Zhang Yi¶

1. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
   Durability Assessment of 3D Printed Cement-Based Materials:
   A RILEM TC 304-ADC Interlaboratory Study
2. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
   Layer Interface in 3D Printed Cement-Based Materials:
   Heterogeneous Phase Distribution and New Insights into Formation Mechanism
3. Tao Yaxin, Yuan Yong, Zhang Yi, Wangler Timothy (2025-06)
   Pore Structure Analysis of Printcrete Under Varying Temperature
4. Tao Yaxin, Zhang Yi, Mohan Manu, Dai Xiaodi et al. (2025-05)
   Waste-Derived Aggregates in 3D Printable Concrete:
   Current Insights and Future Perspectives
5. Sun Yuhang, Wang Haonan, Zhang Yi, Liu Xiongfei et al. (2025-05)
   Spray-Based 3D Printed Foam Concrete:
   Stress Concentration Relieve Utilization
6. Zhang Bo, Tao Yaxin, Zhang Yi, Shields Yasmina et al. (2025-05)
   Mechanical Properties of 3D Printed Concrete with 2D Infill Patterns Including Print Path Crossings
7. Liu Xiongfei, Guo Pei, Wang Haonan, Zhang Yi (2025-03)
   Spray-Based 3D Printed Cementitious Electromagnetic Wave Absorption Materials:
   Optimization with Structures Design
8. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
   Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
9. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
   Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
10. Zhang Yi, Tittelboom Kim, Tao Yaxin, Zhang Yiyuan et al. (2024-09)
    Understanding Carbonation in 3D Printed Cement-Based Materials with Exposed Bottom Surface
11. Dai Xiaodi, Tao Yaxin, Zhang Yi, Ding Luchuan et al. (2024-08)
    Development of 3D Printable Alkali-Activated Slag-Metakaolin Concrete
12. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
    Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
    An Exploratory Study
13. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
    Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
14. Liu Xiongfei, Zhao Xi, Wang Nan, Zhang Yi et al. (2024-05)
    Powder-Based 3D Printed Magnesium Phosphate Cement:
    Mechanical Isotropy Optimization Using Borax
15. Zhang Yiyuan, Tao Yaxin, Zhang Yi, Tittelboom Kim et al. (2024-04)
    Up-Scaling Active Rheology-Control to Cement-Mortar with the Intervention of an In-Line Magnetic Field
16. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
17. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
    Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
18. Sun Yubo, Mohan Manu, Tao Yaxin, Zhang Yi et al. (2024-02)
    A Conceptual Design of Two-Stream Alkali-Activated Materials
19. Tao Yaxin, Zhang Yi, Schutter Geert, Tittelboom Kim (2024-01)
    Interfacial Bonding of 3D Printable Concrete with Chemically Reactive Coating for Automatic Repair
20. Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
    Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
21. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
    Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
22. Jiang Zhengwu, Yang Qian, Zhu Yanmei, Zhang Yi et al. (2022-03)
    Evaluating the Stiffening Effect of CSA and Sodium Carbonate on the Printability of OPC Mortar
23. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
    Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose