Roussel Nicolas¶

1. Caneda-Martínez Laura, Hassan M., Demont Léo, Keita Emmanuel et al. (2026-01)
   Fast Penetration Testing of Printable Concretes with a Portable Device:
   Robustness and Calibration
2. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
   Approach and Main Results:
   Mechanical Properties of 3D Printed Concrete
3. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2025-06)
   Concrete Printing Through Lace Pressing:
   Head, Shoulders, Knees and Toes
4. Denis L., Omikrine-Metalssi O., Karam-Cabrerizo R., Barnes-Davin L. et al. (2024-09)
   Impact of Very Early-Age Drying on Printed Concrete Microstructures
5. Keita Emmanuel, Zuo Wenqiang, Caneda-Martínez Laura, Aimedieu Patrick et al. (2024-09)
   X-Ray Tomography Insights into Early Drying Effects in 3D Concrete Printing
6. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2024-09)
   Zone-Based Analysis of Layer Deformation in 3D Concrete Printing:
   Shoulder, Steady-State, and Foot Zones
7. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
   Snapshot on 3D Printing with Alternative Binders and Materials:
   Earth, Geopolymers, Gypsum and Low-Carbon Concrete
8. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
   On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
9. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
   On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
10. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
    Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
    From Standard Casting to 3D Printing
11. Geffrault Anatole, Bessaies-Bey Hela, Roussel Nicolas, Coussot Philippe (2023-08)
    Printing by Yield-Stress Fluid-Shaping
12. Roux Charlotte, Kuzmenko Kateryna, Roussel Nicolas, Mesnil Romain et al. (2022-11)
    Life Cycle Assessment of a Concrete 3D Printing Process
13. Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
    Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
14. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
15. Kuzmenko Kateryna, Ducoulombier Nicolas, Féraille Adélaïde, Roussel Nicolas (2022-05)
    Environmental Impact of Extrusion-Based Additive Manufacturing:
    Generic Model, Power-Measurements and Influence of Printing-Resolution
16. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2022-04)
    Slow Penetration for Characterizing Concrete for Digital Fabrication
17. Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
    Layer Pressing in Concrete Extrusion-Based 3D Printing:
    Experiments and Analysis
18. Lowke Dirk, Mai (née Dressler) Inka, Keita Emmanuel, Perrot Arnaud et al. (2022-02)
    Material-Process Interactions in Particle-Bed 3D Printing and the Underlying Physics
19. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
20. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
21. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
    Properties and Testing of Printed Cement-Based Materials in Hardened State
22. Roussel Nicolas, Lowke Dirk, Buswell Richard (2022-01)
    Digital Fabrication with Cement-Based Materials:
    The RILEM D.F.C. Technical Committee
23. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
24. Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
    Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
    The Good, the Bad and the Ugly
25. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
26. Fataei Shirin, Secrieru Egor, Mechtcherine Viktor, Roussel Nicolas (2021-07)
    A First-Order Physical Model for the Prediction of Shear-Induced Particle-Migration and Lubricating-Layer Formation During Concrete Pumping
27. Ducoulombier Nicolas, Mesnil Romain, Carneau Paul, Demont Léo et al. (2021-05)
    The “Slugs-Test” for Extrusion-Based Additive Manufacturing:
    Protocol, Analysis and Practical Limits
28. Carneau Paul, Mesnil Romain, Ducoulombier Nicolas, Roussel Nicolas et al. (2020-07)
    Characterisation of the Layer-Pressing-Strategy for Concrete 3D Printing
29. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
30. Kuzmenko Kateryna, Féraille Adélaïde, Baverel Olivier, Roussel Nicolas (2020-07)
    Environmental Impacts of 6-Axis Robotic Arm for 3D Concrete Printing
31. Zuo Wenqiang, Dong Chenghao, Keita Emmanuel, Roussel Nicolas (2020-07)
    Penetration Study of Liquid in Powder-Bed for 3D Powder-Bed Printing
32. Zuo Wenqiang, Keita Emmanuel, Bornert Michel, Roussel Nicolas (2020-07)
    Drying of 3D Printed Mortar Filaments at Early-Age Assessed by X-Ray Computed Tomography
33. Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
    Numerical Simulations of Concrete Processing:
    From Standard Formative Casting to Additive Manufacturing
34. Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
    A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete
35. Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2020-04)
    Additive Manufacturing of Cantilever:
    From Masonry to Concrete 3D Printing
36. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
37. Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2019-10)
    An Exploration of 3D Printing Design Space Inspired by Masonry
38. Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
    Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials
39. Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
    Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
    Measurement and Physical Origin
40. Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
    Digital Concrete:
    A Review
41. Vandenberg Aileen, Bessaies-Bey Hela, Wille Kay, Roussel Nicolas (2018-09)
    Enhancing Printable Concrete Thixotropy by High-Shear Mixing
42. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
    The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete
43. Roussel Nicolas (2018-05)
    Rheological Requirements for Printable Concretes
44. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
    Digital Concrete:
    Opportunities and Challenges
45. Bessaies-Bey Hela, Baumann Robert, Schmitz Marc, Radler Michael et al. (2015-05)
    Effect of Polyacrylamide on Rheology of Fresh Cement-Pastes
46. Roussel Nicolas, Gram Annika (2014-03)
    Physical Phenomena Involved in Flows of Fresh Cementitious Materials
47. Thrane Lars, Brás Ana, Bakker Paul, Brameshuber Wolfgang et al. (2014-03)
    Computational Fluid Dynamics
48. Vasilić Ksenija, Geiker Mette, Hattel Jesper, Martinie Laetitia et al. (2014-03)
    Advanced Methods and Future Perspectives
49. Choi Myoungsung, Roussel Nicolas, Kim Youngjin, Kim Jinkeun (2013-01)
    Lubrication-Layer Properties During Concrete Pumping