally Available Materials
- Lyu Ping, Wang Kejin, Doyle Shelby, Laflamme Simon et al. (2025-10)
Green 3D Printing Concrete Containing Biochar and Waste Wind Turbine Blade Powder
- Marrero-Rosa Raul, Gomaa Shady, Irizarry Elmer, Ahmed Hassan et al. (2025-10)
Additive Manufacturing of Ultra-High-Performance Concrete:
From Mechanical Characterization to Large-Scale Application
- Ozturk Onur, Lunsford Caleb, Nair Sriramya (2025-10)
Advancing Underwater Construction with 3D Printing:
A Two-Stage Approach
- Santhanam Manu (2025-10)
Multi-Scale Assessment of the Structural Performance of 3D Printed Concrete
- Subramaniam Kolluru, Singh Prashant, Maganty Sohanth, Paritala Spandana (2025-10)
Form Optimization Applications of 3D Concrete Printing:
From Bridge to Protective Structures
- Wei Jingjie, Khayat Kamal (2025-10)
Effect of Chemical Additives on Performance of Low-Clinker 3D Printing Mortar
- Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
- Castro-Chincho Ana, Ivorra-Martinez Juan, Perejón Antonio, Sánchez-Jiménez Pedro et al. (2025-10)
3D-Printed Mineral Limestone Structures for Calcium Looping Thermochemical Energy Storage:
Reactivity and Performance Across Cycles
- Mahmood Ali, Nanos Nikos, Begg David, Dhakal Hom (2025-10)
Recycled Waste Materials Utilised in 3D Concrete Printing for Construction Applications:
A Scientometric Review
- Rizzieri Giacomo, Lanteri Federico, Ferrara Liberato, Cremonesi Massimiliano (2025-10)
ShapeGen3DCP:
A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing
- Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-10)
Adaptive Velocity Compensation for Optimal 3D Concrete Printing in Uncontrolled Environments
- Seepim Sirakan, Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk et al. (2025-10)
Effects of Printing Interval Time on the Structural Performance of 3D-Printed Beams Under Four-Point Bending Loads
- Ye Htun Thet, Panuwatwanich Kriengsak, Tanapornraweekit Ganchai, Jongvisuttisun Passarin et al. (2025-10)
Carbon Emission Assessment of 3D Printed Hybrid Modular Concrete Building:
Work Breakdown Structure
- Gonsalves Nicolas, Morgan Ashlei, Thiele Heidi, Olarra Andre et al. (2025-10)
3D Printing of Sustainable Infrastructure Using Rapid-Set Clay Concrete with Biobased Additives
- Miri Zahra, Baaj Hassan, Polak Maria (2025-10)
Exploring Interfaces in 3D-Printed Concrete Through Cohesive Zone Modelling
- Reznik Petro, Volodymyrov Anton, Tenesesku Vladyslav, Firsov Pavlo (2025-10)
Numerical Analysis of 3D-Printed Permanent Formwork in Multi-Story Building Construction