2022-11
- Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
Modelling of 3D Concrete Printing Process:
A Perspective on Material and Structural Simulations
- Rubin Ariane, Quintanilha Lucas, Repette Wellington (2022-11)
Influence of Structuration-Rate, with Hydration-Accelerating Admixture, on the Physical and Mechanical Properties of Concrete for 3D Printing
- Kulaienko Oleh, Kabus Oleksii (2022-11)
3D Concrete Printing Technology:
Implementing Tasks in Ukraine
- Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
- Roux Charlotte, Kuzmenko Kateryna, Roussel Nicolas, Mesnil Romain et al. (2022-11)
Life Cycle Assessment of a Concrete 3D Printing Process
- Jenny Ercan, Pietrasik Lukasz, Sounigo Eliott, Tsai Ping-Hsun et al. (2022-11)
Continuous Mobile Thin-Layer On-Site Printing
- Jiang Jinyang, Zheng Chaolang, Wang Fengjuan, Xu Wenxiang et al. (2022-11)
Novel 3D Printing Phase-Change-Aggregate-Concrete:
Mechanical and Thermal Properties Analysis
- Li Chao, Zahedi Ata, Petzold Frank (2022-11)
Pragmatic Design Decision Support for Additive Construction Using Formal Knowledge and Its Prospects for Synergy with a Feedback Mechanism
- Senthilnathan Shanmugaraj, Raphael Benny (2022-11)
Using Computer-Vision for Monitoring the Quality of 3D Printed Concrete Structures
- Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2022-11)
CFD Modelling of Mortar-Extrusion and Path-Planning-Strategy at the Corner for 3D Concrete Printing
- Zhou Yiyi, Jiang Dan, Sharma Rahul, Xie Yi et al. (2022-11)
Enhancement of 3D Printed Cementitious Composite by Short Fibers:
A Review
- Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
- Kamel Ehsan, Kazemian Ali (2022-11)
BIM-Integrated Thermal Analysis and Building Energy Modeling in 3D Printed Residential Buildings
- Yoris-Nobile Adrian, Slebi-Acevedo Carlos, Lizasoain-Arteaga Esther, Indacoechea-Vega Irune et al. (2022-11)
Artificial Reefs Built by 3D Printing:
Systematisation in the Design, Material-Selection and Fabrication
- Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2022-11)
Criticality of Binder-Aggregate Interaction for Buildability of 3D Printed Concrete Containing Limestone-Calcined-Clay
- Lee Chang-Hwan, Gwak Kwan-Woong (2022-11)
Design of a Novel Cable-Driven Parallel Robot for 3D Printing Building Construction
- Wang Lining, Aslani Farhad (2022-11)
Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
- Puzatova (nee Sharanova) Anastasiia, Shakor Pshtiwan, Laghi Vittoria, Dmitrieva Maria (2022-11)
Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer:
A Review
- Rech Arianna, Chiujdea Ruxandra-Stefania, Colmo Claudia, Rossi Gabriella et al. (2022-11)
Waste-Based Biopolymer-Slurry for 3D Printing Targeting Construction Elements
- Teixeira João, Schaefer Cecília, Rangel Bárbara, Maia Lino et al. (2022-11)
A Road Map to Find in 3D Printing a New Design Plasticity for Construction:
The State of Art
- Arunothayan Arun, Nematollahi Behzad, Khayat Kamal, Ramesh Akilesh et al. (2022-11)
Rheological Characterization of Ultra-High-Performance Concrete for 3D Printing
- Dahlenburg Maximilian, Hechtl Christian, Matthäus Carla, Fottner Johannes (2022-11)
3D Concrete Printing:
Graded Concrete-Extrusion
- Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
- Melichar Jindřich, Žižková Nikol, Brožovský Jiří, Mészárosová Lenka et al. (2022-11)
Study of the Interaction of Cement-Based Materials for 3D Printing with Fly-Ash and Superabsorbent Polymers
- Christen Heidi, Cho Seung, Zijl Gideon, Villiers Wibke (2022-11)
Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
- Liu Zhixin, Li Mingyang, Wong Teck (2022-11)
Investigations of Nozzle-Configuration and Process Parameters on Porosity Formation of the 3D Printed Structure
- Baek Seoung-Ho, Yang Jung-Ho, Ha Cheol-Woo, Shim Patrick et al. (2022-11)
Design and Evaluation of Additive Manufactured Highly Efficient Inclined-Wing-Type Continuous Mixer
- Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
- Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
- Strohle Max, Sadique Monower, Dulaimi Anmar, Kadhim Mustafa (2022-11)
Prospect and Barrier of 3D Concrete:
A Systematic Review
- Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
- Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2022-11)
Reinforcements in 3D Printing Concrete Structures
- Yue J., Beskos Dimitrios, Feng C., Wu Kai (2022-11)
Hardened Fracture Characteristics of Printed Concrete Using Acoustic Emission Monitoring Technique
- Mesnil Romain, Poussard Valentin, Sab Karam, Caron Jean-François (2022-11)
On the Geometrical Origin of the Anisotropy in Extrusion-Based 3D Printed Structures
- Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
- Ahadi Bahram, Valiente López María (2022-11)
Use of Nitinol-Shape Memory Alloy in the Reinforcement of 3D Concrete Printing Industry
- Goracci Guido, Salgado David, Gaitero Juan, Dolado Jorge (2022-11)
Electrical Conductive Properties of 3D Printed Concrete Composite with Carbon Nanofibers
- Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-11)
Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing:
Correction
- Ma Zongfang, Wan Weipeng, Song Lin, Liu Chao et al. (2022-11)
An Approach of Path-Optimization Algorithm for 3D Concrete Printing Based on Graph-Theory
- Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
A Novel Reinforcing Approach
- Liu Kewei, Meng Qingfei, Kong Qingzhao, Zhang Xihong (2022-11)
Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction
- Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
Experimental and Numerical Approaches
- Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
A Critical Review
- Tanapornraweekit Ganchai, Jiramarootapong Patiphat, Paudel Satish, Tangtermsirikul Somnuk et al. (2022-11)
Experimental and Numerical Investigation of 3D Printed Mortar Walls Under Uniform Axial Compression
- Li Shuai, Nguyen-Xuan Hung, Tran Jonathan (2022-11)
Digital Design and Parametric Study of 3D Concrete Printing on Non-Planar Surfaces
- Lachmayer Lukas, Böhler David, Freund Niklas, Mai (née Dressler) Inka et al. (2022-11)
Modelling the Influence of Material and Process Parameters on Shotcrete 3D Printed Strands:
Cross-Section Adjustment for Automatic Robotic Manufacturing
- Tay Yi, Ting Guan, Panda Biranchi, Wong Teck et al. (2022-11)
Towards Net-Zero in 3DP for Building & Construction