Skip to content

2023-09

  1. Mallikarjuna Balichakra, Hareeswar M., Sharath P. (2023-09)
    Applications of Additive Manufacturing in Construction and Building Industries
  2. Routray Krutika, Saha Sunirmal (2023-09)
    The Economic Impact of Additive Manufacturing Industries
  3. Li Shuai, Lan Tian, Mendis Priyan, Tran Jonathan (2023-09)
    Robotics in 3D Concrete Printing:
    Current Progress & Challenges
  4. Lv Zhenyuan, Xiao Jianzhuang, Duan Zhenhua, Tang Yuxiang (2023-09)
    Time-Dependent Evolution and Strength Modulation of 3D Printed Concrete Pore-Structure Based on Microbial Remediation
  5. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
    Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
  6. Slepicka Martin, Mawas Karam, Borrmann André, Maboudi Mehdi et al. (2023-09)
    Digital Twinning in Additive Manufacturing:
    Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models
  7. Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-09)
    Flexural Toughness of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
  8. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
    A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
    From Analytical Modelling to Numerical Simulation
  9. David Martin, Freund Niklas, Dröder Klaus, Lowke Dirk (2023-09)
    The Effects of Nozzle-Diameter and Length on the Resulting Strand Properties for Shotcrete 3D Printing
  10. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2023-09)
    Automatic Detection and Isolation of Filament-Width-Deviation During 3D Printing of Recycled Construction-Material
  11. Beckers Jakob, Kalthoff Matthias, Cruz Cynthia, Matschei Thomas (2023-09)
    Possibilities of Extrusion-Production in Concrete Construction
  12. Zhang Sisi, Kalus Matthias, Engel Sven, Claßen Martin (2023-09)
    Entwicklung praxisorientierter Methoden für den 3D Druck des Verbundwerkstoffs Stahlbeton
  13. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2023-09)
    Anisotropic Properties of Additively Manufactured Concrete Elements
  14. Živković Milijana, Žujović Maša, Milošević Jelena (2023-09)
    Architectural 3D Printed Structures Created Using Artificial Intelligence:
    A Review of Techniques and Applications
  15. Straßer Alexander, Riegger Felix, Hamilton Leigh, Kränkel Thomas et al. (2023-09)
    Selective Paste-Intrusion:
    Integration of Reinforcement by WAAM
  16. Wu Huanyu, Liu Yongqi, Chang Ruidong, Wu Lingyi (2023-09)
    Research Status Quo and Trends of Construction Robotics:
    A Bibliometric Analysis
  17. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
    Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
  18. Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
    3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
    A Durable, Sustainable and Cost-Competitive Product?
  19. Breseghello Luca, Talaei Ardeshir, Florenzano Daniele, Naboni Roberto (2023-09)
    Shape-Env:
    Camera-Enhanced Robotic Terrain-Shaping for Complex 3D Concrete Printing
  20. Conrad John, Spencer Lawson, Amador Robert, Linnehan Tyler et al. (2023-09)
    Concrete Printed Gyroid Column:
    A Structurally Optimized, Sand Layer Supported Printing Method
  21. Coskun Agit, Jensen Mads (2023-09)
    Integrating Additional Elements in Clay 3D Printing with Human Intervention
  22. Coward Andy, Sørensen Jesper (2023-09)
    MINIMASS:
    A New Approach for Low-Carbon, Low-Cost 3D Printed Concrete Beams
  23. Fleckenstein Julia, Bertagna Federico, Piccioni Valeria, Fechner Mareen et al. (2023-09)
    Revisiting Breuer Through Additive Manufacturing:
    Passive Solar-Control-Design-Strategies for Bespoke Concrete Building Envelope Elements
  24. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2023-09)
    Effect of Nano-Clay on the Printability of Extrusion-Based 3D Printable Mortar
  25. Vele Jiří, Kurilla Lukáš, Achten Henri (2023-09)
    Improving Buildability of Overhangs of 3D Printed Objects Through Non-Planar Slicing Informed by Force-Flow-Analysis
  26. Wolf Alexander, Carvalho João, Figueiredo Bruno, Cruz Paulo et al. (2023-09)
    Support-Strategies for Robocasting Ceramic Building Components
  27. Zamani Alireza, Mohseni Alale, Çapunaman Özgüç (2023-09)
    Reconfigurable Formwork System for Vision-Informed Conformal Robotic 3D Printing
  28. Khademi Pooria, Toufigh Vahab (2023-09)
    Data-Driven-Based Ultrasonics-Analysis for Evaluating the Bond-Strength of Concrete-Layers
  29. Meng Qingcheng, Hu Lei, Li Mingjian, Qi Xin (2023-09)
    Assessing the Environmental Impact of Building Life Cycle:
    A Carbon-Reduction-Strategy Through Innovative Design, Intelligent Construction, and Secondary Utilization
  30. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-09)
    Rapid Early-Age Strength Development of In-Line Activated Geopolymer for Concrete 3D Printing
  31. Saadati Farzaneh, Kani Ebrahim (2023-09)
    Phosphorous Slag-Based Geopolymer Cement Incorporate with Mullite for 3D Printing Application
  32. Asensio Javier, Josa Irene, Monserrat Andrea, Fuente Albert (2023-09)
    3D‐Printed Concrete Footbridges:
    An Approach to Assess the Sustainability Performance
  33. Chang Ze, Liang Minfei, He Shan, Schlangen Erik et al. (2023-09)
    Lattice-Modelling of Early-Age Creep of 3D Printed Segments with the Consideration of Stress-History
  34. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
    3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
  35. Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
    The State of the Art in Digital Construction of Clay Buildings:
    Reviews of Existing Practices and Recommendations for Future Development
  36. Zhang Huan, Cao Shuai, Yilmaz Erol (2023-09)
    Polymer Shape Effect on Damage-Evolution, Internal Defects and Crack Propagation of 3D Printed Polymer-Based Cementitious Backfill
  37. Ingle Vaibhav, Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan (2023-09)
    3D Printable Concrete Without Chemical Admixtures:
    Fresh and Hardened Properties
  38. Jauk Julian, Gosch Lukas, Vašatko Hana, Königsberger Markus et al. (2023-09)
    Filament-Reinforced 3D Printing of Clay
  39. Bayat Hamid, Kashani Alireza (2023-09)
    Analysis of Rheological Properties and Printability of a 3D Printing Mortar Containing Silica-Fume, Hydrated Lime, and Blast-Furnace-Slag
  40. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
    Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
  41. Jewett Jackson, Carstensen Josephine (2023-09)
    Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding
  42. Kogai A., Puzatova (nee Sharanova) Anastasiia, Dmitrieva Maria (2023-09)
    Modification of Fine Multicomponent Concrete with Activated Component-Based Additive
  43. Liu Dawei, Zhang Zhigang, Zhang Xiaoyue, Chen Zhaohui (2023-09)
    3D Printing Concrete Structures:
    State of the Art, Challenges, and Opportunities
  44. Moelich Migael, Zijl Gideon, Villiers Wibke (2023-09)
    Thermal Performance of Cavities in 3DPC Building Façades
  45. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
    Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
  46. Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
    Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete
  47. Yin Yunchao, Huang Jian, Wang Tiezhu, Yang Rong et al. (2023-09)
    Effect of Hydroxypropyl-Methylcellulose on Rheology and Printability of the First Printed Layer of Cement Activated Slag-Based 3D Printing Concrete
  48. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
    Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  49. Ingle Vaibhav, Prem Prabhat, Ramamurthy Vignesh, Ravichandran Darssni (2023-09)
    Acoustic Emission Characterization of 3D Printed Ultra-High-Performance Concrete Beams Under Bending
  50. Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
    Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete
  51. Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
    Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
  52. Rymeš Jiří, Červenka Jan, Jendele Libor (2023-09)
    Material-Modelling and Simulation of 3D Concrete Printing Process
  53. Saravanan Pradeep, Ramaswamy Ananth (2023-09)
    Numerical Investigation on Inter-Layer and Filament Fracture Behavior of 3D Printed Concrete
  54. Chang Ze, Liang Minfei, Chen Yu, Schlangen Erik et al. (2023-09)
    Does Early-Age Creep Influence Buildability of 3D Printed Concrete?:
    Insights from Numerical Simulations
  55. Li Te, Tier Laire (2023-09)
    Analysis of the Effect of Glass-Powder on the Printability of Cement-Based Materials for 3D Printing Using ImageJ
  56. Mohsen Mohamed, Diseet Malak, Aburumman Mervat, Taha Ramzi et al. (2023-09)
    3D Printed Clay Enhanced with Graphene-Nano-Platelets for Sustainable and Green Construction
  57. Hu Hailong, Huang Jian, Wang Tiezhu, Manuka Mesfin et al. (2023-09)
    Impact of Calcium Sulfoaluminate Cement on Printability and Early Strength Development of a Slag-Based 3D Printing Cementitious Material
  58. Ji Xuping, Pan Tinghong, Liu Xingyao, Zhao Wenhao et al. (2023-09)
    Characterization of Thixotropic Properties of Fresh Cement‐Based Materials
  59. Polychronopoulos Nickolas, Sarris Ioannis, Benos Lefteris, Vlachopoulos John (2023-09)
    Pressure-Drop in Converging Flows in Three-Dimensional Printing of Concrete
  60. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
    Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
    A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
  61. Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
    Solid Waste-Based Set-on-Demand 3D Printed Concrete:
    Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
  62. Ji Yameng, Poullain Philippe, Leklou Ali (2023-09)
    The Selection and Design of Earthen Materials for 3D Printing
  63. Jia Zijian, Zhang Zedi, Jia Lutao, Cao Ruilin et al. (2023-09)
    Effect of Different Expansive Agents on the Early-Age Structural Build-Up Process of Cement-Paste
  64. Li Leo, Xiao Bofeng, Cheng Cong-Mi, Xie Hui-Zhu et al. (2023-09)
    Adding Glass-Fibers to 3D Printable Mortar:
    Effects on Printability and Material-Anisotropy
  65. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
  66. Dörrie Robin, Freund Niklas, Herrmann Eric, Baghdadi Abtin et al. (2023-09)
    Automated Force-Flow-Oriented Reinforcement Integration for Shotcrete 3D Printing
  67. Jendele Libor, Rymeš Jiří, Červenka Jan (2023-09)
    Optimizing Digital 3D Printing of Concrete Structures
  68. Kulkarni Omkar, Thakur Manideep, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
    Evaluation of Tensile Behavior of 3D Printed Concrete Assemblies with Reinforcement
  69. Lehr Leonard, Rasanani Mahdieh, Rasehorn Inken (2023-09)
    3D Concrete Printing of Wall Elements with Integrated Multifunctional Cavities
  70. Liu Xiaoshuang, Zou Yuxiao, Wu Yingxuan, Cui Dong et al. (2023-09)
    The Effect of U-Type Expanding Agent for Concrete (UEA) on the Microstructural and Mechanical Properties of Mortar Fabricated Through Alternate 3D Printing
  71. Matos Ana (2023-09)
    Waste Marble Valorisation in 3D Cementitious Materials Printing
  72. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
  73. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
    Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
  74. Thakur Manideep, Kulkarni Omkar, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
    Influence of Cold Joint on Fracture Behavior of 3D Printed Concrete
  75. Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-09)
    Non-Destructive Tests to Evaluate the Self-Healing Capacity for a 3D Printing ECC Material
  76. Mawas Karam, Maboudi Mehdi, Gerke Markus (2023-09)
    Filament Extraction in 3D Printing of Shotcrete Walls from Terrestrial Laser Scanner Data
  77. Luo Fuming, Cui Peng, Tang Wei, Wu Chun-ran et al. (2023-09)
    Influences of Engineering Spoil on the Properties and Microstructure of 3D Printable Magnesium-Cement
  78. Quah Tan, Vo Tran, Tay Yi, Tan Ming et al. (2023-09)
    Real-Time-Assessment of Smart Concrete Inspection with Piezoelectric Sensors
  79. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
    Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
  80. Mader Thomas, Schreter-Fleischhacker Magdalena, Shkundalova Olena, Neuner Matthias et al. (2023-09)
    Constitutive Modeling of Orthotropic Non-Linear Mechanical Behavior of Hardened 3D Printed Concrete
  81. Rudziewicz Magdalena, Maroszek Marcin, Góra Mateusz, Dziura Paweł et al. (2023-09)
    Feasibility Review of Aerated Materials Application in 3D Concrete Printing
  82. Shahzad Qamar, Li Fangyuan (2023-09)
    An Innovative Method for Buildability-Assessment of 3D Printed Concrete at Early-Ages
  83. Otto Jens, Mischke Janik (2023-09)
    Operational and Occupational Safety When Using Automated Manufacturing Processes on Construction Sites:
    Consideration of Current Legal and Technical Framework Conditions