Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials (2018-09)¶
10.1016/j.conbuildmat.2018.09.037
, Li Laibo, Zheng Yan, , ,
Journal Article - Construction and Building Materials, Vol. 189, pp. 601-611
Abstract
3D printing for cement-based material is recently supposed to be the rapidly and innovative forming technology in the building industry. This paper is concentrated on the rheological and mechanical properties of hydroxypropyl methyl cellulose (HPMC), water-reducing agent (WRA) and lithium carbonate (Li2CO3) modified 3D printing sulphoaluminate cementitious materials based on the extrusion system of3D printing. Experimental results show that HPMC notably increases the stress and viscosity of cement paste and the plastic viscosity need to reach 1.650 2.538 Pas for the build-up of 3D structures. While the cement paste with WRA and Li2CO3 present low shear stress and apparent viscosity. Furthermore, the setting time and rheological properties of 3D printing cement paste with hybrid admixtures are investigated using response surface methodology (RSM). The optimal hybrid additions of admixtures enable the 3D printing paste to achieve a favorable deformation rate and higher compressive strength. In conclusion, utilization of admixtures has a great potential to develop 3D printing sulphoaluminate cementitious materials used in buildings, which can effectively control the printable properties and rheological behaviors.
¶
12 References
- Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
Mechanical Properties of Structures 3D Printed with Cementitious Powders - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Hambach Manuel, Volkmer Dirk (2017-02)
Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste - Ketel Sabrina, Falzone Gabriel, Wang Bu, Washburn Newell et al. (2018-04)
A Printability Index for Linking Slurry Rheology to the Geometrical Attributes of 3D Printed Components - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Ma Guowei, Li Zhijian, Wang Li (2017-12)
Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing - Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques - Soltan Daniel, Li Victor (2018-03)
A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing - Xu Jie, Ding Lieyun, Love Peter (2017-01)
Digital Reproduction of Historical Building Ornamental Components:
From 3D Scanning to 3D Printing - Zareiyan Babak, Khoshnevis Behrokh (2017-08)
Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
117 Citations
- Xie Fan, Hu Hailong, Deng Yang, Wang Dong et al. (2026-04)
Development of Heat-Triggered Sulfate Capsule for on-Demand Setting 3D Printing Phosphogypsum-Based Cement - Jin Yuan, Sun Zhaoyang, Chen Mingxu, Zhou Xiangming et al. (2026-03)
Predicting the Printability of Cementitious Composites in 3D Printing:
Relevance Between Rheological Protocols and Structural Deformation - Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder - Feng Hu, Yuan Xiang, Yu Zhenyu, Guo Aofei et al. (2025-12)
Printability and Rheological Properties of 3D Printing Ultra-High Ductility Magnesium Phosphate Cement-Based Composites - Adeel Muhammad (2025-11)
Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
A Comprehensive Review - Türk Ayşe, Türk Furkan, Edebali Serpil, Keskin Ülkü (2025-11)
3D Printable Mortars with Green Materials:
Sustainable Solutions with Nanocellulose - Wang Cheinfei, Lian Junyin, Fang Yunhui, Fan Guangming et al. (2025-08)
Rheological Optimization of 3D-Printed Cementitious Materials Using Response Surface Methodology - Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete - Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing - Jin Yuan, Jiang Chengzhi, Gan Xingyu, Sun Zhaoyang et al. (2025-07)
Enhancing the Printability of 3D Printed White Cementitious Materials with Accelerators:
Evolution of Early-Age Hydration and Rheology - Gerges Isabelle, Farraj Faten, Youssef Nicolas, Antczak Emmanuel et al. (2025-07)
Methodologies to Design Optimum 3D Printable Mortar Mix:
A Review - Zafar Muhammad, Javadnejad Farid, Hojati Maryam (2025-07)
Optimizing Rheological Properties of 3D Printed Cementitious Materials via Ensemble Machine Learning - Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate - Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
3D Printing of Conventional and Geopolymer Concretes:
Advancements, Challenges, Future Directions, and Cost Analysis - Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
A Review - Huang Jianxiang, Wang Caifeng, Jian Shouwei, Tan Hongbo et al. (2025-04)
Feasibility of Applying Attapulgite, Sodium Bentonite and Nano-Silica as a Viscosity Modifier Admixture for 3D Printing of Gypsum-Based Materials - Cao Xiangpeng, Cui Hongzhi (2025-04)
Simple Floor Nail Placement Technique to Reinforce 3D-Printed Concrete:
An Experimental Investigation - Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete - Li Leo, Zhang Guang-Hu, Kwan Albert (2025-01)
Exploring Submarine 3D Printing:
Enhancing Washout-Resistance and Strength of 3D Printable Mortar - Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar - Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties - Cao Xiangpeng, Wu Shuoli, Cui Hongzhi (2024-12)
Experimental Study on In-Situ Mesh Fabrication for Reinforcing 3D Printed Concrete - Wang Qingwei, Han Song, Liu Qi, Yang Junhao et al. (2024-12)
Research on the 3D Printing Process and Filament Shape of Cementitious Materials in Low Gravity - Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
Materials, Engineered Properties and Techniques for Additive Manufacturing - Lu Haoyu, Zhang Lizhi, Wang Junkai, Shi Zhaoxin et al. (2024-11)
Penetration-Test of Sheet-Like Indenter for Yield-Stress-Assessment of 3D Printed Concrete - Wang Qingwei, Han Song, Yang Junhao, Li Ziang et al. (2024-11)
Optimizing Printing and Rheological Parameters for 3D Printing with Cementitious Materials - Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete - Mousavi Seyed, Ahmadi Khatereh, Dehestani Mehdi (2024-11)
Fire Response of 3D Printed Concrete - Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam - Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites - Gao Jianhao, Wang Chaofeng, Li Jiaqi, Chu S. (2024-09)
Data-Driven Rheological-Model for 3D Printable Concrete - Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2024-08)
Design and Development of a Small-Scale Cement-Based 3D Printing Robot Extrusion Nozzle - Li Leo, Zhang Guang-Hu (2024-08)
Feasibility of Underwater 3D Printing:
Effects of Anti-Washout-Admixtures on Printability and Strength of Mortar - Asghari Y., Mohammadyan-Yasouj S., Petrů M., Ghandvar H. et al. (2024-07)
3D Printing and Implementation of Engineered Cementitious Composites:
A Review - Shao Lijing, Liu Zhaolong, Liu Qi, Wang Haochuan et al. (2024-07)
A New Strategy to Enhance 3D Printability of Cement-Based Materials:
In-Situ Polymerization - Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete - Chen Anguo, Dai Pengfei, Lyu Qifeng (2024-05)
Effect of Alkalized Straw-Fibers on the Properties of Three Dimensional Printed Cementitious Composite - Wei Ying, Han Song, Yu Shiwei, Chen Ziwei et al. (2024-05)
Parameter Impact on 3D Concrete Printing from Single to Multi-Layer Stacking - Yang Liuhua, Gao Yang, Chen Hui, Jiao Huazhe et al. (2024-04)
3D Printing Concrete Technology from a Rheology Perspective:
A Review - Wei Ying, Han Song, Chen Ziwei, Lu Jianxian et al. (2024-04)
Numerical Simulation of 3D Concrete Printing Derived from Printer Head and Printing Process - Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites - Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites - Eugenin Claudia, Cuevas Villalobos Karla, Navarrete Iván (2023-12)
Temperature-Dependance of 3D Printed Concrete Produced with Copper-Tailings - Šána Vladimír, Litoš Jiří, Kolář Karel (2023-10)
Mechanical Properties of the New Cement Composite Mixture Appropriate for Robotic Processing - Zhang Xiaowei, Guo Chuwen, Ma Jianhong, Jiao Huazhe et al. (2023-10)
Utilization of Solid Mine-Waste in the Building Materials for 3D Printing - Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
From Analytical Modelling to Numerical Simulation - Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology - Chang Ze, Liang Minfei, Chen Yu, Schlangen Erik et al. (2023-09)
Does Early-Age Creep Influence Buildability of 3D Printed Concrete?:
Insights from Numerical Simulations - Rudziewicz Magdalena, Maroszek Marcin, Góra Mateusz, Dziura Paweł et al. (2023-09)
Feasibility Review of Aerated Materials Application in 3D Concrete Printing - Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control - Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2023-08)
Experimental Study of the In-Situ Rebar-Splicing-Technique to Reinforce 3D Printed Concrete in Vertical Directions - Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2023-07)
In-Situ Coating Technique for Rebar Installation for 3D Printed Reinforced Concrete - Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-07)
Peridynamic Buildability-Analysis of 3D Printed Concrete Including Damage, Plastic Flow and Collapse - Ungureanu Dragoș, Onuțu Cătălin, Isopescu Dorina, Țăranu Nicolae et al. (2023-06)
A Novel Approach for 3D Printing Fiber-Reinforced Mortars - Shenawa Amaal, Karoti Poonam (2023-06)
3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review - Shahzad Qamar, Li Fangyuan (2023-05)
The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
A Novel Approach for Practical Applications - Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
Off-Site Construction with 3D Concrete Printing - Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay - Bhushan Jindal Bharat, Jangra Parveen (2023-05)
3D Printed Concrete:
A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications - Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers - Fonseca Mariana, Matos Ana (2023-03)
3D Construction Printing Standing for Sustainability and Circularity:
Material-Level Opportunities - Geng Songyuan, Luo Qiling, Liu Kun, Li Yunchao et al. (2023-02)
Research Status and Prospect of Machine Learning in Construction 3D Printing - Chen Yu, Liang Minfei, Zhang Yu, Li Zhenming et al. (2023-02)
Can Superabsorbent Polymers Be Used as Rheology-Modifiers for Cementitious Materials in the Context of 3D Concrete Printing - Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment - Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions - Fan Lei, Ji Xiaohan, Wu Chengtao, Zhang Wang et al. (2023-01)
Unlocking Toughness in 3D-Printed Cement Through Bio-Inspired Designs:
Current Status and Future Perspectives - Ahmed Ghafur (2023-01)
A Review of 3D Concrete Printing:
Materials and Process Characterization, Economic Considerations and Environmental Sustainability - Zhang Nan, Sanjayan Jay (2023-01)
Extrusion Nozzle Design and Print Parameter Selections for 3D Concrete Printing - Peng Yiming, Unluer Cise (2022-12)
Development of Alternative Cementitious Binders for 3D Printing Applications:
A Critical Review of Progress, Advantages and Challenges - Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features - Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete - Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2022-09)
Aerial Additive Manufacturing with Multiple Autonomous Robots - Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
Toward 3D Printable Engineered Cementitious Composites:
Mix-Design Proportioning, Flowability, and Mechanical Performance - Xu Weiguo, Huang Shuyi, Han Dong, Zhang Zhiling et al. (2022-08)
Toward Automated Construction:
The Design-to-Printing Workflow for a Robotic In-Situ 3D Printed House - Kaliyavaradhan Senthil, Ambily Parukutty, Prem Prabhat, Ghodke Swapnil (2022-08)
Test-Methods for 3D Printable Concrete - Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
3D Concrete Printing:
Lattice Modeling of Structural Failure considering Damage and Deformed Geometry - Yuan Qiang, Xie Zonglin, Yao Hao, Huang Tingjie et al. (2022-06)
Effect of Polyacrylamide on the Workability and Inter-Layer Interface Properties of 3D Printed Cementitious Materials - Cao Xiangpeng, Yu Shiheng, Zheng Dapeng, Cui Hongzhi (2022-06)
Nail-Planting to Enhance the Interface Bonding Strength in 3D Printed Concrete - Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
A Review - Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
A Systematic Literature Review - Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge - Zhi Peng, Wu Yuching, Yang Qianfan, Kong Xiangrui et al. (2022-03)
Effect of Spiral Blade Geometry on 3D Printed Concrete Rheological Properties and Extrudability Using Discrete Event Modeling - Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation - Filho Fernando, Chen Yu, Çopuroğlu Oğuzhan (2022-03)
Nano-Modification in Digital Manufacturing of Cementitious Composites - Jiang Zhengwu, Yang Qian, Zhu Yanmei, Zhang Yi et al. (2022-03)
Evaluating the Stiffening Effect of CSA and Sodium Carbonate on the Printability of OPC Mortar - Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2022-02)
Experimental Investigation on Inner- and Inter-Strip Reinforcements for 3D Printed Concrete via Automatic Staple Inserting Technique - Eugenin Claudia, Navarrete Iván, Brevis Wernher, Lopez Mauricio (2022-02)
Air-Bubbles as an Admixture for Printable Concrete:
A Review of the Rheological Effect of Entrained Air - Cho Seung, Rooyen Algurnon, Kearsley Elsabe, Zijl Gideon (2021-12)
Foam Stability of 3D Printable Foamed Concrete - Şahin Hatice, Mardani Ali (2021-12)
Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
A State of the Art Review - Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing - Shahzad Qamar, Shen Junyi, Naseem Rabia, Yao Yonggang et al. (2021-10)
Influence of Phase-Change-Material on Concrete Behavior for Construction 3D Printing - Hou Shaodan, Xiao Jianzhuang, Duan Zhenhua, Ma Guowei (2021-10)
Fresh Properties of 3D Printed Mortar with Recycled Powder - Zhang Nan, Xia Ming, Sanjayan Jay (2021-10)
Short-Duration Near-Nozzle Mixing for 3D Concrete Printing - Munir Qaisar, Peltonen Riku, Kärki Timo (2021-08)
Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams - Liu Chenkang, Yue Songlin, Zhou Cong, Sun Honglei et al. (2021-08)
Anisotropic Mechanical Properties of Extrusion-Based 3D Printed Layered Concrete - Zhao Zhihui, Chen Mingxu, Zhong Xu, Huang Yongbo et al. (2021-07)
Effects of Bentonite, Diatomite and Metakaolin on the Rheological Behavior of 3D Printed Magnesium-Potassium-Phosphate-Cement Composites - Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing - Rehman Atta, Kim Jung-Hoon (2021-07)
3D Concrete Printing:
A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics - Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review - Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
Rheological, Thermal and Mechanical Properties - Kilic Ugur, Jiang Zhangfan, Ma Ji, Ozbulut Osman (2021-03)
Printability Characterization of Graphene-Reinforced Cementitious Composites - Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments - Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
A Review - Xu Jiabin, Chen Mingxu, Zhao Zhihui, Li Laibo et al. (2021-01)
Printability and Efflorescence-Control of Admixtures-Modified 3D Printed White Portland-Cement-Based Materials Based on the Response-Surface-Methodology - Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
Improving Performance of Additive Manufactured Concrete:
A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods - Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites - Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
A Review of 3D Printed Concrete:
Performance-Requirements, Testing Measurements and Mix-Design - Singh P., Sreerag K. (2020-12)
Additive Manufacturing Through Digital Concrete by Extrusion- and Non-Extrusion-Method - Afarani Hajar, Carroll William, Garboczi Edward, Biernacki Joseph (2020-11)
Designing 3D Printable Cementitious Materials with Gel-Forming Polymers - Khan Mohammad, Sanchez Florence, Zhou Hongyu (2020-04)
3D Printing of Concrete:
Beyond Horizons - Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up - Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites - Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture - Li Zhijian, Wang Li, Ma Guowei (2020-01)
Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions - Chen Mingxu, Liu Bo, Li Laibo, Cao Lidong et al. (2020-01)
Rheological Parameters, Thixotropy and Creep of 3D Printed Calcium-Sulfoaluminate-Cement Composites Modified by Bentonite - Chen Mingxu, Li Laibo, Wang Jiaao, Huang Yongbo et al. (2019-10)
Rheological Parameters and Building Time of 3D Printing Sulphoaluminate-Cement-Paste Modified by Retarder and Diatomite - Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing
BibTeX
@article{chen_li_zhen_zhao.2018.RaMPoAM3PSCM,
author = "Mingxu Chen and Laibo Li and Yan Zheng and Piqi Zhao and Lingchao Lu and Xin Cheng",
title = "Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials",
doi = "10.1016/j.conbuildmat.2018.09.037",
year = "2018",
journal = "Construction and Building Materials",
volume = "189",
pages = "601--611",
}
Formatted Citation
M. Chen, L. Li, Y. Zheng, P. Zhao, L. Lu and X. Cheng, “Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials”, Construction and Building Materials, vol. 189, pp. 601–611, 2018, doi: 10.1016/j.conbuildmat.2018.09.037.
Chen, Mingxu, Laibo Li, Yan Zheng, Piqi Zhao, Lingchao Lu, and Xin Cheng. “Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials”. Construction and Building Materials 189 (2018): 601–11. https://doi.org/10.1016/j.conbuildmat.2018.09.037.