Skip to content

2021-11

  1. Xu Zhisong, Li Zhuguo, Jiang Fei (2021-11)
    Numerical Approach to Pipe Flow of Fresh Concrete Based on MPS Method
  2. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
    High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
  3. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
    3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
  4. Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
    Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete
  5. Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
    The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite
  6. Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
    Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing
  7. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
    PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
    Mechanical Properties and Durability
  8. Jiao Dengwu, Shi Caijun, Schutter Geert (2021-11)
    Magneto-Rheology-Control in 3D Concrete Printing:
    A Rheological Attempt
  9. Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
    Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
  10. Ramyar Elham, Cusatis Gianluca (2021-11)
    Discrete Fresh Concrete-Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete-Flow
  11. Momeni Mahdi, Relefors Johan, Khatry Abubakar, Pettersson Lars et al. (2021-11)
    Automated Fabrication of Reinforcement Cages Using a Robotized Production Cell
  12. Nair Sooraj, Sant Gaurav, Neithalath Narayanan (2021-11)
    Mathematical Morphology-Based Point-Cloud-Analysis-Techniques for Geometry-Assessment of 3D Printed Concrete Elements
  13. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
    Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
  14. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
    3D Printed Concrete with Recycled Glass:
    Effect of Glass Gradation on Flexural Strength and Microstructure
  15. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
    Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
  16. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
    Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
  17. Giudice Lorenzo, Wróbel Rafał, Katsamakas Antonios, Leinenbach Christian et al. (2021-11)
    Physical Modelling of Reinforced Concrete at a 1:40-Scale Using Additively Manufactured Reinforcement Cages
  18. Izadgoshasb Hamed, Kandiri Amirreza, Shakor Pshtiwan, Laghi Vittoria et al. (2021-11)
    Predicting Compressive Strength of 3D Printed Mortar in Structural Members Using Machine Learning
  19. Liu Hanqiu, Egbe King-James, Wang Haipeng, Nazar Ali et al. (2021-11)
    A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression
  20. Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
    Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
  21. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
    Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
  22. Klein Lee, Holleyn Florian, Zimmer Sinje, Krause Olaf (2021-11)
    3DK Competence Center Investigates the Potentials of Contour Crafting
  23. Kocherla Amarteja, Kamakshi Tippabhotla, Subramaniam Kolluru (2021-11)
    In-Situ Embedded PZT Sensor for Monitoring 3D Concrete Printing:
    Application in Alkali-Activated Fly-Ash-Slag Geopolymers
  24. Liu Xuanting, Sun Bohua (2021-11)
    The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes
  25. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
    A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
  26. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
    Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
  27. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
    Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
  28. Pajonk Adam, Prieto Alejandro, Blum Ulrich, Knaack Ulrich (2021-11)
    Multi-Material Additive Manufacturing in Architecture and Construction:
    A Review
  29. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2021-11)
    Role of Chemical Admixtures on 3D Printed Portland Cement:
    Assessing Rheology and Buildability
  30. Tam Vo, Hien Do, Luan Phan, Tran Van et al. (2021-11)
    3D Concrete Printing-Material:
    Preliminary Study
  31. Bruce Mackenzie, Clune Gabrielle, Xie Ruxin, Mozaffari Salma et al. (2021-11)
    Cocoon:
    3D Printed Clay Formwork for Concrete Casting
  32. He Lewei, Tan Jolyn, Chow Wai, Li Hua et al. (2021-11)
    Design of Novel Nozzles for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  33. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
    A Hybrid Additive Manufacturing Approach:
    Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
  34. Shaker Aya, Khader Noor, Reiter Lex, Anton Ana-Maria (2021-11)
    3D Printed Concrete Tectonics
  35. Marczyk Joanna, Ziejewska Celina, Gądek Szymon, Korniejenko Kinga et al. (2021-11)
    Hybrid Materials Based on Fly-Ash, Metakaolin, and Cement for 3D Printing
  36. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
    A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
    The Case of a 29m Bridge in the Netherlands
  37. Anton Ana-Maria, Reiter Lex, Skevaki Eleni (2021-11)
    Strategies for Integrating Straight Rebar in 3DCP Columns and Shear Walls
  38. Becker Mirco (2021-11)
    Felt-Concrete Composites in Architecture and Design
  39. Block Philippe (2021-11)
    No Reinforcement:
    Compression-Only Structures
  40. Dittel Gözdem, Scheurer Martin, Dringenberg Steffen, Jitton Joaquin et al. (2021-11)
    Digital Concrete Production with Vertical Textile Reinforcement
  41. Freund Niklas, Lowke Dirk (2021-11)
    Inter-Layer Reinforcement in Shotcrete 3D Printing
  42. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
    Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
    Concepts and Initial Case Studies
  43. Ivaniuk Egor, Müller Steffen, Neef Tobias, Mechtcherine Viktor (2021-11)
    Strategies for Integrating Reinforcement Into 3D Concrete Printing at the TU Dresden
  44. Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2021-11)
    Automated Shotcrete 3D Printing:
    Printing Interruption for Extended Component Complexity
  45. Ledderose Lukas, Baghdadi Abtin, Kloft Harald (2021-11)
    Magnetic Alignment of Microsteel-Fibers as Strategy for Reinforcing UHPFRC
  46. Neef Tobias, Mechtcherine Viktor (2021-11)
    Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing with Concrete
  47. Orlinski Adam, Rycke Klaas, Heimrath Moritz (2021-11)
    Optimizing Reinforcement
  48. Pekuss Raitis, Ancupane Amelija, Soto Borja (2021-11)
    Quantifying the Complexity of 3D Printed Concrete Elements
  49. Placzek Gerrit, Brohmann Leon, Mawas Karam, Schwerdtner Patrick et al. (2021-11)
    A Lean-Based Production Approach for Shotcrete 3D Printed Concrete Components
  50. Slepicka Martin, Vilgertshofer Simon, Borrmann André (2021-11)
    Fabrication Information Modeling:
    Closing the Gap between Building Information Modeling and Digital Fabrication
  51. Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
    Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
  52. Park Jihun, Bui The, Lee Jungwoo, Joh Changbin et al. (2021-11)
    Inter-Layer Strength of 3D Printed Mortar Reinforced by Postinstalled Reinforcement
  53. Suiker Akke (2021-11)
    Effect of Accelerated Curing and Layer Deformations on Structural Failure During Extrusion-Based 3D Printing
  54. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
    Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
  55. Antoni Antoni, Agraputra A., Teopilus D., Sunaryo A. et al. (2021-11)
    Investigation of the Material-Mixtures and Fiber-Addition for 3D Concrete Printing
  56. Deshmukh Aparna, Heintzkill Reed, Huerta Rosalba, Sobolev Konstantin (2021-11)
    Rheological Response of Magnetorheological Cementitious Inks Tuned for Active Control in Digital Construction
  57. Douba AlaEddin, Kawashima Shiho (2021-11)
    Use of Nano-Clays and Methylcellulose to Tailor Rheology for Three-Dimensional Concrete Printing
  58. Fischer Gregor, Paegle Ieva (2021-11)
    Reinforcement of Three-Dimensional-Printed Concrete Structures by Weaving and Knitting of Continuous Fibers and Wires
  59. Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
    Additive Manufacturing on Building Construction
  60. Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
    Thermal and Environmental Benefits of 3D Printing on Building Construction
  61. Jacquet Yohan, Picandet Vincent, Perrot Arnaud (2021-11)
    Characterization of Tensile Behavior of Fresh Cementitious Materials
  62. Ko Lesley, Moro Sandro, Bury Jeff, Vickers Tom et al. (2021-11)
    Rheology and Setting Control of Concrete for Digital Construction
  63. Kondepudi Kala, Subramaniam Kolluru (2021-11)
    Extrusion-Based Three-Dimensional Printing Performance of Alkali-Activated Binders
  64. Kruger Jacques, Cho Seung, Bester Frederick, Rooyen Algurnon et al. (2021-11)
    Nano-Technology for Improved Three-Dimensional Concrete Printing Constructability
  65. Liu Yu, Jing Rui, Cao Fengze, Yan Peiyu (2021-11)
    Effects of Aggregate Content on Rheological Properties of Lubrication-Layer and Pumping Concrete
  66. Markin Slava, Schröfl Christof, Blankenstein Paul, Mechtcherine Viktor (2021-11)
    Three-Dimensional-Printed Wood-Starch Composite as Support Material for 3D Concrete Printing
  67. Murcia Heras, Abdellatef Mohammed, Genedy Moneeb, Taha Mahmoud (2021-11)
    Rheological Characterization of Three-Dimensional-Printed Polymer Concrete
  68. Nair Sooraj, Neithalath Narayanan (2021-11)
    Flow Characterization of Three-Dimensional Printable Cementitious Pastes During Extrusion Using Capillary-Rheometry
  69. Nespor B., Bohac M., Nejedlik M. (2021-11)
    Development of Rapid-Set Mortar for Additive Manufacturing
  70. Nishiwaki Tomoya, Miyata Yoshihiro, Furue Shoko, Fukatsu Shiko et al. (2021-11)
    Reinforcing Interlayers of Three-Dimensional-Printed Mortar Using Metal-Fiber-Insertion
  71. Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
    Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures
  72. Pattaje Sooryanarayana Karthik, Hawkins Kathleen, Stynoski Peter, Lange David (2021-11)
    Controlling Three-Dimensional-Printable Concrete with Vibration
  73. Rodriguez Fabian, Olek Jan, Moini Mohamadreza, Zavattieri Pablo et al. (2021-11)
    Linking Solids Content and Flow Properties of Mortars to Their Three-Dimensional Printing Characteristics
  74. Salleh Norhafizah, Jamalulail Nur, Abdul Hamid Noor, Jamellodin Zalipah et al. (2021-11)
    New Technology in 3D Concrete Printing by Using Ground-Granulated Blast-Furnace-Slag:
    A Review
  75. Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
    Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
  76. Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
    Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings
  77. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-11)
    Computational Investigation of Concrete-Pipe-Flow:
    Critical Review
  78. Wang Xiangyu, Khalil Abdullah, Celik Kemal (2021-11)
    Three-Dimensional Printability of White-Portland-Cement Containing Ceno-Spheres
  79. Wi Kwangwoo, Hong Jinxiang, Wang Kejin (2021-11)
    Determining Printable Zone of Three-Dimensional-Printable Mortar Using Flow-Table Tests
  80. Xu Emily, Tejada Karin, Walker David, Zivkovic Sasa et al. (2021-11)
    Measuring Flow- and Setting-Time for Three-Dimensionally Printed Mortar:
    Case Study
  81. Yuan Qiang, Zuo Shenghao, Li Zemin, Shi Caijun et al. (2021-11)
    Optimizing Three-Dimensional Printing Binder Composed of Ordinary-Portland-Cement and Calcium-Sulfoaluminate-Cement with Retarders
  82. Zhu He, Yu Kequan, McGee Wesley, Ng Tsz et al. (2021-11)
    Limestone-Calcined-Clay-Cement for Three-Dimensional Printed Engineered Cementitious Composites