Skip to content

Liu Zhenbang

Information

ORCID
0000-0002-3250-206X
First Contribution
2023-05-08
Last Contribution
2026-01-08
Number Contributions
10
Number Citations
58

Top Co-Authors

  1. Li Mingyang (10)
  2. Wong Teck (10)
  3. Tan Ming (9)
  4. Wang Xiangyu (6)
  5. Wang Sizhe (4)

Top Cited Articles

  1. Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
    Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application (15)

Persons This Author Cites the Most

  1. Tan Ming (33)
  2. Li Mingyang (25)
  3. Ma Guowei (23)
  4. Weng Yiwei (23)
  5. Wang Li (22)

Persons This Author Is Cited Most By

  1. de Corte Wouter (3)
  2. Ooms Ticho (3)
  3. Wan-Wendner Roman (3)
  4. Zhang Bo (3)
  5. Tan Ming (2)

  1. Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
    Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
    Technique Development and Bond Behavior Characterization
  2. Liu Zhenbang, Li Mingyang, Wang Sizhe, Deng North et al. (2026-01)
    Investigation on Bond-Slip Performance of Steel Rebar Embedded in Concrete Confined by 3D Concrete Printing Formwork
  3. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
  4. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
    Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
  5. Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
    3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
    Mechanical and Acoustic Insulation Properties
  6. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
    Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
  7. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
    Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
  8. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
    Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
  9. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
    Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
  10. Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
    Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application