Chen Mingxu¶

1. Jin Yuan, Sun Zhaoyang, Chen Mingxu, Zhou Xiangming et al. (2026-03)
   Predicting the Printability of Cementitious Composites in 3D Printing:
   Relevance Between Rheological Protocols and Structural Deformation
2. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
   Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
3. Jin Yuan, Jiang Chengzhi, Gan Xingyu, Sun Zhaoyang et al. (2025-07)
   Enhancing the Printability of 3D Printed White Cementitious Materials with Accelerators:
   Evolution of Early-Age Hydration and Rheology
4. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
   Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
5. Liu Xuelin, Sheng Haitao, Feng Binqing, Wang Liang et al. (2024-09)
   Development of Novel Alkaline-Electrolyzed-Water on the Properties of 3D Printed Calcium-Sulphoaluminate-Cement Composites
6. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
   Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
7. Zhao Zhihui, Liu Minghao, Kang Aihong, Cai Xianhuan et al. (2024-08)
   Rheology and Buildability of Sustainable 3D Printed Magnesium-Potassium-Phosphate-Cement Composites Incorporating MgO-SiO2-K2HPO4
8. Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
   Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites
9. Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
   Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
10. Jin Yuan, Xu Jiabin, Li Yali, Zhao Zhihui et al. (2022-06)
    Rheological Properties, Shape Stability and Compressive Strength of 3D Printed Colored Cement Composites Modified by Needle-Like Pigment
11. Zhao Zhihui, Chen Mingxu, Jin Yuan, Lu Lingchao et al. (2022-05)
    Rheology-Control Towards 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
12. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
    Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
13. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
    High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
14. Zhao Zhihui, Chen Mingxu, Zhong Xu, Huang Yongbo et al. (2021-07)
    Effects of Bentonite, Diatomite and Metakaolin on the Rheological Behavior of 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
15. Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
    Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
16. Xu Jiabin, Chen Mingxu, Zhao Zhihui, Li Laibo et al. (2021-01)
    Printability and Efflorescence-Control of Admixtures-Modified 3D Printed White Portland-Cement-Based Materials Based on the Response-Surface-Methodology
17. Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
    Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites
18. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
    Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
19. Chen Mingxu, Liu Bo, Li Laibo, Cao Lidong et al. (2020-01)
    Rheological Parameters, Thixotropy and Creep of 3D Printed Calcium-Sulfoaluminate-Cement Composites Modified by Bentonite
20. Chen Mingxu, Li Laibo, Wang Jiaao, Huang Yongbo et al. (2019-10)
    Rheological Parameters and Building Time of 3D Printing Sulphoaluminate-Cement-Paste Modified by Retarder and Diatomite
21. Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
    Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste
22. Chen Mingxu, Li Laibo, Zheng Yan, Zhao Piqi et al. (2018-09)
    Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials