Salet Theo¶

1. Rangel Carolina, Salet Theo, Lucas Sandra (2025-12)
   A Design Methodology for Sustainable Lightweight 3D-Printable Concrete with SCMs
2. Deetman Arjen, Bos Derk, Lucas Sandra, Salet Theo et al. (2025-12)
   A Database Framework for 3D Concrete Printing
3. Gümrük Idil, Schröder Torsten, Wolfs Robert, Salet Theo (2025-11)
   3DCP-CI:
   Developing a Circularity Indicator for Assessing 3DConcrete Printed Architectural Designs
4. Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
   Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
   Part II: Moisture and Heat
5. Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
   Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
   Part I: Geometry
6. Hass Lauri, Bos Freek, Salet Theo (2024-12)
   Bond Governed Interactions Between Helical Reinforcement and 3D Printed Concrete
7. Dulaj Albanela, Peeters Sef, Poorsolhjouy Payam, Salet Theo et al. (2024-09)
   Combined Analytical and Numerical Modelling of the Electrical Conductivity of 3D Printed Carbon-Nano-Tube-Cementitious-Nano-Composites
8. Bos Derk, Lucas Sandra, Blaakmeer Jan, Salet Theo et al. (2024-09)
   Development of the On-Line Gravity-Induced Compression-Test:
   The Inverse-Slugs-Test
9. Gümrük Idil, Wolfs Robert, Schröder Torsten, Salet Theo (2024-09)
   Circular Design-Strategies for 3D Concrete Printing in the Built Environment
10. Rangel Carolina, Salet Theo, Lucas Sandra (2024-09)
    A Framework for Crafting Sustainable Lightweight Concrete in Additive Manufacturing
11. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
    A Data-Driven View on Digital Fabrication with Concrete:
    The Case of Inter-Layer Bond Strength
12. Wolfs Robert, Gümrük Idil, Driessen Saar, Ferguson Matthew et al. (2024-09)
    3D Concrete Printing and Circularity:
    Designing, Testing, and Modelling Dry Joints for Structural Applications
13. Deetman Arjen, Bos Derk, Blaakmeer Jan, Salet Theo et al. (2024-05)
    An In-Line Dye Tracer Experiment to Measure the Residence Time in Continuous Concrete Processing
14. Nefs Karsten, Sloots Joes, Kroon Kim, Bos Freek et al. (2024-05)
    Analytical Modeling of the Orientation-Dependency of 3D Printed SHCC at Increasing Levels of Scale
15. Rangel Carolina, Guimarães Ana, Salet Theo, Lucas Sandra (2024-03)
    3D Printing Lightweight Mortars with Cork to Improve Thermal Efficiency in Buildings
16. Nefs Karsten, Kroon Kim, Sloots Joes, Bos Freek et al. (2024-03)
    Orientation-Dependency of 3D Printed SHCC at Increasing Length Scale
17. Dulaj Albanela, Salet Theo, Lucas Sandra (2024-01)
    A Study of the Effects of MWCNTs on the Fresh and Hardened State Properties of 3D Printable Concrete
18. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
    Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
    Case Study of a Spiral Staircase
19. Wolfs Robert, Bos Derk, Salet Theo (2023-06)
    Lessons Learned of Project Milestone:
    The First 3D Printed Concrete House in the Netherlands
20. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
    Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
21. Nefs Karsten, Menkovski Vlado, Bos Freek, Suiker Akke et al. (2022-12)
    Automated Image Segmentation of 3D Printed Fibrous Composite Micro-Structures Using a Neural Network
22. Dulaj Albanela, Salet Theo, Lucas Sandra (2022-09)
    Mechanical Properties and Self-Sensing Ability of Graphene-Mortar Compositions with Different Water-Content for 3D Printing Applications
23. Hass Lauri, Bos Freek, Salet Theo (2022-09)
    Characterizing the Bond Properties of Automatically Placed Helical Reinforcement in 3D Printed Concrete
24. Dulaj Albanela, Suijs Monica, Salet Theo, Lucas Sandra (2022-06)
    Incorporation and Characterization of Multi-Walled Carbon Nanotube Concrete Composites for 3D Printing Applications
25. Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
    Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System
26. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
    A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
    The Case of a 29m Bridge in the Netherlands
27. Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
    Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
    The Good, the Bad and the Ugly
28. Hierden Naomi, Gauvin Florent, Lucas Sandra, Salet Theo et al. (2021-06)
    Use of Hemp-Fibers in 3D Printed Concrete
29. Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
    3D Concrete Printing:
    Free-Form Geometries with Improved Ductility and Strength
30. Bos Freek, Dezaire Steven, Ahmed Zeeshan, Hoekstra Anne et al. (2020-07)
    Bond of Reinforcement-Cable in 3D Printed Concrete
31. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
    Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
32. Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
    Elastic Buckling and Plastic Collapse During 3D Concrete Printing
33. Bos Freek, Wolfs Robert, Salet Theo (2020-06)
    CCR Digital Concrete 2020 SI:
    Editorial
34. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
    Mechanical Behavior of Printed Strain-Hardening Cementitious Composites
35. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
    Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
36. Ahmed Zeeshan, Bos Freek, Brunschot Maikel, Salet Theo (2020-02)
    On-Demand Additive Manufacturing of Functionally Graded Concrete
37. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
    The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
38. Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
    Digital Concrete:
    A Review
39. Wolfs Robert, Bos Freek, Salet Theo (2019-06)
    Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing
40. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
    Hardened Properties of 3D Printed Concrete:
    The Influence of Process Parameters on Inter-Layer Adhesion
41. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
    An Approach to Develop Printable Strain-Hardening Cementitious Composites
42. Bos Freek, Bosco Emanuela, Salet Theo (2018-11)
    Ductility of 3D Printed Concrete Reinforced with Short Straight Steel-Fibers
43. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2018-09)
    Large-Scale Testing of Digitally Fabricated Concrete (DFC) Elements
44. Wolfs Robert, Bos Freek, Salet Theo (2018-06)
    Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete
45. Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
    Rethinking Reinforcement for Digital Fabrication with Concrete
46. Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
    Design of a 3D Printed Concrete Bridge by Testing
47. Salet Theo, Ahmed Zeeshan, Bos Freek (2018-05)
    3D Printed Concrete Bridge
48. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
    Early-Age Mechanical Behaviour of 3D Printed Concrete:
    Numerical Modelling and Experimental Testing
49. Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
    Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete
50. Bos Freek, Ahmed Zeeshan, Wolfs Robert, Salet Theo (2017-06)
    3D Printing Concrete with Reinforcement
51. Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
    3D Concrete Printing:
    A Structural Engineering Perspective
52. Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
    A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
53. Ahmed Zeeshan, Bos Freek, Wolfs Robert, Salet Theo (2016-11)
    Design Considerations Due to Scale Effects in 3D Concrete Printing
54. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
    Additive Manufacturing of Concrete in Construction:
    Potentials and Challenges of 3D Concrete Printing
55. Wolfs Robert, Salet Theo, Hendricks Berry (2015-08)
    3D Printing of Sustainable Concrete Structures