Skip to content

2025-06

  1. Du Shizhao, Kang Chunxia, Du Xiuli (2025-06)
    Fatigue Performance of 3D Printed Reusable Concrete Slabs for Temporary Pavements
  2. Rusu Mihai, Ardelean Ioan (2025-06)
    Relations Between the Printability Descriptors of Mortar and NMR Relaxometry Data
  3. Zuo Zibo, Huang Yulin, Corte Wouter (2025-06)
    Real-Time Monitoring of Printed Concrete Weight During 3D Concrete Printing to Inversely Assess Process Stability:
    Indicators and Experiments
  4. Li Qiyan, Su Anshuang, Gao Xiaojian (2025-06)
    Improvement of Interlayer Performance of 3D Printable Magnesium Oxysulfate Cement-Based Materials by Carbonation Curing
  5. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
    Multiphysics Modelling of 3D Concrete Printing:
    From Material Model to Process Simulation and Optimisation
  6. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
    Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
    Material, Geometry, and Loading Perspectives
  7. Cui Weijiu, Ji Dongsheng, Shen Liang, Su Shiyong et al. (2025-06)
    A Neural Network-Based Model for Assessing 3D Printable Concrete Performance in Robotic Fabrication
  8. Guan Jingyuan, Wang Li, Bai Gang, Ma Guowei (2025-06)
    Enhancing 3D Printed Formwork Columns via FRP Hoop Shear Connection Reinforcement
  9. Nandurkar Bhupesh, Raut Jayant, Hinge Pawan, Bahoria Boskey et al. (2025-06)
    Multi-Scale Deep Learning Framework for Three Dimensional Printed Self-Sensing Cementitious Composites with Hybrid Nano-Carbon Fillers
  10. Alkhawaldeh Ayah, Alhassan Mohammad, Sawalha Ansam, Betoush Nour et al. (2025-06)
    Integration of 3D Printing and Machine Learning in Sustainable Construction:
    Feasibility and Challenges
  11. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
    Approach and Main Results:
    Mechanical Properties of 3D Printed Concrete
  12. Gasmi Abrar, Guessasma Mohamed, Davidovits Ralph, Pélegris Christine (2025-06)
    Unveiling Additive Effects in 3D Printed Geopolymer Composites:
    A Multi-Scale Analysis Coupling Rheological Insights and CFD-Optimized Deposition
  13. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process
  14. Kontovourkis Odysseas, Georgiou Christos, Andreou Alexis, Andreou Vasilis et al. (2025-06)
    Measuring and Evaluating Layer Height to Width Ratio in 3DCP Towards Higher Geometric Conformity
  15. Liu Shun, Yang Xiaobin, Wu Jianing (2025-06)
    Damage Evolution Analysis of Cement-Based 3D Printing Similar Materials Under Different Cyclic Loading-Unloading Conditions
  16. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
    Compressive Strength and Modulus of Elasticity:
    Mechanical Properties of 3D Printed Concrete
  17. Mishra Sanjeet, Upadhyay Bikash, Das Bibhuti (2025-06)
    3D Printing Aspects of Fly Ash and GGBS Admixed Binary and Ternary Blended Cementitious Mortar
  18. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
    Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
    Mechanical Properties of 3D Printed Concrete
  19. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Alhassan Mohammad et al. (2025-06)
    The Flexural Behavior of Engineered Cementitious Composites (ECC) One-Way 3D Printed Slabs Made of Solid and Hollow Sections
  20. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
    Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
    Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
  21. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
    Flexural and Tensile Strength:
    Mechanical Properties of 3D Printed Concrete
  22. Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2025-06)
    Winding Fiber Thread for 3D Concrete Robotic Printing
  23. Haar Bjorn, Kruger Jacques, Zijl Gideon (2025-06)
    3D Printed Concrete Pinned Beam-Column Connection Development
  24. Hanifa Mohamad, Mendonça Paulo, Figueiredo Bruno, Mahdy Deena (2025-06)
    Experimental Study on the Thermal Performance of 3D-Printed Earthen Wall Segment with Optimized Infill Pattern
  25. Huang Shuyi, Anton Ana-Maria, Dillenburger Benjamin, Xu Weiguo (2025-06)
    Lamella-Inspired 3D Concrete Printed Column-Slab System:
    Balancing Act for Productivity and Sustainability
  26. Keune Anna, Simšič Živa, Kloft Harald, Dörfler Kathrin (2025-06)
    AMC Edu:
    Lab Design to Learn About Additive Manufacturing in Construction
  27. Marco Giancarlo, Asta J. (2025-06)
    Neobrutalism:
    The Digital and Cultural Micro-Landscape of 3D-Printed Concrete
  28. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
    Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
  29. Saad E., Correa David (2025-06)
    Thermal Performance Improvement of Brick Design via 3D Printing
  30. Sakhare Vishakha, Khairnar Neha, Dahatonde Ulka, Mashalkar Shilpa (2025-06)
    Review on Sustainability in 3D Concrete Printing:
    Focus on Waste Utilization and Life Cycle Assessment
  31. Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part II: Moisture and Heat
  32. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
    Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
  33. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Advancing the Field of 3D Concrete Printing by Exploring the Use of Eco-Friendly Mortars
  34. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
    Enhancing 3D Printed Concrete Through Waste Fly Ash:
    A Comprehensive Approach to Sustainable and Efficient Mix Design
  35. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Significance of Nozzle Parameters for 3D Printing of Concrete
  36. Najm Omar, Alhassan Mohammad (2025-06)
    Implementation of Brucite in Alkali-Activated Materials Intended for 3D Printed Structures:
    A Fractional Factorial Design Approach
  37. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Awawdeh Najemaldeen et al. (2025-06)
    Mitigation of Energy Crisis Worldwide Using 3D-Printed Concrete with Phase Change Materials
  38. Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
    3D Printing of Conventional and Geopolymer Concretes:
    Advancements, Challenges, Future Directions, and Cost Analysis
  39. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
    A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
  40. Ma Jiayue, Samarasinghe Don, Rotimi James, Zou Kelvin (2025-06)
    A Review of Supply Chain Dynamics of 3D Concrete Printing Construction Practice
  41. Oseji Samuel, Chukwuemeka Prince, Imoni Okes (2025-06)
    Artificial Intelligence in 3D Printed Concrete:
    Sustainability Assessment and Implementation Challenges
  42. Sagyntay Mukhagali, Storch Florian, Mustafa Azamat, Plaschnick Paul et al. (2025-06)
    Automated Production of 3D Printed Сoncrete Structures with Integrated Reinforcement Mesh Based on Standard Reinforcement Bars
  43. Wijethunge Anjalee, Samarasinghe Don, Le An, Gajanayake Akvan et al. (2025-06)
    A Systematic Review on Sustainable 3D Concrete Printing:
    Opportunities and Challenges
  44. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
    Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
  45. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-06)
    Exploring Policy Influences on the Adoption of 3D Concrete Printing Technology:
    A Hypothetical Model
  46. Ding Shengxuan, Li Jiren, Liu Yiming (2025-06)
    Study on Mechanical Properties and Environmental Benefits of 3D Printed Lean Magnesium Ore Concrete Filled Columns Based on Three-Dimensional Meso-Structure
  47. Els Heinrich, Zijl Gideon, Villiers Wibke (2025-06)
    A Review of Shrinkage and Restrained Shrinkage Cracking in 3D Concrete Printing
  48. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2025-06)
    Concrete Printing Through Lace Pressing:
    Head, Shoulders, Knees and Toes
  49. Wang Xiaoqi, Zuo Tianyi, Xu Yanling, Liu Xing et al. (2025-06)
    Reinforcement Learning-Based Continuous Path Planning and Automated Concrete 3D Printing of Complex Hollow Components
  50. Jacquet Yohan, Kawashima Shiho, Spangenberg Jon (2025-06)
    Unveiling the Structural Build-up 3D Printable Cement-Based Materials:
    From Small Amplitude Oscillatory Shear (SAOS) To Extensional (SAOE) Rheological Workflows
  51. Mansour Ali, Abou Khalil Amine, Khoury Hiam (2025-06)
    Toward Spatial and Cognitive Human-Robot Interaction:
    A Game-Based Simulation for Concrete 3D Printing in Construction
  52. Placzek Gerrit, Dahlberg Maike, Thormählen Jan, Schwerdtner Patrick (2025-06)
    How Productive Is 3D Concrete Printing?:
    A Systematic Review
  53. Ribeiro João, Campos Tatiana, Brandão Filipe, Figueiredo Bruno et al. (2025-06)
    3DCP Composite Systems:
    Additive Manufacturing of a Concrete and Cellulose Interlocking Wall
  54. Shi Anqi, Lee Kah, Bo Sun, Koh Weng et al. (2025-06)
    Dimensional Effects on Shear Behaviour of 3D-Printed Concrete Shear Keys
  55. Sun Hou-Qi, Zeng Jun-Jie, Zhuge Yan, Liu Yue (2025-06)
    3D Printed Functionally Graded Concrete Plates:
    Concept and Bending Tests
  56. Ye Chengjie, Xu Jie, Lacidogna Giuseppe (2025-06)
    Fracture Behavior of 3D Printed Geopolymer Concrete Containing Waste Ceramic
  57. Divya M., Riza S., Shariff Najeeb (2025-06)
    Characterization of Cold Joint Formation in Digitally Printed Mortar During the Dormant Phase:
    A Time-Dependent Study
  58. Ewerz Johannes, Pfleger Marc-Patrick, Radl Elisabeth, Huber Patrick (2025-06)
    Concrete 3D Printing and Reinforcement:
    Determination of Bond Strength Through Pull-Out Tests
  59. Gailitis Rihards, Radina Liga, Pakrastins Leonids, Sprince Andina (2025-06)
    Mechanical and Early Long-Term Property Assessment of Foamed 3D-Printable Geopolymer Composite
  60. Galeote Eduardo, Claramunt Josep, Hermida José, Fuente Albert (2025-06)
    Influence of Fibers and Iron Dust on the Electrical Conductivity of 3D-Printed Concrete Mixes
  61. Garcés Gonzalo, García-Alvarado Rodrigo, Bunster Victor, Muñoz-Sanguinetti Claudia (2025-06)
    Additive Construction 4.0:
    A Systematic Review of 3D Concrete Printing for Construction 4.0
  62. Gomez Jaramillo Laura, Luković Mladena, Šavija Branko, Zhou Wen (2025-06)
    Recycled Sand for 3D-Printed Strain Hardening Cementitious Composite:
    A Review of Recent Developments
  63. Hermida José, Saavedra Ruth, Hidalgo-Astudillo Samantha, Tošić Nikola et al. (2025-06)
    Influence of Fine Recycled Aggregates on the Properties of 3D Printing Concrete
  64. Jendele Libor, Rymeš Jiří, Červenka Jan, Herzfeldt Michaela (2025-06)
    Time Dependent Modelling of Concrete for the Simulation of 3D Printing
  65. Lyu Xin, Ayough Pouria, Nawaz Waleed, Elchalakani Mohamed (2025-06)
    Development and Characterization of Printable Rubberised Ultra-High-Performance Concrete
  66. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
    Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
  67. Rajeev Pathmanathan, Kopitha Kirushnapillai, Sanjayan Jay (2025-06)
    Carbonated Water and MgO for Improved Performance of 3D Concrete Printing.
  68. Rajeev Pathmanathan, Nissanka Nilusha, Sanjayan Jay (2025-06)
    Experimental Study on Time-Dependent Pumping Behaviour of 3D Concrete Printing
  69. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
    Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
  70. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-06)
    Assessment of Post-Tension Capacity in Novel 3D-Printed Topology:
    Optimized Formwork via Load Transfer Testing
  71. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
    Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
  72. Tao Yaxin, Yuan Yong, Zhang Yi, Wangler Timothy (2025-06)
    Pore Structure Analysis of Printcrete Under Varying Temperature
  73. Zuo Zibo, Huang Yulin, Tao Yaxin, Yong Yuan et al. (2025-06)
    Analysis of Factors Influencing the Maximum Continuous Printing Height of 3D Printed Concrete
  74. Girskas Giedrius, Kligys Modestas (2025-06)
    3D Concrete Printing Review:
    Equipment, Materials, Mix Design, and Properties
  75. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
    Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
  76. Jalil Siti Nur Natasha Abdul, Rizal Alias Ahmad, Alias Aizat (2025-06)
    Challenges and Strategies in Implementing 3D Concrete Printing (3DCP) Technology in Malaysia:
    Materials and Design Codes
  77. Karamara Merve, Bogdanski Moritz-Ole, Zöller Raphael, Albrecht Sophie et al. (2025-06)
    Increasing Efficiency and Sustainability:
    A Comparative Analysis of Concrete 3D Printing and Traditional Methods Based on Case Studies
  78. Lamb Bannon, Sabih Gauhar (2025-06)
    Advancements in 3D Concrete Printing Materials
  79. Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
    Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
    A 3D Printed On-Site Load-Bearing Structure
  80. Musathik A., Ashfak M., Arif M., Samaraweera B. et al. (2025-06)
    Towards Smart Construction:
    Development of an Automated Small Scale 3D Concrete Printer
  81. Sbardelotto Eduardo, Vieira Manuel, Ferreira dos Santos Karyne, Pereira dos Santos Samuel et al. (2025-06)
    Exploratory Study on the Rheological Behaviour of 3D Printable Mortars Incorporating Fine Recycled Concrete Aggregates (FRCA)
  82. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2025-06)
    Enhanced Environmental Sustainability of 3D-Printed Concrete Mixtures Based on Calcium Sulfoaluminate (CSA) and Blast Furnace Cement (CEM III/B)
  83. Li Long, Ji Weiyi, Xiao Jianzhuang, Xiao Jie et al. (2025-06)
    Strategy for Improving Buildability of 3D Printing Concrete Using CO2 Mixing and Chemical Admixtures
  84. Mostert Jean-Pierre, Kruger Jacques (2025-06)
    Improving Shear and Flexural Performance of Macroscale 3D Printed Concrete Beams Through Filament Interlocking
  85. Alizamir Meysam, Kim Sungwon, Ikram Rana, Ahmed Kaywan et al. (2025-06)
    A Reliable Hybrid Extreme Learning Machine-Metaheuristic Framework for Enhanced Strength Prediction of 3D-Printed Fiber-Reinforced Concrete
  86. Duan Yuhang, Wang Chuan, Yin Binbin, Liew Kim (2025-06)
    Modeling Interfacial Failure in 3D-Printed Concrete via Peridynamics
  87. Mishra Sanjeet, Upadhyay Bikash, Das B. (2025-06)
    Exploring the Role of Metakaolin in Binary and Ternary Blended 3D Printable Mortars:
    Deep Insights into Printability
  88. Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    A Comprehensive Review of Rheological Dynamics and Process Parameters in 3D Concrete Printing
  89. Yao Jiaxu, Luo Jie, Qiu Minghong, Nagai Kohei (2025-06)
    Mesoscale Modeling of Anisotropic Compressive Behavior and Pull-Out Performance of 3D Printed Concrete with Steel Bars Using 3D RBSM
  90. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
    Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
  91. Mahdy Deena, Dara Seni, Abdelrahim Marwa (2025-06)
    Evaluating Structure Stability of Self-Supporting 3D Printed Earth-Based Cantilevers Using Robotic ARM
  92. Pham Thi, Nguyen Thi, Huang Jie (2025-06)
    Experimental Study on Anisotropic Mechanical Properties of 3D Reinforced Concrete with Discrete Polyethylene Fibers
  93. Surehali Sahil, Venkatachalam Akshay, Divigalpitiya Ranjith, Kumar Aditya et al. (2025-06)
    Ultra-Low Dosages of Novel Graphene Types Enhance the Rheological Properties and Buildability of 3D Printed Binders
  94. Cisowski Adam, Kowalik Michał (2025-06)
    The Influence of the Cross-Sectional Geometry on Stress Concentration in 3D Printed Concrete Elements:
    A Preliminary Study
  95. Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
    Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
  96. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
    Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
    Utilizing Fibers and Recycled Aggregates as Gradient Components
  97. Guillen Ruth, Naldoni Lapo, Quka Katerina, Gioia Flavio et al. (2025-06)
    Water Resistance of 3D Printed Clay with Bio-Stabilizers
  98. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
  99. Sonebi Mohammed, Kaushik Sandipan, Amziane Sofiane, Hamill Gerard (2025-06)
    Optimization of Rheological and Hardened Properties of 3D Concrete Printing
  100. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2025-06)
    Fresh and Hardened Properties of Cellulose Fiber-Reinforced Mortars for 3D Printing in Construction
  101. Tinoco Matheus, Toledo Filho Romildo, Mendoza Reales Oscar (2025-06)
    Rice Husk Bio-Aggregates for 3D Printing in Construction:
    Balancing Fresh and Hardened Properties
  102. Chen Qinbin, Barbat Gabriel, Cervera Miguel (2025-06)
    Finite Element Buildability Analysis of 3D Printed Concrete Including Failure by Elastic Buckling and Plastic Flow
  103. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
    Insights into Mix Ratios, Testing Procedures, and Material Behaviour
  104. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
    Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
    Insights from Damage Mechanics and Cohesive Zone Approaches
  105. Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
    Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures
  106. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng, Huang Zhongkai (2025-06)
    3D Printed Concrete Tunnel Lining:
    Comparative Study on Mechanical Properties of Curved and Straight Printed Specimens
  107. Rosa Marco, Brito Diogo, Vilas-Boas Rodrigo, Sousa José (2025-06)
    3DCP vs Conventional Construction:
    Comparative Analysis of Energy Performance and Embodied Carbon
  108. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
    Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
    Analytical Investigation and Numerical Modelling
  109. Zhang Ruo-Chen, Li Jiaxing, Liu Yiran, Huang Yimiao et al. (2025-06)
    Self-Healing Approach for Micro-Defects in 3D Printed Concrete:
    Microbial Community
  110. Makul Natt (2025-06)
    3D Concrete Printing
  111. Makul Natt (2025-06)
    Additive Manufacturing
  112. Pei Qiang, Zhong Yingzhu, Wang Shuai, Zhang Luxi et al. (2025-06)
    Interlayer Bonding Shear Performance and Constitutive Model of 3DPC with Different Fine Aggregate Gradations
  113. Su Yanli, Wu Chang, Shang Jiaqi, Zhang Pu (2025-06)
    Mechanical Properties of 3D-Printed High-Ductility Cementitious Composite with Sulphoaluminate Cement and Modified Crumb Rubber
  114. Álvarez-Fernández Martina, Guerrero-Miguel Diego-José, González-Nicieza Celestino, Prendes-Gero María et al. (2025-06)
    Mortars with Mining Tailings Aggregates:
    Implications for Additive Manufacturing
  115. Kumar Sandeep, Kumar Abhishek, Pundir Aakanksha, Dwivedi Ashutosh et al. (2025-06)
    Low-Clay Soil as Fine Aggregate in 3D Printed Concrete:
    Insights into Fresh and Hardened Properties